No startup sound and white background in the login screen

I realized that the startup sound (Mountain Lion) disappeared when I reboot, and the login screen is white now, instead of the gray usual one. Further, I think is slower then it was usually in the past. Has anyone an idea how I could solve this problem?

This the file you want to look for:
/System/Library/PrivateFrameworks/LoginUIKit.framework/Versions/A/Frameworks/Log inUICore.framework/Versions/A/Resources/appleLinen.png
Changing this file will give you a new background. If you use a full size image, rather than a tiled one, make sure you leave transparent areas in the PNG file to permit use of the dialog buttons. Took me a bit of tweaking to get a good background I use. Be prepared to have to repeat the process every time you do a version update to the OS, as the appleLinen.png is often refreshed in updates.
make sure you follow all good practices. Make backups and only make tiny incremental changes until you are satisfied with the results. Not reccomended for novices.

Similar Messages

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I solve my problem of black screen when starting up my Mac pro, namely by the button lighting and then i saw the login screen. Hopefully it works for you too.

I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.

It was the PRAM.

My iMac doesn't load past the start up white screen and doesn't reach the login screen.

I'm having issues trying to load my iMac up after i had to to shut it down the other day. when i start it up it makes the chirme
and reaches the white screen with the loading symbol but doesn't move on from there! Doesn't anyone know how to fix this to get to the login screen?

Reinstall Lion.
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How do you change the login screen background?

I have been looking everywhere in the setting on how to change the background on the login screen and i can't find it, does anyone know how to do it without having to download an app?

Make sure you check your operating system first, because there are a few ways to do this.
This is for Mac OS X 10.7.5
First find out what your screen size is by going into System Preferences and clicking on display. Mine is at 1920x12000, but you might want to go with a picture thats a little bit bigger.
Find your picture, I edited mine in photoshop, but I think you can edited in Preview or some other photo converter. Make sure the picture is the same size as the display, convert it to a PNG by exporting it or saving it to a PNG format on to your desktop.
Go to your Macintosh Hardrive
Go to: System / Library / PrivateFrameworks / LoginUIKit.framework / Versions/A/Frameworks / Log inUICore.framework / Versions / A / Resources / appleLinen.png / [email protected]
Make sure your photo file has the same name as appleLinen.png. Replace appleLinen.png with the new picture by droping it in the resources folder.
Make a copy of that same picture and paste it on to your desktop. Rename it to [email protected]. Then replace [email protected] with that picture file.
This should allow you to place a new background to your login screen, but I myself am still working out the kinks. You will notice your sleep, restart, and shutdown buttons will disappear.
Now if you have a much older operating system on your computer there is an easier way to do this.
This is for Mac OS X 10.7.1,2,3,4
First find out what your screen size is by going into System Preferences and clicking on display. Mine is at 1920x12000, but you might want to go with a picture thats a little bit bigger.
Find your picture, I edited mine in photoshop, but I think you can edited in Preview or some other photo converter. Make sure the picture is the same size as the display, convert it to a PNG by exporting it or saving it to a PNG format on to your desktop.
Go to your Macintosh Harddrive
Go to: system / library / frameworks / AppKit.framework / versions / c / resources / NSTexturedFullScreenBackgroundColor.png
Make sure your photo file has the same name as NSTexturedFullScreenBackgroundColor.png. Replace NSTexturedFullScreenBackgroungColor.png with the new picture by droping it in the resources folder.
That's it for that!!!
Good Luck, I hope I can find the answere about why the sleep, restart and shutdown buttons disappear on the screen.
Oh... and don't forget to save the exsisting files that are already there in another folder and lable it.

User with an active Adobe ID on a paid subscription, tries to open InDesign CC and is prompted with a Login screen for the "trial version".

The user had the program open earlier today. But now, she can't open the program and gets prompted with the login screen. I don't want her to login as it mentions the "trial version" of the software. We have a paid subscription.
The application opens successfully on other work stations.
I am running the Adobe CC Installer update on her machine now.
Why did her login suddenly become deactivated?

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
OR
Asked to sign in after paying may help
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
or
http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

How do I get past the login screen?

Hey all,
I just bought a nice new MacBook Pro 15" 2.66 GHz and am happy with it so far.
The problem is I had to buy it because my PowerBook G4 12" decided to die on me. It happened slowly over the course of a weekend. The PB started to get really slow, and I knew it wasn't because of the internet, just figured I had overloaded the hard drive. So I started to move files to an external hard drive. It was slow and every hour or so an application would freeze, and I couldn't force quit, so I would have to shut down. Eventually it got to the point that I wasn't even running other programs, just trying to transfer files, and I would get the swirly rainbow circle.
I transferred most of the files, except for my iTunes collection. I figured, no problem, I have my iPod.
I ordered the new computer, and have realized, that I can't transfer my iTunes collection through my iPod. And now, my PBG4 can turn on, and get me to the login screen looks like it's going to boot up, but goes right back to the login.
Is there anything I can do to bypass the login? I've tried to start it in safe mode, but the PB won't even get to the login screen after 30 minutes of waiting. I also tried holding shift while logging in, but no dice.
I have an ethernet cable, and know that if I can log on, I'd be able to move my info somehow, please help!
Thank you, Lindsey

artschic:
Welcome to Apple Discussions.
Congratulations on your new MacBook Pro. You'll love it.
In terms of your PowerBook G4, apparently your Hard Disk Drive has failed completely and I am not sure what else it wrong.
First, try this:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
If that does not work try Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
If still no dice, try the procedure outlined in the article Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
cornelius

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

Menu > Format > Instant Alpha > slide the cursor over the color you want to eliminate till it looks good
Peter

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

FCP User Manual, page 798.
You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

When I turn on my MacBook Pro and when I am at the login screen, the background is white rather than steel gray. What is wrong and how can I fix it?

When I turn on my MacBook Pro and when I am at the login screen, the background is white rather than steel gray. What is wrong and how can I fix it?

It turns out that iCloud caused this issue. When I turned iCloud off my login screen was completely normal.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Can I create black and white movies using the iMovie app for the iPad?

I would like to make a black and white movie using the iPad iMovie app. Is it possible to film in black and white instead of color?

station_two wrote:
You can open and edit TIFFs, PSDs and JPEGs in Adobe Camera Raw, not just true raw files from a digital camera.
This may sound strange, but I actually got to the stage of regretting ACR several versions back, because you ended up with nothing to do in Photoshop. When you think how far ACR has come since then, you can see how Lightroom (with the same RAW conversion engine and features) is all most photographers need. Adding ACR as a filter inside Photoshop was a master stroke. I wonder who thought of it? Russell Brown would be a good bet, but Chris Cox has made it clear on more than one occassion, that us lay folk dramatically underestimate what goes into coding, intergrating, and proving new features.
BTW That was not a straight line for some joker lauch into tails of woe about all the bugs that make it into final release versions.

No startup sound and white background in the login screen

Similar Messages

Maybe you are looking for