No Surround sound in WoW - XFi Titanium Fatal1ty Pro

I have windows 7 64bit. and I installed the latest software from Creative. I can only get stereo sound out of this card in WoW. When I enable DDL under the encoder tab of the Audigy Control panel, I get a No Sound Driver Listing in WoW's audio tab. The card is set to gamer mode, and i can get surround out of the Creative Console when I test it out with the speaker icons. Running in compatibility mode doesn't work. Neither XP service pack 2 or 3 did anything to fix it. I have enabled Alchemy and that didn't work I have turned off EAX and disabled Alchemy, that didn't work. I bought this card for the sole reason of getting surround sound on my home theater, via SPDIF optical, when I play WoW, and it doesn't work. grr I don't have another game to try. I just want WoW to work. Please help me, I don't know what else to do.

I am going to return this card if I don't get any help. This is extremely disappointing to say the least. An expensi've card that completely sucks for one of the worlds most popular games.

Similar Messages

  • Microphone not working with XFi Titanium Fatal1ty Pro

    Lo all,
    I bought a new PC last week: OS is Vista Ultimate 64 bit, headset is Sennheiser PC350, soundcard is as per subject line to this thread. The sound is working fine - awesome in fact. But when I went to configure Ventrilo I realised that my mic was not communicating. I tried a recording but it would appear that the mic is not currently being detected. I went into the Control Panel/Sound and can see that no mic is being detected. Assuming my headset is working fine how do I tackle this? Is this a detection issue? Is this a volume/mute?
    Any and all help,
    LK.

    Anyone able to help?
    LK.
    Message Edited by Lord_Kaene on 02-02-2009 02:06 PM

  • MSI x58 PRO-E SLI+Creative X-Fi Titanium Fatal1ty Pro

    Im thinking of buying a Creative X-Fi Titanium Fatal1ty Pro for some better sound, problem is that I cant see if this is gonna fit in the top PCI-E slot because of the cooling block there.
    Does anyone know if this will fit or not?
    here is a pic of my current setup:
    http://twitpic.com/1zvxnz

     You asked if it would fit the other slot and I said it would, if the heatsink does in fact prevent you from using that slot then you can use any other available PCIe slot. A 1x PCIe card will work in any PCIe slot no matter what size the slot is.
     I took a look at the pictures shot from an angle at MSI website and it does look as if it may not fit there. I also noticed that on the 1156 MB that the same HS on them have very short fins in line with that slot, makes me wonder why the 1366 MB HS is not like that.
     I assume you don't have or can't borrow a card from family or friend to just test for fit in that slot?

  • Gigaworks S750 cables for the X-Fi Titanium Fatal1ty Pro Card?

    Hey guys,
    I got a nice Gigaworks S750 7.1 speaker system and want to use it with my new X-Fi Titanium Fatal1ty Pro card. The Fatal1ty pro has analog outputs for a 7.1 sound system, but the Gigaworks doesn't have the same layout. Can anyone help me find the cables I need to get this setup running?

    Hi,
    There are 4 Line Outs on the X-Fi Titanium Fatal1ty Pro card.
    Line Out 1 jack - Connects to the Front Left and Front Right inputs
    Line Out 2 jack - Connects to the Side Left and Side Right inputs
    Line Out 3 jack - Connects to the Front Center and Subwoofer inputs
    Line Out 4 jack - Connects to the Rear Left and Rear Right inputs
    You might want to refer to the user manual of the sound card and speakers system for more information.
    You can still utilize the suppiled 7.1 cable. Just leave out the grey connector (side speakers) and use a single 3.5mm cable to hook up both ends.

  • Question Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.

    LQuestion Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.0 Hello All,
    I need help on this.
    I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
    However, I have some problems.
    . In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
    2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
    3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
    Thank You

    AnyOne?

  • Titanium Fatal1ty Pro product numbers?

    I've discovered this, and I am honestly quite confused.
    On Creative's official store, the Titanium Fatal1ty Pro has the SKU 70SB088600002 . Looking at my own local stores, I see a very similar code (70SB088600000), where the only difference is the last digit being 0 instead of 2. That's not all though. Some retailers also have the quite different code of 30SB088600000 . That's three SKUs, apparently for the same product. Nothing indicates that either is the champion edition (the package including a front bay). Do these differ somehow?

    You can use the product page on the online store as a reference to make sure that you are not missing anything. If you are buying from an online reseller, you might want to sure they are authorised & trustworthy retailers.

