No such file or directory
Hi all
Having opened my iBook g4, it immediately goes to a black page showing the following:
/etc/master.passwrd: No such password or directory.
Any idea what I need to do to get the laptop back up and running normally??
Hello,
Try using the restore disk supplied with the iBook, to boot into the disk utilities, try repairing the disk or try repairing the disk permissions.
Similar Messages
-
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio RamosReinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
Getting `No such file or directory` error while trying to open bdb database
I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
I am making use of Berkeley DB 4.7.25 for testing out these applications.
The four application names are as follows:
Writer 1
Writer 2
Reader 1
Reader 2
The application description is as follows:
‘*Writer 1*’ owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, ‘*Writer 1*’ will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well – 8 separate environments and so on.
Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
Writer 2 and Reader 2 processes share the environments created by Writer 2
My DB_CONFIG file is configured as follows
set_cachesize 0 104857600 1 # 100 MB
set_lg_bsize 2097152 # 2 MB
set_data_dir ../../vol1/data/
set_lg_dir ../../vol31/logs/SUBID/
set_lk_max_locks 1500
set_lk_max_lockers 1500
set_lk_max_objects 1500
set_flags db_auto_commit
set_tx_max 200
mutex_set_increment 7500
Has anyone come across this problem before or is it something to do with the configuration?Hi Michael,
I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
) following parameters are passed to db->open function call:
DB->open(DB *db,
DB_TXN *txnid, => NULL
const char *file, => file name (absolute DB file path)
const char *database, => NULL
DBTYPE type, => DB_HASH
u_int32_t flags, => DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
int mode); => 0
Also, DB_DUP flag is set.
As you have rightly pointed out, `No such file or directory` is occuring during truncation.
While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
<ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
</li>
<li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 > t1)</li>
<li>After truncation, writer process closes the database and joins the environment 'Y'</li>
<li>After this any writes to database X is not visible to the reader process</li>
<li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
</ul>
Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
Thanks,
Magesh -
Getting Error in CMC - source file error. [No such file or directory]: [CrystalEnterprise.Smtp]
Dear All,
I am able to schedule the Crystal report successfully means mail gets auto triggered as we set in SCHEDULE option. But when we tried to use the notification option we get the status as FAILED. nd in details we get "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]".
But still a mail gets triggred and each and every person will get mail. but the issue is notification will not work properly and no notification mail. And the status is despayed as FAILED with "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]" this message.
Regards,
Rohan GhadiDo you have multiple job servers in your environment? Did all the Job servers configured SMTP settings?
-
"No such file or directory" errors on Time Machine backup volume
I remotely mounted the Time Machine backup volume onto another Mac and was looking around it in a Terminal window and discovered what appeared to be a funny problem. If I "cd" into some folders (but not all) and do a "ls -la" command, I get a lot of "No such file or directory" errors for all the subfolders, but all the files look fine. Yet if I go log onto the Mac that has the backup volume mounted as a local volume, these errors never appear for the exact same location. Even more weird is that if I do "ls -a" everything appears normal on both systems (no error messages anyway).
It appears to be the case that the folders that have the problem are folders that Time Machine has created as "hard links" to other folders which is something that Time Machine does and is only available as of Mac OS X 10.5 and is the secret behind how it avoids using up disk space for files that are the same in the different backups.
I moved the Time Machine disk to the second Mac and mounted the volume locally onto it (the second Mac that was showing the problems), so that now the volume is local to it instead of a remote mounted volume via AFP and the problem goes away, and if I do a remote mount on the first Mac of the Time Machine volume the problem appears on the first Mac system that was OK - so basically by switching the volume the problem switches also on who shows the "no such file or directory" errors.
Because of the way the problem occurs, ie only when the volume is remote mounted, it would appear to be an issue with AFP mounted volumes that contain these "hard links" to folders.
There is utility program written by Amit Singh, the fella who wrote the "Mac OS X Internals" book, called hfsdebug (you can get it from his website if you want - just do a web search for "Mac OS X Internals hfsdebug" if you want to find it ). If you use it to get a little bit more info on what's going on, it shows a lot of details about one of the problematic folders. Here is what things look like on the first Mac (mac1) with the Time Machine locally mounted:
mac1:xxx me$ pwd
/Volumes/MyBackups/yyy/xxx
mac1:xxx me$ ls -a
. .DS_Store D2
.. Documents D3
mac1:xxx me$ ls -lai
total 48
280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 .
