No Stereo Panning through interface

Okay, so I wrote awhile back about how best to create strong stereo panning effects and found that the directional mixer is by far the best plug-in to use. I am running Logic Pro with a Presonus Firestudio. Now when play back a song that has stereo panning effects I cannot hear the panning effects through my monitor or headphones when I am listening to audio signal being sent back through the Presonus device. However, when I listen to headphones plugged into the back of my iMac, I can hear the panning very well. Is this a Logic setting problem, a wiring problem, a set up problem?

I think your output channel in Logic is set to "Mono"
Check your output 1+2 in your mixer.Make sure that it is set to be a stereo playback channel.
Also, if you are going to an outside analogue or digital mixer, please make sure your two playback channels are panned hard left and hard right, for this to work.
Check your Presonus Device (which one is it????) and make sure you don't have some pan setting wrong on it.
Cheers

Similar Messages

  • Can iPAD bluetooth like MacBook Pro to establish a PAN through iPhone?

    For my MacBook Pro, I can feel free to establish PAN through BlueTooth to my iPhone, which has enabled Tethering for internet sharing. I would like to know whether iPad can also support it so that iPad can connect internet through iPhone BlueTooth Tethering?
    I wonder it would be pretty wastage to sign two contract with 3G carrier, one for iPhone and one for iPad.
    Please comment.

    You can't tether an iPad to an Iphone. The bluetooth profiles on the iPad do not support that. See:
    http://support.apple.com/kb/HT3647

  • How do i reverse the stereo pan in Final Cut Pro X

    how do i reverse the stereo pan in Final Cut Pro X

    For anyone that wants to know: Final Cut Pro X: Configure audio channels

  • How to create reference, when an instance is created through  interface

    Hi All,
    How to create reference, when an instance is created through  interface.
    Regards,
    Lisa

    hi
    good
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5f54f411d194a60000e8353423/content.htm
    /people/jocelyn.dart/blog/2006/06/28/getting-started-with-abap-oo-for-workflow-using-the-ifworkflow-interface
    THANKS
    MRUTYUN

  • Attachment through interface table (OE_HEADERS_IFACE_ALL)

    Dear,
    i have make customization in Order Management Module
    currently i am loading data through interface tables i.e
    OE_HEADERS_IFACE_ALL
    OE_LINES_IFACE_ALL
    now, a new requirement is generated by the management to make the attachment in the customized application. User will write the long text in the text field and after the interface table has been processed through ORDER IMPORT request. text will be saved in the attachment tables i.e
    fnd_documents_short_text
    fnd_documents_tl
    fnd_documents
    fnd_attached_documents
    Kindly Guide,
    Regards

    See Add Attachement to Sales Order
    Sandeep Gandhi

  • How do you manually edit stereo pan keyframe values?

    I would like to manually edit stereo pan keyframe values instead of dragging them with the mouse. Is there a way to do this?

    SuiteSpot wrote:
    Pretty sure this has been mentioned before but with this new look forum there is a good chance it won't be missed now
    Hehe! Very good... and yes it has, on more than one occasion.
    On the subject of keyframes, there's at least one other modification that some might find useful - and that would be a means to control the 'aggressiveness' of the spline created without having to move a load of points. iZotope do it with a slider in RX in their NR and there, it's quite useful sometimes. Personally none of this bothers me too much, because I very rarely use the automation at all these days - it screws with the background noise on live recordings!

  • Release Sales Order through Interface ?

    Hi
    Anyone can guide me that How to Release the Sales Order through Interface table .
    This is an urgent need.
    Thanks in Advance to all of you.
    regards
    Sanjay

    Hi,
    Your question :  What is the difference between Release Sales Order Form & Shipping Transaction Form?
    In Apps, Release Sales Order Form is basically used to move Material from Inventory to your staging area e.g stock yard (pick release activity), at this point the material is still inside your premises..
    Shipping Transaction Form is basically used to move material from staging area to customer site..
    Your 2nd question is : Pick Release can be done from both the forms.What is the difference.??
    Through Pick release form you can do pick release where you don't need any grants... and to do the same through Shipping Transaction form you need to have access rights to do ship confirm and pick release.. In other words, Through Shipping Transaction form you can restrict/allow user to do pick release where as in Pick release form no such restrictions are there..
    Shipping Transaction form is basically a combo package :) through which you can control Pick release, Ship confirm, Delivery etc..
    For the Grants and Role you can check details under : Setup --> Grants and Role Definitions --> check Grants & Define Roles form..
    Roles form will let you what are the actvities can be done and can be assigned to users..
    Hope this will help...
    Regards
    S.P DASH
    Edited by: spdash12 on Oct 27, 2009 10:43 PM

