No surround sound on DTT2500 with X-FI music card

Hi,
I have new x-fi music soundcard and my old Cambridge Soundworks DTT2500 System. When I set the speakermode of the x-fi to 5.1 speakers it doesn't work correctly. The speaker test for the rear speakers is only audible on the left and right speakers. I am using the spdif/digital out of the x-fi card and the spdif in on my speaker system. I tried all options on the soundcard and on the speaker system, but I still don't get a successfull test on all speakers!?When I play a DVD using the spdif out, the DD signal is identified and it works fine. When I use the analog connectors for front and rear and turn on 4/4.1 speaker mode, the front and rear speakers are also working correctly. I would like to use my surround system, also (e.g. for games). Thanks for any help!

Hi this might sound stupid, but have you set your sound card to 5.. I dont have a X-fi, so cant comment on where the option?is, but id assume it would be under some speeker settings. Regards?Pabs

Similar Messages

5.1 surround sound on s5160f with Nvidia and Realtek cards

product_name : HP Pavilion Slimline s5160f Desktop PC
operating system : Microsoft Windows Vista Home Basic 64
The HP guy told me to load this driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-69866-1&lc=en&dlc=en&cc=us&...
it didnt' work.
My audio is coming out through the HDMI cable which is from the NVIDIA card. I tried other solutions, including updating the NVIDIA drivers for similar problems. Someone suggested going though SPDIF, but VLC just has an option to use SPDIF when availble, you can't exclusively set it.
How do I get 5.1 surround sound sent through the HDMI connection? I've used VLC and the builtin Blu-Ray player software and I'm running out of ideas.

Is there a way to identify which computer outputs support 5.1 sound? It is a media center PC, but I can't find that information anywhere.

5.1 Surround Sound in VLC with OSS4

I don't seem to get 5.1 surround sound in vlc with oss4. The audio device's available in vlc are stereo and mono only even when playing 5.1 surround sound compatible media.
Is this issue still unresolved?

ok.... strap your-self in Freddie
with a surround panner, bleed-over (on to other channels) can be ugly as i have found surround panners are anything BUT precise (perhaps accurate, as you say but NOT precise). Oh don't forget that sub channel. The bus trick really helps out here with limiting and compression..blahblahblah.. Automation with panning (on the main track) and bussing (i know this sounds goof-ball) making dup tracks for different panning functions (like sweeping aircraft sound spinning around the sweat-spot spectrum) leverages standard (old-skool) automation 'thinking' rather then the (new-skool) surround panner thinking... plus i'm still waiting for a low cost HUI style mixer with REAL tactical 3d surround panning joysticks so i can truly leave the stereo world. the mouse and a surround panner is the 'lame' some times.
But, yah, i do mix in both worlds..5.1 panners and my uber-hax0r bus panners. To tell the truth, when i'm in LP7 i still have use my bus trick in conjunction with 5.1 panners. Kinda too bad however that logic (Pro and Express) don't have the kewl mono/stereo into 5.1 effects of Digital Performer... oh well... good luck all you AC-3'ers out there!.. i'm going back to work...[beep]

EntaOk, I am atuallually having troubles with my itunes music card. I accidlly scratched a letter off. i want to get my card to work. how? thank you.

Ok, I am actually having troubles with my itunes music card. I accidentally scratched off a letter. how can i get my card to work without the actual code? thank you.

Yu can try contacting iTunes. See the iTunes Cards abd Code topic of:
Apple - Support - iTunes

How do i get my surround sound to work with my laptop while using a hdmi cable for the video

I have a Sony surround sound system hooked up that works great. My X-Box 360 works with it and I can get my HP G60 to play audio files through the surround sound system with a red and white audio jack plugged into the back of my surround sound receiver, the red and white audio cord goes to a 3.5mm headphone jack that i plug into the headphone plug on the front of my computer. The problem occurs when I hook my HDMI cable into my computer and connect it to my Samsung Flat screen, the HDMI sound takes over and wont allow the sound to go through the headphone jack. My tv does not have any audio output plugs, and my suround sound reciever doesnt have an HDMI input. Is there a setting on the computer that will allow me to over ride the HDMI sound and direct the sound through the head phones? or is there an app or tool that will allow my laptop to recognize my suround sound system plugged into my laptop? I have been to best buy, walmart, radio shack and even my local car audio store to ask about this issue and everyone has a different solution, and so far none of them have worked???????? sincerley frustrated! please help!?!?!?!?!?!?!?!?

