No speaker after 3.1.2 upgrade

My ipod touch recently upgraded to 3.1.2 software, and for some reason i can't seem to play music from the built in speaker anymore. When I play music, I don't see a volume bar control, and there is no response to the external volume controls. However when i plug in headphones or an audio jack, the volume bar reappears and the external volume controls work again. I unplug, and they disappear.
what is wrong?

OK, I think I was able to resolve my issue. It seems like because I had removed it from my ipod docking station, the iPod thought it was still in the dock (it displayed something about "dock mode").
Found out if you restart it, the sound returns. And if you power down the docking station before removing the iPod, it seems to work just fine with it's built in speakers.
Hope that works for you too.

Similar Messages

Only "Headphones" sound, no speaker sound after 4.2.1 upgrading

After I had finished upgrading 4.2.1 firmware for my iPad, the speaker's sound has gone.
I can hear the sound from my iPad only when I connected to any headphones or bluetooth devices.
I tried many methods to get the sound back, starting from:
1. trying to plug in and out my headphone - nothing changed
2. switch on and off from the mute button (former is lock button) but it only showed "Headphones" or "Mute" sign.
3. shut down and turn on my iPad - nothing changed
4. Hard Reset my iPad and Restore - Still no sound, but I had to re-install everything again
5. Ask everyone and search every "no sound from iPad" topics but found none like mine.
However, while I upgraded the firmware, I noticed that I "locked" the screen during the process and I heard someone in the internet told me that it might be the origin of my problem.
I tried to sync my iPad and find how to re-upgrading the firmware again with no "locked" the button but there is no way to.

I've been having this problem for several months and just found this thread. Unfortunately the solution isn't well spelled out, but I was able to resolve the issue.
To recap:
Problem: Many/most non-Apple Apps have no sound from the iPad internal speaker. Plugging headphones in provides sound from all apps. Apple Apps (youtube, music, video, safari, etc) continue to function and play sound out of internal speakers normally.
Resolution: This issue appears to be related to the 'mute' / screen orientation lock button. If your iPad mute switch was on mute when you switched it to orientation lock, 3rd party apps will remain muted via internal speakers no matter what you do. Luckily an easy fix: Go Settings -> General and switch from 'lock rotation' to mute. Slide the switch to the non-muted position. You can now switch back to 'lock rotation' and your apps will play sound from the internal speaker again!!!

Stack Underflow and Archive Install fail after 10.4.9 upgrade

After performing the 10.4.9 upgrade on my Black MacBook Core Duo, each of the Microsoft Office Applications (Word, Excel, Entourage, Power Point, and Office Updater and Office Installer) all abort on activation. The System Log indicates a stack underflow:
Mar 24 11:36:38 Arakis /Applications/Microsoft Office 2004/Microsoft Word: CGGStackRestore: gstack underflow.
Attempts to reinstall office fail. Drag and Drop method and Using Office Installer App both fail. The Installer App also aborts with the same error.
After speaking with Microsoft Support and trying their suggestions for removing prefrence files and MS user directory, all fail with the same results. Last Microsoft reccomendation is to perform Archive and Install, and upgrade only to 10.4.8 using combo update.
So I Cloned my boot disk before performing Archive and Install (and it's a good thing too).
I started the Archive and install, and all went well until disk 2, specifically while it was installing iLife demo. When it said two minutes remaining, it froze. Last log entry indicates "specified processes cannot be found". I left it to continue overnight (about 8 hours). It was in the same state in the morning. So I forced a Power down and restarted. It requested disk 1 and began the Archive and Install again, with the same results.
I was able to boot off my external clone and restore my boot disk. I am now back to 10.4.9, and Office apps still abort with stack underflow.
One other point. I have a G4 iMac, A Dual G5 Power Mac, and a G5 Mac Mini, all with 10.4.9 and MS Office, and they all work fine. Problem only seems to be on DualCore MacBook, and only Microsoft Office Apps. MS messenger and MS Remote Desktop Client for MAC work. All other apps (apple and 3rd party) also work OK.
One last thing. After 10.4.9 upgrade, Finder quite often crashes when right clicking or Cotrol-clicking on files or folders in finder windows. Looking at crash dump indicates that this is an unrelated issue, which I will address later, in another rpost.
Are there any suggestions on how to sucessfully perform an archive and Install? Is it possible to disable the install of optional software like iLife demo? Any other suggestions would be appreciated.
Jeff Cameron
DualCore MacBook Mac OS X (10.4.9)

After spending a bit of time, researching this problem, it seems I have been bit by the dyldupdateprebinding bug while updating to 10.4.9. This is outlined in the article located at:
http://www.unsanity.org/archives/macos_x/shock_andawe.php
However I am still unable to repair my problem by performing an Archive and install (possibly because of the dyldupdateprebinding). So if anyone can help me do the Archive & install without installing the iLife demo, or any of the optional software, I would be most appreciative.
Jeff

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

Dictation problems after ios 8.2 upgrade

I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
    1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated! Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
    2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
2. In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox. That means I HAVE to type n I stink at that. To reproduce I simply:
1. press the microphone.
2. Type in only numerics 1 thru 17....it will dictate to look like this: 123 456-789-1011 1213 1415 1617
3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
4. press the microphone
   5. "Beep/dong" noise because it wont let you dictate any more of anything said.
I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
I Have not trieddictation on my mac...yet.
CAn someone help on these issues please? Thanks!

