No sounds from HP Envy x2 11-g010nr.

Yesurday it was working. I updated my PC now it's not working.
I'm using windows 8 32 bit

Also i know I'm suppose to download a program or something, I just don't know which program to download. Already tried to chact with HP, nothing.

Similar Messages

  • No sound from HP envy m6 1515tx after update

    I have updtaed my windows as regular update but after that no sound from speakers. laptop is showing everything is fine and all sound drivers all working fine so whenever i clicked on scan for hardware changes in device manager menu then speakesr starts wooking fine so every time i have to make that step to enable speaker
    help me
    already i have uninstalled drivers and updated with default updater but same issue occurs in next boot
    Help me
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

    Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
    Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
    Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

    Hi,
    Please try this first to enable Speakers in Playback devices as follows:
    1. Right click speaker icon (bottom right hand corner)
    2. Select Playback devices
    3. Right click HDMI sound
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Crackling sound from right speaker - Envy 14 Beats edition

    The right speaker on my Envy 14 Beats edition has a crackling/static sound when playing any sort of sound from it.  I assumed it was a faulty speaker since its just the right speaker..  I've talked to HP support and they had me send it in. 
    After two weeks I got it back only to find that they simply changed some audio configurations in an attempt to fix it.  Nothing has changed and the problem still exists. 
    Just wondering if anyone else has had this problem and if there is some sort of fix for this without me having to send it back to them to replace the speaker.  

    Hello tedebare73.  I understand your notebook is making a weird sound from the left speaker.
    Are there any other electronic devices (guitar amplifiers, cell phones, speakers) around the notebook?  These can all cause very strange noises.
    Try hard resetting the notebook as well.  Here are the steps.  
    Shut down the notebook.
    Remove the battery and AC power.
    Press and hold the power button for 10-15 seconds three times.
    Replace the battery and AC power.
    Verify whether the problem persists.
    Finally, if neither of the above have an effect try removing and reinstalling the driver.  Here are instructions.
    Go to your Device Manager.
    Expand the "Sound, video, and game controllers" section.
    Right click on your audio device and select "Uninstall."
    Reboot the notebook.  Windows will automatically reinstall the driver.
    Verify whether the problem persists.
    Let me know the results.  Have a wonderful day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Envy laptop confused about aux jack being plugged/unplugged; no sound from internal speakers

    So I was typing all normal like, didn't do anything stupid or weird, but suddenly the music I was playing through my laptop's internal speakers just stopped.
    And despite nothing being plugged in the auxiliary jack, the laptop thinks something IS plugged in and doesn't play sound through the internal speakers. So no sound at all.
    And on the flip side, when I plug headphones in the aux jack, the laptop says that "You have just unplugged a device from the audio jack" but then plays normally through the headphones. Internal speakers still silent.
    It's like the laptop suddenly got confused in whatever component registers the auxiliary connection, but I don't understand why it still plays through the headphones when it thinks there is nothing plugged in. And also why the internal speakers don't work AT ALL.
    It has Beats Audio, if that helps at all. I tried restarting, messing around with the sound settings but I honestly have no idea what I'm doing and anyways nothing has changed from that. 
    Anyways, yeah, help?
    This is a pretty new laptop, only about a month old.

    Hi @nematoda 
    Welcome to the HP Forums!
    It is a fantastic  place to find answers and tips.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you have lost  sound  on the internal speakers and when you connect headphones you get the message that you disconnected the device but then plays sound through the headphones.
    Here is a link to No Sound from the Speakers (Windows 8) that may help to overcome this issue.
    If this has not been resolved I recommend contacting HP support for assistance as the notebook is only a month old.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck !
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Sound from speakers & headphones is monaural NOT stereo HP Pavilion TS 15 Notebook PC Win 8.1

