No source signal after running an upgrade from Vista to Win7

I have an HP S2031 monitor and I am getting a No Source Signal message after I ran an upgrade from Vista to Win7 operating system.
Computer is running and all cables are connected properly.

Seems like it is not a monitor problem.
Disconnect hard disk and disassemble the memory RAM.
Switch on the pc, then switch it off again.
Re-connect hard disk and ONE RAM stick only.
Retry boot with one stick after the other.
Which pc do you have?
Do you have an additional graphics card?
Which output port do you use for the graphics.
How is it connected to the monitor?
Which port at the monitor side?
*** Say 'Thanks' with Kudos ***

Similar Messages

HP Solution Center doesn't work after upgrade from Vista to Win7 64b

Two problems. 1) Upgraded Dell 1737 Notebook from Vista Home Premium to Windows 7 64b. HP Solution Center no longer works. Have HP Officejet Pro 8500 A909a printer hardwired into router. Downloaded new printer drivers, still cannot print. 2) Cannot get Solution Center to execute. Message says can't find "SolutionCenter.msi". No Win7 upgrade for Solution Center on HP site.

Hello ReallyFreeBob,
Lets first try Uninstalling the existing printer software using the listed steps..
Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
After the uninstallation is done you may have to restart the PC.
Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Satellite L300 - cannot upgrade from Vista to Win7

Hi,
i have a problem i bought the Satellite L300 (windows vista home premium was installed , i had to buy the windows upgrade 7 from toshiba which i did and installed with no problem at all .
But now after having to use the recovery cause i got a virus on my machine it went back to windows vista .
Now when i try to run the upgrade 7 cd it gives me a message (the model does not support windows 7 upgarde ) how could that be since i already had it on this system before ?
Can someone help me tp fix the problem or give me an explaination on why its doing that ?
thank you .

Hi
Here once again the link posted by Paolo:
+*Windows 7 upgrade: Step-by-step Upgrade Guide*+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm
You need two disks:
- Toshiba Windows 7 Driver and Software Upgrade disc
- Microsoft Windows 7 Upgrade CD
Here the whole procedure:
+Upgrade Guide with Toshiba Win7 Driver Upgrade DVD and Microsoft Windows 7 Upgrade+
1. Toshiba recommends a clean installation of Microsoft Windows Vista.
Please store all your Data to an external HDD or other storage Media and recover your notebook.
2. After this, the drivers for the upgrade can be installed. Please insert the Toshiba Windows 7 Driver and Software Upgrade disc.
This disc contains a tool which automatically uninstalls all spuriously moduls and afterwards it installs all necessary drivers for Windows 7.
While this process is running, the computer may reboot sometimes.
If any messages appear on the screen, please follow them and take actions if needed.
3. If the driver installation is completed, please insert the Microsoft Windows 7 Upgrade CD and start the Upgrade.

CS4 challenge after upgrading from Vista to Win7

went thru a nightmare having Win7 installed. was a clean install. now can't get CS4 to install. did the adobe helper thing and remove whatever was listed in the programs left from CS4. (I do have elments 7 installed, but that has not been an issue) it reviews everything and then says contact customer service.i found them less than helpful so far. any clue?

If the clean install was done without a format, there's a folder on your C: drive named Windows.old.
This was the case with my 7 install and I had to delete the Windows.old folder to get things going.
Mike

Is possible for laptop hp pavilion tx1106au upgrade from vista to win7?

My laptop model is tx1106au and preinstalled vista home premium 32bit. Recently I had bought windows 7 home premium 32 bit software and I want to upgrade, however, when I run the Windows 7 Upgrade Advisor, the report is have twoissues as below:
HP Quick Launch Buttons, currently the version I used is 6.10B9, which version shoudl I update?
VeriSoft Access Manager, now the version 2.1, the hardware driver is AuthenTec Inc. AES1610, version is 7.9.
Is there someone can do me a favour to help me solve the issues?
Thanks in advance, my location is in China, so I prefer the software and application have english and chinese (simplified) edition. My personal mail is [email protected]

Hello ReallyFreeBob,
Lets first try Uninstalling the existing printer software using the listed steps..
Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
After the uninstallation is done you may have to restart the PC.
Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

After upgrading from Vista 64 64 bit to Window7 64bit the DVD stopped working

After upgrading from Vista 64 64 bit to Window7 64bit the DVD at first worked just fine but after about 7 months it just stopped responding as if the hardware as in the DVD Dive it compatible with Windows 7. I have reinstalled the full Windows 7 that I got from HP but it still has the same problem and when I try a full recovery it will start to read the recovery DVD but it take way to long like 15 mins just to start reading and it stops reading with error's after about 2 min's into it.
Were is the errors that I get
This PC in not supported by the system recovery disc. you will not be able to continue to recover this system with these disks.
keep in mind that the problem lies with the DVD drive not working and like stated above it will work if Windows Vista 64 is installed so this error message is not the key to the problem just part of it.

Fixed the mic issue by running Windows Update and installing the latest audio drivers.
AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio
Installation date: ‎11/‎1/‎2009 8:35 AM
Installation status: Successful
Update type: Optional
AnalogDevices Audio software update released in June, 2009

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

Can I remove photoshop cs2 after I have upgraded from cs2 to cs5?

Can I remove Photoshop CS2 after I have upgraded from CS2 to CS5? I upgraded from CS2 to CS5 quite a while ago and I have never removed CS2. Will it affect CS5 to remove the old CS2 if it was an upgrade?

If I were you I would just delete the installed Adobe CS2 folder. Adobe CS2 uninstaller my remove settind CS5 made to your system after CS2. The CS2 uninstaller may try to restore settings to a point in time where there was no Photoshop installed on your system. If you do a CS un-install you may need to then Install CS5 on top of itself the update cs5 for the install will not have the updates you will be back at CS5 level .

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

After trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore

after trying to upgrade from 4.3.4 to 5.0 stuck on recovry and giving error every time im trying to restore
what to do ?
tried tiny umberlla dost do anything

What OS is on the Install/Restore DVD that came wit your G5? If Tiger 10.4.x, you will need a black, retail Leopard install DVD. There is no free download of Leopard, only free updates once you have installed the base OS.
First use your Mac's Install/Restore DVD to install an OS & apps. Then upgrade the OS.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

HT201263 is it possible to undo changes to your iphone content and settings after running the restore from backup function?

is it possible to undo changes to your iphone content and settings after running the restore from backup function?

no

Monitor HP w2338h area shrank after upgrade from vista 64 to 7

Monitor HP w2338h area shrank By 3/4in both sides &1/2in top & Bottom after upgrade from vista to 7 Tried settings to max resolution On HP Pavilion a6857c Please Advise, I also reloaded the drivers for my Video card a ATI Radoen 5450 HD and all updates for windows 7 home Premeium 64bit & HP updates
This question was solved.
View Solution.

Glad to help!
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Cleanup after upgrading from Vista to Windows 7

I have installed (upgraded from Vista) Windows 7 on my X301 machine. I am wondering if thedata on the drives Q(lenovo) and S(Servicev003) is still needed?

only if you want to recover to vista the Q partition is used for creating recovery disc the s partition is used for recovering to factory state which would be vista
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

No source signal after running an upgrade from Vista to Win7

Similar Messages

Maybe you are looking for