Hey Markwoody,
Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/ht201559
How to reset
- You should reset your device as a last resort and only if you can't restart it.
- To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

My photos are out of chronological order after the os 5 upgrade. How can I get them back in order?

My photos are out of chronological order after the os 5 upgrade. How can I get them back in order?
If its not possible, how do I go back to the old os?

I had tried that several times with no luck. Late last night I was finally able to get through to the Verizon technical support who then called in Apple technical support. It took 1 1/2 hours for them to figure it out and guide me through a fix. So here's the deal .......... I use Yahoo mail and had left the "contacts" button in the on position. Apparently Yahoo likes to go into your contacts and gather information and can leave it in shambles. My advice is, go to settings, then mail, contacts, calendars. Select any and all of your email accounts and go in and turn off their access to your information. Leave it on for Icloud but none of the others.

Low memory iPad 2 after 8.1.1 upgrade

ipad2 after 8.1.1 upgrade receive low memory warning when using a link to another website from a website. Has anyone seen this?

Hey there saint38,
I you are still getting this error message when opening links in the Safari app, I would next quit all the running apps on your device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Cheers,
Sterling

My iPad will no longer connect to my Sony wireless speaker after downloading the latest IOS software. It worked perfectly before. I have reset and reinstalled the speaker through NS setup but still no joy. Any advice would be most welcome.

My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.

Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP.

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems After Win 8.1 Upgrade - Two Additional Partitions Both With Same Volume Serial Number?

An update from Win 8 Pro to Win 8.1 Pro has occurred automatically on one of my machines.
Prior to the upgrade (from memory) the machine had an OEM Partition (40MB), EFI System Partition (500MB), Recovery Partition (8.17GB) and OS (C:) partition. Only the latter was visible in Computer.
After the 8.1 upgrade there are two additional partitions, Recovery (500MB) and Recovery (450MB). All the partitions are now displayed in This PC as drives except the 40MB OEM Partition.
When viewed in This PC both the two new drives (that appear to equate to the new partitions) show as 499MB each with the same amount of free space. In Disk Management the first new partition is shown as 500MB and the second as 450MB.
I have SugarSync installed on this machine and since the upgrade it is displaying an error telling me it won't work because the two new drives have the same Volume Serial Numbers.
Clearly something has gone wrong with the upgrade:
Is there any way to resolve the Volume Serial Number conflict?
Is there any way to stop all these drives appearing in This PC?
Do I need the two new partitions and if not how can I get rid of them?

There is a fourth path to upgrading to Windows 8.1 provided by Microsoft. Microsoft have been displaying automated reminders from time to time on Windows 8 computers that Windows 8.1 update is available to download - from these reminders it is possible to
choose either Install or Not Now. Just recently these reminders have changed, they are instead notifying the user that the Windows 8.1 Update will be installed automatically or the user has options to postpone the installation for 1hr, 2hrs, etc. The
user of this computer tells me she went away from the machine and Windows 8.1 update installed automatically from one of these prompts.
I have seen these installation prompts on several of my customer's computers and they are not malware related (I deal with malware removal every day and would recognise this). However, I have scanned this computer with Bit Defender and MalwareBytes and there
are no infections present.
The only difference between this Windows 8.1 Update and the others that I have carried out is that it wasn't controlled and therefore I wasn't able to disable the security software (Bit Defender Internet Security 2015). This may be the cause of the problem.
I've uploaded the two screenshots you asked for - the two new drives are W: and Z: and SugarSync is reporting that they have the same Volume Serial Numbers. Note: X: and Y: were not visible prior to the upgrade.
There are two Windows Update logs at C:\Windows\ so I will upload both.

Satellite P850-31L thinks Intel HD GPU driver is old after Win 8.1 upgrade

Hi there,
I have had my Satellite P850-31L since last year and recently updated to windows 8.1.
This laptop has a NVIDIA GeForce GT 640M graphics card and it use to say that on my dxdiag.
Since updating to windows 8.1 my laptop seems to think I have a Intel HD Graphics 4000 and apparently it's out of date.
When I go on their site to test for the update.
I got told my graphics card is 'up to date' yet every thing else - including my toshiba driver manager says it's out of date.
I've tried updating yet I keep getting a message saying my system setting aren't good enough.
Anyne got any suggestions on what i can do.
Can I get my laptop to stop thinking it has a intel graphics when it has the NVIDEA chip

> defterniko
After Windows 8.1 upgrade you should visit the Toshiba EU driver page and should update the drivers and utilities to the Windows 8.1 version.
Most people forget to do that they update the system from Windows 8 to Win 8.1 but dont update the drivers.
As mentioned by user IronMan; the installation instruction which is available on the Toshiba EU driver page shows you the driver and tool which needs to be updated and you should also follow the installation order mentioned in this instruction.

No speaker after 3.1.2 upgrade

Similar Messages

Maybe you are looking for