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

How to get Surround Sound to work With Itunes 7 and Stop Skipping

A common problem for surround sound with itunes 7 appears to come from Creative sound cards. The way to fix this problem is to right click on the volume icon in the taskbar and open the EAX Console. Open the CMSS 3D tab and check the box that says Enable CMSS 3D and set both CMSS and CMSS2 to 0% in the stereo focus slider. It should work. Remember to have the volume slider in itunes at 100%.
If that doesn't work then open the quicktime preferences in the controlpanel/quicktime. Then go to the audio tab, uncheck the safe mode box. Set the rate to 64 kHz and the size to 16 bit. Then set the channels to 5.1
This should all make it work, after hours of struggling i've found these successful settings and am loving it!
For those of you who have sound skipping during transitions----
Go to the preferences of Itunes and go to the Playback tab, disable the crossfading between songs and you should play skip free!!!!

bump

How to make a 5.1 Surround Sound Blu-Ray with FCP

Being disappointed that FCP only makes Blu-Ray discs with a stereo soundtrack I decided to find a way to make one with my 5.1 soundtrack. After hacking the build process by replacing the stereo AC3 file with a 5.1 version while it was still making the video file I stumbled on a very simple method of making a 5.1 Blu-Ray.
In FCP, choose Share and select Blu-Ray. Check the box that says something like "burn Blu-Ray disc". When the project is ready to transcode and burn, hit the "Send to Compressor" button. Once in compressor, right-click on the Dolby Digital 2.0 setting and select "Edit Setting" (or "Change setting", not sure which, my FCP machine somewhere else at the moment) and browse to the 5.1 Dolby Digital setting. Select it and submit the job. When done, you'll have a 5.1 Blu-Ray disc of your project.

There is no way to create a real Dolby sound unfortunately. The mac currently only supports 2 channel outputs. There are interfaces you can buy that will separate the bass and send it to the subwoofer, and fake a 5 channel sound field, but ultimately it will only run 2 sets of stereo speakers, and one mono in the middle, so it is not true surround sound.
Here's a similar thread with more information if you are interested:
How can I connect 5.1 speakers to Macbook Pro 13 bought Summer 2011
I wish there were a way to do it, I personally am a recording musician and an audiophile, and have looked for the same thing on several occasions. But unfortunately at the time, it seems as though there is not the hardware to do it.

MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
MJ

5.1 Surround Sound Altec Lansing with Macbook Pro

I am sure this question has been asked many times before, but I couldn't find an answer. I have 5.1 Dolby Digital Surround Sound Altec Lansing speakers that came with my Dell Desktop from several years ago, and I recently switched over to mac by purchasing a macbook pro. I would like to know what the best way, if any, would be to get the speakers working with my macbook.
The 5 surround sound speakers plug into the back of the subwoofer, and the subwoofer has 3 cables (I'm guessing right/left/subwoofer) that connect to the back of the desktop. Are there any adapters that would allow me to use them with my macbook pro? Is there any way to just stream whatever sound I want to those speakers? Is it even possible? Any help would be appreciated. Thanks!

Is there a way to identify which computer outputs support 5.1 sound? It is a media center PC, but I can't find that information anywhere.

Using creative surround sound speaker package with Mac - any chance?

hi - I have Creative THX 7.1 surround sound speakers. They work well with my PC and its creative soundcard. Will they work at all with an Imac? I have a sinking feeling they won't?
Electric Ray

What sort of inputs does this system have (e.g. digital optical, RCA, miniplug)? If any other than digital optical, you may need a decoder or other external sound card to use these speakers with your iMac.
Joe

Using 5.1 surround sound speaker set with my laptop

1. HP Pavilion DV6-6150EW QA944EA
2. Windows 7 Profesional 64 bit
This is my laptop.
I want to buy a set of 5.1 surround sounds speakers (most likely some cheap and popular creative inspire Inspire T6160).
My question is will they work with my laptop? Ill have to just plug cable from that speaker set into my 3.5mm jack socket on the left side of laptop (where i usually plug in headphones) and it will work?
Or this laptop dont have 5.1 sound?
I didnt found what sound card it has, all i found is that its beats audio and IDT High Definition audio codec (driver date: 2012-03-23, driver version 6.10.6395.0).
I would appreciate help sice i dont want to find out that if i buy speakers they wont work (or only 2 speakers will work).

