No suitable sender agreement found !!!

Hi,
I have created a sender file adapter and associated it with sender agreement. Now Im getting the error "No suitable sender agreement found".. I have activated all the associated objects and did complete cache refresh using SXI_CACHE..
Any thoughts..
- Ramani

Hi,
Performed below steps:
1. Checked all the MI, namespaces,etc in Sender Agreement.. Sender File Adapter.
2. The Sender File Adapter is activated and associated with Sender Agreement.
3. Did Complete refresh using SXI_CACHE.
Still I can see the error message "No suitable sender agreement found" under the Comm Channel.
Thanks
Ramani

Similar Messages

No suitable sender agreement found - File / Adapter, Sender FTP

Hi SDN Friends,
Is my first time in PI with FTP / FILE ( really I'm newbie in PI - but 2 years in ABAP ).
I have configurated my communication channel with and FILE/ADAPTER on a Sender FTP...
I have Tried with 2 FTP, one in my PC, and one Public... but in both cases, it's doesn't works... monitoring my communication channel, I get the No suitable sender agreement found ERROR....
I thought... may be PI has not access to the FTP's servers, so run in SAP PI server, an ABAP program trx se38, program: RSFTP002 and with this, I could connect to the FTP... it works perfectly.
so I don't understand... what I'm doing bad?
Any Help?
regards every body!

u r welcome...2 yrs back i am newbie
when ever we make changes after an error, sometimes XI will not take the changes in cache automatically; uses old one. solution for this is complete Cache refresh.
welcome to Integration World have fun....

RWB error: no suitable sender agreement found

Hi Experts,
my scenario is File to proxy...
i am developed end to end scenario
i am using single stack i.e AAE
while checking in RWB it gives the error : no suitable sender agreement found
how to solve this error...
please help me on this..
Thanks&Regards
E.Ravi chandra reddy

Hi Ravi,
Please follow the steps in this blog if you want to send messages to an ICO using RWB
HowTo - Send Test Messages to the Adapter Engine (to an Integrated Configuration)
Hope this helps,
Mark

No suitable sender agreement error (File -- XI -- IDOC R/3)

Hi All,
I am completeing teh 'File --> XI -->IDOC to R/3' scenario.
Have manged to complete teh IR and ID config as per the various threads in SDN.
I am using FCC in the Sender File adapter (which I assume will read the file data and convert to XML data). When this channel is activated, it gives me the error 'No suitable sender agreement found'.
As per various posts in sdn, this scenaruio may not need sender agreement as XI is finally using IDOC adapter to send data to R/3.
Am I correct in assuming that ??
Could you help point any potential missing config.
For your reference:
The comm Channel used to read file data is using File adapter (marked as SENDER/NFS/FCC/Integration server)
Appreciate your feedback.
Thanks
Shirin

Hi,
chk for ALE settings....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
Step 6)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 7)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
reward points if helpful...
Prashant

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

Problem with sender agreement

Hi,
We are trying to send a file from the file system (using file channel) to XI. However we are getting the error as " No suitable sender agreement" found error in the communication channel monitoring in RWB. However the sender agreement is very much there and is activated also.
Any idea on this ?
Regards
Ganesh

Hi,
try creating your scenario with a integration directory wizard
it will make sure that everything is correct
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File Sender without Sender agreement- Possible?

Hello
It may seems bit unusual but i am having requirement in which the file sender adapter is expected to trigger the OS level command in which it gets the file from SSH server in the XI polling directory and then XI File adapter would pick up that file.
Now it has been observed that, XI File adapter doesn't execute OS level command in its poll cycle unless it creates message which means XI would expect some file (atleast a dummy file) in its polling directory.
Since this is not possible, we thought of creating the second adapter which will poll the dummy file of say 0 KB and call the OS level command which will get the files from SSH server and then the second adapter would poll the actual file.
Since second adapter would serve just as the trigger channel, its not expected to have any sender interface associated with it and hence it should poll the file without any sender agreement. can this be possible?
thanks in advance.
regards
rajeev

Hi,
Actually i tried that earlier but it didn't help.
It does executes command before or after but that only when it creates a message and it doesn't create message unless we have suitable sender agreement.
Actually i tried with dummy message interface (without actual message interface in IR) and that works but it fails in MONI and generates the error message as no suitable receiver found which i wanted to avoid.
Thanks and Regards
Rajeev Patkie

No Sender Agreement (Specific)

Dear All
I have gone through SDN forums and found a number of threads where this problem is discussed.
Most of the answers include
Re - activate ID objects : not always helpful
Delete and recreate ID objects : not possible in production environments
Cache refresh: does not solve problem most of the time.
I have very specific question regarding the problem
What exactly is the reason for a problem saying "No Sender Agreement Found"
Instead of solution let us have some inputs on the cause of this problem so that we can concentrate on the root cause for this.

