No statpack report from 10g onwards required

I had a query that statpack report may not be required in 10g onwards as AWR (Automatic workload repository) has been introduced since 10g.
I hope, my question is clear that is it possible to allocate a certain amount for memory for the database.
Please revert with the reply to my query.
Regards

Sorry about the post, please do not consider that sentence as my query was limited to only whether statpack report may not be required in 10g onwards as AWR has been introduced since 10g.

Similar Messages

Error after upgrading BI Publisher report from 10g to 11g

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

How to show web layout reports from 10g forms

Hi all ! When I try to open a report file with extension .jsp from a Form using web.show document() or run_report_object() only paper layout is showing on the screen so how I display a web layout from a form with proper documentation or design. Again why only data is showing on the screen without line,ractangle and other documentation but when I run the same report from report builder It is showing all on the screen.Please help how to resolve this. Please provide some proper code or way to solve this.
Thanks & regards
Sanjit

Well,
Web layout means that in place of (or in addition to) the paper layout, you get the report designed in JSP code. So all the frames, repeating frames etc will be expressed in JSP code using the Oracle Reports custom tags. Since it is code-based, you can insert your HTML or Java code in here to customize the output. You can in fact start with the HTML template, open it in reports builder, and start inserting the data using Reports custom JSP tags. In web layout, there are no "page breaks". So your report will be a JSP file, and can be deployed along with your J2EE application.
and see http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
Regards

Migration of Reports from 10g environment to 11g environment

Can anyone tell me the steps or how to migrate reports from oracle hyperion interactive reporting 10g to oracle hyperion interactive reporting 11g environment??
Any kind of help would be greatful and highly appreciated.

OK, apologies for asking the wrong question.
Oracle Enterprise Performance Management System Workspace, Fusion Edition 11.x does, obviously, integrate with the Oracle Business Intelligence 10.x today. EPM is the Workspace and where the Hyperion Interactive Reporting bqy files reside.
Users logging in to https://your_domain.com/workspace are able to consume IR files.
Concerning the upgrade of OBI 10.x to 11g, assuming that EPM remains, there should be no impact on the viability of the IR files.
Having said that, we should seek verification that the OBI 11g product does nothing to adversley affect the integration with EPM.
I hope that helps.
Edited by: SouthernGent on Nov 21, 2012 2:16 PM

Customized Report from 10g R2

Hi,
I am trying to create a customized report which actually joins 2 reports (Hardware Summary and Operating System Summary). Can anyone help me with this. Is it possible at all ?

You might want to post your question to the Grid Control Forum.
Enterprise Manager

Call report from form10g.

Hi all, i has one form and i want to call report name 'DOCK_RECEIPT' from Form.
I create one button name ' CALL_REPORT', and want to when click into this button, form call report above.
But i don't know configure Form and Report, and code for button "call_report".
Now, how must i do for Form can call report?
Please help me.

how to run reports from 10g, check the following links
How to run report from form 10g
Oracle® Application Server Reports Services Publishing Reports to the Web
http://docs.oracle.com/cd/B25016_04/doc/dl/bi/B14048_02/toc.htm
Hope this will help you

4 PDF reports from Single report in reports 10G

Hi All,
i want to generate 4 PDF report from one oracle report in reports 10G.
from the same query i want to generate 4 PDF with different order and result set based upon the query parameter at a single time.
exp: query fetch Some eng/spanish provider and client data. requirement is i want to spilt into 4 PDF:
Provider wise Eng.
Provider wise spanish.
Client wise english.
Client wise spanish.
Can anybody please help on this?
Regards
Abhishek

Hi All,
i am generating 4 PDF reports from one Oracle reports in 10 G.
i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
some time it generates but some time it generate 2 or 3 out of 4.
Can you anyone help me on this issue.
Regards,
Abhishek
Edited by: user651239 on Sep 22, 2008 10:16 PM

Calling a report from a report (10g)

Hi
I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
My hyperlink is formed like this:
/reports/rwservlet?module=reportb.rdf
Is there an additional parameter I must pass to get the report to display on the client browser window?
Thanks

Hi,
Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
Please let me know on how to proceed with this problem.

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Problem in running oracle report from form 10g Version 10.1.2.0.2

