No Start Page Error

No Start Page
Could not display this Web Site as no Start Page has been configured. To configure a default starting page, set one of your Web Pages to be the Start Page. Please contact your Administrator for more information."
Not sure why this is happening. dallaseasterrun.com

Hi Paul,
It appears you've managed to address this issue - I'm not encountering a "No Start Page" error when navigating to your site.
Cheers.

Similar Messages

SAP J2EE Engine Start Page / Error 404

Hi there,
i have a problem.
I restartet my JAVA ONLY System (a Portal)
The System comes up. All Log files are clean. No Error no warnings etc.
When i now want to connect to the ""SAP J2EE Engine Start Page"
via: http://host.name.com:50000/index.html
The following error occurs:
404 Not Found
SAP J2EE Engine/7.00
The requested resource does not exist.
Details: Go to main page of this application!
as i say.. The engine comes up normal.
ALL really all other applications are running.
When o go to:http://host.name.com:50000/nwa or /useradmin or any other link.
All works great. Only the Startpage cannot be displayed.
So did anyone have a clue why this don`t work?
Regards
Bjoern

The index.html was deleted.. i copied it over from our other Testportal.
it was in:
/usr/sap/SID/JC00/j2ee/cluster/server0/apps/sap.com
anywhere here ... i forgot the exactly Path.
eventuelly you can find the path with httptrace or so?
Regards
Bjoern

Obiee start page error : Error 500 internal server error---- From RFC 2068

Hi,
Atlast after 100s of attempts(it took around 2 months) I successfully installed Obiee 11g on my laptop (simple install type)
(lot of errors and lot of issues).
Now the problem is whenever I start the BI services "http://systemname:7001/analytics/saw.dll?bieehome"
it won't open some time especially when system is not connected to internet... and whenever I connect to internet it works properly..
( I installed Microsoft Loopback Adapter for static IP)....
The error I am getting when I am not connect to internet is " Error 500 internal server error---- From RFC 2068 Hypertext Transfer Protocol-- HTTP/1.1:
10/5/500 Internal Server Error
The server encounterd an unexpected condition whcih prevented it from fulfilling the request"
Does Obiee 11g definitely need internet connection(for standalone systems) to work properly..?
Thanks and Regards,
Sri..

it works some time ......

"Exception Processing Message" error when clicking the Accessing Server Data link on the start page

When I first started the application, I click the Accessing Server Data link on the start page. I immediately got the error "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c in a dialog box titled "Windows - No Disk". I had to used Task Manager to remove the box after closing Flash Builder 4. I then tried the video tutorial on "PHP Services in Flash Builder 4". I keep receiving an error during service introspection trying to connect to the PHP class. It was the same error as the other individual "Cannot Connect to PHP Service". So I tried another tutorial and generated a sample PHP class. I moved a datagrid on to the stage, droped in the getAllItems function, and configured the return type. However, when I ran the app, I received the same error "Exception Processing Message" again. I have attached the screenshot of the error in addition to my phpinfo and log files.

"The exception process message" is definitely a issue. Is it happening consistently, if so can you file a bug at bugs.adobe.com/flex and give out your machine config details, and the error log.
With regards to generating a new php file and the introspection error that you are getting, looking at the logs it probably is two fold.
First off the name of the file and the class name should be the same, are you having employeeServices as the name of the class in employeeServices.php file.
Second, It seems prior to generating this new file, you had a syntax error at line 5.
It would be easier to figure out what the error is, if you can also attach the php file, by removing any sensitive information in that.
Hope this helps.
Thanks
-Sunil

Firefox4 cleared compnents.classes(cid) error, but Start page still does not load? just shows search bar that doesn't operate /load?

Loaded Firefox 4, received error message components.classes(cid), now corrected through help pages. But Firefox Start Page only shows a Search bar, that doesn't operate, page does not carry any other information, presume it's not downloading correctly, any ideas??

