No streaming file in exchange 2007

Why is there no streaming file (.stm) in Exchange 2007?Regards, Kundan

On Thu, 17 Feb 2011 05:18:50 +0000, kundan81 wrote:
>Why is there no streaming file (.stm) in Exchange 2007?
Because there isn't. Managing two files instead of just one, and doing
MAPI property promotions (both partial and full) didn't lend itself to
decreasing the number quantity of I/O necessary to scale the servers
to handle larger numbers of mailboxes.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP
and PSS was probably tired of people deleting the .stm accidently. :P

Similar Messages

Can't Save Files To Exchange 2007 Network

After upgrading to 10.6 months ago I have lost the ability to revise and save changes to a file residing on an Exchange 2007 network. The issue below happens to the two of us using Macs in the company.
The file (XLS, DOC, PPT, etc) on the network can be opened and modified on my Mac just fine. Then when we try to save the following error message is returned "Microsoft Excel cannot access the file [Path]:[File Name]. There are several possible reasons: The file name or path does not exist. The file you're trying to open is being used by another program. Close the document in the other program, and try again. The name of the workbook you're trying to save is the same as the name of another document that is read-only. Try saving the workbook with a different name."
None of the situations above are occurring. The same issue happens to my Mac co-worker and only began to occur for both of us when we upgraded to OSX 10.6. We've not been able to find a fix all this time but figured it would get addressed in 10.6.1 but now that we are on 10.6.2 and the problem continues it has become more than irritating. For now the only thing we can do is save the file to our desktop, modify it, save it, close it, then copy the local file to our network. During this time of course other users might have opened the same file and made changes ... changes that will be lost when we paste our revised file over theirs.
All other Mac <-> Exchange functions are fine ... can see files on the network, copy/paste files, move files, rename files ...
We are using 10.6.2 running on a MacBook Pro on an Exchange 2007 network. If it matters we are using Office 2004 for Mac V 11.5.5.
Thanks for taking the time to share your ideas.

You’re correct. I used this naming, because I currently can’t lookup the correct version. But I believe it’s a Windows Small Business Server 2003. Since this problem seems to be kind of widespread it may not even be that important since it seems to be a SMB/10.6 rights problem.

Error: The specified mailbox database [Mailbox Database Name] does not exist, when you try to export mailbox in Exchange 2007

[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support

How to get pst from Exchange 2007 server

Hi,
How to get pst from exchange server 2007 & 2010.
Regards
Anil

Hi,
Do you want to export mailboxes to a .pst file in Exchange 2007 and Exchange 2010?
If so, to export mailbox to a .pst file in Exchange 2007, we can use the Export-Mailbox cmdlet. You can refer to the following article.
How to Export Mailbox Data
http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx
To export mailbox to a .pst file in Exchange 2010, we can use the New-MailboxExportRequest cmdlet. For more details about this command, please see the article below.
Create a Mailbox Export Request
http://technet.microsoft.com/en-gb/library/ff459227(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Remove various accepted domains (exchange 2007) from a list file via powershell

hello!
i'm a newbie with powershell and i'm trying to find if is it possible to remove a lot of exchange 2007 accepted domains from a csv file using powershell.
I want to delete accepted domains contained in a csv, it has only domains name and powershell requires the name , that is different from the domain.
example of accepted domain in my organization:
Name DomainName DomainType Default
Domain0001
domain1.com Authoritative False
Domain0002 hello1.com
Authoritative False
I've only a csv with domains name:
domain.csv:
Domain
domain1.com
hello1.com
Deleting an accepted domain via powershell requires the name so I need to extract first the name of , i've tried with this command and it works:
Get-AcceptedDomain | Where{$_.DomainName -eq 'domain1.com'}
This works only for 1 domain, I've a lot of domains to delete so it's inviable
Now, i'm trying to launch this command without success:
import-csv domain.csv | foreach {Get-AcceptedDomain | Where{$_.DomainName -eq '$_.Domain'}}
Probably there is a syntax error, or maybe I just can't do it.
Any help?
Many thanks in advance!!

