No sutable purchase document found but see in EKKO and Me23n

Hi expert,
Not getting Printout via ME9F.
No sutable purchase document found.
but i can se documnet no in EKKO and Me23n.
Regards,

Hi Vivek,
ME9F can only be used to display Purchase Orders where print relevant changes have been made after output.
See information in Note 450617:
If no print-relevant changes to the purchasing document exist, then it
only possible to display the change message again via the spool request
that was created or the optical archive (if available). For more
information, also consult Note 391637.
In addition, in the above-mentioned transactions bear in mind that you
can recognize a change message by the corresponding indicator on the
message list.
Regards,
Purnima.

Similar Messages

Lockbox File Help- documents found but status went unprocessed

Good Morning SAP Guru's,
I need some help here. I have a payment in a file that contains 1,662 4 records for one check. 80% of the reference information was found and on the report it states document found but the payment still went "unprocessed' in the lockbox program FLB1. The payment clears receivables in multiple customer accounts. When the file was uploaded, we deliberately did not select "enhanced invoice number' for this reason.
Why didn't it hit at least in one customer?
Any help/insight would be greatly appreciated!
POINTS PROMISED

Folks-
The error message on the Posting Log from the Lockbox program was as follows:
Accounts receivable posting error: (F5 102) Customer * is not defined in company code NNNN
As I mentioned in my earlier post, many of the documents hit, why didn't it post "On account" or "Partially applied"?

I purchased a book but its not downloading and i've already been charged

I've purchased a book from ibooks and a message came back that my information is invalid, so i try it again and it happens again. I figured its my bank account, so i go check and its fine; the money is there. and the records shows that the money has been taken out TWICE!! I need to know whats going on??

When you make purchases in iTunes, it will and can take up to 24 hours to refresh on your end. So if you have made purchases before this and if you do not know how to keep track of your own purchases, you may have had less money in there, but did not refresh on your account for you to see accurately. so no, iTunes did not rob you, you just don't know how to manage your money, and probably didn't have enough store credit in your account to cover the purchase, so iTunes took the rest of your store credit and paid the rest on your card, and your bank declined the purchase causing the account to have an unpaid order on it.
To view your purchase history go here: See your purchase history in the iTunes Store
You will see there the unpaid order. In order to pay it, you'll have to use an alternative credit card or purchase more iTunes store credit. Hope this helps.

Purchased new mac, but lost serial number and no longer have access to registered email. Help

Hi,
As the subject header states, I purchased new mac, but lost my serial number and no longer have access to registered email. I had purchased the Creative Suite Web and Design C6 version. Support said they can only forward my lost serial number to the registered email. Since she was without effective tools, she recommended I post something on the forums for support. Anyone have the ability to get me back to using my suite?
Thank you,
Philip

Only the person(s) you spoke to have the ability to provide you with the serial number. People here can merely suggest where to look for it. If you registered your software when you installed it originally then you should be able to find your serial number stored in your Adobe account online in the Products section.
You might want to try updating your information in your account if the email is the only thing holding back from getting the info sent to you.

Please help with ACL "found but not expected," permissions, (and yes I've read /kb/TS1448)

Hi, I am getting this report from Disk Utility when I repair permissions.
They keep coming up even if I run repair permissions multiple times.
Repairing permissions for “SSD ML Clone 928”
ACL found but not expected on “private/var/root/Library”
Repaired “private/var/root/Library”
ACL found but not expected on “private/var/root/Library/Preferences”
Repaired “private/var/root/Library/Preferences”
Permissions repair complete
And, yes I have read Apples Support Page,
"Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore,"
at:
http://support.apple.com/kb/TS1448
And, these particular ACL's are not listed on that page, as being ones that can be safely ignored.
Can anyone tell me for certain if this is anything I should be worried about, (or not), and if it's a problem, what I can do about it?
Thanks in advance!

OK, I resorted to running ACLr8 1.3
I had found a post about running some terminal commands first, and then restarting in recovery mode, and repairing acl's. It was bit complex.
This app, ACLr8, runs it all in terminal, and without a reboot.
Disk Utility immediately gave a clean report!
ACLr8, had been updated for Lion, but hadn't been for ML.
So although I had some trepidation about running it, my understanding is ML is more of an upgraded Lion than a new OS, so I felt safe taking the risk.
And it paid off!
I suppose it didn't actually fix anything, but hey, out of sight, out of mind!
And therefore, peace of mind.

BI - Purchase document's item level contion type and correspondingvalue.

Dear Experts
I would like to know - Is there any standard data source in BI for item level condition type and values of Purchase order document. These are available in SAP R/3 . Shall be grateful, if you could kindly help me out
Kind regards - P.L.Dey

Hi,
Actually, These informations are stored in Characteristics and Key Figures i.e., CVCs(characteristic value combinations)
When you do Purchase Order,
These Values will store in PURCHIS ( Purchasing Information Systems) and that to, in Open Information Warehouse Data base in the form of CVCs. (In Particular Table forms)
EG.,
Values are stored in Key Figures (Eg., Number....)
Names are stored in Characteristics ( Eg., Purchase order..)
in CVC, we can easily see, Number of purchase orders for vendor, or so.....
Hopes it is useful
Thanks.