282780 drwxr-xr-x 12 me staff 442 Jan 17 14:03 ..
286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 Documents
729750 drwx------ 104 me staff 7378 Jan 15 14:17 D2
728506 drwx------ 19 me staff 850 Jan 14 09:19 D3
mac1:xxx me$ hfsdebug Documents/ | head
<Catalog B-Tree node = 12589 (sector 0x18837)>
path = MyBackups:/yyy/xxx/Documents
# Catalog File Record
type = file (alias, directory hard link)
indirect folder = MyBackups:/.HFS+ Private Directory Data%000d/dir_135
file ID = 728505
flags = 0000000000100010
. File has a thread record in the catalog.
. File has hardlink chain.
reserved1 = 0 (first link ID)
mac1:xxx me$ cd Documents
mac1:xxx me$ ls -a | head
.DS_Store
.localized
.parallels-vm-directory
.promptCache
ACPI
ActivityMonitor2010-12-1710p32.txt
ActivityMonitor2010-12-179pxx.txt
mac1:Documents me$ ls -lai | head
total 17720
135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 .
280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 ..
144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
146 drwxr-xr-x 2 me staff 68 Feb 17 2009 .parallels-vm-directory
147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
148 drwxr-xr-x 2 me staff 136 Aug 28 2009 ACPI
151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
So you can see from the first few lines of the "ls -a" command, it shows some file/folders but you can't tell which yet. The next "ls -la" command shows which names are files and folders - that there are some folders (like ACPI) and some files (like A.txt and A9.txt) and all looks normal. And the "hfsdebug" info shows some details of what is really happening in the "Documents" folder, but more about that in a bit.
And here are what a "ls -a" and "ls -al" look like for the same locations on the second Mac (mac2) where the Time Machine volume is remote mounted:
mac2:xxx me$ pwd
/Volumes/MyBackups/yyy/xxx
mac2:xxx me$ ls -a
. .DS_Store D2
.. Documents D3
mac2:xxx me$ ls -lai
total 56
280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 .
282780 drwxr-xr-x 13 me staff 398 Jan 17 14:03 ..
286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 Documents
729750 drwx------ 217 me staff 7334 Jan 15 14:17 D2
728506 drwx------ 25 me staff 806 Jan 14 09:19 D3
mac2:xxx me$ cd Documents
mac2:Documents me$ ls -a | head
.DS_Store
.localized
.parallels-vm-directory
.promptCache
ACPI
ActivityMonitor2010-12-1710p32.txt
ActivityMonitor2010-12-179pxx.txt
mac2:Documents me$ ls -lai | head
ls: .parallels-vm-directory: No such file or directory
ls: ACPI: No such file or directory
... many more "ls: ddd: No such file or directory" error messages appear - there is a one-to-one
correspondence between the "ddd" folders and the "no such file or directory" error messages
total 17912
728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 .
280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 ..
144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
If you look very close a hint as to what is going on is obvious - the inode for the Documents folder is 152 on the local mounted case (the first set of code above for mac1), and it's 728505 in the remote mounted case for mac2. So it appears that these "hard links" to folders have an extra level of folder that is hidden from you and that AFP fails to take into account, and that is what the "hfsdebug" shows even better as you can clearly see the REAL location of the Documents folder is in something called "/.HFS+ Private Directory Data%000d/dir_135" that is not even visible to the shell. And if you look closely in the remote mac2 case, when I did the "cd Documents" I don't go into the inode 135, but into the inode 728505 (look close at the "." entry for the "ls -la" commands on both mac1 and mac2) which is the REAL problem, but have no idea how to get AFP to follow the extra level of indirection.
Anyone have any ideas how to fix this so that "ls -l" commands don't generate these "no such file or folder" messages?
I am guessing that the issue is really something to do with AFP (Apple File Protocol) mounted remote volumes. The TimeMachine example is something that I used as an example that anyone could verify the problem. The real problem for me has nothing to do with Time Machine, but has to do with some hard links to folders that I created on another file system totally separate from the Time Machine volume. They exhibit the same problem as these Time Machine created folders, so am pretty sure the problem has nothing to do with how I created hard links to folders which is not doable normally without writing a super simple little 10 line program using the link() system call - do a "man 2 link" if you are curious how it works.
I'm well aware of the issues and the conditions when they can and can't be used and the potential hazards. I have an issue in which they are the best way to solve a problem. And after the problem was solved, is when I noticed this issue that appears to be a by-product of using them.