    My HP Pavilion TS 15 Notebook PC  is only 2 weeks old I found out soon after I got it that any test I do of the left and right speakers or headphones is not stereo.   When I click on the left speaker I hear the sound in the center and when I click on the right speaker I hear the sound in the center.  I have tried a test from the internet same results.   However, if I connect a bluetooth audio device then when I click on the left speak I hear the sound on the left only and when I click on the right speaker I hear the sound in the in the right only.  Also when I boot the computer with Ubuntu 13.10 there is stereo distinct sounds from either the left or right when I run the left right test. 
    At first and before I installed Ubuntu HP was sure it was a hardware problem and sent a tech out to install a circuit board which the headphone plug was on, thinking the jack was defective and mixing the left and right channels.   That didn't fix it.  I went to the Realtek website and ran their program which removed all traces of the sound driver and installed the newest one they had, didn't help.    Hp log into my computer and cruised around but found nothing wrong.   I have played with every sound setting there is, no change.   The final solution they suggest is to reinstall Windblows 8.1.  I really don't want to do this as I just did it to transfer from my win 7 notebook to this one using windows easy transfer.   FYI this computer is one HP sent me to replace the previous G6 Win 7 notebook which had unresolvable problems, worse than that this is the 3rd computer HP has send me to replace previous ones which each had their own set of unresolvable problems.  So I haven't had very good luck with HP computers!
    Anyway I am left with maybe a couple possibilities.   1. Reload windblows, I cannot use easy transfer because it no longer works on win 8.1 (maybe file history will work though I'm not sure)   2. Try windows refresh which won't remove as much of what I have installed.   3. Maybe someone has experienced a similar problem and can share here.
    Any help is appreciated.
    Michael
    UPDATE:
    HP wanted me to do a clean reinstallation of Win 8.1, sent me the disks to do it, but the disks were defective and wouldn't go on to the second disk.   I used the Disks I had made from the computer they worked and the reinstallation was completed.   That didn't resolve the problem!   They decided to send me a replacement computer.
    The new computer is a  HP ENVY TS 15 Notebook PC with win 8.1 updated.   Same problem except the speakers seem to be in stereo but the headphone jack is still mono.   I chatted with HP last evening and was told this is a "Known problem and the fault of Windows 8.1"    Can someone tell me if this is true?    I have doubts but really want to know.
    Michael

    Hp replaced this computer for me due to this problem, however, the Envy (dumb name) they sent me to replace it had the same problem.   I did fine a solution and here is the web address http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/envy-17-headphones-in-mono-not-stereo/td-p/...
    Read down a few posts for the solution by making changes to the registry.   But, my problem and the solution was with a win 8.1 computer and I do not know it it applies to Win 7.  Unless, you have the same sound card and driver, which I doubt.  If you haven't removed the sound card driver and reinstalled it with the one on the HP website do try that.
    Good luck.
    Michael

  • Why is the sound on my Envy not working?

    Why is the sound on my Envy not working?  Checked all volume levels, mute, settings etc.

    Hello NellyMac,
    You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
    Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • No sound from front or read audio jack

    I am using an 810-230qe Phoenix Envy with WIndows 8.1 Pro. I am unable to hear sound from the front headphone jack or the rear audio jack. Speakers also do not work from the rear jack. I have an HDMI cable connected to my monitor, however, I went into the NVIDA controls and disabled sound for that. 
    I have uninstalled the driver and then reinstalled. No luck with either jack. Headphones work in all other devices. I have even tried different headphones. This is a new computer, just a few days old and this is the first time I tried to use sound. 
    Any ideas?

    Hello aloehnert,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having audio issues on your HP ENVY Phoenix 810-230qe CTO Desktop PC. You stated that you disabled the audio on your monitor does that mean it worked before you disabled it? Has the audio ever worked on this and is just not working now? If you go to the control panel and click on Sounds what devices do you see there and are they Enabled or Disabled?
    If you could answer these questions it would help a great deal in getting you  a possible solution. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HDD clicking sound in new Envy 4-1102ss

    Good day
    I have just bought Envy 4-1102ss whith Hitachi HDD with 500GB and 32 SDD HD for caching but I noticed small clicking sound from the HDD especially when the HD is ideal but while reading or writing there is no clicking sound, is this normal issue?

    Hello abd09119.
    I noticed that you posted this twice so I wanted you to know I responded to your other thread here.
    Have a good day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How do i use my apple express speakers as the sound from apple tv?

    how do i use my apple express speakers as the sound from apple tv?

