No stereo sound from I/O

Hey all! I have an Audigy 2 ZS Platinum Pro card, and for some reason I cannot get any stereo sound (only mono) from the I/O hub, both through the headphone out, as well as through the headphone out on a MIDI controller plugged into the hub via firewire.
5. Surround Sound works in all 5 speakers connected through the analog miniplugs on the card, and stereo sound works through the headphones when they are plugged directly into the speakers via a headphone out there.
Any suggestions as to how to get stereo sound to work from the I/O hub?Message Edited by freechus9 on 07-30-200707:00 PM

anyone?

Similar Messages

  • Stereo sound from all speake

    Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

    Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

  • Ipod doesn't produce stereo sound from iphone built-in speakers?

    I've had my iphone for some time now, but just noticed that when playing music from the ipod built-in to the iphone, the music is only coming from one speaker (the one on the bottom left).
    Is that normal? I would assume both speakers would be used?
    I checked the settings and couldn't find a setting for "stereo sound" and did a forum search and couldn't find an answer.

    fair enough i didn't think i had posted it in the right forum, so i posted it in the ipod/audio one as well....
    anyway, thanks for the answer.

  • Stereo sound from netbook

    Hi all - have just bought an HP Netbook 110-3104 - it seems to suggest it has 2 speakers however only sound comes out of one.
    When I try the same sound via headphones - then sound in stereo.
    Do the netbooks play in stereo ? - (if not why do they appear to have 2 speakers)
    Thanks
    Brian

    OK...So this notebook comes with single Speaker only to the the best of my knowledge...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Audigy 4 - no stereo sound from lin

    I just bought an Audigy 4 soundcard. I'm using to record guitar and vocals with Adobe Audition. Problem. My guitar is only recorded on the right side when it plugged into line 2 of the box. Before you answer,
    ) it is not the pan feature in Adobe Audition (it's set dead center)
    2) it is not the type of cable I use to connect to my guitar
    3) it is not any setting on my guitar (the guitar records on both sides when plugged into line /mic)
    I think it is the line 2 jack on the Audigy box but I hope I'm wrong because I don't want the hassle of sending this back.
    If you have suggestion to help or to troubleshoot, I would appreciate it.

    anyone?

  • Strange Line In problem with my X-Fi Elite Pro. Stereo sound comes and goes

    I have an X-Fi Elite Pro with latest drivers installed. Everything works fine, except for the Line In port in Entertainment mode. I have an AverMedia TV/FM card and its audio output (stereo) is plugged in my X-Fi's Line In/Mic In (PCI). The problem is that I get sound only from the right channel but not from the left one, so the sound comes out in mono. From time to time, I get to hear in stereo (both channels) but it seems a random event. This input works just fine in Game and Creation modes btw.
    Stereo sound from this particular input comes and goes in random order and sometimes I get about 50% on the left and 00% on the right channel. Sometimes, left channel volume fades in and out slowly. I already did some troubleshooting such as set Line in/Mic In/Digital In to "Line In/Mic In", speaker diagnostics, checked it in Game & Creation modes, turned to default values and so on but I still get this problem.
    Seems pretty wired. A ghost in the machine! Creative products never seize to amaze us!

    Soo...your're calling me stupid? Well, perhaps your right, but then again, I might have a point!
    Read my post again.
    If you still think it's too low with SVM enabled and everything is turned up...then I'm affraid you're out of luck and might consider buying another speaker set, if it's a major issue to you.

  • Imac mid june 2011 ..connected toslink to optical to my hometheatre and yest io only get stereo sound..audio midi setup 5.1 is greyed out ? help ?new to mac

    guys after a long time...i finally shifted to mac ...a long time windows user...so far the experience is been good..
    ok here is my first problem with this setup
    in india its a pain to get a toslink to mini adapter ...finally i found one and connected the mini end to headphone jack behind my imac...
    (imac 21.5 mid june 2011) and optical end to my hometheatre ...
    in audio midi setup the multichannel option is set to stereo 2ch 16 bit..
    perian is installed and set to use dolby prologic..
    i only get stereo sound from itunes,vlc or movist or even xbmc and boxee...tried them all configured the audio to use 5.1 but no luck,
    questions
    why is 5.1 greyed out ?in audio midi setup ?
    i am using my mac to create multimedia content and knowing how the sounds created will be heard helps me a lot..
    i have invested a lot (3 years savings in this mac) and i wouyld very much appreciate all your help..
    i also purchased a griffin hdmi port which connects to my tv but the audio is still stereo..
    finally got a toslink http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-TOSLINK-mini-Toslink/dp/B00006LV F3 this one ...still only stereo...
    any help would be greatly appreciated .....

    Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
    One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
    Carl

  • How can I get sound from tv or stereo when watching netflix on MacBook Air?

    I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook.  How can I get sound from other sources ie tv or stereo?

    Check with Netflix for their system requirements.