  • SoundBlaster XFi Titanium Fatal1ty Popping Sounds

    Okay...obviously this isn't a new problem... I've seen tons of complaints about it. Anyhow, I've started getting popping sounds randomly, through analog and digital. Is there ANY fix for this? I was thinking it might be my wireless card (which is three slots down from the sound card, and has an external?antennae. Any ideas? I never got this on my XtremeMusic. I have:
    Intel Core 2 Duo e8400
    Geforce GTX 285
    DFI Lanparty DK P35
    Wireless N PCI Adaptor
    Xfi Titanium Fatalty PCIe
    3 Hard dri've/bluray dri've, yadayada yada...
    Latest Creative driver
    Windows 7 64
    4GB DDR2 RAM

    Try swapping PCI slots of your Wireless card. If your sound card is PCIX you can only move it to a x, x4 x8 or x6 slot. The wireless card can be moved to any other PCI slot.

  • Sound Stutters During Windows 7 Startup/Login XFi Titanium Fatality Pro

    During Windows 7 startup/login I get a weird stuttering sound when the startup sound effect plays. I have installed my X-Fi Titanium Fatality Pro card on two different PC's and get the same result. It's not a big issue but it does get annoying because it stutters throughout the whole startup/login sound effect. Has anyone else experienced this issue or resolved it's Thank you.

    KYep, im having the same. Windows 7 Professional + XFI Xtreme Music Sound distortion and lag when watching youtube clips or actions as simple as changing theme in windows 7 desktop ( it goes on with wierd distorted sound) Any help? i have tryed last 2 creative audio drivers with no help..

  • No 5.1 surround sound on X-Fi Titanium (intern

    I am trying to get my X-Fi Titanium card on a new Dell XPS 420 computer to play 5. surround sound. The setup is simple. Optical out from the sound card going into optical in of Onkyo HT-S400 receiver. First I want to make sure the couple of assumptions I have are correct:
    . SPDIF out means the digital optical connection from the optical out in the sound card.
    2. If CMSS 3D is enabled and a stereo mp3 is played on the computer, ALL 5 speakers should have sound (a replication of stereo sound but played on all 5 speakers).
    I see two devices in the Sounds icon -> Playback devices from system tray. Creative SB x-Fi speakers (This is default device and going to properties, default is stereo speakers though it can be configured to make it 5. channel but doing a test on it, the fi've sounds (LR, Center, FR, RR, RL come out of only the front two speakers) and SPDIF out (configure option is disabled and going to Properties -> Advanced it shows different 6 and 24 bit combinations of 2 channels, NO 5. channels available). I have "Gi've applications exclusi've control of this device" checked for both.
    After changing the properties to 5. on Creative SB X-Fi speakers, if I go to Creative Audio Console (blue colored app) and do a channel test, the 5 sounds again come out of only the front two speakers even though the set up says 5. channels since I changed to that in system tray).
    The only way all 5 speakers work is when I am playing a BluRay disc using PowerDVD. I had to explicitly make the SPDIF Out the default device and then select SPDIF from the Audio Setting within PowerDVD. Even then though it does produce 5. sound for the prei'vews before the movie (and once for the movie itself), the 5. gets disabled right after the FBI anti piracy warning now just before the movie begins.
    I don't see an option for SPDIF pass through in Audio Console (I think) mentioned in the forum posts. Can someone please shed some light on this? Is this a driver issue (since I don't see 5. by default on Creative SB X-Fi speakers as well as SPDIF out -> Advanced) or am I missing some other setting? . My goal is to get sound from all 5 speakers for regular mp3's/music through CMSS and true 5. digital surround sound consistently from Blu-Ray discs using PowerDVD/any other software I might try.
    Thanks for reading and I'll look forward to hearing from the helpful forum members!

    So if these aren't Dolby pro logic tracks I am a bit confused here. Also, according to your explanation: once I change the language track using the menu from atv2, how can I ever reactivate the ac3 track if it does not show up in the menu?
    Dolby Pro Logic I (passive) and II (active) audio is encoded in stereo normally as AAC tracks which do show up in the TV2 Chapter/Audio menu while I have never seen any AC3 audio track show up in the TV2 Chapter/Audio menu. As to switching between AC3 (in the DD5.1 "Auto" or "On" mode) to any of the AAC language tracks, I simply set the DD5.1 mode switch to "Off" and the currently defaulted AAC language track automatically plays and can be switched to any other available AAC language track using the TV2 Chapter/Audio menu. Turning the DD5.1 option back "on" or to the "Auto" mode re-engages AC3 audio playback on my system.
    However, I have read about "only one 5.1 track" elsewhere (can't remember where). Do you have more info on this?
    Have only tested one multi-AC3 track test file with English as the first DD5.1 language. As soon as I finish posting this, will go back and create a test file with English and French AC3 DD5.1 audio tracks reversed to see I can get the French audio to play. (Had previously tried changing the default menu and audio language settings on the TV2 device to see if that would change the AC3 DD5.1 language being played but it had no effect. If changing the AC3 track order also has no effect, will try changing the settings on the iTunes computer to see if that may control which AC3 language track is streamed to the TV2 device.