Hi,
on what I understand you trigger EXTERNALLY a sender Communication Channel.
To solve your issue, for each triggering, your scheduler tool has to do a : STOP-START-<Tempo>-STOP of your sender CC.
The first STOP, it's because before to do a START, you cannot be in status "Started". So you have to stop It.
See in CC monitoring, when CC is started, you cannot select the "START" button but only the "STOP" button.
Note: I think the reson why you have your error message (sorry I have not my doc to check the exact SAP message).
The Last STOP, it's just a "security". If you do not do it and if your J2EE server have been to be restarted, then all CC which are in status "START" are started... on so the CC are run at a non-desired time. To avoid that, I suggest you to do the last STOP, for instance, with a <Tempo> of 60 / 90s after the START... It's depend of the connection to your legacy... let time to PI to pick-up the file before to do the last STOP.
I did these three steps since several years, and it works perfectly.
Regards.
Mickael

Sender agreement error

hi,
we have two XI systems connected using XI adapter. I am observing a strange behaviour in a case where a file was processed, mapping was done and finally one XI is trying to send it to other. The error being reported is about sender agreement but in the call adapter version of message, in the IE.
Error in sender agreement for party , service XXXXX , interface namespace XXXXX , interface XXXX No sender agreement found for , , , , ,
Any pointers?
Rgds,
Amol

Hi Suraj,
that is not the case. XI1 is aware of what is being done and the fact is actually this has been working fine for last 1.5 yrs but started giving this error all of a sudden.
Do you know if SLD related changes could have such kinda weird impact?
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN
here the thread owner mentions that the issue was because of some SLD issue.
R/
Amol

Sender Agreement is not Active

Hello,
I am developing a JMS to File and File to JDBC scenarios on XI service pack 9.
All the necessary objects and configuration are created and activated . When i activated them,evertying got activated but i don,t see sender agreement from the SXI_CACHE even its associated communication channel is not visible from the adapter minitor.
I can see all onjects from SXI_CACHE , only sender agreement is missing.
Any suggestions for this problem?
Best Regards,
Chandra

Chandra,
Click on the Sender Agreemt and then Click on the Sender Business Syste, with which you have associated the Sender Agrement. You should then be able to see the same if it active.
Also, if there is no sender agreement for your adapter, then the adapter in Comm Channel Monitoring would give you the error log , "No sender agreement found" . Are you getting this?
Regards
Bhavesh

Error in BPM (No receiver agreement found from sender to bpm)

Hi all
In a simple bpm scenario, I am getting a error that No receiver agreement found for sender service to bpm integration process.
What might be the reason?

your configuration should like this.
say u are doing File to File using BPM
File to BPM
then BPM to File.
so u need to create RD where sender is fileservice and receiver is BPM.
second u hav to create another RD where BPM is sender and Fileserviceis receiver.
So there should be
one Sender Ag
two RD
two ID
one RA.
Thanks
Farooq.

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
    File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
    Sender:
    - RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reciever
    communication party = space
    communicatin component = ZTEST_COMP
    Configure Reciever:
   There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
    -RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reviever:
    ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

No Sender Agreement is Found in JDBC Sender Case

Hello,
I am using a sender JDBC channel in my scenario.I am getting the error as No Sender Agreement is found for that particular channel.I checked sender agreement.Its ok.But still i am getting the same problem. I checked the sender service,sender interface and sender namespace. What else i can check if the problem still persists? can anyone help me out in this regard?
Thanks,
Prakash

Hi Prakash,
Follow the steps:
1. First try to find your sender channel in the adapter monitor at Runtime workbench. If its shown red, there are two possibilities of having error. One is with the Channel Configuration. The Second will be with the sender agreement.
If the problem belongs to second category, You have to delete your current sender agreement and create the same manually by specifying each entry properly..
This will help you..
Regards
Vinod
Help me with points.

Error: Sender agreement not found, lookup of binding via CPA-CACHE failed.

Hi,
I am doing an RFC to File Scenario in which RFC has to be triggered from CRM system. The TCP/IP connection and communication Channel are working fine. But when i trigger my RFC using the RFC destination following errors occur:
1. The SYSTEM_FALIURE exception comes on CRM side.
2. In adapter monitoring the following error comes on XI side:
Error: Sender agreement not found, lookup of binding via CPA-CACHE failed for Adapter type RFC.
I have also tried the scenario with RFC request as source message and also after J2EE cache refresh but the problem still persists. And one more thing my file adapter (In receiver communication channel) is not working means it is not started. And no message is coming in SXMB_MONI.
Could anyone please help me to resolve this issue.
Regards,
Vinay Yadav

Hi Aaron,
I had the same error and your feedback solved my problem!
Thank you sooo much!!!!
Luciana

No Objects Found error during Sender agreement in ID

I created all objects, activated in IR and refreshed Cache with SXI_Cache.
Created Scenario in ID.
During Sender agreement creation, I gave Sender Service ( Which doesn't have to be in SLD ). Then Iam trying to pick Interface from drop down. Surprisinglt I cant see any object instead it throws error "No Objects Found" .
What should I do to see the Interfaces from Design?. Any suggestion here ?
Iam doing File to File scenario with Business Service.
Thanks

S T,
from what you've said, you're using Business Services and not Business Systems.
Business Services are simpler (in the sense that you don't need to refer them in SLD and all), but the catch is that they don't have some useful stuff that Business Systems have.
One of these is that, for Business Systems, all the interfaces that are in SWCVs which belong to that BSy are automatically considered as valid interfaces for that BSy.
As for Business Services, you have to define all the interfaces that you want in the BSe, one by one. The good news is that you can use the Message Interfaces of any SWCV of Integration Repository, without having to specifically add the SWCV to the BSe (which can be a pain in the @$$ some times...).
To see and/or include message interfaces for a Business Service, just double click on it on Scenario or Objects tabs of Integration Directory.
Regards,
Henrique.

No suitable sender agreement found !!!

Similar Messages

Maybe you are looking for