Hey there,
I would recommend using one of these USB audio processors: http://goo.gl/5z9Gm
This is just the first one I found so do you research to see which one fits your needs the best. I looked at your laptops spec's and could not tell if you had any digital output connectors. HDMI will also transfer digital audio, it just depends on what your trying to accomplish.
Hope this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Dolby Digital Surround Sound dropping out with channel chang

Currently I have my cable box hooked up to my extrenal I/O box for my Audigy Platinum Pro ZS2 via my cable boxes SPDIF optical out to the I/O boxes optical in. With my initial set up I went to the AudioHQ and changed my Device Controls/Digital Input controls to SPDIF (Dolby Digital/DTS SPDIF-In Decode) and I had beautiful surround sound, but the only problem is that when I change the channel I lose all sound and I have to go back to the AudioHQ controls and change the Digital Input setting back to the (Default) setting and then change it back to the SPDIFDolby digital....etc, and then the sound comes back. So why is it that whenever I change the channel I lose my optical connection?and sound?and have to reset my Digital Input settings in order to get the sound back?Somebody please help...thanks. Jacob

Sry, your comment is 5 month old, but i have to ask you some thing too:
What headset do you use for the surround sound? I read EVERYWERE that headsets can just output games / music in stereo... for example the logitech g35...
Hope you can help me

Surround sound doesnt work with 7.1.1

Ever since I upgraded to 7.1.1 surround sound will not work only plays in front 2 speakers. Quick time preferences have channels set to 5.1....control panel sounds has speakers set to 5.1 ....all other applications (media player etc.) can use all speakers...its only iTunes that has the issue.
Really frustrating anyone have any ideas??
7.1.1 Windows XP

Hey Todd,
The four vis that you listed are a part of the traditional DAQ driver. It looks like you don't have that driver installed or that you don't have support installed. One quick way to check and see if you have the traditional DAQ driver installed is to go to LabVIEW, then pull up the functions palette. Go to NI Measurements>>Data Acquisition. If you don't have the "data acquisition" option, then either support or the driver itself isn't installed. The next step is to go to the Measurement and Automation Explorer (Start>>Programs>>National Instruments>> Measurement & Automation). On the left hand side of the window, you'll see a directory structure. Under My system, you'll see a "software" directory. Expand it. Look for something called "Traditional DAQ". If you don't have it, then you don't have the traditional DAQ driver installed and that's the problem. To install the driver go to the following web site http://search.ni.com/nisearch/nisearchservlet?nistype=default&filter=+%2BProductLine%3A41+%2BDownloa.... I'm assuming you're using WinXP. Download and install the driver. If you have hardware physically installed in the computer when you install the driver, that adds another step. You'll have to perform a repair of the driver once it's installed. You can do this by going to Start>>Settings>>Control Panel>>Add Remove Programs>>NI Software. Then select change. That should create a list of currently installed software. Select "NI-DAQmx" and then hit the repair button.
One last note. When installing the driver, make sure you select to install support for LabVIEW. You should now see the vis that you were missing in LabVIEW and therefore the program should now run.
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

I can not get 3D surround sound to work with my X-Fi and headhones please he

I have an X-Fi Xtrememusic soundcard and I have been unable to get possitional sound working consistantly with two sets of stereo headphones. I have the latest drivers installed and have creative audio console set to: headphones, game mode, CMSS 3D and I still have no possitional sound at all. Noises seem to come from above my head I can't tell right from left or forward from backward in other words I am completely lost as to were sounds are coming from in games. I used to be able to get possistional sound to function by changing headphones in the creative audio console to 2. or 4. speakers.
If I set the mode to 5. or higher the sounds in games (footsteps, weapons fire) would become heavily muted and hard to hear while I would gain better positional sound for other players and now this does not work at all. I have also tried disabling sync to windows control panel and changing its sound options and there have been no beneifts from doing so. In settings other then stereo headphones no sound was produced at all while others stopped sound coming from one of my headphone speakers. I am at a total loss I can not think of anything thing else to fiddle with.
My system specs: Athlon 64 4000+ San Diego, ASUS A8N-E mobo, 2GB DDR400 2.5CAS Buffalo ram, EVGA 7800GT CO, X-Fi Xtrememusic. No popping or crackling sound at least. Thank you you reading this.
<SPAN class=time_text>
<SPAN class=time_text>
<SPAN class=time_text>
Message Edited by Blah-and-Feh on 04-5-2006 :50 PM

