No stereo input in logic8, analog or digit., when not in universal track m.

till now , in logic7 , I didnt work in Unversal track mode. When upgrading to logic8 ,its not possible to create a stereo input, analog or spdif,. When I try to record , I cannot see the waveform in arr. window, but when I stop rec. , the record is done. There is no problem in universal track mode,
but I dont want to change because of my older songs. Is there a solution ?
Message was edited by: ernesto e.

With UTM disabled, only the odd numbered tracks can be made stereo. This is because for a track to be a stereo track with UTM off, it needs the even numbered channel beside it.
If you click on the circle at the bottom of an odd numbered track (1, 3, 5, etc...), making it a stereo track, look at the even numbered track beside it. It no longer exists, because it has now been put to use as the "right" side of the stereo image.
I'm wondering if this is what you are experiencing, and getting confused by...?

Similar Messages

  • HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

    Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

    You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
    You might try a 3.5mm to RCA adapter
    from the Mac Mini's headphone jack to the TV's audio input,
    but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
    Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

  • Stereo input on SB

    When I send a stereo signal on SB 5. using a Y cable into the input, my computer only receives a mono signal.

    picklehammer wrote:
    Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella
    You just can't record analog mono instruments as stereo without a stereo microphone.
    If you mean to record a signal which 'stays in the middle' and not 'panned left or right' then you need
    - mono to L+R (stereo) convertor adapter
    or
    - mono to R+L (stereo) cable
    between (pre)amplifier output and soundcard input.
    <i>Note: Normally instruments are recorded mono --> easier to set instrument positions in final stereo mix</i>.
    ) yes it is stereo
    2) no game/midi on Value. Purchasing Digital I/O won't make any difference to this.
    3) dunno, see yoyr user manual
    .jtp

  • Stereo Input=Mono??

    I'm new to Garage Band and macs in general. I was using Adobe Audition 3 on a Vista based laptop and have just switched to a Macbook (black)I'm using the same set-up as I was with Audition. A Behringer (Xenyx 802 with 2 mics) mixer with L/R 1/4" patch cables (for output) into a 1/4" Y to stereo 1/8" jack into the line input of the macbook.
    I have the proper input set up in preferences and select Stereo input. When I record It shows two channels recording, but on the meters only the upper one is working. If I switch to mono, it shows 1 channel recording, but BOTH meters are now active.
    Am I missing something??

    This may be a dumb suggestion, but I have the same set-up, and sometimes when I am getting only half the signal, I just turn the line-in around a bit. That usually does it.
    If that doesn't solve it, I would suggest using the RCA out straight to the line-in on the laptop (I assume your mixer has them) instead of the 1/4''-it could be something weird with your adapter.

  • DDTS-100 Issue - PC Switchbox Works but Stereo Input to Decoder does not

    I recently sold a DDTS-100 to someone on eBay. It was working fine for me when I shipped it. I had an XBOX, PS2, PC, and TV Tuner connected to a Creative Inspire P5800 5.1. The new owner states that the PC works fine with the switchbox, but when switched to "decoder" he gets no audio from stereo inputs from his XBOX. Anyone have recommendations or link to a site, forum post, or other, for him as far as root causing the issue?

    Yes, I read it here: http://www.ausmedia.com.au/Creative%20DDTS-00.htm
    I was thinking, the only way I can think of doing this, and I'm not definately sure you could either, is to connect a 7.1 sound card to the switchbox of the DDTS-100 decoder with a 7.1 audio cable (lime green, black, orange and grey), with only the standard 5.1 connects (lime green, black and orange) going to the switchbox, and the grey/side speaker connect going into a pair of active speakers or a hi-fi. As I say, I'm not sure - but maybe this is something along the lines of what they meant? Other than that, maybe the reviewer was high at the time! :manvery-happy:

  • 1820m Stereo inputs split into mono inputs?

    Hi,
    I want to split the stereo inputs of my 1820m into mono inputs so I can record multi-tracks on Cubase. Is this possible?
    Thanks in advance.

    When you set up a strip in PatchMix, it is seen from inside Cubase as a stereo ASIO channel regardless of whether you use both inputs. Pan one hard to the left, the other hard to the right, and then work out your VST connections in Cubase, and route (say) the one you panned hard left to a mono Cubase channel's input, and the one you panned hard right to a second mono channel etc., then you can record each input signal onto different tracks.

