No Status Bar when Bouncing Audio

I used to see a status bar when I bounced audio to MP3 or Wave, etc. Now I don't. Anyone know why this may have disapeared?
Thanks,
Steve

It's a bug in Logic 8 - it sometimes occurs on my system and sometimes it doesn't...

Similar Messages

  • Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

    Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Problem w Plug-in Check page: the "Update" button for my outdated version of the WMP plugin does not do anything, and no link is indicated in the status bar when I mouse over the button.

    In Firefox, I select Tools > Add-ons > Find Updates. The Plugin Check page comes up in the browser. The entry for the WMP Plugin indicates it is out of date. I click on the "Update" button and nothing happens. When I mouse over the button, no link is indicated in the status bar (it continues to read "Done").
    The entries for the other plugins indicate they are current. When I mouse over the "Up to date" button for each of those entries, a link is indicated in the status bar.
    I am running Windows XP SP2 on a 2005 Dell Inspiron 6000 (1.6 GHz Pentium M processor, 590 MHz bus, 504 MB RAM). I have Norton Internet Security 2010 installed and running.

    See:
    * http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
    * http://windows.microsoft.com/en-US/windows/downloads/windows-media-player (see Firefox)
    * http://port25.technet.com/pages/windows-media-player-firefox-plugin-download.aspx

  • Display a message in status bar when error in a block based procedure

    Hi
    I have a block based on procedures.
    If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
    here is my insert procedure :
    PROCEDURE emp_insert2(t IN emptab) IS
      BEGIN
        FOR i IN t.first..t.last LOOP
        INSERT INTO emp (empno, ename, job, hiredate, sal)
        VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
        END LOOP ;
      EXCEPTION
        When DUP_VAL_ON_INDEX then
            Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
      END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
    40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
    I want a message like :
    ORA-20002 This identifier already exists

    Hello,
    ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
    I cannot figure out what is the problem described by the second part of the message.
    why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
    http://www.techonthenet.com/oracle/errors/ora06512.php
    So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
    DECLARE
         errcode VARCHAR2(50) := DBMS_ERROR_CODE;
         errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
    BEGIN
         IF vErrCode='-20500' THEN
            MESSAGE('Here display your customized message.');
         ELSE
            -- Handle the rest errors...
         END IF;
    END; -Ammad

  • What is the name in the status bar when we activate a webdynpro??

    hi all,
    When we activate the webdynpro,in the status bar its displayin some name like 1BCWDY/*********==CP.
    I got it is the include program.
    The name getting displayed in status bar and the name in the table WDY_WB_SOURCEMAP differs.
    If i give the component name in the table WDY_WB_SOURCEMAP it displayin all the includes but not the one displayed in status bar.
    Kindly tell me why it differs.

    Hi,
    Check the tables WDY_WB* you can find the relevant ones in these tables.
    These includes can be for the views/components....
    Are you activating the view/component.
    Regards,
    Lekha.

  • Where is status bar when running iphone app

    I've updated my iPad Mini to iOS 7 and now when I run iPhone apps I don't see the status bar (time and battery level etc).  It used to show in iOS 6.
    I see the status bar fine when running iPad apps, just not iPhone apps.
    Any ideas?

    I don't know which app your using but you can try deleting it and reinstalling it from the cloud. If it's in iPhone mode, you should see the 2x but when you switch it to 2x yes the option seems to disappear to go back to 1x when you are using IOS 7.
    I lost the 1x on one of my apps but when I removed and reinstalled, it was there again. The time was showing at the top when I reinstalled it again from the cloud.

  • Can not see size of mail in status bar when composing

    Hi
    You know the status bar of the "compose mail" window, which appears when adding images?
    I does not appear when I add PDF's, is this the right behaviour?
    Is there another way of seeing the size of the message before sending?
    Best regards,.
    - Björn

    pysen wrote:
    Hi
    You know the status bar of the "compose mail" window, which appears when adding images?
    I does not appear when I add PDF's, is this the right behaviour?
    presumably so. that's how it always worked.
    Is there another way of seeing the size of the message before sending?
    you can control-click on the pdf in the message composition window and select "view as icon". this will show its size. then you can control-click again and select "show in place". that's the best i can think of.
    Best regards,.
    - Björn

  • How to bring back status bar when opening Excel doc mail attachment?