Don't know what to tell you, then. If I create a test file with that data, the Import-CSV works for me:
Domain
3414257440.domain.com
domain1.domain.com
'@ | set-content c:\testfiles\domain.csv
$DomainNames =
Import-CSV 'c:\testfiles\domain.csv' |
Select -ExpandProperty Domain
$DomainNames
3414257440.domain.com
domain1.domain.com
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Exchange 2007 - Corrupted disk with lof files

I have
Exchange 2007, where the logs are stored on the fiber chanel storage. The storage
has been damaged and I don't have access to the logs. When I
try to mount database I get the message ""unable to mount database. (hr=0x80004005,ec=-1023)". How to mount
Exchange storage seting logs to difrent location?

Hi ,
I agree with Gulab Prasad .
First of all Just run the below mentioned command for the affected database to check the database is in clean shutdown or else in a dirty shutdown state.
eseutil /mh "path of the edb file "
If it is in a clean shutdown then you can mount the database .Before that we need to change the storage log file location to different path by using the below mentioned
command then only new log files will get generated on the new location after the database is mounted.
Move-StorageGroupPath -Identity "MyStorageGroup" -LogFolderPath "D:\MyNewLogFolder"
In case if it in the dirty shutdown state then definitely there would be some logs required to mount the database .In case if you have those logs then you can do an
soft recovery to get back the database to the clean shutdown state and then mount the database.
In case if you don't have those logs , then as gulab prasad said we do have two options
1.Hard repair
eseutil /p "path of the affected database"
On the above process there would be some possibilities for the data loss.
2.Second option would be restore the database file and its respective log files from last successful backup.
As an additional info to avoid the downtime you can have the dial tone database .Then by using the RSG
in exchange 2007 we cannot restore the mailboxes data's to the original mailboxes.
Thanks & Regards S.Nithyanandham

Exchange 2007 cannot export pst files via its powershell

Hi,
I am trying to export pst files from Exchange server 2007.
This script used to work perfectly.
Export-Mailbox -Identity paddy -PSTFolderpath C:\pst\
But now I am getting an error message saying this
Export-Mailbox : The specified mailbox database "SRV03\First Storage Group\Mail
box Database" does not exist.
At line:1 char:15
+ Export-Mailbox <<<< -identity paddy -PSTFolderPath C:\pst\
MoveType                         : ExportToPST
MoveStage                        : Initialization
StartTime                        : 01/01/0001 12:00:00 AM
EndTime                          : 01/01/0001 12:00:00 AM
StatusCode                       : -2147467259
StatusMessage                    : The specified mailbox database "SRV03\First
                                   Storage Group\Mailbox Database" does not exi
                                   st.
ReportFile                       : C:\Program Files\Microsoft\Exchange Server\L
                                   ogging\MigrationLogs\export-Mailbox20140527-
                                   155543-8040336.xml
what would be the problem?
I checked that the account has full permission so permission would not be the issue.
Thanks

Hi,
First, please check if the mailbox database mentioned in the error message is mounted.
Besides, please check if you can export other mailbox using the Export-Mailbox cmdlet.
If all mailbox are affected, please check if you have the Exchange Server Administrator role assigned.
1. Open EMC.
2. Select the Organization Configuration node from the console tree.
3. Please check the permissions assigned in the result pane. If there is no the Exchange Server Administrator role, please add it to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2007 - User getting 404 File or directory not found

Exchange 2007 OWA 404 - File or directory not found. I have two database on the same server and this problem is only affecting one database and the user in the other database is fine. I did a test and move the user to the other database and I gave
myself full access to the user mailbox and use OWA (Change mailbox) to access other user and later login as the user itself and everything is fine. I have thousands of user, and doing this is time consuming. Anythough on this?