Do not try these hard links to folders on your own without knowing what they're for and how to use them and not use them. They can cause real problems if not used correctly. So if you decide to try them out and you loose some files or your entire drive, don't say I didn't warn you first.
Thanks ...
-BobThe problem is Mac to Mac - the volume that I'm having the issue with is not related in any way to Time Machine or to TimeCapsule. The reference to TIme Machine is just to illustrate the problem exists outside of my own personal work with hard links to folders on HFS Extended volumes (case-sensitive in this particular case in case that matters).
I'm not too excited about the idea of snooping AFP protocol to discover anything that might be learned there.
The most significant clue that I've seen so far has to do with the inode numbers for the two folders shown in the Terminal window snippets in the original post. The local mounted case uses the inode=728505 of the problematic folder which is in turn linked to the hidden original inode of 135 via the super-secret /.HFS+... folder that you can't see unless using something like the "hfsdebug" program I mentioned.
The remote mounted case uses the inode=728505 but does not make the additional jump to the inode=135 which is where lower level folders appear to be physically stored.
Hence the behavior that is seen - the local mounted case is happy and shows what would be expected and the remote mounted case shows only files contained in the problem folder but not lower-level folders or their contents.
From my little knowledge of how these inode entries really work, I think that they are some sort of linked list chain of values, so that you have to follow the entire chain to get at what you're looking for. If the chain is broken somewhere along the line or not followed correctly, things like this can happen. I think this is a case of things not being followed correctly, as if it were a broken chain problem then the local mounted case would have problems also.
But the information for this link in the chain is there (from 728505 to the magic-135) but for some reason AFP doesn't make this extra jump.
Yesterday I heard back from Apple tech support and they have confirmed this problem and say that it is a "implementation limitation" with the AFP client. I think it's a bug, but that will have to be up to Apple to decide now that it's been reported. I just finished reporting this as a bug via the Apple Bug Reporter web site -- it's bug id 8926401 if you want to keep track it.
Thanks for the insights...
-Bob -
Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext: VNC extension running!
vncext: Listening for VNC connections on port 5901
vncext: Listening for HTTP connections on port 5801
vncext: created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul MuqeetHi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK -
Bootcache.playlist no such file or directory, slow booting 10.7.2
Hi guys, I have this problem after updating to Lion 10.7.2 :
There are many threads addressing a similar problem, but all the fixes mentioned there did not work (deleting bootcache and checking access rights) and also
my problem is different, because my mac boots, after all. The others had bootloops or got stuck while booting.
When booting in verbose mode, the message
BootCacheControl:Unable to open /var/db/BootCache.playlist: 2 No Such file or directory
appears, but the system still boots - veery slow, though (about 2 minutes)
The next time it boots, it says no bootcache can be found and it builds a new one. After that it reboots by its own, without the bootcache.playlist error message, but still slow but with no problems whatsoever.
The next boot is as the first one I described, so I my Macbook Pro Mid 2010 is looping through those problems^^
Also, the file /var/db/BootCache.playlist is definetely existent, and has the following access rights: -rw------- (600) should not be a problem, should it?
Ah, and maybe I should mention, that I am using the full disk encryption Filevault2.
I hope somebody knows what to do with this vague information!
Thanks in advance!i wish I had the answer; would love to find out, as it is happening to my husband's make as well. His doesn't always boot up though. and then he gets "disk0s2: media is not present". Spent several hours on the phone with Apple today, and got nowhere.
-
/var/db/BootCaches.playlist 2:no such file or directory appeared after Mavericks update
Hi all,
I have tried to upgrade my iMac 2009 running 10.6.8, 3.06GHZ, 4GB ram machine and hit upon a grey load up screen and nothing more after the update. I have worked back through everything I could find in these forums as the bellow:
1. Completed all of the grey screen advice from Apple bar a full wipe and rebuild, but have left this as the last resort
2. Launched again from back up and reloaded Mavericks only to get the same problem
3. Tried to launch in Safe mode and the computer quits half way through the status bar and will not launch into Safe mode
4. Corrected all disk permissions in Disk Utility
5. Checked my EFI update and am running the latest version
6. Tried resetting the NVRAM but computer will not work from the keyboard shortcuts
7. Run Verbose mode where I could see the problem with loading Bootcache which produces the following script /var/db/BootCaches.playlist 2:no such file or directory
8. Created a carbon copy backup also and am now considering a full wipe
I have updated to Mac Book Airs in the last few weeks, and after the computer auto restarts the program then moves to a new processing screen where it finalises writing script, this point never happened on my iMac and after it restarted it just hung on the grey screen with the Apple logo. It is definitely in the Bootcache problem as this is one of te last processes and matches the amount of time the computer starts working before it heads into the grey hanging screen of death. This is definitely something that mavericks script alters, moves or deletes as I have seen this problem littered across the forums as well as the in ability for Safe mode now to work.
