No start-up display

When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
This question was solved.
View Solution.

HI @medi-g ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you power on the laptop you get a blank or black screen with no error messages.
Here is a link to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot to assist you to overcome this issue.
Good Luck and I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

CG02 Report from Template error when starting the display application

System info: SAP GUI 720 (patch 10007878), ECC 6.0, SAP_APPL/EA-APPL 605, WWI 2.7 (patch 20000084)
Hi, folks.
I was able to execute CG02 'Report from Template' function. My local MS Word 2003 would open successfully to display the report as expected. Suddenly, I couldn't do that anymore. I'm now getting msg "An error occurred when starting the display application" (C$772). And I didn't change anything.
Any clue to what has happened or why it is happening? In my Word, I have 'C:\Program Files\SAP\FrontEnd\SAPgui\wwi' set as the file location for User templates. What else should I check?
Thanks in advance.

Hi, Caroline.
Thanks for pointing me (back) to it! (I've encountered a similar issue with the same param back in 2010...)
I'm positive that the problem started after I tried to run the transaction code (of my custom report program that does the CG02 'Report from Template' function) from the web gui ('You Can Also' menu function). Somehow, the standard SAP fms within It changed the param ESWWI_INST value from 'EXISTFRONT' to 'WWISERVER'. So when I ran CG02 and the WWI server is not available yet, I received the error msg.

CG54--Report from Template error when starting the display application

Hi,
Currently I have MS 2013 installed on my workstatsion. But now whenever I try to open a template for any specification I get error "
An error occurred when starting the display application--Message no. C$772"
I have SAP Logon 730 Patch 11. Also in User profile I maintain EXISTFRONT for ESWWI_INST. But for some reason it keeps on getting reset as WWISERVER.
Need help on the same.
Regards,
Rohan

Dear Rohan
your local WWI installation seems to be dusrupted. Check e.g. EHS- Inconsistent WWI Report behaviour for different users
and many similar threads. Check OSS Marketplace for Release of WWI in regards of WinWord 2013
Dear Camila
according to my knowlede: the local WWI insztallaiton is not a "generation server" one. The parameter symbol you have mentioned is dedicated for WWI server set upin GLM area only. Therefore your hint will not work (according to my knowledge). But there is some "but"...
With SAP ERP EnhPack 3 you need not to install any more a local WWi but could use a WWI gen server farm. If you can use this option the WWI set up is very different. In this case may be your hint is correct.
C.B.

Right after starting up display goes blank and shuts down?

Right after starting up display goes blank and shuts down?
Any ideas I can't get it started. Thought I would ask for help before making a genius appt.

Thanks that was very helpful info. I was able to boot into the recovery disk partition and run some basic HD tests and it found no issues. Then I booted into the hardware test and it found no issues. After these tests it still failed to boot into Mavericks. I'm guessing its a software issue and I can not find the original computer disk. I have a time machine backup from 2 months ago and I could use the disk utility on the recovery sector to launch it but I want to wait and see if I can boot from a software DVD first. If I can repair the current OS that is my best option.
Thanks.

HT201442 my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started

my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started

It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help

Photoshop CS6 start screen displays circles

My Photoshop CS6 start screen displays circles around its rectangular shape. Can anyone tell me why?
I am using version 13.0.4 x64 on Macintosh OSX 10.9.2
Here is what the screen looks like:

I was a bit confused myself, because the splash screen with the circles was not something I recognized, but a quick look round revealed the screen above is for CS6 Standard. The alternative screen turns out to be for the Extended version, and since it is only the serial number that differentiates between Standard and Extended, both splash screens must be on your drive somewhere.
http://helpx.adobe.com/photoshop/kb/different-splash-screen-photoshop-cs6.html
This list only goes up to CS2, but is fascinating all the same. Hmmm... I suddenly feel like my geek factor shot up after typing the last sentence.
Photoshop Splash Screens | Photoshop News

Photoshop CS6 start screen displays circles around it

My Photoshop CS6 start screen displays circles around its rectangular shape. Has the program become corrupted? Should I reinstall it?