Hi All,
I am facing problem while running the report from forms 10g getting FRM-41219
For this i am using the following procedure :
PROCEDURE RUN_REPORT IS
L_RUN_TEXT VARCHAR2 (2000);
L_USRID VARCHAR2 (100);
L_PASSWD VARCHAR2 (100);
L_DESNAME VARCHAR2 (100);
FILE_OUT_PUT VARCHAR2(200);
REP_STATUS VARCHAR2(20);
REP_NAME VARCHAR2(50);
PL_ID PARAMLIST;
REP_URL VARCHAR2(2000);
V_REP VARCHAR2(200);
BEGIN
display_me('RUN_REPORT');
-- CALL THE FOLLOWING FUNCTION, IN WHICH USER CAN WRITE HIS OWN CODE.
-- THE PROCEDURE CAN BE MADE LOCAL TO THE SPECIFIC FORM AND WRITE THE CODE.
-- IT SHOULD RETURN 'Y', IF YOU WANT TO PROCEED WITH THIS RUN_REPORT
-- PROCEDURE.
IF NVL (RUN_REPORT1, 'Y') = 'N' THEN
RETURN;
END IF;
COMMIT_FORM;
IF (GET_APPLICATION_PROPERTY (OPERATING_SYSTEM)) = 'UNIX' THEN
L_DESNAME := 'LP';
ELSE
L_DESNAME := NAME_IN ('REPORT_TITLE.F_FILE_NAME');
display_me(L_DESNAME);
END IF ;
/* SETTING THE REPORT OBJECT PROPERTIES */
/* G_PRAM1 IS THE NAME OF REPORT ****/
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_SERVER,'172.18.76.34');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_FILENAME,:GLOBAL.G_PARAM1||'.REP');
display_me(':GLOBAL.G_PARAM1 '||:GLOBAL.G_PARAM1);
PL_ID := GET_PARAMETER_LIST ('REP_PARA');
IF NOT ID_NULL (PL_ID) THEN
DESTROY_PARAMETER_LIST ('REP_PARA');
END IF;
PL_ID := CREATE_PARAMETER_LIST('REP_PARA');
ADD_PARAMETER (PL_ID, 'DESTYPE' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.RAG_DESTINATION') );
ADD_PARAMETER (PL_ID, 'DESNAME' , TEXT_PARAMETER, L_DESNAME);
ADD_PARAMETER (PL_ID, 'COPIES' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.F_NO_COPY') );
ADD_PARAMETER (PL_ID, 'ORIENTATION', TEXT_PARAMETER, 'LANDSCAPE');
ADD_PARAMETER (PL_ID, 'MODE' , TEXT_PARAMETER, 'BITMAP');
ADD_PARAMETER (PL_ID, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
ADD_PARAMETER (PL_ID, 'PARAM' , TEXT_PARAMETER, NAME_IN ('IBP_REPORT_PARAMETER.F_REP_SEQ') );
ADD_PARAMETER (PL_ID, 'P_COMP_CODE' ,TEXT_PARAMETER,:GLOBAL.G_COMP_CODE);
display_me(':GLOBAL.G_COMP_CODE '||:GLOBAL.G_COMP_CODE);
REP_NAME := :GLOBAL.G_PARAM1||'.REP';
display_me('REP_NAME'||REP_NAME);
V_REP := RUN_REPORT_OBJECT('REPOBJ');
display_me('V_REP '||V_REP);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
display_me('REP_STATUS'||REP_STATUS);
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
IF REP_STATUS = 'FINISHED' THEN
REP_URL:='/REPORTS/RWSERVLET/GETJOBID'||SUBSTR(V_REP,INSTR(V_REP,'_',-1)+1)||'?'||'SERVER=172.18.76.34';
display_me('REP_URL '||REP_URL);
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
ELSE
MESSAGE('ERROR WHEN RUNNING REPORT');
END IF;
END;
Which is called on a button , can any body share there idea to help out
Warm Regards
Ashutosh

Yes, I have replace the userid with scott/tiger@orcl with i6menu/i6menu@vbs and also replace the OAS server's name as you have suggested.
declare
REP_URL varchar2(2000);
begin
REP_URL:= '/reports/rwservlet?userid=i6menu/i6menu@vbs&report=testrep_10g.rdf&desformat=pdf&destype=cache&paramform=no';
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
end;
I had the 2nd code also but both r not working on my machine ......... !!
I have made the following setting on my machine:
1. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->FORMS_PATH ->
Values is : D:\vision_soft\VSS\exe
2. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->REPORTS_PATH ->
Values is : D:\vision_soft\VSS\exe
3. Entry made in the DevSuiteHome_1\forms\server ->default.env
FORMS_PATH=D:\vision_soft\VSS\exe
4. Entry made in the DevSuiteHome_1\reports\confr ->rwservlet.properties
#SERVER= rep10
As my forms is working well & but the report are not able to call.
Could you please let me know is there is any other mandatory setting required for the report 10g.
Regards,
Ashutosh

Report Navigation Issue after upgrading from 10g to 11g

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE

Hi all
I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
Am I missing any upgrade steps?
Please suggest
Thank you and best regards

Hi Deepak,
Thanks for your response.
Oracle also came back to me and looks like my method is not valid:
Hi Jim,
Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
So, in your scenario this is what you can do:
1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
3. Now upgrade OS of Host A to Windows 2008
In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
Here is the documentation which you can follow:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
(Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
11g Release 1 (11.1.1)
Let me know if you have any further questions.
Thanks,
Rishi

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Call Oracle Reports from Forms ver 9i or 10g

Hi,
Can somebody guide me, how to call Oracle Reports from the Oracle form 9i,
Run_product is no more available into 9i & 10g, Run_report_object is not working with out put type "Screen" or "preview".
What is the best way to call the reports from the form ??? pls help...
Thanks in avdance.
Jitesh ([email protected])

You can use RUN_REPORT_OBJECT with CACHE type, and WEB.SHOW_DOCUMENT to view the document on the screen.
In the Forms help you should find examples.
If you have access to Metalink, have a look at Note:207396.1.

Oracle report from 6i to 10g

hi all,
We try to move oracle report from 6i to 10g. however we found that the report's record ordering is different.
The case is that, the record in report is ordered according to the attribute "break order".
There is no "order by" in sql".
It runs without problems in 6i, but in 10g , the ordering of the record has no ordering.
Please help to solve the problems or give some advice. Thanks.

Break order property only works for ordering in break groups. For other groups (like the lowest level group) you have to use order by in your SQL.
That was also the case in 6i, so you may just have been lucky that it worked at all.
This is from the Help:
The Break Order property is the order in which to display the column's values. This property applies only to columns that identify distinct values of user-created groups (i.e., break groups ). The order of column values in a default group is determined by the ORDER BY clause of the query for SQL queries

No statpack report from 10g onwards required

Similar Messages

Maybe you are looking for