Hi Tony,
According to the description, I notice that you have a problem on OWA. When logon OWA with users from specific database, get error "Exchange 2007 OWA 404 - File or directory not found".
I suggest check following points.
1. Please make sure OWA Virtual Directory in IIS is available.
2. Please make sure the OWA Virtual Directory in IIS has configured Basic Authentication by default.
3. Please try to re-build OWA VD for testing. I saw someone solved this issue by re-building OWA VD.
4. Since you have tested, moving mailbox to another database can auto-fix this issue, please also try to follow Ed to solve this issue.
Thanks
Mavis Huang
TechNet Community Support

Is it possible to access the Public Folders in Exchange 2013 during a migration from Exchange 2007 to verify the files are there?

This is a migration from Exchange 2007 to Exchange 2013. We're in the middle of migrating the Public Folders. Is it possible to configure a database to point to the Exchange 2013 public folders so I can verify the data before the final cut?
If so what are the steps to do that? Thanks in advance.

To my knowledge no. It's an all or nothing thing with public folders.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Exchange 2007 Restore

Hello Everybody,
I am trying to restore Exchange 2007 database. I tried to do the soft recovery since my database was in the dirty shutdown and it ran very well since I had all the required logs but still
it is in dirty shut down. Please check below
C:\>eseutil /r E02 /l "i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage" /s "i:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Stor
age" /d "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Storage\Man
agers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating RECOVERY mode...
Logfile base name: E02
Log files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
System files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
Database Directory: h:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage\Managers Database.edb
Performing soft recovery...
Restore Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
Operation completed successfully in 2.343 seconds.
C:\>eseutil /mh "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Sto
rage\Managers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers S
torage\Managers Database.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:02/21/2012 15:01:30 Rand:683474569 Computer:
cbDbPage: 8192
dbtime: 401104910 (0x17e8600e)
State: Dirty Shutdown
Log Required: 355061-355072 (0x56af5-0x56b00)
Log Committed: 0-355073 (0x0-0x56b01)
Streaming File: No
Shadowed: Yes
Last Objid: 39159
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 0
Repair Date: 00/00/1900 00:00:00
Old Repair Count: 0
Last Consistent: (0x5432B,74E,DD) 01/20/2015 18:23:22
Last Attach: (0x5432D,9,86) 01/20/2015 18:27:32
Last Detach: (0x0,0,0) 00/00/1900 00:00:00
Dbid: 1
Log Signature: Create time:02/21/2012 15:01:29 Rand:683467044 Computer:
OS Version: (5.2.3790 SP 2)
Previous Full Backup:
Log Gen: 354267-354281 (0x567db-0x567e9) - OSSnapshot
Mark: (0x567EA,8,16)
http://www.arabitpro.com

Yes I have read that and tried but no luck. Check the below command its without .edb
C:\>eseutil /r E02 /l "i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage" /s "i:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Stor
age" /d "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Storage\Man
agers"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating RECOVERY mode...
Logfile base name: E02
Log files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
System files: i:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage
Database Directory: h:\Program Files\Microsoft\Exchange Server\Mailbox\Manage
rs Storage\Managers
Performing soft recovery...
Restore Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
Operation completed successfully in 3.406 seconds.
C:\>eseutil /mh "h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers Sto
rage\Managers Database.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 08.01
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: h:\Program Files\Microsoft\Exchange Server\Mailbox\Managers S
torage\Managers Database.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:02/21/2012 15:01:30 Rand:683474569 Computer:
cbDbPage: 8192
dbtime: 401104910 (0x17e8600e)
State: Dirty Shutdown
Log Required: 355061-355072 (0x56af5-0x56b00)
Log Committed: 0-355073 (0x0-0x56b01)
Streaming File: No
Shadowed: Yes
Last Objid: 39159
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 0
Repair Date: 00/00/1900 00:00:00
Old Repair Count: 0
Last Consistent: (0x5432B,74E,DD) 01/20/2015 18:23:22
Last Attach: (0x5432D,9,86) 01/20/2015 18:27:32
Last Detach: (0x0,0,0) 00/00/1900 00:00:00
Dbid: 1
Log Signature: Create time:02/21/2012 15:01:29 Rand:683467044 Computer:
OS Version: (5.2.3790 SP 2)
Previous Full Backup:
Log Gen: 354267-354281 (0x567db-0x567e9) - OSSnapshot
Mark: (0x567EA,8,16)
Mark: 02/08/2015 00:29:06
Previous Incremental Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Copy Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Differential Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Shadow copy backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
cpgUpgrade55Format: 0
cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
ECC Fix Success Count: none
Old ECC Fix Success Count: none
ECC Fix Error Count: none
Old ECC Fix Error Count: none
Bad Checksum Error Count: none
Old bad Checksum Error Count: none
Operation completed successfully in 0.985 seconds.
http://www.arabitpro.com

