No specification is assigned to the material in the BOM item

hello
when I want to create or modify certains BOM (cs02), i have this error message.
It is a warning, but nothing is done in the BOM.
Where does this error come from ?
And how to solve it ?
Thans

see below the error message :
Item material 421Z2811-2001 is not assigned to a specification
    Message no. CM_BOMBOS052
Diagnosis
    No specification is assigned to the material in the BOM item
    00125813-0240.
System Response
    The system cannot create a composition for the bill of material since
    there is no material-specification assignment.
Procedure
    Ensure that the items in the bill of material are assigned to one
    specification in each case before the composition is generated.
    Otherwise errors occur during generation and you have to repeat the
    process.
I Don't know, what is a spécification in a BOM ? Never we have used a "spécification"
@+

Similar Messages

  • When am creating the material using the transaction MM01 getting the error

    Hi all,
      Could you please help me to solve this issue, When I am creating the material using the transaction MM01, am receiving the error message "Express document "Update was terminated" received from author "XXXXXXXX", I checked the in SM13 found error message showing in Z_LGPLA_BIN_POSTING.
    Regards,
    Muralikrsihna.

    ST22 Error is : SAPSQL_ARRAY_INSERT_DUPREC, below is full error message
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "Z_LGPLA_BIN_POSTING" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    Regards,
    Muralikrishna

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

  • Maintain pricing conditions for the material for the excise invoice date

    When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
    I request if any one can provide me the solution

    Hi,
    Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
    SPRO -
    > Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
    Regards,
    Biju K

  • Extend the material for the storage location in mass.

    Hi,
    Can any genius let me know how can I extend the material for the storage location in mass.
    Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
    Is there any other way apart LSMW for MMSC.
    Regards,
    Shyamal.

    hi
    did u tried mass
    try this
    go to MASS
    then select BUS1001
    go to plant data for material  execute
    click on data records to be creatd
    then add material in field
    then select  select field button and add storage for extrenal procurement then there u will find on filed for external proc
    now do mass change
    reward if helpful
    regards
    kunal

  • How to set up the inspection plan for the material in super BOM

    Hello,
    how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
    I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
    Thanks!
    Lin

    Hello,
    I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
    then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
    Regards, Winnie

  • Is Apple planning on changing the material of the plastic?

    If anyone can answer this i've been wanting an ipod nano for the past month but after hearing about the scratching problems... I dont know wat to do. Duz anyone know if Apple is gonna change the material on the nano to fix this scratching problem?

    Erik,
    Anyone that knows for sure is cenrtainly under a Non-Disclosure Agreement with Apple and can't say. Any other opinion is just a guess, so you'll never know the answer, unless Apple makes some sort of statement.
    Nikki

  • Reg. Usage of finding Highest Material based on BOM items/Components

    Dear Experts,
    My requirement is that i need to explore the highest level of material based on BOM item / components as input criteria.
    I am using FM 'CS_WHERE_USED_MAT' to get the header BOM based on BOM item. But i need to get the header BOM based on BOM item as input criteria and check whether the Material Type of Header BOM is 'FERT' (Finished goods). Else, i need to get the next highest level of BOM based on Header BOM got in the previous step and check whether Header BOM is 'FERT'. Else, i need to continue to explore the next highest level of BOM. Kindly let me know the logic i need to use or any FM / BAPI available provided by SAP. Kindly help me in the above regard.
    Regards,
    Ramesh Manoharan
    Edited by: ramesh.manoharan on Jan 18, 2010 6:55 AM

    closing the thread

  • How to get the latest and valid BOM item entry from STPO

    hi,
    may i know with what condition we can get the latest and valid BOM item entry from STPO table?
    i have STLNR and IDNRK as a input. But i realized that it would return multiple entry due to the combination of  valid-from and valid till date.
    can i use stlnr,idnrk and stpoz (with the latet counter) to get the latest and valid BOM entry?
    thank you.

