No stereo sound on my iPad2?

No stereo sound on my iPad2

Nonsense Yourself.
http://www.youtube.com/watch?v=2nAIR6qtHa8
Just check it like in the video.
and btw:
http://www.mobilephone-spares.com/images/P/ipad2-speaker-module.jpg
http://desmond.imageshack.us/Himg401/scaled.php?server=401&filename=ipadstereo.j pg&res=landing

Similar Messages

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Stereo sound from all speake

Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

Stereo sound using SO Write

Hi.
I'm trying to play one tone out of my left speaker and another on my right.
I have configured my sound devise to stereo using "SO CONFIG". Then I send
the tones to "SO Write" using a 2d array.
I hear to tones, but the problem is that the same sound is coming from both
speakers.
I need to have the tones separate to each speaker.
Any help would be greatly appreciated.
TM

You may want to post this to a Data Acquisition forum, as you would probably be talking with engineers that have more experience with this sort of thing. However, I do have a bit of experience with it. If you are wanting to send out analog signals to the different speakers independently, you will need to have two different channels to write to. Does your sound card supply this capability? I assume that if a card allows stereo sound, it would have multiple channels to write to. Let us know what you find out.
J.R. Allen

Ipod doesn't produce stereo sound from iphone built-in speakers?

I've had my iphone for some time now, but just noticed that when playing music from the ipod built-in to the iphone, the music is only coming from one speaker (the one on the bottom left).
Is that normal? I would assume both speakers would be used?
I checked the settings and couldn't find a setting for "stereo sound" and did a forum search and couldn't find an answer.

fair enough i didn't think i had posted it in the right forum, so i posted it in the ipod/audio one as well....
anyway, thanks for the answer.

Change between mono- and stereo-sound

My question is if there is any way to change between mono and stereo sound on the ipod nano 3th generation...?
Thanks for help!

Are you not getting stereo? What are you listening with - maybe there's a plug problem...
Does it sound like stereo from iTunes?

So far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center sp

so far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center speaker started to play

Flash Player 11.2 is horribly insecure and no longer supported. Please update to Flash 11.6

Upconverting Stereo sound to Surround 5.1 or higher?

Does something of the sort exist for linux? I'm just having a hard time living without the "CMSS-3D" feature of the windows soundblaster drivers. They also have an alternative called DTS:Connect which includes DTS:Neo PC (which i could use) and DTS:Interactive, is there any way to utilize those functions of my card?
Creative's Crystalizer and Sound Volume Management i can live without in fact i can live without everything except equalizer and Stereo to Surround conversion, it's the latter i'm having a hard time finding on linux, do you know any solution to this problem?
Last edited by rabcor (2013-11-03 17:18:41)

That's one useful sig you've got there , Thanks!
Right now i'm just focusing on converting stereo sound into 5.1, i'll need to play a bit with the config file (since i have very rarely configured it) to test that function though so i don't know yet if i need any additional effects or distortion, but it would be nice to know about which ones are available, i quite like tweaking my sound to perfection, thats why i even have a soundblaster card to begin with.
Quoting Wikipedia on an effect that i do like to use (Crystalizer, but as i said before i don't think it's something really important to me)
Creative Labs states that the primary function of the Crystalizer is to "restore portions of the sound which were lost during compression". The "compression" that is meant here is not the digital file-size reduction achieved by digital audio data compression technologies like for example mp3. Rather, the idea is to reverse the effects of dynamic range compression, an analog technique that was and is used during the production of most 1990s and newer Audio CDs (with the exception of some classical music recordings) to make them sound louder at the same volume level setting, as it was found that subjectively louder CDs get more airplay and sell better. To achieve this loudness without introducing strong distortion, points in the signal where the volume reaches a maximum are compressed (which means in this case: reduced in volume), then the whole signal is multiplied by a factor so that the maximum volume is reached again. After this, the music as a whole is louder than it was before, but the maximum volume points (mostly transients) are not as pronounced as they were before. Since this whole process is done before the final Audio CD is recorded, its effect is equally present in uncompressed audio files created from such a CD, in lossless compressed audio made from the CD, as well as in lossy compressed audio from that same CD. Transients are typically found in percussive sounds, in plosive consonants of voice recordings, and during the first few milliseconds (the so called attack phase) of non-percussive instrument sounds. All these tend to be somewhat muffled by dynamic range compression.
To undo this effect, the Crystalizer uses a multiband compander (compressor/expander) with dynamically adjusted compression/expansion. Its main function is to detect transients and to increase their relative volume level. As a consequence of enabling the Crystalizer, the signal is altered, and whether the result improves upon the input audio is purely a matter of perception and can depend on the type of audio being played.
Last edited by rabcor (2013-10-29 21:37:47)

No stereo sound from I/O

Hey all! I have an Audigy 2 ZS Platinum Pro card, and for some reason I cannot get any stereo sound (only mono) from the I/O hub, both through the headphone out, as well as through the headphone out on a MIDI controller plugged into the hub via firewire.
5. Surround Sound works in all 5 speakers connected through the analog miniplugs on the card, and stereo sound works through the headphones when they are plugged directly into the speakers via a headphone out there.
Any suggestions as to how to get stereo sound to work from the I/O hub?Message Edited by freechus9 on 07-30-200707:00 PM

anyone?