I am using Photoshop CS6 version 13.0.4 x64 on Macintosh OSX 10.9.2
Using Grab on the Mac, I haven't been successful in capturing screen shot.

'Failed to start Light Display Manager'

Introduction removed
I'm having some trouble with xorg, 'startx' refused to work (I have xorg-server obviously). I read symlinks and configs that are meant to be present in /etc and /usr, and I can't detect anything abnormal. I have the non-proprietary xf86-video-intel drivers installed, and I don't think any config is required on those.
And of course, the PC won't boot directly into the OS now, with the message:
[FAILED] Failed to start Light Display Manager.
See 'systemctl status lightdm.service' for details.
[OK] Reached target Graphical Interface.
I have no way of typing into the console, and therefore logging on, when this error is present.
Last edited by Paspie (2014-04-12 19:48:56)

https://wiki.archlinux.org/index.php/Sy … _boot_into
EDIT: you'd want to specify the multi-user target. If you need help adding this to your kernel line while booting up, this would depend on which boot loader you use. With grub legacy you'd hit 'e' on the menu screen to edit the kernel parameters. With syslinux it is tab ... I think. With the new grub, I'm not sure, it may still be 'e'.
Last edited by Trilby (2014-05-27 12:08:53)

The X-Server can not be started on display :0.. see /var/dt/Xerrors

The X-Server can not be started on display :0..
see /var/dt/Xerrors
I am trying to launch the CDE from the console and have tried the running the command : svcadm enable cde-login
but still get the same error. After some investigation i have found some advice regarding the font path and fonts.dir but its well confusing !!!
Can someone explain to me an easy way to display the cde?
I have looked in /var/dt/Xerrors and the output is:
Solaris ABI: 32-bit
SUNWxorg-server package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-server patches applied: 125720-20
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 125720-20
SUNWxorg-mesa package version: 6.8.2.5.10.0113,REV=0.2005.08.02
SUNWxorg-mesa patches applied: 125720-20 125724-01
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 3 15:00:55 2008
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (57 lines)
(EE) Failed to load module "dri" (module does not exist, 0)
(II) Module "ddc" already built-in
(II) Module "ramdac" already built-in
(II) Module "i2c" already built-in
(EE) AIGLX: DRI module not loaded
The XKEYBOARD keymap compiler (xkbcomp) reports:
Error: Mode_switch added to symbol map for multiple modifiers
Using Mod2, ignoring Mod3.
Warning: Symbol map for key <KPEQ> redefined
Using last definition for conflicting fieldsErrors from xkbcomp are not fatal to the X server
Fatal server error:
could not open default font 'fixed'
hes applied: 125720-20
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 125720-20
SUNWxorg-mesa package version: 6.8.2.5.10.0113,REV=0.2005.08.02
SUNWxorg-mesa patches applied: 125720-20 125724-01
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 3 14:21:13 2008
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (57 lines)
I have tried running kdmconfig and am worried about running a sysunconfig as this could unconfigure my server it Solaris 10 on x86!

I had the same problem when I upgraded to snv_114 from snv_98
on SPARC. The important line in /var/dt/Xerrors is this one:
could not open default font 'fixed'
The problem (in my case, anyway) was that the fonts.dir files were
not updated during the install/upgrade process. This fixed it:
$ su -
# cd /usr/X11/lib/X11/fonts
# for f in *; do cd $f; mkfontdir; cd -; done

My iPod Classic has started to display a folder with an explanation mark on it-no tunes! Is there an easy fix?

My iPod Classic has started to display a folder with an explanation mark on it-no tunes! Is there an easy fix?

Exclamation mark!

How to delay a long running tasks start until display is updated?