  • Update PO item rate through interface or API

    Hi
    I have a scenario in which PO is created from PR through Autocreate but items rates need to be populated through interface or API. Please any doc or sample example on how to do that???
    I havent done interfacing or used api a lot before i was just on reporting side. I will be highly thankfull if Detailed Steps provided.
    regards

    Hi Goutam,
    Check with the following exits:
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002  Customer function exit: Segment text in material doc. item
    MBCF0005  Material document item for goods receipt/issue slip
    Regards,
    Tutun

  • Stereo Music Through Bluetooth Phones?

    I found out that the iPhone is capable of putting out stereo music through the Bluetooth phones, but ONLY while you are on a call. Then I found this:
    It appears that you can also engage this functionality by going to the voicemail screen and clicking on the audio source button in the top right-hand corner, then selecting the bluetooth device and subsequently selecting the iPod function and playing audio. This method does not require an active phone call.
    Is this the only way to do this?
    Thanks
    Tom

    Wow. I was unaware that there was any way to play music through Bluetooth headsets! I have a question for you, when music is played thru Bluetooth headsets and a call comes through does the music pause and the call comes thru the Bluetooth and then does the music resumes through the headset when the call ends. Or does the incoming call break the bluetooth connection?
    Message was edited by: L. L.

  • Decisive answer 2 difference between Pref Stereo Panning Mode and Advanced Session Properties Mixing

    Since Steve refused to give a clear answer on this issue, I will attempt to address it.
    I think the Preferences>Stereo Panning Mode only has to do with the panning of individual stereo tracks and there overall volume level.
    Where as the Advanced Session Properties>Mixing>panning mode Has to do Only with the Master Channel's panning and overall volume level.
    amirite?

    What I mean is that Under Preferences>stereo panning mode it only affects the volume of tracks when they are panned, it has no effect on the overall volume.
    Under Advanced session properties>mixing>panning it subtracts 3dB when set to -3dB center, if everything is panned center.
    I don't understand exactly what what the latter does when set to L/R logarithmic other then it makes the session not play at -3dB but rather at the file(s) real level, if everything is panned center.
    apparently, when using L/R logarithmic for either one: if everything is panned in different directions and you have some mono tracks, all bets are off .

  • How to create the PO based on requisition through interface.

    Hi,
    In P2P,
    How to create the PO based on requisition through interface.
    Regards,
    Srikanth

    Hi Srikanth,
    I knew it from frontend.
    But i want from backend using INTERFACE .please see if this can help you
    http://appshub-hussy.blogspot.com/2010/10/requisition-and-purchase-order-queries.html
    http://oraclemaniac.com/2012/04/17/sql-queries-to-get-requisition-po-and-po-receipt-details/
    SQL to link Requisitions with Purchase Orders
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-find-the-po-number-if-we-give-requisition-number-3161211
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/need-requisition-sql-query-1338985
    ;) AppSmAstI ;)
    sharing is CAring

  • 10.6: Apple and our customers place a high value on simple, refined, creative, well thought through interfaces. They take more work but are worth it. Apple sets a high bar. If your user interface is complex or less than very good it may be rejected

      i am newbie in IOS  i am web developer
    so i use html 5 and i development jquery mobile based application.
    in my application i just call view from web.I used objective c webview .
    but my application rejected  following issues
    - Included low resolution/jagged image/s; see screenshot
    - Portions of your app loaded, refreshed, ran, and/or responded very slowly.
    - Was not optimized to support the device screen size and/or resolution; see screenshot
    - Did not integrate with iOS features.
    they said your app is slow but app speed is good(you can see here : http://teknonova.com/Map)
    they said did not integrate with ios features .yes i just call URL from web view?is it illegal?
    and they gave issues screenshot  there is no problem with screenshot .it is good : (http://a1523.phobos.apple.com/us/r30/Purple/v4/c3/76/8a/c3768ae0-9b41-820f-9315- 40db2afc57b6/temp..gwvpnmiu.png) 
    what should i do?
    should i delete and add new app?

