No System Addres Book After Migration and MTP Status
I have finished migrating Groupwise 8 from Netware to SLES 11 SP3 in a test environment and have run into two issues. This test system has no internet access (would it be possible to give it access without interfering with the production GW server?).
One, there is no system address book available although sending to another user in the system appears to work when you type their common name (the auto populate does not work, however).
Two, when viewing the POA using the http monitor page, the MTP Current Status shows as Unavailable for both Send and Receive and the Inbound and Outbound TCP/IP addresses are both blank (maybe due to no internet access?).
I have checked my Post Office link and it is configured as TCP/IP with the correct IP address. I followed the Caledonia guide to moving Groupwise and I moved all components of groupwise.
What did I miss?
Thanks,
Scott
Hi Laura.
I have not upgraded anything yet to 2012, everything is still GW8. I did not have the BIND EXCLUSIVELY checked for any of the agents. I have now done so for webaccess, the mta and poa. This did not make any difference.
I also started the mta first, then the poa, as I don't know what order they start up in when the server starts or when using the rcgrpwise command but again this did not make any difference.
Looking at the mta http monitor, I also see "mtp unable to open connection [8925]". How do I troubleshoot this? When I installed SLES 11, I did not enable the firewall, so that should not be blocking it. The mta and the poa are using default ports, 7100 and 7101 respectively and both list the correct ip address after the move.
I am also going to try a rebuild on the wpdomain.db to see if that helps. What else can I look at?
Thanks,
Scott
>>> On May-28-14 at 5:16 AM, in message <[email protected]>, laurabuckley<[email protected]> wrote:
Hi Scott,
Sounds like your wpdomain.db database is having issues. Did you start
the MTA first, let it update to 2012 and then start the POA?
No internet access should not interfere with your MTA functioning
correctly.
On your GroupWise agents, have you clicked the BIND EXCLUSSIVE for the
IP addresses in ConsoleOne?
Let us know how it goes.
Cheers,
Laura Buckley
Technical Consultant
IT Dynamics, South Africa
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below...
laurabuckley's Profile: https://forums.novell.com/member.php?userid=122
View this thread: https://forums.novell.com/showthread.php?t=477296
Similar Messages
-
I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. PereiraHi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira -
I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. PereiraHi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira -
ITunes, iPhoto and system clock crash after migrating from Snow Leopard
Hello everyone,
I had MacBook Pro with Snow Leopard but had to migrate to older one with 10.5.8 today.
After 4 hours it finished and everything seems fine except 3 things:
1. iTunes crashes on each launch attempt. I even followed an article to uninstall it, got a new one from apple.com but I still have the same issue.
2. iPhoto opens with success and shows folders overview, but when I click to enlarge a photo I get a blank screen. After about 2 minutes the program quits unexpectedly.
3. System clock behaves really strange. It seems to ignore time zone settings completely. I select Melbourne, Australia and quit Sys preferences but when I get there back I still have GMT time. Setting manually gives me nothing - time of email is still GMT.
Anyone have seen similar problems after migrating? My primary guess is that this issues are caused by migrating to older Mac OS version, but maybe it's not the point. Anyway, would be great to have this fixed. Without iPhoto, iTunes and proper times in e-mail inbox my Mac is pretty useless...I installed this update, restarted but nothing helped. By permissions - what do you exactly mean, how could they change or what could be broken?
I also noticed that what is broken as well are the PYM Player and Quick Time. When I open a movie, I got the sound but no video output at all. It is similar to iPhoto where I see the miniatures but normal size viewing goes blank.
Does anyone has a clue what can be broken that causes such problems?
My Mac is now really just an e-mailing and surfing machine... -
MBP Retina Freeze after migration and no option for Reinstall
Hello,
just want to inform you, I have just maked the migration to my new MBP retina and have a problem that it will freeze only option is to boot in safe mode.
Have deinstalled apps which could be the problem such as Paralles desktop, Symantec Endtime protection, SMC Fan... still have the problem with all users.
Deleted the Startubitems, launchagents and deamons still the same problem.
So I wanted to make a complete reinstalltion and here is the problem the apple server do not let me make the reinstallation.
This version of Mac OS x 10.7 cannot be installed on this computer
Answer for the support they have to get in contact with the Itunes department this can take 2 days. So I can only enjoy my mbp in safe mode.
