No speaker sound from iPad

Does anyone know a fix for speaker sound lost with apps, headset works fine, as does music?

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Similar Messages

VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
Message Edited by hussain on 06-10-2009 10:26 PM

Just want to add another relieved reader of this thread. I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones. The next morning--no speaker sound.
I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack. But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.
Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
When I put it to sleep again and fired it up--Sound! I am so glad to find this solution so I just want to let people know it remains a viable option.
Doug

Streaming all sound from ipad to mac mini

Hi
I use several apps and sites on my ipad to look for and discover new music
Id like to find a way to stream all the sound from the ipad to my macmini, which is connected to my sound system
Is it possible and what do i need to do
Thanks

you can do it wired by connecting a minijack cable from the headset connector of the ipad to the mic/line in on the mac mini
or you can look for some software which makes the mac act as a bluetooth speaker setup (A2DP) and connect the ipad to it

Bluetooth Headset does not play sound from ipad touch 4th gen. ipod touch 4th gen. although it does pair ok! Please help!

HM1200, BH99b, JabraBT2045 bluetooth headsets do not play music from ipad, ipod touch 4th generation, although it does pair ok. Why is that if it is compatable, why it does not play any music or sound via bluetooth headsets. When I pair the headsets to Mac it does play music via bleutooth headsets! Please help me! Also, how to connect several or two bluetooth headsets to one device: Mac, or iPad iPod touch 4th generation? Please, reply as soon as possible!

Your iPad has built-in WiFi. You cannot and don't need to use the USB dongle.
Look in Settings > WiFi. Find the SSID of your wireless router, tap it's name and enter the WiFi password.

How to invoke Speaker Sound from Forms 6i

Hai friends
I want to give some alert sound from the Builtin
computer speaker. In Visual Basic we can make like Chr(7)
How can i accomplish this in Forms6i. Pls reply.
I use BELL builtin it is not working.

And also this one:
Problem Description
Installed Forms 6i Rel 2 on a MS Windows machine. When trying to Import the Java
Classes getting the errors
PDE-UJI0001 Failed to create the JVM
Solution Description
You need to to install JDK 1.2.2 to run the Java Importer. And set the PATH's
and classpath's correctly.
Explanation
1. Download and install the JDK 1.2.2.
Possibly available at: http://java.sun.com/products/archive/
2. Assuming the JDK 1.2.2 is installed in c:\jdk1.2.2 directory and the JRE in
C:\PROGRA~1\JAVASOFT\JRE\1.2 directory; ORACLE_HOME=C:\Dev6iR2.
Set the PATH to
set PATH=c:\jdk1.2.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin\classic;%PATH%
( If you are using ias9i then the JDK 1.2.2 comes with the ias installtion ,
in this case please set the PATH to
D:\ias9i\Apache\jdk\bin;D:\ias9i\Apache\jdk\jre\bin;D:\ias9i\Apache\jdk\jre\bin\classic;%PATH% )
3. Set the CLASSPATH to set CLASSPATH=%CLASSPATH%;C:\Dev6iR2\TOOLS\COMMON60\JAVA\IMPORTER.JAR;.
(If you do not set the CLASSPATH correctly you will get the error
PDE-UJI002 Unable to find the required java importer classes)
4. Now run the Forms Builder by using the command.
C:\Dev6iR2\bin\ifbld60.exe
Now the Java Importer Should Run fine.
Francois

How to invoke Speaker Sound from Forms

Hai friends
I want to give some alert sound from the Builtin
computer speaker. In Visual Basic we can make like Chr(7)
How can i accomplish this in Forms6i. Pls reply.
I use BELL builtin it is not working.

how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers

HT4085 My volume control indicates headphones not speaker. No sound from iPad. Have checked the mute button is off and button is set to operate lock rotation. Any suggestions?

The iPad sound is not working and the volume control shows headphones rather than speaker. Mute is off and I cannot see any reference to headphone/speaker settings or switch. Any suggestions ?

Most likely something is stuck in the headphone jack. Try to vacuum it out or CAREFULLY use a straightened paperclip to remove any dust or lint. You can also try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.