I am back up and running 10.6.8 at current and downloading a new version of Mavericks (more fool me). It could be a drive corruption but am unsure, but the computer s working well on 10.6.8 and has done for a very long time. Has anyone solved this yet, as t s driving me crazy!!!
Any Jedi's out there, I would be most indebted to you!
M-AHi all,
Well I thought I would re-post as have found a solution.
I created a bootable USB version of Mavericks using this article here which was very informative: http://www.techrepublic.com/blog/apple-in-the-enterprise/how-to-create-a-bootabl e-usb-to-install-os-x-mavericks/
I then rebooted via it, this again caused the grey screen of death as I thought it would, from reboot to reach this screen I held the Option Button. Before I did this I took a cloned copy of the hard drive and also backed-up again to Time Machine. Have over 470GB of music, photos and films, so yes was being a little over precautious.
I then rebooted and went into recovery mode (Cmd and R) and erased my hard drive.
I then rebooted once again but booted from my Mavericks USB version now with a clean hard drive, and set-up completed as expected with no problems. Its working beautifully at current but am yet to migrate files using the migration assistant, but once I have the new Mavericks version of my machine backed-up I will complete the migration, fingers crossed!
A few days of pain, but was a good learning experience. It was more difficult than it should be to created a bootable USB, but luckily I had another mac to work on and a decent back-up drive.
Hopefully helpful to others!
M-A -
Mac Book Pro, late 2011. Purchased in a department store in Mexico.
Was running ok for several days after I purchased it.
Had some software installed and memory upgraded from 4 to 8Gb.
Suddenly at start up, got a gray screen with a spinning wheel and never boot.
Followed advise from http://support.apple.com/kb/TS2570 and performed a safe boot. (hold Shift-Command-V during startup instead of just Shift).
The boot sequence starts then stops and nothing happens. these are the last lines of the boot sequence.
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
For what little experience I have on Unix systems, it has to do with the libraries which cannot be launched...
Any ideas, solutions, suggestions are welcomed.
Cheers.
DipbajaBoot into Recovery (command-R at startup), launch Disk Utility, select your startup volume, and run Repair Permissions. Then reboot as usual.
-
On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "
Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
I am getting (No such file or directory) in xml report
Hi All
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 20-JUL-2011 11:57:05
XML/BI Publisher Version : 5.6.3
Request ID: 21777521
All Parameters: Dummy for Data Security=Y:ReportRequestID=21777518:DebugFlag=Y
Report Req ID: 21777518
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ADTCERP
Preparing parameters
null output =/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777521.out
inputfilename =/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777518.out
Data XML File:/oracle-new/ora/prod/inst/apps/ADTCTEST_adtcerp/logs/appl/conc/out/o21777518.out
Set Bursting parameters..
Temp. Directory:/oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out
[072011_115708595][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.5.0 - Production
[072011_115708597][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=21777518, user-variable:cp:language=en, user-variable:cp:responsibility=20707, user-variable.OA_MEDIA=http://adtcerp.tawteencouncil.ae:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=21777518, user-variable:cp:locale=en-US, user-variable:cp:user=TRANSSYS, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=21777521, user-variable:cp:org_id=161, user-variable:cp:reportdescription=ADTC Receipt Note to Supplier, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
/oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out/072011_115708688/Receipt_ Ack_.pdf (No such file or directory)
java.io.FileNotFoundException: /oracle-new/ora/prod/apps/apps_st/appl/admin/ADTCTEST/out/072011_115708688/Receipt_ Ack_.pdf (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:120)
at java.io.FileInputStream.<init>(FileInputStream.java:79)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:523)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.I am also this same issue... did you get this one resolved?
--Nani -
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
I am installing OIM/OAM in a cluster configuration using release 11.1.1.7.