Kann someone help me to fix the freesing after the migration?I can try that but I am afraid that I do than not even have the safe mode any more. Will spend 1-2 more hours to fix the problem, because after the reinstallation I will do the same migration and may end at the same situation.
So better try to fix it.
Fix the spotlight index crash and know have a new one I386_pmGetDeadline: Null pointer.
This have to do with the power management. Will try that and than let us see. -
ESS LSO System permitting Booking after "Allowed No. of Accesses" reached.
Dear Gurus,
I hope you could help solving the following problem in Portal ESS.
The system creates in Portal in u2018My Trainingu2019 the next row for the same course,
when u201CAllowed Number of Accessesu201D to a course (ET) on-line Exam (ET) has been reached.
This additional Booking and adding the next row can take place the following day,
after the Max Accesses has been reached. This can be repeated many times, thus the 'student' might take the on-line exam as many times as he/she wishes, as opposed to have max 3 accesses.
The on-line Exam (ET) has a corresponding Course Type (D), where on u2018Completion Specification InfoType 5008u201D has the u201CAllowed Number of Accessesu201D = 3.
Thanks in advance,
Best regards,
GraceSorry its an include
Main Program SAPLLSO_CURRICULUM
Source code of LLSO_CURRICULUMLC1
CALL FUNCTION 'RH_READ_INFTY_NNNN'
EXPORTING
plvar = im_plvar
otype = im_otype
objid = im_objid
infty = '5008'
begda = im_setdate
TABLES
innnn = lt_p5008[]
EXCEPTIONS
OTHERS = 0.
READ TABLE lt_p5008 INTO ls_p5008 INDEX 1.
IF sy-subrc <> 0.
RAISE failed.
ELSE.
ex_maxaccess = ls_p5008-max_access.
ex_dealmax = ls_p5008-dealmax.<<<<<<<<<<<<<<
ex_dealend = ls_p5008-dealend.
l_duration = ls_p5008-ldurmax. -
Unable to open System Attendant mailbox after migration
Greetings.
I've been working on moving mailboxes from an old exchange 2007 server to Exchange 2013. Both Exchange servers are in the same AD. During the move, the target Exchange server ran out of disk space (Don't ask...), and ended up apparently losing track of its
message store. Mail databases are still fine, but I can no longer access the migration tool or use migration cmdlets, as the information store is missing.
The following error is logged when I try to run Get-MigrationBatch:
Get-MigrationBatch
abcfritid.local/Users/Administrator
S-1-5-21-3986740184-3140633903-440486776-500
S-1-5-21-3986740184-3140633903-440486776-500
Remote-ManagementShell-Unknown
7676 w3wp#MSExchangePowerShellAppPool
36
00:00:00.1093719
View Entire Forest: 'False', Default Scope: 'abcfritid.local', Configuration Domain Controller: 'SERVER.abcfritid.local', Preferred Global Catalog: 'SERVER.abcfritid.local', Preferred Domain Controllers:
'{ SERVER.abcfritid.local }'
Microsoft.Exchange.Data.Storage.StorageTransientException: Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=EXCHANGE/cn=Microsoft
System Attendant. ---> Microsoft.Mapi.MapiExceptionMailboxQuarantined: MapiExceptionMailboxQuarantined: Unable to open message store. (hr=0x80004005, ec=2611) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=178] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc
returned [ec=0x0][length=232][latency=0] Lid: 52176 ClientVersion: 15.0.847.32 Lid: 50032 ServerVersion: 15.0.847.6032 Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropLogon [254] Lid: 17082 ROP Error: 0xA33 Lid: 26937 Lid: 21921 StoreEc: 0xA33 Lid: 27962
ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 50608 Lid: 32848 dwParam: 0xD Lid: 61416 StoreEc: 0xA33 Lid: 56872 dwParam: 0xFE Lid: 42712 StoreEc: 0xA33 Lid: 10786 dwParam: 0x0 Msg: 15.00.0847.030:EXCHANGE Lid: 1750 ---- Remote Context
End ---- Lid: 26849 Lid: 21817 ROP Failure: 0xA33 Lid: 26297 Lid: 16585 StoreEc: 0xA33 Lid: 32441 Lid: 1706 StoreEc: 0xA33 Lid: 24761 Lid: 20665 StoreEc: 0xA33 Lid: 25785 Lid: 29881 StoreEc: 0xA33 at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String
message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException) at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException) at Microsoft.Mapi.ExRpcConnection.OpenMsgStore(OpenStoreFlag
storeFlags, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, String& correctServerDn, ClientIdentityInfo clientIdentityAs, String userDnAs, Boolean unifiedLogon, String applicationId, Byte[] tenantHint, CultureInfo cultureInfo) at Microsoft.Mapi.MapiStore.OpenMapiStore(String
serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String&
correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout, TimeSpan callTimeout, Byte[] tenantHint) at Microsoft.Mapi.MapiStore.OpenMailbox(String
serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity, String applicationId, Byte[] tenantPartitionHint,
Boolean unifiedLogon) at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean unifiedSession) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore, Boolean
unifiedSession) at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity,
Boolean unifiedSession) at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass1a.<CreateMailboxSession>b__18(MailboxSession mailboxSession) at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType,
ExchangePrincipal owner, DelegateLogonUser delegatedUser, CultureInfo cultureInfo, String clientInfoString, IBudget budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure initializeMailboxSessionFailure, MailboxSessionSharableDataManager
sharedDataManager) at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IBudget budget, Boolean unifiedSession, MailboxSessionSharableDataManager sharedDataManager) at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal
mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags initFlags, IList`1 foldersToInit, IBudget budget, Boolean unifiedSession, MailboxSessionSharableDataManager
sharedDataManager) at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString) at Microsoft.Exchange.Migration.MigrationDataProvider.OpenMigrationMailboxSession(ExchangePrincipal
mailboxOwner, String connectionDescription) at Microsoft.Exchange.Migration.MigrationDataProvider.CreateProviderForMailboxSession(MigrationADProvider activeDirectoryProvider, MigrationFolderName folderName, Func`2 mailboxSessionCreator) at Microsoft.Exchange.Migration.MigrationBatchDataProvider.CreateDataProvider(String
action, IRecipientSession recipientSession, Nullable`1 status) at Microsoft.Exchange.Management.Migration.GetMigrationBatch.CreateSession() at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset() at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
ServerTransient
Microsoft.Mapi.MapiExceptionMailboxQuarantined: MapiExceptionMailboxQuarantined: Unable to open message store. (hr=0x80004005, ec=2611) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called
[length=178] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=232][latency=0] Lid: 52176 ClientVersion: 15.0.847.32 Lid: 50032 ServerVersion: 15.0.847.6032 Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropLogon [254] Lid: 17082 ROP Error:
0xA33 Lid: 26937 Lid: 21921 StoreEc: 0xA33 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 50608 Lid: 32848 dwParam: 0xD Lid: 61416 StoreEc: 0xA33 Lid: 56872 dwParam: 0xFE Lid: 42712 StoreEc: 0xA33 Lid: 10786 dwParam: 0x0
Msg: 15.00.0847.030:EXCHANGE Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0xA33 Lid: 26297 Lid: 16585 StoreEc: 0xA33 Lid: 32441 Lid: 1706 StoreEc: 0xA33 Lid: 24761 Lid: 20665 StoreEc: 0xA33 Lid: 25785 Lid: 29881 StoreEc: 0xA33
at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException) at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, IExInterface iUnknown, Exception innerException) at Microsoft.Mapi.ExRpcConnection.OpenMsgStore(OpenStoreFlag storeFlags, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, String& correctServerDn, ClientIdentityInfo clientIdentityAs, String userDnAs,
Boolean unifiedLogon, String applicationId, Byte[] tenantHint, CultureInfo cultureInfo) at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password,
String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, Boolean unifiedLogon, String applicationId, Client xropClient, Boolean
wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout, TimeSpan callTimeout, Byte[] tenantHint) at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String
password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity, String applicationId, Byte[] tenantPartitionHint, Boolean unifiedLogon) at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore
linkedStore, Boolean unifiedSession)
Ex2B87C8
False
0 objects execution has been proxied to remote server.