    10.6: Apple and our customers place a high value on simple, refined, creative, well thought through interfaces. They take more work but are worth it. Apple sets a high bar. If your user interface is complex or less than very good it may be rejected
    for this problem what is a good solutions, how need to solve our problem, we need to published our apps. so plez telme the solution for this resons

  • Using the Ipod with a car stereo head unit interface

    I have a Kenwood stereo head unit with a kca-ip500 interface for the ipod in my car so I can control the ipod through the head unit.
    I was using my mothers old Ipod Nano with it and it was great because when you turn the car off, the song would pause and then when you start your car again, the song would continue on.
    Now that I have my own Ipod, the 6th generation Nano, the ipod does not automatically turn on when i start the car unless it was on not long ago. Meaning the ipod turns itself off eventually and the next day when i drive my car I have to pull the ipod out of the glove box and turn it back on. I did not have to touch my mothers ipod, it just automatically turned on for me.
    Any way around this so the ipod automatically turns on when it is fed power???

    http://support.apple.com/kb/HT1353
    You did not answer my question, was it a firmware update for you iPod or you radio.
    Firmware updates for iPods are done through iTunes, did they send instructions on how you were supposed to load it?
    What was the filename?

  • Audition CS6 - Stereo Panning with Mono Content

    I'm mixing a stereo soundtrack for a feature film.  All dialogue and sound effects content is in mono and the score is in stereo.  All of my content is placed in stereo tracks (I learned the hard way that the panning feature doesn't exist in mono tracks), whether it's stereo or mono.  Even though Audition isn't a DAW, I assumed it would function just like any other multitrack application for mixing purposes, but it appears I'm wrong unless someone can tell me what I'm missing.
    I've gone through and added volume envelopes throughout all of the dialogue tracks, and now I'm trying to start placing them within the stereo field.  The pan envelopes are there, but whether I move a clip to a static position in the stereo field (such as 50% Left) or I automate movement through the stereo field (start at 50% Left and move to 50% Right), none of the changes are actually taking place.  The panned track is still sitting there right in the middle of the stereo field.  Even if I adjust the pan knob on the track itself, the audio is sitting dead center regardless of where it's panned.
    So as it stands, I have about thirty tracks of content, where all of the music is in stereo and every bit of dialogue and all sound effects are sitting right in the middle.  Needless to say, that's not a good approach for mixing a stereo project.
    What am I missing?

    Yeah, that's why I'm so confused.  Here's how everything is set up:
    All of my dialogue and ADR clips are mono, however they have all been placed on stereo tracks.  All of my dialogue and ADR tracks are being sent to a Dialogue/ADR Bus (mono).  The same with all of my sound effects.  Stereo tracks containing mono clips, all being sent to a mono SFX bus.  All of my soundtrack/score is being sent to a stereo score bus.  The three buses are going to the master stereo out.
    When I pan the individual buses, it works fine, regardless of whether they are stereo or mono.  But when I work with individual mono clips in my Dialogue/ADR/SFX tracks, none of the pan automation works.
    I might've screwed something up, but I originally had all of my mono material set on mono tracks, until I realized later that panning isn't an option with a mono track.  (All DAWs I've worked with didn't have this limitation, which is why I set it up that way.)  So I created a bunch of stereo tracks, copied/pasted the mono clips into those, then got rid of the mono tracks.
    What's goofy is that none of the new stereo tracks I created have "Pan" as an option when I click on the "Read" drop-down and select "Show Envelopes".  My score tracks (the original stereo tracks I created when I brought everything in) DO have "Pan" as an option.
    So, even though the new tracks are stereo (they have a pan knob on both the mixer view and the track header in the multitrack view) and there are blue pan envelopes on the tracks, there is no pan envelope in the automation lane, so I'm guessing that's why the pan functions aren't working on the individual tracks.
    I just don't understand why the pan envelopes don't exist on the stereo tracks I recently created, but they do exist on the stereo tracks I set up from the get-go.

  • How to Find PO Number after Importing PO through Interface Table

    Hello All,
    I am Importing PO through an Interface. now I wanted to find PO Number(Segment1) which has been created.
    Please tell how to find PO Number....?
    Thanks in Advance
    Regards
    Ravi Raj.

    Got Answer

Maybe you are looking for