Uppgrading Exchange 2007 from sp1 to sp3 on small business server 2008 sp1

Hello everyone
I know this topic has been discused many time in this froum. but i have to ask it again in my exact situation.
I have a realy unstable and unsafe server which i am planing to migrate all the apps and services to some virtual servers soon.
first migrating is Exchange. i have Exchange 2007 sp1 on my server sbs 2008. i have my DC,AD, dns, DHCP, File, etc on the same server as well . So that is way it is scary for me (as i am not really experienced) to even upgrade one service pack.
Now, i want to know if anyone did it before. What should i expect during upgrading or after that? so i can be ready for that?
which kind of backup can save me if somethings happens to my Exchange? is there any way to install the new Exchange 2007 and sp3 rollup 10 and then migrate all databases and mailboxes to that new server? if yes, how to do that?
Thanks
Nima

Hi Nima,
Ok, I know your concern. Please make sure you have read the above KB I provided before installing SP3 for Exchange 2007. What's more, you need to make sure you right mouse click and run as admin to install it.
Moreover, here is a thread about migrating Exchange 2007 SP3 to Exchange 2013 for your reference.
Migrate SBS 2008 R2 running Exchange 2007 to Windows Server 2012 Exchange 2013
http://social.technet.microsoft.com/Forums/en-US/4c9b96c2-fd5e-4fbe-8b3a-fb5b3ab29da8/migrate-sbs-2008-r2-running-exchange-2007-to-windows-server-2012-exchange-2013?forum=smallbusinessserver
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Help With Migration From Exchange 2007 To Exchange 2013

We have an Exchange 2007 Server with Service Pack 3 and Rollup 12 applied.
I installed a new Exchange 2013 Server and then immediately applied CU3.
I am following this Technet article:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
The only deviation from the instruction I have had to do is in Part 2, section 4 “Configure offline address book (OAB)”.
Instead of entering:
Get-MailboxDatabase | Set-MailboxDatabase -OfflineAddressBook "\Default Offline Address Book (Ex2013)"
I had to enter:
Get-MailboxDatabase | Set-MailboxDatabase -OfflineAddressBook "\Default Offline Address Book (Ex2012)"
I believe this is due to the fact that the writer installed from an Exchange 2013 CU1 disk and I only had Exchange 2013.
Also when I tried to run:
Move-OfflineAddressBook -Identity "Default Offline Address Book" -Server SRV-EX2013
I get the following error:
Move-OfflineAddressBook : Failed to create the 'ExchangeOAB' folder on the target server 'SRV-EX2013'. Two possible reasons for the failure are that the System Attendant Service is not running or you do not have permission to perform
this operation. Error message : 'Catastrophic failure (Exception from RESULT: 0x8000FFFF (E_UNEXPECTED))'.At line:1 char:24+ Move-OfflineAddressBook <<<<
-Identity "Default Offline Address Book" -Server SRV-ex2013+ CategoryInfo
: InvalidResult: (Default Offline Address Book:OfflineAddressBookIdParameter) [Move-OfflineAddressBook], LocalizedException
+ FullyQualifiedErrorId : 9250969C,Microsoft.Exchange.Management.SystemConfigurationTasks.MoveOfflineAddressBook
However when I looked at the address books in EAC I could see that “Default Offline Address Book (Ex2012)” was the default and that it contained a copy of the Global Address List. So I did nothing else about it.
I am now at Part 3, section 7 “Move Mailboxes” and it keeps failing.
I am using the EAC so that I at least see the error as using the powershell brings back no results.
Anyway it Syncs the 18 items in the mailbox then fails with:
Data migrated: 936.7 KB ‎(959,145 bytes)‎
Migration rate: 0 B ‎(0 bytes)‎
Error: MigrationPermanentException: Error: An error occurred while updating a user object after the move operation. --> Unable to generate the e-mail address. Unable to load address module ‎'C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\address\SMTP\AMD64\inproxy.dll‎'
for address type ‎'SMTP‎'. Additional message: ‎'Access is denied‎'.
Help??
Tony

