No speaker sound. Headphones work, but not speakers.

This problem is driving me crazy.  I simply cannot get speaker sound.  I've even used recovery discs to return to original factory condition.  My computer is six months old, HP Pavilion dv6 3163cl.
Please help!!
swr0808
ragstoriches

Do you get sound from the speakers in any apps e.g. Music and Videos but not games/notifications ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

  • Sound card works but not when rebooting

    i followed all the steps...
    alsaconf
    alsamixer
    /etc...noise.wav
    alsactl store
    edited the rc.conf
    sound works but when i reboot, before the root i get the error... sound card not found?

    check in rc.conf and see if your sound module isn't listed. Odd that it doesn't find your sound card on boot.
    U may also need to run alsactl store as root. Permission problem, possibly?
    sounds like alsaconfig is finding and loading the module each time u reboot, but its not being loaded because I think u need to run alsactl store as root, since it needs to be loaded by the kernel. That would require root privileges I would think. That's my best guess.
    Last edited by jacko (2008-01-10 22:38:10)

  • My sound is working but not my

    ok i just bought a new soundblaster Li've! 24-bit and i got the sound working but my microphone doesnt work... what the hak? im 50% positi've that its in the right jack, and i also disabled onboard sound on my BIOS and in my creative surround mixer application, under the REC section i changed to microphone and i made sure the "Do not monitor" has not been enabled. can you pleaseeee help me? thnx.., o yea more question, the soundblaster Li've! 24-bit uses creative labs EAX regular? not creative labs EAX 2 or 3. thx please answer
    -Hyun

    Welcome to the forums.
    If you have a video that is muxed it is possible in converting it that one or the other tracks (audio or video) will get left behind. You will need to demux it first and then convert it to MPEG4 if this is the case:
    http://docs.info.apple.com/article.html?artnum=61608
    Now, this assumes the video was MPEG1 or MPEG2 in the first place. If it started life as an MPEG4 it ought to convert properly -- check it out in iTunes (Ctrl-I) and see what the resolution and maxbit rate are to make sure they don't exceed the iPhone specs. If within the specs you can always try resetting your phone (it never hurts and sometimes helps).

  • HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

    HP Pavilion 15-p027ne:
    Audio working through headphones/earphones but not through speakers.
    I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved. 
    Appreciate any troubleshooting tips.
    Thanks.
    - HP Pavilion User.

    Hi there @donimuha 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
    As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
    No Sound from the Speakers (Windows 7)
    Let me know if that works for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • Ipad 3 speaker no sound, headphones work fine

    iPad 3rd Gen with iOS 7.1  speaker sound stopped working today. The headphone socket works fine as does the sound on Apple TV. Just the iPad speakers not working (music, notifications etc all silent).

    1. If you have no sound at all, even in the Music App, try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    2. Reset all settings. Settings>General>Reset>Reset all settings. No data will be lost but you will have to enter all of the device settings again.
    3. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    4. If you still have no sound, try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

  • Sound Headphones work in commandline test, not with programs

    So I have a strange question. I've seen a bunch of posts about headphones and speakers playing together, but i have a different issue. My speakers work, and I can't get headphones to work. so I did as the wiki said and installed asoundconf and everything. But youtube will still play out of speakers. I use the aplay ~ thing from the wiki and it plays out of my headphones. So the headphones work, but why is it that they don't play sound normally? Alsamixer can mute the speakers, but it doesn't switch to headphones. If my problem were both would work, all the posts about simultaneous headphone/speakers would help. Sadly, my issue is different (though i imagine, easier to solve).

    lol. i was saying that in the wiki, it says to use aplay /usr/share/sounds/alsa/Front_Center.wav and it will play that sound. That sound plays through my headphones, which means that they work. My question would be if they work, why doesn't anything else use the headphones, they aren't muted or anything?

  • IPad3 Speaker isn't working but the headphone is working fine.

    iPad3 Speaker isn't working but the headphone is working fine. I have resetted the all settings and restore to old backup also but it doesn't work.
    Let me know the steps to resolve the issue!

    Check System Preferences > Network > active connection > Proxies tab. Are there proxy servers enabled? If you aren't behind a proxy server (which you probably aren't), uncheck those boxes. (Firefox bypasses the OS's proxy settings, so it's not affected by those settings.)
    Hope this helps...

  • I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.

    I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.
    Now it is not working even with fliping, is the problem with hardware or software?
    Is any soloution to solve the problem?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

    My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • My new iPhone 4S has hearing problem.speaker and headphone works very good.However using handset to make and receive calls I cannot hear anything?I did restore the phone and removed the plastic.Is there any solution to this problem please?

    I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?

    I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
    Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
    Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
    But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
    Have you tried a bluetooth headset yet?

  • TS3274 Getting sound for music, but not for game apps.  Checked settings and sound is on.  Any suggestions.

    My volume controls work and getting sound for music but not for game apps.  I did check settings and sound is turned on under notifications and in the app.  Any help would be appreciated

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

    Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

    Review my post here:
    http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
    And see if something similar will work for you.

Maybe you are looking for

  • Nested Composite Component Doesn't work for table column

    I have reported this issue as defect 1541 but I'm hoping someone my have a suggestion on a work around for this. Here is the issue I am attempting to use composites to represent a table column. I have tried this with both IceFaces and the standard im

  • Insertion of a field along with dropdown box in a view of IC Webclient crm4

    I have  got a error when doing a customization in ic webclient My  intention is to add a field along with a drop down box associated with it i am doing it in crm 4.0 i created a customize bsp application and added profile to the custom icwebclient fr

  • Camera Raw. CS 4, 11.0.2, Mac OS 10.5.8

    Upgrading using the automatic upgrade for Acrobat to 9.4 killed my system and computer (that was from the tech person and Apple working together on trying to find out what happened to my computer). Anyway, I had to completely rebuild and reinstall ev

  • [Solved] Package Preparation Failed

    Alright, the issue I'm having is that when I select packages during the installation I get an error, "pacman preparation failed check /dev/tty7 for errors". At first I thought it was a network problem; but, I can ping www.google.com and everything el

  • Online Database Backup Error

    Hi, While trying to take the Online database backup , i get the following error BR0278E Command output of 'LANG=C cd /oracle/CPD/sapdata1/sr3_1 && echo sr3.data1 | LANG=C cpio -ovB > /dev/rmt0.1': <sr3.data1> ? BR0280I BRBACKUP time stamp: 2007-09-14