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
See:
* [[Troubleshooting extensions and themes]]

Applications Start Page Profile Option Causing Issues

Hello Oracle Gurus,
I'm having an issue in a 12.1.3 instance that I think may be related to the "Applications Start Page" profile option.
For testing purposes, we set the profile to a specific Self-Service page at the Site level. We eventually removed the Site level profile and added it at the user level just for specific users, but since the Site-level profile was set, every time we click the Home link in the upper right-hand navigation, we get an "unexpected error." If we attempt to log in as a user that does not have the Applications Start Page profile defined, we also get an unexpected error.
After getting the error using either of the methods listed above, if we then try to navigate back to the login page, the instance throws a 500 Internal Error.
If we close the browser and navigate to the instance again, we're able to log in without any issues with user accounts that have an Applications Start Page profile defined.
Our "Self Service Personal Framework Mode" is set to "Framework Only" at the site level.
Bouncing Apache seems to resolve the issue temporarily, but then it comes back again a few hours later...
We've opened a Service Request, but has anyone else run into this before / have any ideas on how to fix it?
Here are some related Metalink notes from 11.5.10:
729375.1 (About the Applications Start Page profile option)
331814.1 (Error on Personal Home Page when returning to 'Home' link)
Thanks!
Anne

The issue is not specific to a responsibility or application.
Here is the error:
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for Linux: Version 11.1.0.7.0 - Production
     Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
     TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 27-JAN-2011 09:46:02
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.30.31.107)(PORT=1502))
Thu Jan 27 09:53:30 2011
Incremental checkpoint up to RBA [0x42.e3635.0], current log tail at RBA [0x42.e37e1.0]
Thu Jan 27 10:13:31 2011
Incremental checkpoint up to RBA [0x42.e602b.0], current log tail at RBA [0x42.e6146.0]
Thu Jan 27 10:33:33 2011
Incremental checkpoint up to RBA [0x42.e7bc9.0], current log tail at RBA [0x42.e7d51.0]
Thu Jan 27 10:53:35 2011
Incremental checkpoint up to RBA [0x42.e995f.0], current log tail at RBA [0x42.e9ac9.0]
Thu Jan 27 11:13:37 2011
Incremental checkpoint up to RBA [0x42.ec163.0], current log tail at RBA [0x42.ec3f7.0]
Thu Jan 27 11:23:48 2011
Starting background process CJQ0
Thu Jan 27 11:23:48 2011
CJQ0 started with pid=8, OS id=17239
Thu Jan 27 11:33:39 2011
Incremental checkpoint up to RBA [0x42.ee08f.0], current log tail at RBA [0x42.ee216.0]
Thu Jan 27 11:53:41 2011
Incremental checkpoint up to RBA [0x42.efd07.0], current log tail at RBA [0x42.eff13.0]
Thu Jan 27 11:54:02 2011
Stopping background process CJQ0
Thu Jan 27 12:13:43 2011
Incremental checkpoint up to RBA [0x42.f25c0.0], current log tail at RBA [0x42.f2e4b.0]
Thu Jan 27 12:33:45 2011
Incremental checkpoint up to RBA [0x42.f4cae.0], current log tail at RBA [0x42.f4e4b.0]
Thu Jan 27 12:53:47 2011
Incremental checkpoint up to RBA [0x42.f6e8a.0], current log tail at RBA [0x42.f6fb7.0]
Thu Jan 27 13:13:50 2011
Incremental checkpoint up to RBA [0x42.fa3d0.0], current log tail at RBA [0x42.fa845.0]
Thu Jan 27 13:33:52 2011
Incremental checkpoint up to RBA [0x42.fc7d9.0], current log tail at RBA [0x42.fc989.0]
Thu Jan 27 13:53:55 2011
Incremental checkpoint up to RBA [0x42.fed4e.0], current log tail at RBA [0x42.ff12e.0]

Oracle BAM First page error

Hi All,
I have installed Oracle BAM 10.1.3.0 with Oracle DB 10.2.0.2.0 on widows 200 server SP2 machine. The BAm services are starting properly, but I'm getting the following error in the first page:
An Error Ocured while processing your request:
Exception Message: ADC Server exception in GetUserGroups():2.
Stack Trace : .....
Debugging Information: ....
Assembly: Start Page
State: Oracle.BAM.StartPage.Startup
Event: Initialize
Can anybody please help me out...
Thanks a lot in advance.
Varun R

hello Varun/ Coert
I guess -it- is not advisible to directly modify or alter any bam tables, it may land you into unrecoverable errors. Alternnate is to use the MakeBAMAdmin SQL utility on the OTN pages. Coert- can you try using http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html
ADCAdminUtility

JS CS3 Simple Dialog to change doc starting page.