I looked at the EDG here:
http://docs.oracle.com/cd/E28280_01/core.1111/e12035/toc.htm
And its pointing me to the 11.1.1.5 version
http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm
So that is the guide I am following.
I am at this step:
18.1.5.2 Integrating Oracle Access Manager with Oracle Identity Manager by Using idmConfigTool
http://docs.oracle.com/cd/E21764_01/core.1111/e12035/wiring.htm#sthref356
When I run the config tool I get SEVERE messages like this one:
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Any suggestions on how to fix this ?
Please note that I can see jps-config.xml under the domain configuration in the fmwconfig directory.
Here is the complete output
Enter sso access gate password :
Enter sso keystore jks password :
Enter sso global passphrase :
Enter mds db schema password :
Enter idstore admin password :
Enter admin server user password :
********* Seeding OAM Passwds in OIM *********
Completed loading user inputs for - CSF Config
Completed loading user inputs for - Dogwood Admin WLS
Connecting to t3://admin.mycompany.com:7001
Connection to domain runtime mbean server established
Seeding credential :SSOAccessKey
Seeding credential :SSOGlobalPP
Seeding credential :SSOKeystoreKey
********* Activating OAM Notifications *********
Completed loading user inputs for - MDS DB Config
Jun 6, 2013 1:46:05 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:06 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Initialized MDS resources
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:06 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:06 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:07 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Upload to DB completed
Releasing all resources
Notifications activated.
********* Seeding OAM Config in OIM *********
Completed loading user inputs for - OAM Access Config
Validated input values
Initialized MDS resources
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:08 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Download from DB completed
Releasing all resources
Updated /oracle/product/fmw/Oracle_IAM/server/oamMetadata/db/oim-config.xml
Initialized MDS resources
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
Jun 6, 2013 1:46:08 PM oracle.security.jps.internal.config.xml.XmlConfigurationFactory initDefaultConfiguration
SEVERE: java.io.FileNotFoundException: ./config/jps-config.xml (No such file or directory)
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: Auditing is disabled for component MDS.
Jun 6, 2013 1:46:08 PM oracle.mds
NOTIFICATION: transfer operation started.
Jun 6, 2013 1:46:09 PM oracle.mds
NOTIFICATION: transfer is completed. Total number of documents successfully processed : 1, total number of documents failed : 0.
Upload to DB completed
Releasing all resources
OAM configuration seeded. Please restart oim server.
********* Configuring Authenticators in OIM WLS *********
Completed loading user inputs for - LDAP connection info
Connecting to t3://admin.mycompany.com:7001
Connection to domain runtime mbean server established
Starting edit session
Edit session started
Connected to security realm.
Validating provider configuration
Validated desired authentication providers
OAM Asserter already exists in the security realm
OAMIDAsserter is already configured to support 11g webgate
OIM Signature Authenticator already exists in the security realm
A type of LDAP Authenticator already exists in the security realm. Please create authenticator manually if different LDAP provider is required.
Control flags for authenticators set sucessfully
Reordering of authenticators done sucessfully
Saving the transaction
Transaction saved
Activating the changes
Changes Activated. Edit session ended.
Connection closed sucessfully
The tool has completed its operation. Details have been logged to automation.logi found this task :
JDev 11.1.1.1.0 + ADF+ BC4J application on Tomcat6 -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
The .keystore file now cannot be found (No such file or directory)
hi,
so, I'm trying to sign a JAR file connected to an applet.
I got to creating the keystore and had a "where do you want to store it? and what do you want to call it?" messages.
I saved it as '.keystore' and was warned by the system that files beginning with '.' are invisible.
I clicked ok (thinking the compiler should be able to 'see' it) and now whenever I try to sign anything the Terminal tells me:
jarsigner error: java.lang.RuntimeException: keystore load: /Users/spikenigma/.keystore (No such file or directory)
It doesn't matter how many other keystores I create, it looks for it in said directory and throws up an error.
I've tried everything
HELPOk, I'll be as specific as possible and maybe you can tell where I am going wrong. I am on a Mac.
1)
I have a JAR file called csvjdbc.jar . It is a driver that enables offline SQL operations of sorts on tabular data.
It works perfectly when loaded in the classpath both dynamically and at runtime.
The contents of it's manifest file are, as expected:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.1
Created-By: 1.6.0_22-b04 (Sun Microsystems Inc.)