  • Issue activating DDL on XFi titanium Fatal1ty Champions

    Hello there,
    I've just bought a brand new XFi titanium Fatalty Championship.
    Everything went fine?during the installation,
    I was happy to download the latests patches from the 23rd of october right after the installation,
    I successfully activated my DDL licence over the web ...
    but?there is no? "Encoder" tab on configuration panel,
    and of course no Dolby Digital or DTS options are available in the consoles.
    I tried to uninstall everything, then I reinstalled everything, same issue.
    When I run the DDL?licence?activation program,?I have a marvellous?blue?window saying ?that my activation is ok, but there is no impact in my console or configuration panel.
    Did someone face the same issue ?May be I missed something important ?
    Thanks for your help?!
    My configuration is :
    Windows Vista 32, Service Pack installed
    Intel Dual Core 6600

    Hi there, thanks for your answer, but sadly, Dolby Digital option do not appear in audio console entertainement mode. This is my problem actually. If I understand well, this option only appear if you have activated the Dolby Digital License, and my problem is : all the things which should appear when DDL is activated are not displayed. I triple checked my DDL activation : it's ok on this side. Hope my problem is more clear now -- sorry for my porr english, it's not my nati've langage -- Regards

  • Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

    Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
    i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
    Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.

    Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
    "Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
    So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
    I have created a support ticket hoping that this and the other post above might bring about a driver update.
    Will keep testing and post any updates.

  • Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

    Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
    Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
    Is there a DVD i could download or be sent for Win 7.
    Whats the best way to proceed...
    Thanks
    red

    OK I got it!!
    I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
    Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
    what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
    Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
    what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
    thanks for any suggestions.

  • Titanium Fatal1ty Pro SPDIF game problem

    (Titanium Fatalty Pro SPDIF game problem hi all,
    sorry if this issue reported in the past i but i could not get any answer on any relati've posts, the terminology was so complicated
    i buy?a new pc with a Titanium Fatalty Pro sound card, i use Vista sp2 x64, the sound card is connected to my external amplifier with SPDIF out in order to get surround sound for my movies and my games and here is my problem
    any movies format with surround sound play perfect with out any problem any kind of movie DVD, dvix, mkv?files?etc
    but non of the games i play?use the surround system, why is that? is any?kind of special settings needed to be done? how is possible to get surround to movies and not to the games?
    thanks you all for your time ?

    ,Re: Titanium Fatalty Pro SPDIF game problem? this is really coincidence - I just posted on the very same topic 5 minutes ago.
    for games just go to the Console Entertainment mode > Encoder > Dolby Digital. Although this is not documented I believe what happens is that the sound card encodes the 6 digital channels onto Dolby Digital mode and transfers this over SPDIF. Kok-Choy actually recommend using the standard analogue cables (and he has a point as you are actually upcoding an existing game signal onto Dolby so that your digital receiver can then decode this down to 6 channels - seems a pretty useless overhead)
    for video - I am curious to know what you do - I can either get 96/24 bits on the display of my z5500 with a direct signal but the z5500 receiver then tells me that this signal is only in dolby ProLogic II (and not DD or DTS). As alternati've I use again the encoder and have to select for EACH FILM WHAT IS BEST DOLBY DIGITAL OR DTS. Pls explain what settings you use.
    thanks

  • X-Fi Titanium Fatal1ty Pro on P7800 7.1 speakers.

    Hi Everyone.
    I just?get a X-Fi Titanium Fatalty Pro (It's better late than never, right? LOL).
    I found around that X-Fi Titanium Fatalty Pro will recognize?my oldie but goodie?analog P7800 speakers.
    My question is shoul I only?need to connect the each speaker audio cable to the three Line-Out(green-Lineout6, black-Lineout3, orange-Lineout4) on the soundcard and my speaker system will?work fine? or?should I need to buy 4 new rca cables for this to get my speaker system working fine?.
    Thanks for every input guys.

    Originally Posted by Foodog
    I just removed Win8 and installed Win7 on my computer last night. Ran all updates including SP1 and installed Creative driver and apps. I still only have sound from right and left front speakers and no sound at all in MP4 video formats. Was gone for awhile and when I came home and brought computer from sleep mode there was no sound at all. Checked for muted or otherwise changed setting and there were none and still no sound at all. Opened up Console Launcher and switched mode to Audio Creation and suddenly I had sound but still only the right front and left front. Looks like Creative has managed to screw up Windows 7 along with Windows 8. Maybe if I go back to Win95 things will work.
    If you are playing from a stereo source(only two channels, right and left) then you aren't going to have playback on all of your speakers, to have that you need to tell the console launcher to replicate the stereo signal to the rest of your speakers.
    Like so
    Attached Images
    rep.jpg
    (5.0 KB, 4 views)

  • T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

    7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
    Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
    I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
    Thank you very much for answer!
    Thunderbolt (my real name is too hard for foreigners) ^^

    Please refer to my reply on your post under Windows 7.

Maybe you are looking for