This example presents the user a dialog telling them the what their current document starting page is. The user can then change the value and update the starting page number. For some reason I'm getting a error Cannot handle the request because a modal dialog or alert is active. I have set myDialog.close(); before the if statement so should this not stop this error?
I have not added any checks to ensure a doc is open in ID yet.
var myDialog = new Window('dialog', ' Starting Pg No');
    myDialog.dPgNo = myDialog.add('panel',undefined,'File details');
    myDialog.dPgNo.alignChildren = 'left';
    myDialog.dPgNo.myPgNo = myDialog.dPgNo.add('group');
    myDialog.dPgNo.myPgNo.group = myDialog.dPgNo.myPgNo.add('group');
    myDialog.dPgNo.btnGroup = myDialog.dPgNo.add('group');
    with (myDialog.dPgNo){
    myPgNo.group.orientation = 'column';
    myPgNo.group.alignChildren = 'right';
    myPgNo.group.preferredSize = [90,15];
    myPgNo.group.st = myPgNo.group.add('statictext',undefined,'Your Doc starting page is:');
    myPgNo.et = myPgNo.add('edittext', undefined, app.activeDocument.pages[0].name)
    btnGroup.btn = btnGroup.add('button', undefined, 'Update');
    btnGroup.alignment = 'right';
myDialog.dPgNo.btnGroup.btn.onClick = function() {
myDialog.close();
var myPagestart = myDialog.dPgNo.myPgNo.et.text;
if (app.activeDocument.pages[0].name != myPagestart){
app.activeDocument.pages[0].appliedSection.continueNumbering = false; //<-----------ESTK stops here with the error mentioned before.
app.activeDocument.pages[0].appliedSection.pageNumberStart = parseInt(myPagestart);
app.activeDocument.pages[0].appliedSection.sectionPrefix = "";
alert("Your document start page has been changed to "+myPagestart+".");
myDialog.show();
myDialog.show();

Hi John,
You don't need to close and reopen the window. Instead of dialog use 'palette' type of the window and run the script in a persistent engine, e.g. #targetengine "session".
Kasyan
#targetengine "session"
var myDialog = new Window('palette','Starting Pg No');
    myDialog.dPgNo = myDialog.add('panel',undefined,'File details');
    myDialog.dPgNo.alignChildren = 'left';
    myDialog.dPgNo.myPgNo = myDialog.dPgNo.add('group');
    myDialog.dPgNo.myPgNo.myGroup = myDialog.dPgNo.myPgNo.add('group');
    myDialog.dPgNo.btnGroup = myDialog.dPgNo.add('group');
    with (myDialog.dPgNo){
        myPgNo.myGroup.orientation = 'column';
        myPgNo.myGroup.alignChildren = 'right';
        myPgNo.myGroup.preferredSize = [90,15];
        myPgNo.myGroup.st = myPgNo.myGroup.add('statictext',undefined,'Your Doc starting page is:');
        myPgNo.et = myPgNo.add('edittext', undefined, app.activeDocument.pages[0].name)
        btnGroup.btn = btnGroup.add('button', undefined, 'Update');
        btnGroup.alignment = 'right';
myDialog.show();
myDialog.dPgNo.btnGroup.btn.onClick = function() {
    var myPagestart = myDialog.dPgNo.myPgNo.et.text;
    if (app.activeDocument.pages[0].name != myPagestart){
        app.activeDocument.pages[0].appliedSection.continueNumbering = false;
        app.activeDocument.pages[0].appliedSection.pageNumberStart = parseInt(myPagestart);
        app.activeDocument.pages[0].appliedSection.sectionPrefix = "";
        alert("Your document start page has been changed to "+myPagestart+".");

J2EE Engine startup page error: File [main.jsp] not found in application..