0
ActivityId: 090bb0d7-dcb2-4b61-ba15-8262bd5e1fa8
ServicePlan:;IsAdmin:True;
When I check ADSIEdit for the Home Attendant name in CN=Configuration,CN=Microsoft Exchange, CN=First Organization, CN=Administrative Groups, CN=Exchange Administrative Group, CN=Servers,CN=EXCHANGE,CN=InformationStore, that tree is empty, no distinguished
name for the store is listed there.
Any help or directions you could provide would be helpful.Hi,
System Attendant mailbox is required to be available during mailbox moves. For instance, if you have the mailbox store containing the System Attendant mailbox dismounted during a mailbox move, the move will fail.
I recommend you use the Get-Mailbox -Arbitration | fl name, data* command to get the mailbox database in which all arbitration mailboxes reside. Make sure this mailbox database is mounted.
If you deleted it by mistake or it didn't exist in your Exchange(for whatever reason), you need to re-create the AD account by running setup.exe/prepareAD. Once the account is created, configure a mailbox for the account.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Help, I lost my system adminstrator account after archive and install
I did an archive and install and checked 'preserve users and network settings'. Prior to install I had two accounts: mine (adminstrator) and my son's. My iTunes and iPhoto are all on my account. After install, my normal desk top appeared. Software update informed me I had updates to download. I started the process and the password window appeared, but would not accept my password. I checked the users in the right hand corner of the menu bar and only my son's account appeared. When I clicked on that, a log-in window appeared (and my desktop disappeared). The only log-in option is my son's account. I can log into his account ok, but mine no longer shows up. I tried to access my account info in the previous system folder, but my son's account does not have sufficient access rights. How can I get my account back?
As a side note, I went to my old mac (a power pc G4 iMac) and could no longer log-in to iTunes Store or to .Mac. I changed my Apple ID password so I can now log into .Mac and the iTunes store. I don't know how to get my adminstrator account back on my Intel mac. My old Mac cannot be upgraded to Leopard and has no airport card.Same thing happened to me! Now when I want to delete apps I get a window demanding my administrator password. I give it, but that is no longer correct. Actually, I suspect it is but the Administrator name has changed, but I have no idea what it now is. I tried to use the change password utility on the install disk, but it's just exactly that: a password changer, it won't change the administrator name, or even tell you what it is.
Any help would be greatly appreciated -
Screen flashing grey after startup and no status bar
Recently, whenever I try on my mac for the first few minutes after the startup, the screen starts flashing to grey and back.
After the flashing stops, I got no status bar. I can still press the buttons there (Wifi, Bluetooth, etc) but cannot see them (as seen in image).
Does anyone have any clue what it might be?
Thanks in advance!Try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
Re: [iPlanet-JATO] Re: CSpMultiSQL after migration
Alex,
I just switched over to Netscape Messenger from OutLook and I didn't
realize that emails were displayed in threaded hierarchies and therefore
did not see that you had already had responses to your post. Sorry for
the confusion in my previous response.
matt
njdoe123 wrote:
Hi,
I have tested another simple MultiSQL. The Update, Delete, Insert
are not funcitonal. I'm using only one single database table (no
join). It worked great in netD. The database is Oracle.
We're using migtoolbox-1.1.1 with Jato 1.1. Do we have to modify
the UpdataQueryModel.java file or other ? Or could i use jato 1.2
to replace 1.1 ?
The following is log from AppServer. Could i receive the migtool
1.2 beta ?
Thanks,
Alex Lin
<Dec 21, 2001 11:18:36 AM PST> <Error> <HTTP> <[WebAppServletContext
(1572805,Tes
t3AppWar,/Test3AppWar)] Root cause of ServletException
com.iplanet.jato.model.ModelControlException
java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.dbaccess.DBError.throwSqlException
(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7
(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch
(TTC7Protocol.java:822
at oracle.jdbc.driver.OracleStatement.executeNonQuery
(OracleStatement.ja
va:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther
(OracleStatement.jav
a:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout
(OracleStateme
nt.java:1900)
at oracle.jdbc.driver.OracleStatement.executeUpdate
(OracleStatement.java
:693)
at com.iplanet.jato.model.sql.QueryModelBase.executeUpdate
(QueryModelBas
e.java:1788)
at com.iplanet.jato.model.sql.QueryModelBase.update
(QueryModelBase.java:
420)
at
com.iplanet.jato.view.RequestHandlingViewBase.executeAutoUpdatingMode
l(RequestHandlingViewBase.java:1070)
at
com.iplanet.jato.view.RequestHandlingViewBase.executeAutoUpdatingMode
ls(RequestHandlingViewBase.java:938)
at
com.iplanet.jato.view.RequestHandlingViewBase.handleWebAction(Request
HandlingViewBase.java:821)
at Test3App.Test3.PgUpdateViewBean.handleUpdateRequest
(PgUpdateViewBean.