  • How record line-level stereo input on GarageBand iOS?

    I'd like to record line-level stereo input sent from my Mackie mixer to GarageBand on my iPhone 4S. I tried plugging a standard 1/8" stereo cable into the headphone jack, but no luck. The GarageBand manual suggests that this is possible, and there is one (pricey) cable I've found that seems to handle this, but it claims that the audio input is mono only, suggesting that I may need a cable connection to the dock (not the headphone jack) to handle stereo.  I can't find a cable to do this, however...ideas?
    Many thanks,
    Jim

    Sonoma Wire Works' "GuitarJack Model 2" iOS peripheral can help you do that. It's expensive though.

  • I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from

    I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from lightroom slideshow and choose the 1920x1080 resolution the end product is a very small video in the middle of a black background.  i have double checked and do not have any borders turned on.  Another option would be to export from the library but lr mogrify does not seem to put text overlays on video either.  Any input would be welcome.

    I dont understand anything you said in your post.
    Do you have a specific question about video production?
    The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
    Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum.

  • Input help for cost center & WBS element not working

    Hi ALL
    We are using SRM 4.0 with backend ECC 5.0.
    Input help for attributes cost center (CNT), WBS element (PRO) are not functioning.
    When tried to search for input help (F4) on the above attributes, I am getting message "Display not possible (Inconsistency in the input help)".
    I even applied SAP note 746788 for cost center search help.
    Can you tell me if I have missed any config settings?
    Thanks in advance
    Jagdish

    Hi,
    Did you managed the transactional RFC destination in the customizing (where you define all your log. systems it is an additional field in the table control).
    Regards.
    Vadim

  • How to stop iphone 4s from putting a space after the second digit, when entering a text number from the keypad

    How do I stop the iphone 4s from putting a space after the second digit, when entering a text number from the keypad. Entering a text number on the key pad like 61998 comes out on the screen as 61 998 and the sms fails to go.

    The space (or lack thereof) should have no effect on whether or not the SMS goes through. The spacing is intended to make it easier for the human eye to comprehend the number. I'd start by resetting the network settings in General>Reset>Reset Network Settings.

  • Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

    When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
    Logic Studio 9.1.7, OS X 10.7.5

    Hi
    Playhead in the right place?
    CCT

  • Input does not work when not focusing the desired track

    Hello
    Sitting and working on a track here pretty much for the first time in logic X. I work with much outboard gear so I always send channels out and back into an input.
    The input channel which comes from the outboard gear now gets muted if I do not focus the track in the mixer or the working area, and yes the input is marked on.
    Anyone know anything about this?
    Cheers

    You need to make sure that it also returns true during the apply request values phase of the next request and thus not only during the render response phase of the initial request.

  • No batch input data for screen SAPMSSY0 0120 when running BDC in background

    Hi Experts,
    I am facing an  issue "No batch input data for screen SAPMSSY0 0120" when running a BDC for VA01 in background.
    The scenario is like we have EDI orders coming into SAP in the form Idocs. These EDI orders are processed by Function module
    IDOC_INPUT_ORDERS. This FM module internally calls VA01 (Call Transaction) to create Sales Orders in SAP.
    Now we have a scenario in which we want a popup screen to come up  & ask for selection of record from list of records displayed on popup screen. In background since we can not show up a screen, we are programatically selecting the record we want & going ahead.
    Now what is happening is during foerground the functionality is working abosultely fine, that is incoming idoc is getting posted successfully in SAP with status of 53. Incase of back ground processing of the same we are getting an error
    No batch input data for screen SAPMSSY0 0120
    I have checked this screen through screen painer(SE51) & i did not find any element on this screen but Element list
    shows one field Syst-Xcode.
    Kindly guide me how to fix the issue so that the same can work as expected in background.
    Regards,
    Chetan.

    Hi Chetan,
    List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
    Hope this helps, harald

  • When you set up tracks what is best to pick for the input and output?

    When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

    First part of the question I don't understand, so could you elaborate please?
    Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

  • Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

    Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

    Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12.  Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10?  If so what specific error are you receiving?

Maybe you are looking for