Hi,
You can't configure Exchange 2013 to generate other OAB versions, and the OAB generation occurs on the Mailbox server on which the organization mailbox resides.Therefore, to move OAB generation in Exchange 2013, you must move the organization mailbox. You
can only move the OAB generation to another Exchange 2013 mailbox database. You can’t move OAB generation to a previous version of Exchange.
And please refer to the following articles :
Moving OABs between Exchange versions
If you want to upgrade from exchange 2007 to exchange 2013,I recommend you refer to the following article:
Upgrade from Exchange 2007 to Exchange 2013
Exchange version
Exchange organization coexistence
Exchange 2007
Supported with the following versions of Exchange:
Update Rollup 10 for Exchange        2007 Service Pack 3 (SP3) on all Exchange 2007 servers in the
organization, including Edge Transport servers.
Exchange 2013 Cumulative        Update 2 (CU2) or later on all Exchange 2013 servers in the
organization.
Install Exchange 2013 in an Existing Exchange 2007 Organization
You can install a Microsoft Exchange Server 2013 server into an existing Exchange Server 2007 organization, and then move the Exchange resources, such as mailboxes, public folders, and connectors, to Exchange 2013. However, you can't perform an in-place
upgrade from Exchange 2007 to Exchange 2013.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Concurrent mailbox moves from Exchange 2007 to 2013

We are in the process of migrating from Exchange 2007 to Exchange 2013. We have about 200 mailboxes and we want to move them in groups of 40-50 at a time. I am trying to get more then 1 mailbox to actually sync to the new database at once.
I start the batch with 49 mailboxes but only 1 mailbox is showing any progress when I go to details. They all have a status of "syncing" but only one has any "items synced".
I have run multiple articles about increasing concurrent migrations from 2007 to 2010 and 2010 to 2013 and they all mention going to MsExchangeMailboxReplication.exe.config on the destination server and setting the “MaxActiveMovesPerTargetMDB" value
to something larger. By default 2013 has it set to 20 would should be more than enough for me. However despite this setting I still only see 1 mailbox syncing at a time.
Is there someplace I should be making a similar change on the 2007 box? I can't find a file with that name so I am not sure if there is something to change or if it's even needed.
Why is this not working? Any help is much appreciated. Thanks!

Outlook will show the infamous login popup and users will not be able to access Exchange 2013 Public Folders.
You can check the Outlook Clients version in Exchange Management Shell with Get-LoginStatistics (ex. Outlook 2010):
Get-Logonstatistics | select-object username,clientversion | where {$_.clientversion -gt "14.0*" -AND $_.clientversion -lt "14.0.6117.5001"}
Step by Step Screencasts and Video Tutorials

Behaviour of Microsoft Transporter Suite (Notes migration to Exchange 2007)