java:838)
at java.lang.reflect.Method.invoke(Native Method)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest
(RequestHa
ndlingViewBase.java:341)
at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewB
eanBase.java:481)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler
(ViewBeanBase.
java:431)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest
(ApplicationSe
rvletBase.java:645)
at com.iplanet.jato.ApplicationServletBase.processRequest
(ApplicationSer
vletBase.java:431)
at com.iplanet.jato.ApplicationServletBase.doPost
(ApplicationServletBase
.java:296)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet
(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet
(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute
(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute
(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run
(ExecuteThread.java:120)
--- In iPlanet-JATO@y..., "Matthew Stevens" <matthew.stevens@E...>
wrote:
EDITED
-----Original Message-----
From: Matthew Stevens [mailto:<a href="/group/SunONE-JATO/post?protectID=029166114165042198028082000056130080177026031196061130152150">matthew.stevens@e...</a>]
Sent: Thursday, December 20, 2001 4:32 PM
Alex,
If your implied question is, "Looks like the iMT did not migrate
this block
of code. What is my next step?" Then I have an answer for you. If
I
misinterpreted your email then please clarify.
The procedure for ND migration using the iMT (as outlined in the
documentation
under <iMT_install_dir>/docs) is that customized code originally
provided by
the ND developer is purposely commented out so that the file can
compile.
Our experience in migration efforts shows that it is preferrable to
the
migrator to be able to select which part of the application they
want to
work
on by uncommenting specific blocks of code - allowing for
incremental
edit/compile/test cycles. If we left all this arbitary code un-
commented,
then nothing would compile after migration and you would have a huge
roadblock for moving forward.
Judging from the "spider" APIs which are still seen in your code
block, you
must not have run the Regular Expression API mapping tool which
will take
care of many of this code. I believe that the API mapper will
migrate this
block of code almost 100% and you just need to uncomment it.
matt
-----Original Message-----
From: njdoe123 [mailto:<a href="/group/SunONE-JATO/post?protectID=230176091112175091130232203140129208071">first.us@a...</a>]
Sent: Thursday, December 20, 2001 4:04 PM
Subject: [iPlanet-JATO] Re: CSpMultiSQL after migration
Oops !
The following (very simple) customized code was not migrated.
In business logic - after update, goto another page.
My backend database is Oracle.
Thanks.
Alex Lin
-------------------------+
// The following code block was migrated from the Update_onWebEvent
method
// MigrationToDo : THIS CODE MUST BE MANUALLY ADJUSTED
int command = PROCEED;
CSpPage nextPage =(CSpPage) CSpider.getPage("PgDistrict");
executeAllUpdatingDataObjects();
return nextPage.load();
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Alex,
CSpMultiSQL migrate just fine. You may have had to do something
extraordinary for your
particular database in your select statement.
Can we see the entire exception stack trace, and the code that is
executing the model?
Also, what database are you hitting?
c
njdoe123 wrote:
Hi,
It's a bit strange while doing CSpMultiSQL (select and update).
I have received the following error on the AppServer.
Web event invoked: Test3App.Test3.PgWebUserViewBean.Update
<Dec 19, 2001 2:20:05 PM PST> <Error> <HTTP>
<[WebAppServletContext(168087,Test3
AppWar,/Test3AppWar)] Root cause of ServletException
com.iplanet.jato.model.ModelControlException
java.sql.SQLException: ORA-00933: SQL command not properly ended
'SQL command not properly ended ?' - i haven't touched the sql
code,
it's just simple select and update to one table.
Could iMT do MultiSQL ? If not, what is the solution after
migration
Thanks,
Alex Lin
For more information about JATO, including download information,
please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information,
please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information,
please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspThank you - Jin and Todd.
Will try that.