I try to go on itunes to purchase new music but everytime i try and search for an artist itkicks me off my search engine and nothing happens....almost like im denied access to buy music.....help!

i access my itunes account and try to search for new music to purchase and everytime i try (even with money in my account) im kicked off the search engine....almost like im denied access to purchase music.....help!

your itunes may be freezing, you can close and re-open it?
If the problem persist, you can try deleting itunes and re-installing it to fix any problems it may have

Dear Guru kindly clear my confusion In Print Output of a Purchasing Document In SAP.

Dear Guru,
I am creating a RFQ AND want a printout for it from the standard SAP.
1= I given document no ,purchasing group and in message data given application as EA , Message Type as NEU Processing status 1.but found message
as no purchasing document found.
2=Checked NACE the standard output types
The program ,form routine are above and in partner function the standard partner function is there.
3=If i want a new smart forn then should i use the same program same form routine , same form or make a copy of it and attach a smart form
to the standard or any other process is there?

Hi
See these notes as a checklist
SAP Note 457497 - FAQ: Message processing in purchasing
SAP Note 61871 - Output of messages and release strategy
Check if the message exists in table NAST
I hope this helps you
Regards
Eduardo

Receiver File Adapter - Empty document found error

Hi,
I have a slight issue that I do not understand.
For example, I have a file that is 256 bytes in size and definitely has some content. However, when the file adapter processes the file it says in the log "Empty document found" - but I can see the file has content.
Any ideas ? I am using using XI 3.0 SP19.
Cheers
Colin.

hi colin,
i will agree with u,
may be the XI can not understand your test data,
can u tell me the language of test data.
In file adapter go to encoding select TEXT and UTF-8.
may be this will works.
regards
sandeep.

Due List for Purchasing Documents

Dear Experts,
I'm implementing SMI scenario with SAP SNC 5.1. I was traying to create an ASN, for a Replenishment Order already created, using "Due List for Purchasing Documents" screen, but when I insert the data to filter the list the following error will appear me:
ODM error while loading releases
What it means? How can I solve it?
Thank you in advance.
Edited by: PTP Team Consultants on Dec 5, 2011 5:24 PM

Hi Vinod,
thanks for the answer but I already implemented that note.
Any other solutions?
Thank you

Contract ID and Purchase Document No in MM

Guys,
Please help me to understand if contract ID and Purchase Document No in MM
will be the same thing or not.. In a report i need to get Purchase Document No but
in the datasource i have only contract id.. To my knowledge contract is a document type under purchasing...So contract id should be equal to the purchase document no in that case... is it right???? Please confirm

Hi,
well both numbers are stored in the same field. In your source system it is ekko-ebeln. But the document type defines the number to be a purchase order or a contract no. And so it is in BW. The number is stored in the same infoobject, but together with the document type you can identify that number as a purchase order or a contract no.
Hope that helps!
kind regards
Siggi

Differentiating of pricing schema for each purchasing document type

Dear colleagues,
This topic could be discussed before but I need to clarify some points.
We would like to differentiate pricing schema per purchasing document types (e.g. AA and ZZ). These purchasing documents are not like domestic and import types.
There some condition(s) where purchasing document type AA should not be able to maintain whereas ZZ should be able to.
In this case shall use one unique pricing schema for both purchasing document types if so how can I hide some conditions for document type AA or if I use separate pricing schema how can I set different pricing schemas for different purchasing document types because both document types have same purchasing organization, vendor etc.
Regards
Metin

Hi,
Why to have two different schema groups! Is procurement process is completely different, so use to have!
(have thought of separate condition types for each Calculation Schema)
Based on Schema Group Of Vendor in the vendor master, the PO for vendor with respective Schema Group Of Vendor will populate the assigned condition typesu2019. Follow path:
SPRO->MM->Purchasing->Conditions->Define Price determination process ->Define Schema Determination
Under segment:
Determine Calculation Schema for Standard Purchase Orders
Here you can assign Schema Group Purchasing Organization, Schema Group of Vendor and Calculation Schema
Under segment:
Determine Schema for Stock Transport Orders
Here you can assign Schema Group Purchasing Organization, PO document type and Calculation Schema
Regards,
Biju K

I just receive my bank statement at it says that i purchased but i''m not and it happened 4th times

Hi i just receive my bank statement and it says that i purchased on itunes but i'm not and it happened 4th times

Hi Jeyaes!
It sounds like you are experiencing an issue that could be resolved by referring to the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Thanks for using the Apple Support Communities. Have a good one!
-Braden

TS1702 I purchased a game but had to update my card details now it says purchase not found

I made an in app purchase to unlock a game but had to update my card details. Now it says I have already purchased the game but no record of the purchase is found. I have tried deleting and re downloading the game and tried turning the iPad off and on. What do I do?

Hello Andenbat,
Thank you for the details of the issue you are experiencing with your In-App purchase. I found some information about redownloading In-App purchases that might help:
Redownload an In-App Purchase
If you lose your In-App Purchases because apps were accidentally deleted or you had to restore your device without a backup, you may be able to download some of your purchases again for free. See which types of In-App Purchases you need to purchase again or can redownload for free in the table:
Type
Download for free
Purchase Again
Consumable
X
Non-consumable
X
Non-renewing subscriptions
X
Auto-renewable subscriptions
X
To download an In-App Purchase again, you must download it from within the installed app using the same iTunes Store account name you used for the original In-App Purchase.
iTunes Store: About In-App Purchases
http://support.apple.com/kb/ht4009
If you continue to experience issues with the purchase, I recommend reporting the issue to the iTunes Store using the steps in the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

No sutable purchase document found but see in EKKO and Me23n

Similar Messages

Maybe you are looking for