No speaker sound from pavillion g7-1033cl but the head phone plug works fine.

tried all settings and looked for updated drivers to no avail. Any ideas?

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53848.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio through the notebook speakers.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Very low sounds from iPad mini

Is anyone concerned about the lack of volume on the iPad Mini?

Use powered Bluetooth speakers e.g. Bose Soundlink
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/59362afb82a5620f08d 2bda9073fedb3.jpg

Only "Headphones" sound, no speaker sound after 4.2.1 upgrading

After I had finished upgrading 4.2.1 firmware for my iPad, the speaker's sound has gone.
I can hear the sound from my iPad only when I connected to any headphones or bluetooth devices.
I tried many methods to get the sound back, starting from:
1. trying to plug in and out my headphone - nothing changed
2. switch on and off from the mute button (former is lock button) but it only showed "Headphones" or "Mute" sign.
3. shut down and turn on my iPad - nothing changed
4. Hard Reset my iPad and Restore - Still no sound, but I had to re-install everything again
5. Ask everyone and search every "no sound from iPad" topics but found none like mine.
However, while I upgraded the firmware, I noticed that I "locked" the screen during the process and I heard someone in the internet told me that it might be the origin of my problem.
I tried to sync my iPad and find how to re-upgrading the firmware again with no "locked" the button but there is no way to.

I've been having this problem for several months and just found this thread. Unfortunately the solution isn't well spelled out, but I was able to resolve the issue.
To recap:
Problem: Many/most non-Apple Apps have no sound from the iPad internal speaker. Plugging headphones in provides sound from all apps. Apple Apps (youtube, music, video, safari, etc) continue to function and play sound out of internal speakers normally.
Resolution: This issue appears to be related to the 'mute' / screen orientation lock button. If your iPad mute switch was on mute when you switched it to orientation lock, 3rd party apps will remain muted via internal speakers no matter what you do. Luckily an easy fix: Go Settings -> General and switch from 'lock rotation' to mute. Slide the switch to the non-muted position. You can now switch back to 'lock rotation' and your apps will play sound from the internal speaker again!!!

I can't hear sounds from my ipad speaker

I just bought Ipad mini last 2 weeks....since I have bought ...I can not hear sounds from speaker.
It always shows "headphone" mode....Why?
Technician tried to restore but not work....What is your suggestion?
Thank you.

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

For best sound quality should volume be controlled from iPad or BlueTooth speaker?

For best sound quality when listening to music, should the volume be controlled from iPad or from a connected Bluetooth speaker?

Pajaro wrote:
For good sound quality, flat response is the most important thing. Take a look at qloud, http://aur.archlinux.org/packages.php?ID=34412, and find yourself a very good microphone.
Then you will probably want to set a global equalizer for your machine. You can try with alsa, http://krustev.net/w/articles/Global_eq … _for_ALSA/.
If ALSA isn't finegrained enough, jack has a lot more flexibility, except for the fact that it doesn't allow you to set default output device, so you will need a helper application to redirect all output connections to your equalizer.
Well, i would say this is quite subjective. Untouched signal is superior to any equalized sound in my opinion, but i know this debate is never satisfying

Ipad 2 has no sound from built-in speaker after one day.

I received by ipad 2 yesterday and I had sound out from the built-in speaker when using facetime and
youtube.
When I turned on my ipad2 today, there are no sound from the built-in speaker. I checked the switch in
"settings" and it is set to "lock rotation" instead of "mute". So I am pretty sure my ipad2 is not
muted in the first place, using the volume locker and the volume icon shows "headphones" but
I do not have the headphones plugged in. However I got sound when I plugged in the headphones,
unplugged them and I got no sound from the built-in speakers again.
I have a 32G wifi+3G (The 3G is not enable yet) and the latest verion of iOS
Kim

Hi,
You can reset your iPad by pressing and holding the On/Off/Wake/Sleep button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If it doesn't work, you can restore your iPad using iTunes by connecting it to your computer.

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

No sound through iPad speaker

I don't seem to get any sound from my iPad speaker when playing a game. I do however get sound when I'm watching a video on youtube.

Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

No speaker sound from iPad

Similar Messages

Maybe you are looking for