Hi Guys,
I have just uninstalled and reinstalled SAP Netweaver 7.01 portal. The uninstall was clean and the reinstall also went without any errors.
However, immediately after this, when I open http://<host>:<port> I get the following error:
404 Not Found
The requested resource /main.jsp is not available
Details: File main.jsp not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
If, instead, I open portal (http://<host>:<port>/irj), it works fine.
Anybody has any idea why this has happened and how can I resolve this issue?
Thanks,
Shitij
Edited by: Shitij Bagga on May 5, 2010 9:36 AM
Edited by: Shitij Bagga on May 5, 2010 9:37 AM

Hi Anil,
I don't see how this note is relevant here. It is just the j2ee engine start page which is not opening. If I go straight to the systeminfo page or the portal login page, they are all working.
Any experience on this issue with that note u suggested? Please share.
Thanks,
Shitij

Safari "Failed to open page" errors

What would cause Safari to suddenly start getting "Failed to open page" errors from I web-site I was successfully browsing 2 minutes ago?
I was browsing REI.com; viewed several different pages, then tried to go to a different REi.com page and all of a sudden Safari won't load the page. and reports a "Failed to Open Page" error, with the excuse "the server where this page is located isn't responding"??
I thought maybe my internet connection had failed, but I tried some other sites cnn.com, apple.com and everything is just fine.
Then i went to a different computer on the same network and tried rei.com from Firefox and its just fine.
Any ideas or suggestions?

If your Safari won't open, one or more of the following procedures should fix it:
1. Go to Home/Library/Safari/ folder and remove the following two files:
¥ history.plist
¥ lastsession.plist
(Safari may not load properly If these two files are corrupted.)
2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
(These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
(Again, faults in stored cookies may interfere with Safari's launch.)
4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
Also look in Library/Input Managers where other third party add-ons may lurk. If you find a SIMBL folder, please note that some SIMBLE.bundles may require updating or possibly removal.
Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.

Mail start page won't load correctly

When I try to add CNN as my start page, it will not load correctly. I tried to change to fox news and it has an issue with the "System Error: Domain name mismatch". Other sights will not load properly as well.
I have used Mozilla for many years and never had this problem. It just started one day. I have not changed anything on my system.
Thank you for your help.
P. Walker

hello KatyG, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Unable to access E-Recruiting Start Pages Externally

Hello,
Im hoping for some assistance with an E-Recruiting issue (standalone system; Version 3.0). We are currently only able to access the start pages while inside of our network, and receive a page cannot be displayed message while outside of our network. This is with the exception of the candidate registration page. We can successfully register, and then pass on to the main E-Recruiting start page for an external candidate.
The hrrcf_start_int bsp/service is used to call the start page for registered internal candidates, recruiters, and administrators (different view for each). The hrrcf_start_ext bsp/service is used to call the start page for registered external candidates. And, the hrrcf_cand_reg bsp/service is used to access the external candidate registration page.
The URLs for the start pages were created using program RCF_GENERATE_URLS.   We are requiring all traffic be routed through our WebDispatcher, and all traffic be HTTPS, so the URLs start out with https://recruiting.... Our E-Recruiting system is actually careers, but again, we want all traffic to go through our WebDispatcher, which is recruiting.
We have created external aliases in transaction SICF for all three URLs, and using the alias, I can successfully login to all pages within our network.   When I test the external aliases within SICF, I get an internal error (The user is not assigned a candidate or an employee) for the hrrcf_start_int and hrrcf_start_ext services. When I test the external alias for hrrcf_cand_reg, it is successful.
When I test the hrrcf_start_int service within SICF, I get the logon page, but after logging on, I get message Name of logical port&&lp_named is invalid. When I test the hrrcf_cand_reg service, it is successful.
When I test the hrrcf_start_int and hrrcf_start_ext BSPs in SE80, I receive an Internet Explorer cannot display page message.   The same is true for the hrrcf_cand_reg. However, it is trying to access http://recruiting instead of https://recruiting. I can see that URL address in the application.do Controller, but have no idea where to change it, because it is greyed out (any help with this would be appreciated as well.)
We have created internal users using program RCF_CREATE_USER, and when I look at transaction BP, I see that it is creating a business partner for each user.
We have had SAP tell us that it is not a WebDispatcher issue, and we have also confirmed that it is not a firewall issue.
It seems interesting to me that we can only get to the one page that does not first require authentication. If anyone has any information that would be helpful, I would appreciate your time.
Sorry for such a long message, but I was just trying to be as clear as possible.
Thank you,
Leeanna Travis