  • Sound from speakers & headphones is monaural NOT stereo HP Pavilion TS 15 Notebook PC Win 8.1

    My HP Pavilion TS 15 Notebook PC  is only 2 weeks old I found out soon after I got it that any test I do of the left and right speakers or headphones is not stereo.   When I click on the left speaker I hear the sound in the center and when I click on the right speaker I hear the sound in the center.  I have tried a test from the internet same results.   However, if I connect a bluetooth audio device then when I click on the left speak I hear the sound on the left only and when I click on the right speaker I hear the sound in the in the right only.  Also when I boot the computer with Ubuntu 13.10 there is stereo distinct sounds from either the left or right when I run the left right test. 
    At first and before I installed Ubuntu HP was sure it was a hardware problem and sent a tech out to install a circuit board which the headphone plug was on, thinking the jack was defective and mixing the left and right channels.   That didn't fix it.  I went to the Realtek website and ran their program which removed all traces of the sound driver and installed the newest one they had, didn't help.    Hp log into my computer and cruised around but found nothing wrong.   I have played with every sound setting there is, no change.   The final solution they suggest is to reinstall Windblows 8.1.  I really don't want to do this as I just did it to transfer from my win 7 notebook to this one using windows easy transfer.   FYI this computer is one HP sent me to replace the previous G6 Win 7 notebook which had unresolvable problems, worse than that this is the 3rd computer HP has send me to replace previous ones which each had their own set of unresolvable problems.  So I haven't had very good luck with HP computers!
    Anyway I am left with maybe a couple possibilities.   1. Reload windblows, I cannot use easy transfer because it no longer works on win 8.1 (maybe file history will work though I'm not sure)   2. Try windows refresh which won't remove as much of what I have installed.   3. Maybe someone has experienced a similar problem and can share here.
    Any help is appreciated.
    Michael
    UPDATE:
    HP wanted me to do a clean reinstallation of Win 8.1, sent me the disks to do it, but the disks were defective and wouldn't go on to the second disk.   I used the Disks I had made from the computer they worked and the reinstallation was completed.   That didn't resolve the problem!   They decided to send me a replacement computer.
    The new computer is a  HP ENVY TS 15 Notebook PC with win 8.1 updated.   Same problem except the speakers seem to be in stereo but the headphone jack is still mono.   I chatted with HP last evening and was told this is a "Known problem and the fault of Windows 8.1"    Can someone tell me if this is true?    I have doubts but really want to know.
    Michael

    Hp replaced this computer for me due to this problem, however, the Envy (dumb name) they sent me to replace it had the same problem.   I did fine a solution and here is the web address http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/envy-17-headphones-in-mono-not-stereo/td-p/...
    Read down a few posts for the solution by making changes to the registry.   But, my problem and the solution was with a win 8.1 computer and I do not know it it applies to Win 7.  Unless, you have the same sound card and driver, which I doubt.  If you haven't removed the sound card driver and reinstalled it with the one on the HP website do try that.
    Good luck.
    Michael

  • Left and right channels of stereo sound coming only from left spea

    The title says it all. I can't figure out what's wrong. I checked all the settings I can think of, but nothing seems out of place. It's not the right channel cutting out, but both channels coming from the left speaker (I used the speaker test feature to confirm this). This just happened out of nowhere when I booted up my pc. Any idea what's wrong?
    *Oh, and this is an Audigy 2 (plain version).Message Edited by Geise on 2-3-2005 : PM

    Did you ever fix this problem? I have the exact same thing happening to my sound.
    All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
    So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

  • Cant stream video sound from ITunes to stereo via Airport Express

    I'm using a PC with wireless (Centrino 802.11g) with Itunes (Latest release 7.0.0.70) and for some reason the sound from Itunes video will not stream wirelessly to my stereo connected to my AirPort Express.
    When the video is embedded in an Itunes playlist of MP3s, the sound will work fine through the AirPort Express with the MP3 tracks, but will toggle over to the PC speakers for the video.
    Any ideas gratefully received?

    Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
    The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
    Therefore, I'm not aware of any solution to this issue.

  • How to make stereo sound play also from rear speakers on X-

    X-Fi is excellent card. Just one question though (CMSS 3D disabled, 5. speakers set correctly): when I play stereo file (like MP3) the sound comes only from front speakers. Well it's logical of course but my old Audigy duplicated the sound also to rear speakers (the center speaker wasn't used) - so is it posible also on X-Fi to play stereo music from rear speakers too without enabling CMSS?

    Actually I just found out that this CMSS3D is VERY good way to expand stereo to 5. (although it's not what I originally meant) - so no need to reply me but I'll welcome any opinions anyway.

  • No output sound from output port/analog audio: Need help

    hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

    I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
    plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
    For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
    i hope this works for you. good luck and have a good new year.

  • Recording sound from DVD and CD play

    I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

    Try this:
    1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
    2. Press the Back/Options .You may need to do this more than once until the main menu appears.
    3. Select Extra button to start a line-in encoding.
    5. On your external stereo source, start playing the song you want to encode.
    6. While encoding, you can press and hold the Back/Options button and select one of the following items:
    Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
    Stops and saves the encoding. You can also stop the encoding by pressing the Record
    Split Ends and saves current recording session, and begins a new one.
    7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
    This information can also be found in your user's guide, it's a .chm file found in your installation cd.

  • Inspire 5200 5.1 sound from both R & L rear speakers coming from left rear speaker only

    I have done a complete sound system check, every thing check out good. From the rear speakers I am only getting sound from left rear. When i do a speaker check, when right rear speaker lites, sound comes from left rear. when left rear speaker lites sound also comes from left rear speaker.

    creek,
    You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
    If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
    http://forums.americas.creative.com/...essage.id=2563
    Jason

Maybe you are looking for