Premiere 7 - stereo sound exports without one audio channel

Hi there.
I have a strange problem with Adobe Premiere 7.0.
Every time I export a wideo it looses one audio channel - the right one. I have no idea why.
I have a stereo audio file in my Timeline and it plays in stereo during editing.
I choose stereo sound for export, try different codecs and formats but nothing helps. After rendering the movie lacks the right audio channel.
I've double-checked the source audio file in GoldWave - it does have the sound in both channels.
Then I've double-checked the audio from the rendered movie - no right channel.
What might be the source of this problem?
Thank you for you help.
Best regards,
Szymon.

Thank you for your answer A.T.
The screens were from the GoldWave program (similar to Audacity). I've checked the original and rendered versions in Adobre Premiere. The rendered one does not have audio channel.
Source audio: wav, 24 bit PCM, 2 channels, 44100 Hz (but it happens with every audio I've tried).
Project Settings:
HDTV 720p, 25 fps
audio 48000 Hz
Export settings:
MPEG2 PAL 720p 25 fps MainConcept MPEG Video codec
Audio MPEG, MainConcept MPEG Audio codec, MPEG-1, Layer II Audio, Stereo mode, 16 bit, 48 Hz, 384 kbps bitrate
Hardware I'm working on
Lenovo Y550
OS - Windows 7 32 bit
Intel T6600 2,20 Ghz CPU
4GB of RAM
Realtek High Definition Audio
Codecs installed:
CamStudio Lossless Codes v.1.5
K-Lite Codec Pack 9.4.0
Xvix MPEG 4 video Codec
ffdshow audio decoder
Haali Media Splitter

Strange Line In problem with my X-Fi Elite Pro. Stereo sound comes and goes

I have an X-Fi Elite Pro with latest drivers installed. Everything works fine, except for the Line In port in Entertainment mode. I have an AverMedia TV/FM card and its audio output (stereo) is plugged in my X-Fi's Line In/Mic In (PCI). The problem is that I get sound only from the right channel but not from the left one, so the sound comes out in mono. From time to time, I get to hear in stereo (both channels) but it seems a random event. This input works just fine in Game and Creation modes btw.
Stereo sound from this particular input comes and goes in random order and sometimes I get about 50% on the left and 00% on the right channel. Sometimes, left channel volume fades in and out slowly. I already did some troubleshooting such as set Line in/Mic In/Digital In to "Line In/Mic In", speaker diagnostics, checked it in Game & Creation modes, turned to default values and so on but I still get this problem.
Seems pretty wired. A ghost in the machine! Creative products never seize to amaze us!

Soo...your're calling me stupid? Well, perhaps your right, but then again, I might have a point!
Read my post again.
If you still think it's too low with SVM enabled and everything is turned up...then I'm affraid you're out of luck and might consider buying another speaker set, if it's a major issue to you.

How to Play Stereo sound with the MIDI API

Hi!
I wanna know how can I make and application like the FL Studio's Piano Roll using the java sound midi API.
How can I convert this MIDI sequence to a stereo sound.
Thank's a lot for your answers

http://java.sun.com/j2se/1.5.0/docs/guide/sound/programmer_guide/contents.html
http://java.sun.com/products/java-media/sound/index.jsp
http://java.sun.com/products/java-media/sound/list.html
lutha

No Alert sounds on my iPad2 although ringing and iPod music work?

No Alert sounds on my iPad2 although ringing tone and iPod music work?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Left and right channels of stereo sound coming only from left spea

The title says it all. I can't figure out what's wrong. I checked all the settings I can think of, but nothing seems out of place. It's not the right channel cutting out, but both channels coming from the left speaker (I used the speaker test feature to confirm this). This just happened out of nowhere when I booted up my pc. Any idea what's wrong?
*Oh, and this is an Audigy 2 (plain version).Message Edited by Geise on 2-3-2005 : PM

Did you ever fix this problem? I have the exact same thing happening to my sound.
All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

Imac mid june 2011 ..connected toslink to optical to my hometheatre and yest io only get stereo sound..audio midi setup 5.1 is greyed out ? help ?new to mac

guys after a long time...i finally shifted to mac ...a long time windows user...so far the experience is been good..
ok here is my first problem with this setup
in india its a pain to get a toslink to mini adapter ...finally i found one and connected the mini end to headphone jack behind my imac...
(imac 21.5 mid june 2011) and optical end to my hometheatre ...
in audio midi setup the multichannel option is set to stereo 2ch 16 bit..
perian is installed and set to use dolby prologic..
i only get stereo sound from itunes,vlc or movist or even xbmc and boxee...tried them all configured the audio to use 5.1 but no luck,
questions
why is 5.1 greyed out ?in audio midi setup ?
i am using my mac to create multimedia content and knowing how the sounds created will be heard helps me a lot..
i have invested a lot (3 years savings in this mac) and i wouyld very much appreciate all your help..
i also purchased a griffin hdmi port which connects to my tv but the audio is still stereo..
finally got a toslink http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-TOSLINK-mini-Toslink/dp/B00006LV F3 this one ...still only stereo...
any help would be greatly appreciated .....

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

No stereo sound on my iPad2?

Similar Messages

Maybe you are looking for