Hello Leeanna,
quite a lot of topics and doing remote analysis for netwok issues is difficult.
Some ideas:
- starting hrrcf_start_ext / hrrcf_start_int via SICF or SE80 will never be successful as these applications need parameters. The message you got when testing startpage from SICF is classical for invalid startpage Id
- if you do not reach pages from outside, check network traffic / access rights in firewalls. Usually the sap server name cannot be resolved through a dns for an outside call as you companies dns is not visible for internet users. You will need a relay.
- check that full qualified server name is set on the server
- check eeb infrastructure that it allows the access protocoll. If ICF service says http but firewall only allows https you won't get a responde. Sometime switching protocolls within the request produces problems.
- WebDispacher is known for eating parameters / url parts. Try to get your hands on the traces of the requests which really reach the server.
- if possible supply some more information on release & support package level. E.g. there is a support package which has an error that if you activate 'do not show https warning' in an icf service it does not only hide the warning but the whole logon screen :o(
Hope that helps, if not just reply - perhaps w/ focus on one special point.
Best Regards
Roman Weise

APEX 2.2 starting page.

Hi All,
I install oracle application express on linux es4 with out any issues.
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
my opmn status is
[oracle@abc bin]$ ./opmnctl status
Processes in Instance: standalone
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 30188 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
my http://localhost:7777/ is working fine. but my starting page for apex is show error message.
url : http://localhost:7777/pls/apex
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at abc Port 7777
where to check the errors. Please help me

I found the problem. According to installation doc we need add an "include" entry of dads.conf in httpd.conf. Once I removed that entry ever thing is working fine. I don't know the document is wrong or some thing else?
Another questions.
1. Can any one guid me where to start the development.
2. How to change the default admin passwords including schemas.
3. After installing HTTP server and AE my EM is not starting any help is appreciated.
Thanks,

Business Role, Technical Profile, Application, Start Page in UI for service

Hi CRM 2007 gurus,
I have made all the settings in accordance with C04 to use the UI for the services role (copy of business role SERVICEPRO). Created the relevant PFCG role and a position in the org model; with a user and the business role assigned to the position. But I am getting an empty page on login.
Then I changed the technical profile from DEFAULT to DEFAULT_IC; then it started giving an error "Permission denied".
I then changed the start application to CRM_UI_FRAME and the start page to DEFAULT.HTM; then Internet Explorer started exiting on its own after the login.
Can someone pls tell me what is amiss. Do I need to include some specific application and page as the "Startup Application" and "Start Page" in the technical profile (these are currently blank for the technical profile DEFAULT attached to the concerned business role).
Points to be won; kindly help asap.
Regards,
DP

Hi Deepak,
few cents that might help:
- Your problem is definitely not related to authorization issues. (easily derived by the nature of the error message and the point where it occurs (CL_BSP_WD_STREAM_LOADER))
- The error message you received is being raised when CRM UI runtime tries to load a runtime repository. In case a runtime repository of a component has dynamic parts (e.g. the shell part itself), the repository is being loaded by the system via HTTP or HTTPS, depending on system settings. This results in the system sending a HTTP(S) request to itself.
Now, there are two likely reasons for this going wrong:
a) the system cannot "see" itself on the network (hosts problem, reverse proxy sceanrios, etc.)
b) the runtime repository doesn't exist at all (ressource doesn't exist). This sometimes happens if component enhancements are active in a client (customizing settings) but the respective enhancement component (development objects) haven't made it into the system.
c) In your case we can rule out this one: the SICF service for the UI component is not active - in that case the response would likely have been something like "Access forbidden" and you confirmed already all SICF services being active
To get more clarity, you might want to proceed as follows:
- Set a breakpoint in the line mentioned in the error message. You can access the source code of the releavant method using SE38 even though the include name looks pretty scary in the message (CL_BSP_WD_STREAM_LOADER=======CM02 or so).
- In the debugger, check the name of the URL that had been tried to access (The variable should be available some lines above the breakpoint where the request gets sent).
- try to access the same URL directly from your browser.
Now, if you still don't get a valid response, b) might be the case. If you get an XML file back, a) might be the case.
Good luck!
Peter

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

No Start Page Error

Similar Messages

Maybe you are looking for