2)
A test of csvjdbc.jar to check if it is already signed returns that it is not, as expected:
(input)
jarsigner -verify csvjdbc.jar
(input)
(output from terminal)
jar is unsigned. (signatures missing or not parsable)
(output from terminal)
3)
I want to sign the jar file so that I can load said JAR file in an applet I have not yet created.
4)
My steps are:
(navigate to the folder via the terminal)
cd desktop
cd progamming
cd java
etc….
(navigate to the folder via the terminal)
(try to sign the jar)
jarsigner csvjdbc.jar spikenigma
(try to sign the jar)
(response from terminal)
Enter Passphrase for keystore:
(response from terminal)
(entered passphrase)
************** (censored)
(entered passphrase)
(response from terminal as previously mentioned)
/Users/spikenigma/.keystore (No such file or directory)
(response from terminal as previously mentioned)
(Ok, let's create another keystore in a different location)
keytool -genkey -alias signFiles -keystore thekeystore
(Ok, let's create another keystore in a different location)
(answer standard questions)
Enter keystore password:
Re-enter new password:
What is your first and last name?
What is the name of your organizational unit?
What is the name of your organization?
What is the name of your City or Locality?
What is the name of your State or Province?
What is the two-letter country code for this unit?
(answer standard questions)
(so, we try signing again)
jarsigner csvjdbc.jar spikenigma
(so, we try signing again)
(enter the passphrase)
Enter Passphrase for keystore:
(enter the passphrase)
(response from terminal as previously mentioned)
jarsigner error: java.lang.RuntimeException: keystore load: /Users/spikenigma/.keystore (No such file or directory)
(response from terminal as previously mentioned) -
Hard Drive Error after Erasing - "No Such File or Directory"
I have a Western Digital My Passport 400GB external HD (bought in April 09). It's been working great but I had it on FAT formatting and let's just say transfers are slow. I borrowed another external drive to back everything up so I could reformat this drive to Mac OS.
Problem came after I backed up everything...I ran Disk Utility to erase the HD and format it in Mac OS Extended (journaled). It successfully erased the Hard Drive on All Zeros, taking 6 days, 5 hours, 50 minutes. Then when it tried to partition, I got the error No Such File or Directory. Here's the log:
"Preparing to zero disk : “Untitled”
Secure Erase completed successfully in 6 days, 5 hours, 50 minutes.
Preparing to erase : “Untitled”
Creating Partition Map
Disk Erase failed with the error:
No such file or directory
Erase complete."
So now the hard drive icon doesn't show up on my desktop, but is recognized in DU (without a volume however). Therefore there is no Mount Point and the drive remains unformatted. Any attempt in DU to partition or erase yields the same error message. Searched these discussions for days now without any luck. Please help!Welcome to the Apple discussions.
I'm not following your problem description .... You said that you successfully erased the hard drive. The next step would be to partition it by giving it a name (you can give it a name under partition or under the erase function) - don't leave it as 'untitled', using Mac OS extended (journaled), a partition size, and ensure under options it says Apple partition map. There are no erasures involved when you partition the drive, which is where I'm confused over your problem description. -
So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?
The reason that threadjacking is frowned on (as mentioned in the terms use which you can read by clicking the link to the right on this page) is for the most part a practical one:
By starting your own thread your problem can get individual attention, focussed on your particular set of circumstances.
By joining somebody else's thread it becomes tricky to answer more than one question at the same time, and can lead to confusion for both parties.
So if you don't mind the minor inconvenience, please start your own thread (in the correct forum) so we can get to grips with your particular problem!
Maybe you are looking for
-
How to delete the project folder in odi desinger?
Is it possible to delete the project or model in designer using startcmd.bat or any bat file? Thanks in advance.
-
Authorization check of Tcode FCH7 (reprint check) / FCHN (display check)
Hello to you all, Does any of you know of an option of extended the authorization check of Tcode FCH7 (reprint check) / FCHN (display check) using authorization object F_BKPF_BEK / F_LFA1_BEK? Regards, yoav Bernstain
-
10.4.9 shutting down on its own
In the 24 hours or so since I updated (via Software Update) my 20" iMac G5 (highly vanilla-- no pro tools, no hacks, few third party apps) from 10.4.8 to 10.4.9, I have left it to go to sleep (the machine, not me) and come back to find it shut down,
-
I want to create a button when clicked can strikethrough a text. Could I do that in LiveCycle Designer?
-
I do not see where I can update the Adobe creative suite to 2014 without buying another plan.
How do I update my current creative suite to 2014?