I am having a problem in that a progress bar I want to use to show progress of a long running background process is not showing up for a long time (up to 10 seconds) after the long running process is started. This is in an AIR application and the background process is an external native process, so once it is launched the UI thread is free to run, but the launch of the process can take time.
Below is the current state of the relevant code.
In addition to the current format I have also tried using the CREATION_COMPLETE, EXIT_FRAME and RENDER events with the same results.
If I up the value in setTimeout to 500ms the progress bar displays quickly, but I would prefer to not delay the launch of the background process for no reason.
If I comment out the loadPorject call the progress bar is displayed instantly.
Any help is appreciated.
private function continueLoad(evt:Event):void
     // We are about to start some potentially long running process
     CursorManager.setBusyCursor();
     curPopup = new SyncProgress();
     curPopup.addEventListener(Event.ENTER_FRAME, popupLoadedHandler);
     PopUpManager.addPopUp(curPopup, parentView, true);
     PopUpManager.centerPopUp(curPopup);
     curPopup.stage.invalidate();
private function popupLoadedHandler(event:Event):void
     curPopup.removeEventListener(Event.ENTER_FRAME, popupLoadedHandler);
     setTimeout(function():void{syncManager.loadProject(mainViewModel.selectedUserItem.id,proj ectFile.nativePath,overwrite);},0);

DBMS_SCHEDULER is very powerful and can be a bit unwieldy. I tend to use DBMS_SCHEDULER for jobs which are purely 'in the database' i.e. not specifically APEX-related - in addition, I find it's better for stuff that needs to be run regularly without human intervention (some sort of refresh process, daily cleanup etc).
If you are intending to run this process from APEX as a pseudo "on demand" process (i.e. generated by a user request) and have quite simple requirements (e.g. there's no dependencies on other jobs), it might be worth checking out the apex scheduling API - namely the package APEX_PLSQL_JOB:
http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_plsql_job.htm#BGBCJIJI
It generates a unique job number which you can use to reference its progress - plus it's much simpler to use.
p.s. using DBMS_SCHEDULER, yes the job name has to be unique but you can generate one by either using a sequence or data not likely to be repeated, like the current timestamp.

PRE won't start / incompatible display driver - AMD HD 6750M

Yesterday I downloaded the trial version of PRE 12, installed it, but it won't run. On startup I get the error message: We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver. So, I had a look, but both windows and AMD/Samsung say that I have got the latest driver. Re-booted - still no luck. Searched a bit more and somebody suggested to deinstall the AMD Catalyst Manager and re-install. Which I did also, but with no success. Then I deinstalled the driver and/or disabled the card (sorry, I tried so many things to get it to work...), it defaulted back to a generic windows VGA driver. Funnily enough with that one PRE started. I still got the message, but it started. But obviously everything looked ugly and huge. Therefore I reinstalled the latest driver via the Samsung website (since it is a laptop, the drivers are not provided by AMD) and... again, same message, same bad luck = PRE will not start after clicking the message o.k.
Oh, and I did click 'run as admin' and QuickTime is also up to date.
These are the system details:
Samsung Laptop NP700Z5A-S09US series
Windows 7 64bit
AMD Radeon HD6750M
8 GB RAM
Any ideas how to get it to work so I can try it? Thanks a lot!
Claudia