Hay everyone thanks for the advise but i was finally told by one of the support personnel that I actually need the dri've bay insert that comes with the fidelity in order to get the cmss 3d to work with the headphones.
I only purchased the extreme gamer not the extreme gamer fidelity and that is why i cant get the cmss 3d to work but it still advertises on the box that you can use the cmss 3d and get that feature. :angry:? Should have done homework but i was out Christmas shopping and i went off of what the box advertised. This is very unusual for me to shop compulsi'vely. The funny thing is that everything else on the box that is advertised such as the increase of the CPU and the EAX HD features are able to be used. Im very upset about this because I particularly bought this card for the cmss 3d. I really don't know if i will ever recommend another Creative Product to any of the people i do computer repair or gamer builds for, unless this gets resolved and the only way to resolve this is to get the cmss 3D to work. By the way I did do a full reinstall even with clean boot so that isn't the problem. I'm really upset and ready to return this product to Best Buy unless this can be resolved. Any admin that comes across this please send me any ways of getting a hold of anyone that can help. Tks and hope yall had a wonderful Thanksgiving.
Creatively toastedMessage Edited by toast on -24-200608:48 PM

No 5.1 surround sound on ATV2 with "handbraked" files

I found an aswer to my problem in another thread marked as "solved" but does not work for me. This is the situation:
What I do is transcoding my DVDs using Handbrake, using the "High Profie", and then adjusting the audio tracks typically as follows:
- track 1: english 5.1 --> encoder: AAC --> mixdown: Dolby Pro Logic II;
- track 2: english 5.1 --> encoder: AC3 Passthru --> mixdown: AC3 Passthru;
- track 3: german 5.1 --> encoder: AAC --> mixdown: Dolby Pro Logic II;
- track 4: german 5.1 --> encoder: AC3 Passthru --> mixdown: AC3 Passthru;
Now what I get is four language tracks when playing in iTunes or QuickTime: the two Dolby tracks are enabled and show up as "stereo" (ok, I guess from what I understand how Dolby Pro Logic works) and the two surround tracks grayed out (probably since there is no 5.1 system attached to my mac).
However, when I play the file from my ATV2 it shows only two language tracvks (one German and one English) and from the sound qiuality it is definitely the "pseudo-5.1" coming from the stereo tracks mixed down as Dolby Pro Logic II.
So I still do not know what to do to play "real" 5.1 sound via my ATV from ripped DVDs.

So if these aren't Dolby pro logic tracks I am a bit confused here. Also, according to your explanation: once I change the language track using the menu from atv2, how can I ever reactivate the ac3 track if it does not show up in the menu?
Dolby Pro Logic I (passive) and II (active) audio is encoded in stereo normally as AAC tracks which do show up in the TV2 Chapter/Audio menu while I have never seen any AC3 audio track show up in the TV2 Chapter/Audio menu. As to switching between AC3 (in the DD5.1 "Auto" or "On" mode) to any of the AAC language tracks, I simply set the DD5.1 mode switch to "Off" and the currently defaulted AAC language track automatically plays and can be switched to any other available AAC language track using the TV2 Chapter/Audio menu. Turning the DD5.1 option back "on" or to the "Auto" mode re-engages AC3 audio playback on my system.
However, I have read about "only one 5.1 track" elsewhere (can't remember where). Do you have more info on this?
Have only tested one multi-AC3 track test file with English as the first DD5.1 language. As soon as I finish posting this, will go back and create a test file with English and French AC3 DD5.1 audio tracks reversed to see I can get the French audio to play. (Had previously tried changing the default menu and audio language settings on the TV2 device to see if that would change the AC3 DD5.1 language being played but it had no effect. If changing the AC3 track order also has no effect, will try changing the settings on the iTunes computer to see if that may control which AC3 language track is streamed to the TV2 device.

No surround sound on DTT2500 with X-FI music card

Similar Messages

Maybe you are looking for