Atul
--- In iPlanet-JATO@y..., Byung Jin Chun <bchun@n...> wrote:
try using kregedit and modify the key for the jvm args, using the -x
parameters for the 1.2 runtime
Jin
-----Original Message-----
From: Todd Fast [mailto:<a href="/group/SunONE-JATO/post?protectID=101233080150035167169232031248066208071048">Todd.Fast@S...</a>]
Sent: Tuesday, February 19, 2002 8:40 PM
Subject: Re: [iPlanet-JATO] Re: OutOfMemoryError
Atul--
Out of curiosity - How do you modify the memory parameters for
the container's VM ?? I know I should try to do some research but
figured you may already have some insight and willingness to
share.
Please consider this as low priority.It differs by container; I don't remember details of any particular one.
>
Todd
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
<http://developer.iplanet.com/tech/appserver/framework/index.jsp>
[Non-text portions of this message have been removed] -
IPhoto doesn't open after migration/upgrade
I see several discussions similar to mine, but not exactly.
I just migrated from a MacBookPro 10.6.8 to a Pro 10.8.2.
My iPhoto was iPhoto 8, vers 7.1.5.
After migration and upgrade my iPhoto is vers 9.4.1.
When I try to open iPhoto I get the message that the library files must be upgraded.
I downloaded and installed iPhotoLibraryUpgrade. When I try to run the program, it says:
You library can open with the current version of iPhoto and does not need to be prepared with this tool.
I have tried opening iphoto with the cmd-opt key, but nothing here will run.
Get the same message: the files must be upgraded.
I downloaded the libraryManager and tried to open the library "package" but an unable to.
It's "untouchable".
Please, any suggestions would be great as I sit here with no access to my iPhotos.With iPhoto Library Manager you need to run the Rebuild command not open the package.
-
I want to restore the email from time capsule. After migration and it shows successful, but, I still cannot find the email data. Pls adv
The missing file thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
At guess you've used a different profile name. Files inside the media folder have survied the transfer, but those outside are expected to be on the same absolute file paths, but no longer are.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2 -
After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?
If you are syncing using iCloud, try going to System Preferences/iCloud (computers) and checking Safari. If it is checked, try deselecting it, wait 10-15 seconds, and then check it again.
-
Migration to new G/L , balance and line item display after migration
Hi,
After migration in the development
system, the balance of a G/L account
in a year before the migration date
cannot be displayed unless the G/L
account is managed on open item basis
or is a reconciliation account. The
message "No data found in 2007" is
issued.
Additionally, the correct balance of
G/L accounts if it is managed on open
item basis or is a reconciliation
account cannot be displayed by
FAGLB03.Only the balance of open items
can be displayed.
How can we display all line items of a
G/L account in year 2007?
Thanks in advance and kind regards,
Gökçen.Hi Elena,
This is a very complex area. You need to check the following notes:
1070629 - FAQs: Migration to General Ledger Accounting (new)
1014364 - New G/L migration: Information, prerequisites, performance
You may also have to contact SAP Migration Services
[email protected]
Regards,
Ravi
Maybe you are looking for
-
Can't use Airplay after 7.0.2 ATV 3 update!!
I can't use Airplay at all on my upgraded 7.0.2 ATV3. No audio and no video. I can have the picture up and running on the iPad Air 2 or iPhone 6 and try to send it to the ATV 3. I get an "unable to send video" warning on the unit sending the airplay
-
How do you get rid of 'empty' pre-roll time in logic pro 9?
how do you get rid of the pre-roll time in logic pro 9? My project's start time is 8-bars before any material, or tempos, or anything... Can't move the start time back to ")" (zero) STUCK!! at -8 The song now has 20 seconds of dead air time i
-
I'm working a project which basically involves producing a diff of 2 XML files. I recently discovered XDK and though that this would be the best way to do this. However, after I implemented the XDK solution, I found that it makes a distinction betwee
-
Can't play music from Universal Dock when iPod classic plugged in
According to the iPod classic manual, one can play music or video while the iPod is connected to the computer or AC power to be charged up. However, this is not working for me. Instead, it says "Connected", and won't actually let me play music unless
-
BPEL migration, SCM, and BPEL builds
We've got 10.1.2.0.1 bpel sources in SCM and want to migrate them (without too much overhead) to 10.1.3.1. We frequently encounter the build warning for newly migrated projects: Warning: bpel.xml file not found at <project dir>\bpel\bpel. Not sure wh