Claudia,
Several laptop mfgrs. use a dual GPU arrangement, with an embedded Intel chip used to save power, and then an nVidia, or AMD/ATI chip for more intensive computing. Under normal circumstances, the computer will switch between the two, but that is not always the case.
While PrE does not really tax a GPU, like some other programs, it DOES interface critically with the video driver for the GPU. The video driver can be rendered obsolete by such simple things, as an OS update. Most general programs do not need that interfacing with the video driver, and so long as there is a video signal, will function. However, programs like PrE, most extreme games, 3D applications, and CAD programs are different - they need a fully functioning video driver, just to run.
Some users have found that if they disable the Intel GPU (often via the BIOS, or perhaps a jumper/DIP switch on the MoBo), and update the nVidia, or AMD/ATI driver (removing the BadDrivers.TXT file), things work perfectly. Others, whose computers DO switch between the dual GPU's, only require the lastest video drivers for both the Intel and the nVidia, or AMD/ATI chips (with removal of the BadDrivers.TXT file).
I think that it would be better, if the computer mfgrs. had a software toggle switch, that would allow a user to simply turn OFF the power-saving aspect of the Intel chip, when using programs, such as PrE - one would still need to keep that chip's video driver updated, but it would make things easier on people, who wish to edit video, play extreme games, or do any advanced 3D work.
Glad that you found the fix, and that all is working for you.
Happy editing,
Hunt

Mac stuck after start, grey display

after a safari session my mac hung up and does not start again. after the start there is the grey display with the apple sign - so far so good. after that, when usually the display changes to the desktop background the display is bright grey and nothing else happens!!!!! tried several key-combinations on start as "c" "v" "s" etc. (note i only have a blutouth keyboard) and a start from snow leopard-DVD - nothing!
any suggestions?

Resolve startup issues and perform disk maintenance with Disk Utility and fsck

Ipod starts, but display shows nothing

Hello, I have serious Trouble with my Ipod Nano and hope somebody can help me. When I start it, the Display turns on but I don't see anyything on it, except thats it's enlightened. I also here the sounds of the navigation, but nothing is shown on the Display. I already tried resetting it, and put it to its original state with the itunes software. Neither helped. Can somebody here help me with this??

I have the exact same issue with my iPod Photo. I can even play music, although I can't tell what I'm selecting because the screen is just blank, even though it lights up and the click wheel makes sounds.

Macbook Pro start up display glitch?

Today I noticed that whenever I turn my Macbook Pro on, strange visuals appear on the screen (see image). It only occurs for a split second, after the Apple loading screen, then disappears. After start up, I have not noticed anything different in OSX or with my hardware (sounds, display, etc.) My Macbook Pro is the 15-inch, Late 2011, 2.4GHz model. I do have Windows 8 installed through bootcamp, but I doubt it is related to this.
What would be the cause of this? And should it be of any concern?

Your model is known to have issues with the discrete nVidea GPU. Looks like a GPU related issue, and yes, it is of concern. The GPU is soldered to your logic board. If this is the problem , your logic board will need to be replaced. Without Applecare, this will cost you 750-900$.
Run the Apple Hardware test, extended, 3 times back to back. This will take a while to run. Disconnect peripheral devices and plug your machine into your magsafe. This will reliably test your logicboard and pinpoint the issue. If an error comes up, you will need to take your machine in for servicing or considering buying a new Macbook.
Using Apple Hardware Test - Support - Apple
2011 MacBook Pro and Discrete Graphics...: Apple Support Commu

Start-up/Display Video Card Problem

Hi there,
Does anyone know what the error code 2NYD/1/4 ox5 means please? My iMac G4 flat panel won't start-up. I get a kernel panic or just a blue screen. It does start in safe mode, so I am really hoping it is nothing serious, though I can still see lines in the display. I would also like to know if this is a known issue with this model (M8935) that Apple would repair for free. The graphics card is NVIDIA GeForce4 MX. I know some Apple G5 models were issued with faulty graphics cards or logic boards. Were some G4 models also faulty? Thanks
Saz

Hi Ian,
I'm entirely in agreement with what you say and can't think of anything to add whatsoever. That kind of error code can only be dealt with (AFAIK) with a logic board replacement (£325 + fitting).
I would suggest a PMU reset only because it can't do any harm at this stage:
http://docs.info.apple.com/article.html?artnum=95165
cheers
I'd recommend backing up as soon as possible (or using Firewire Target Disk Mode to save data) to an external drive or computer. Repairing this iMac is probably not cost effective.
mrtotes

No start-up display

Similar Messages

Maybe you are looking for