    Welcome to the Apple Community.
    You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

  • No output sound from output port/analog audio: Need help

    hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

    I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
    plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
    For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
    i hope this works for you. good luck and have a good new year.

  • What do I need to get better sound from my Mac mini

    The sound from my external speakers is very poor. I am hard of hearing(50% in one ear) and I find it very difficult to follow a conversation etc.
    I am now on Yosemite, and the speakers have been used on all my previous  pc's successfully. I cannot find a control for the built-in audio, does one exist?

    What do you mean by poor sound?
    The Sound is controlled by System Preferences>Sounds>Output

  • I've connected my ipad to my TV via hdmi but cannot get sound. Is there a way to get sound from the TV?

    I'd like to get sound from the tv for my keynote presentations. Is there a way to do this via the hdmi connection? Or do I need to connect an 'audio-out? Thanks in advance for your help

    the hdmi should transfer both sound and picture
    http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=a8e08a2bb3c16bf3cd606aecff68b12c10fe327cd7b063c9bbc492e57158bbfa0778 d5b941eb2a8c1c5f2e25e51cf7b82e193c9a722651b3fc2694996f7b5281b8bf4338c46284247b76 ccce6907fa6caee062d974158ee4d0336fca558384426e7a6c6cbf3ee58c8f53f8db53c9ef91
    Supports multi-channel digital audio output on compatible devices
    make sure your ipad is not muted
    make sure you volume is not all the way down
    make sure audio play out of the ipad when not connected to the hdmi adapter
    if you did and it don't work then it's likely an issue with the connetor
    or the tv or it's settings

  • No sound from optical output when using hdmi/dvi cable

    I am trying to connect my apple tv2 to my B&O Beovision 7. I have used an HDMI to DVI cable which is working fine for the picture; but obviously DVI does not carry sound. I have therefore connected an optical cable to the digital optical output on the apple TV and put this through a converter to digital coax, which then goes in to the TV. I know the optical cable / converter set up works fine as I have tested it on my sky box and it works fine. But I get no sound from the apple TV - any ideas?

    I hav exactly the same problem... Did you resolve this??

  • No sound from the TV when using HDMI cable, No sound from the TV when using HDMI cable

    I recently purchased HDMI cable and adaptor, so that I can play downloads from my Macbook Air on my TV. There is only sound from the Macbook, not the TV - Do I need as separate cable for sound?

    I've got the same issue: when I connect my Macbook Air (2011) to TV via HDMI cable there's no sound through the TV system, only from the Macbook Air. I used to use my older Macbook Pro with the same HDMI adapter and it worked just fine, but not with the Macbook Air it doesn't.
    My software is up to date. I tried to select the TV as an output option in sound preferences, but it doesn't yield any results.
    Rebooding multiple times doesn't help either.
    Any suggestions on how to tackle this problem?
    Thanks in advance.

Maybe you are looking for

  • How do I delete all my emails in one go on iPhone 5 s

    I'm trying to delete all my old emails sent from my old I phone 4s to my new one via iCloud. How do I delete them all in one go on I phone 5s instead of marking them all individually?

  • Sync between iphone and Outlook not working

    When i was on itunes 9 using i phone version 4 and 4.01 everything was fine, as soon as the latest iphone firmware update happened it all went wrong. When i try to Sync outlook contacts or Calender it says would not do it and just freeze. So i follow

  • Only one instance of my transaction works - CICS ART

    I have been able to deploy a CICS application on Tuxedo ART 11gR3 on RHEL 5. But I can only access the application thorugh 1 Tn3270 window. Until I finish the applictaion, I cant use it from the 2nd terminal window. I am trying to figure out how can

  • Problem with creating f60runx executable.

    Hi, I am trying to compile and create f60runx executable to create runtime version to include the user exists. For some reason I am getting an Undefined symbol error. To compile this I am using ins_form60w.mk and env_forms60.mk from /oracle/dev60 dir

  • What is Flash 3D format import in Photoshop CC ?

    Hi, Photoshop CC introduce Flash 3D format import. What kind of file does it use ? Is this 3D properties animated inside Flash timeline ? FLA and SWF files seems not compatible. Waiting for instructions. Thanks.