Dear Sir,
     I have a question about configuraiton of Microsoft transporter, not sure whether it is a behaviour or it can be fixed.
Question 1:
Lotus Notes 7.04 --> Exchange 2007
Microsft Transport: Scheduler set to every 15 min.
Q1. Does it mean that Notes sync to AD User account setting only in every 15 min only ?
Q2. It seems that it will not sync Notes email mailbox message with Exchange mailbox until manual press
    'Migrate selected mailbox', may I confirm that is it a design behaviour.
Q3. After created free/busy connector (Every 60 minutes of sync), it seems that it will not sync
      user calendar until manual pressed 'Synchronize Now'.
Q4. Can Mirocosft transport suit support workstation NSF file to PST file ?
Q5. In notes environment, ACL will be used to configure boss/secretary condition which allow send as permission.
    Does it mean that all permission will be reconfigured manually? Or any Microsoft tools to work on it.
Regards,
Joe

Hello Joe,
I checked with a specialist regarding your questions and here are the responses.
I hope this helps!
Q1. Does it mean that Notes sync to AD User account setting only in every 15 min only ?
If this is referring to Direcctory Synchoronization, then yes, it will synch any updates every 15 minutes. However, there is no reason to do a dirsync that often.
Q2. It seems that it will not sync Notes email mailbox message with Exchange mailbox until manual press
    'Migrate selected mailbox', may I confirm that is it a design behaviour.
This one seems to refer to migration. If you are wanting to migrate the mailboxes and email, you would have to manually migrate each user. In other words, this is not an automated process. So yes, this is by design
Q3. After created free/busy connector (Every 60 minutes of sync), it seems that it will not sync
user calendar until manual pressed 'Synchronize Now'.
A dirsync will have to be run after the Free/Busy Connector is created. However, it should only have to be run once. After that, when a user requests new calendar information, it will pull information for that user
Q4. Can Mirocosft transport suite support workstation NSF file to PST file ?
Yes, you will have to use the EMS to do this. It's not possible via the GUI.
Q5. In notes environment, ACL will be used to configure boss/secretary condition which allow send as permission.
    Does it mean that all permission will be reconfigured manually? Or any Microsoft tools to work on it.
There is not an automated way of doing this.
Kevin Ca - MSFT

Outlook 2013 randomly loses connection to Exchange 2007 server

Hello everyone,
I have received complaints from some of our users over the past couple of months about them not receiving mails or about sending mails which do not get delivered. A little bit of investigation into the matter showed me that Outlook 2013 had lost its connection
to the Exchange server. (Which is Exchange 2007 SP3 running on Windows Server 2008 / SBS2008, in case it matters.)
Which is bad enough in itself - none of our users running Outlook 2007 and 2010 had that problem - but it also does so in a rather inconspicuous manner, so the users did not notice. Closing and restarting Outlook helped every single time, but the users did
not notice when this happened, and telling them to just restart Outlook every hour or so does not seem like an overloy practical idea.
All of the clients encountering the problem are running Outlook 2013 on Windows 8/8.1 Pro. We do not have any clients running older versions of Outlook on Windows 8, so I cannot tell for sure if this problem originates in the OS or if it is an Outlook problem.
The first couple of times I encountered the problem, it was on laptops, so I suspected some power management issue initially. I made sure Outlook connected to the server via HTTPS, which it already did. Then I did not hear of the problem for about two months,
but recently, two of our users have run into the problem again, and while these were still Windows 8.1 machines, running, of course, Outlook 2013, they are plain desktop computers, not laptops, and I already toned down their power management settings, so I
do not think that it has to do with the problem.
Has anybody encountered a similar problem or even - more importantly - a solution? This problem is really frustrating, because our users are very sensitive to problems with their email, and the fact that this problem only occurs randomly and - all in all
- rather rarely, makes it very hard to track down.
Thank you all very, very much for any insights you might be able to share with me!

Hi,
Please ensure that Outlook 2013 clients retain their connection with the Exchange server using HTTP:
Have the Outlook 2013 user check the settings under FILE -> Account Settings -> Account Settings -> E-mail tab -> Select the account and click Change -> More Settings -> Connection tab -> Exchange Proxy Settings -> Make sure both
"On fast networks, connect using HTTP first, then connect using TCP/IP" and "On slow networks, connect using HTTP first, then connect using TCP/IP" are selected -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

No streaming file in exchange 2007

Similar Messages

Maybe you are looking for