    I have an iPad updated to 6.1.3.  When I open up an Excel document from mail it opens the attachment fine and the status bar across the top with the 'Done' option to close the doc appears then disappears altogether after a few seconds giving you full screen access to the file.  No problem there, but bringing it back to be able to close the document is tricky.  Tapping along the top works only sometimes....I haven't been able to find a consistent way to bring it back to close the document.  I can slide down across the top to bring up the notification center but tapping across the top to bring the bar back to close the file will only work after playing around with it for about 20 touches or so.  Is there a trick to this or a way to keep the status bar there?  Thanks in advance!!

    Then quit the mail app completely and reboot your iPad, then try again. What we are describing is the way that it is done. Your mail app might be just acting a little hinky now.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to avoid JS Error in the status bar when report doesnt contain value.

    Hi
    Whenever the tabular report doesnt show any records for the given input parameter (parameter passed using select list item).
    We are displaying error message in APex. But at the status bar, it is showing "Error" (unspecified
    error).
    Kindly let me know how to avoid this kind of error at status bar.
    Thanks
    Vijay

    Hi Vijay,
    Your javascript is probably trying to access one or more of the items within a displayed tabular form - the "f01", "f02" etc named items.
    If your script does something like:
    var x = document.getElementsByName("f01");
    ..rest of your code for f01 items..you can test if there are any "f01" items by doing:
    var x = document.getElementsByName("f01");
    if (x){
    ..rest of your code for f01 items..
    }If there are no items, x is null, so the "..rest of your.." script will not get executed and no errors will occur.
    Andy

  • ShowModalDialogue displays status bar when not told to

    Hi
    I am using the below code to display message box to the user
    var sOptions="dialogHeight:150px; dialogLeft:200px; dialogWidth:500px; help:no; scroll:no; status:no;";
    var intRet = theApplication().ShowModalDialog("MsgBox_orig.htm", arr, sOptions);
    Even after passing the value status as ‘no’, the status bar is displayed.
    Browser being used is IE Version : 6.0.2900.2180.xpsp_sp2_qfe.080814-1242
    Siebel Version : 8.0.0.3
    Please let me know how to fix this.

    i was getting the spinning grey wheel in status bar, with no files displaying.
    this thread describes re-launching Finder - which did the trick for me - though my issue was with the internal hard drive, not an external
    https://discussions.apple.com/thread/3649473?start=0&tstart=0

  • TS3274 Wy"No service " on status bar, when the internet is working?

    I have "No Service " on the status bar, but can get get internet service, why?

    Hi lalcia95,
    If you are having a No Service issue on your cellular iPad, you may find the following article helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • Supress message in status bar when using Call Transaction

    Hi,
    I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
    As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
    But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
    I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
    Please let me know for more information.
    Thanks,
    Manoj.

    >
    kaka79 wrote:
    > I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
    > But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
    > I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
    The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).

  • Is there a way to hide the status bar when reading a book in iBooks?

    Every other ereader app seems to hide the status bar (at the top of the screen, with battery etc) automatically, or there is a setting to do so. I can't seem to be able to do this in iBooks. What am I missing?

    Nothing - afaik iBook can't do that trick

  • Error when bouncing audio to movie

    Has anyone else experienced this? As a workaround, I've had to bounce the audio to a stereo aiff file; then create a new project in Logic and import the QuickTime Pro video into this new project; then bounce the audio to the movie file.
    It's not such a big deal; but I think it should be addressed more assertively by Apple. (some have suggested that I just import the movie directly with QuickTime Pro -- or maybe I should be looking at learning SoundTrack Pro?)
    Thanks in advnace!
    Tom

    Doesn't work with external hardware (Synths & FX)
    Do a bounce of your song.
    Import the bounce add it to the arrange window. Solo the audio track.
    Then bounce to movie.
    You can't have a movie offset either.
    It will add the audio to the beginning of the movie no matter what.
    You have to cut the movie to the song length with QT Pro.

  • Pages that are shown in the status bar are docked to the right instead of the left..how can I make them go back to the left again?

    A couple weeks ago my computer did an automatic update to a newer version of Firefox (it is now 3.6.8). Since this update, every time I open a window, it is docked to the right side of the status bar, when it used to be on the lleft side of the status bar. Also, several windows opened do not all show-instead only one window is shown and it will say how ever many windows I have opened (such as "3 firefox windows" instead of just showing those 3 different windows when it was docked to the left side). I have looked through the help section but cannot find an answer to this. I have looked through the "tools", then "options" section and compared my computer to another computer running the same firefox that has the windows opened docked to the left, and they both have the same exact settings, so it doesn't appear to be an issue with my "options" in firefox. Any help would be appreciated.

    See: http://windows.microsoft.com/en-US/windows-vista/Taskbar-recommended-links

Maybe you are looking for