    Hi
    You can get the latest BOM either by using the latest valid from date DATUV or latest internal counter STPOZ
    Regards
    Shiva

  • How to extend the material in the material master?

    hi all gurus
    i have to change and add the MRP tabs in the existing material which is not availble in the material. so, how can i add it in the master data.
    thnx in advance.
    rgrds,
    rajesh

    Hi
    U can do with MM01 to extend the matl master to another plant ...
    If u specific to MRP tabs n the fields... If u r using MRP profile to similar matl master then u can put that while extending, then the all fileds n values will be updated.
    Regards
    Ram

  • Changing the Material at the time of PO Creation

    Hi All,
    We have a scenario where user enter the Material-01 in ME21N and while posting the document ,we have to replace the material with Material-02.
    We tried to do so in BADI ME_PROCESS_PO_CUST method PROCESS_ITEM.
    But it is not displaying/changing.
    In the Badi while making the changes and Set_data  ..we are not getting any error...but it is not showing on the screen and data base.
    Please suggest.
    Thanks
    RK

    Hi Rahul,
    try with This Badi  ME_PROCESS_PO , Method Open or Process item,
    Implemente it and use a break-point to test it i.e it is triggred or nt , before processing it.
    Regards,
    Abhisek

  • The system does not get Storage Location of the material from the Contract

    Hi to all,
    We are encountering a problem now regarding the PR to PO conversion.  Our ABAPer has made a background job for the User to convert a PR to PO using ME59N. 
    Background Job : ZPTI_MM_PR_PO_CON
    Program : RM06BB30
    Tcode: ME59N
    Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
    Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
    Problem:  When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
    Steps done :
    1. Create a Contract (ME31K)
        1.1 Specify the SLOC of the material
    2. Create PR (ME51N) and enter the Contract Number inside the PR
        note : In the PR the material has a Storage Location which defaults from the Material Master.
    3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
    4.  Set the job to "Immediately"
    5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
    6. Save
    7. Go to SM37 and check the job if finished.
    8. When the job is finished, check the PR if it has a PO.
    9. Display the PO.
    10. Check if the storage location in PO has gotten from the Contract
         The problem now appeared.
    We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
    Please help what should be checked on our side.  Our ABaper is also currently debugging the program but we
    are seeking help to fasten the solution.
    Best Regards,
    Elynne

    Hi Elynne,
    Definitively, it is a problem with ME59N background process.
    It is better if you can create a message to SAP asking for the solution.
    I only found the next SAP note:
    Note 1287723 - ME59N in backgound does not populate PR details in PO.
    But, I do not know if it will help to resolve your issue.
    I hope this little information can help you in anyway.
    Kind regards,
    Sandra

  • From which table field could we find the 'material type' of delivery items.

    Hi,
    Please kindly advise from which table field could we find the 'material type' for one delivery items??
    Thank you.

    Hi,
    You cant get the material type directly from delivery item. Pls make a joint between LIPS and MARA tables to get the same.
    In LIPS, get the material numbers of the delivery document.
    Give them in MARA to get their material types

  • Is sony correcting the issues with the PS4 controllers. The material for the analog sticks need to be changed.

    I would like to get a ps4 but both my friends ps4 controllers analog sticks are tearing. I have used both the ps4 controller and xbox1 controller, I like both but prefer the lighter feel of the xbox1 analog sticks they are more comfortable and durable. I dont want to buy a xbox1 but if sony does not correct this issue it will sway my decision. I really like the additonal power the ps4 offers but the controller is a major concern. When microsoft came out with the 360 it had reliability issues, microsoft instead of fixing the problem had consumers send there 360's in for repair. They would not admit they made a mistake with the design of the system and the so called repair was temporary for may consumers as it would just overheat again and you would experience the same red ring of death. My 360 broke 3 times which made me lose all faith in microsoft as a company. The decieved consumers instead of correcting the issue. I hope Sony learns from their mistakes. Dont send consumers the same flawed controllers, admit there was a production mistake and fix it!!! If you guys change the material and correct the issue please email me, if it is corrected I will be a playstation owner if not I guess I will have to go with microsoft. I would also love to see analog sticks with less resistance, closer to the xbox1 sticks.
    Thanks for listening hope you take these comments into consideration.

    Please share your suggestion on  Sony PlayStation Community here. I'm sure they'd appreciate it. Thank you! 
    If my post answers your question, please mark it as "Accept as Solution".

  • How to get the tax data for the material in the Sales:sales org.1 view 1?

    as the title,many thanks!

    Hi,
    the TAX details are stored in table  TSKM  ---> Material Taxes
    You can find field TAKLV  --->  Tax classification of the material in MARA table .
    You need to link MARA-TAKLV  and TSKM-TAXKM field .
    Best regards,
    raam

Maybe you are looking for