No systems found in /tmwflow/cmsconf

Hi,
I have included a 4 system landscape DEV -> QAS -> PPR -> PRD in my Maintenance project. Activated Change request Management.
Created Maitenance Cycle.
CTS was configured successfuly.
I could see all green messages in /tmwflow/charmchk
Created Trusted RFCs as well.
But I could not see my system under System Change Options in /tmwflow/cmsconf. Contradicting this, I could see my system under Critical Objects in /tmwflow/cmsconf.
Really wondering what am I missing.
Any pointings will definitely be rewared. Please help.
--Ragu

Hi,
maybe a job is missing.
Try report /TMWFLOW/CONFIG_BATCH_GET to fix this manually or schedule job /TMWFLOW/CONFIG_BATCH_GET
see: http://help.sap.com/saphelp_sm40/helpdata/EN/d1/489ba9e6a94a508aee01797d06f912/frameset.htm
regards
Andy

Similar Messages

Systems missing in /TMWFLOW/CMSCONF

Hi Experts,
We have configured ChaRM in solution manager for several landscapes(PI,BI,CRM,SRM..etc). We now want to activate CSOL and unable to see few systems in /TMWFLOW/CMSCONF.
Example my PI Landscape is :T11, A11, P11. i am able to see T11 but not A11 and P11. similar is heh case with BI landscape too.if anybody has encountered this issue and has solution, please help
Appreciate your quick help
Anand

Hi,
You missed some more config steps, pls follow the christian guidlelines as stated below
[Specifying Critical Transport Objects under Change Management Extend config|Specifying Critical Transport Objects under Change Management Extend config]
[No system listed in /TMWFLOW/CMSCONFIG|No system listed in /TMWFLOW/CMSCONFIG]
let us knw once you checked.
Jansi

/n/TMWFLOW/CMSCONF lists no systems

Hi,
I have configured STMS and other CHARM related activities.
When I execute above tcode, no system is listed for CSOL.
solman7.1SP04
per your experience, what is missing?
Thanks a lot!

Hi,
Try to execute report /TMWFLOW/CONFIG_BATCH_GET in se38 and check if you get list of systems in /n/TMWFLOW/CMSCONF .
Regards,
Archana

Re: /n/tmwflow/cmsconf - how to find tcode central configuration

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

Re:/tmwflow/cmsconf transaction - scheduling and distribution routes hided

Hi gurus,
Iam configuring the ChaRM for this i have done the IMG,TMS all the activities but i can t find the systems in the /tmwflow/cmsconf transaction. The distribution button and the sceduling button are hided ,how to enable it !
solutions awarded for sure!
regards,
esr kumar

Hi,
Please kindly ensure that the IMG has been configured correctly especially in the perspective for ChaRM;
SAP Solution Manager
- Advanced Configuration
   -Scenario-Specific Settings
     -Change Request Management
       -Standard Configuration
         -Transport Management System
Extended Configuration is for the purpose, if you need to specify
Critical Transport Objects, or Reproting Service. But before coming to
this part, the standard configuration has to be completed and working.
Hope this helps.
Cheers
SH

/TMWFLOW/CMSCONF - Unable to see overview of systems

Hi
I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
Are these two issue related?
Regards
SN

Hi
Yes I have created the project as "Internal Maintenance Project".
The problems that I see are:
1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
Is there any Configuration in SPRO to be done?
Regards
SN

/n/tmwflow/cmsconf

Hi,
In Transaction '/n/tmwflow/cmsconf' i am only getting two tabs
1)System Change Option &
2)Critical Objects.
I believe it should have someother tab like General Settings,Distribution Routes & Project structure.
Why its missing here.I am on Solution manager 4 with latest SP's.
Regards,
Cherry

Hi All,
Any solution for this error, I am also getting same error
I have activated Change request management, It refresh successfully, But when i create New Maintenance Cycle it gives 'Solution Manager and Change Request
Management are not consistent'.
SLG1 Error
1) Message no. /TMWFLOW/TASKLIST139
Diagnosis
The task list could not be created correctly. Other messages are in the Application Log, which you can reach as follows:
with the 'Messages about Changes' (next to the 'Display/Change...' radio button ) or 'Creation Messages' (next to the 'Create...' radio button) pushbutton, in the Maintenance Cycle and Projects tabs, in the Environment -> Scheduling menu, in the /TMWFLOW/CMSCONF transaction.
with the transaction SLG1, object /TMWFLOW/CMSCV
2) Message no. /TMWFLOW/TASKLIST145
Diagnosis
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project TESTPJ are different.
System Response
The system does not allow you to complete the task list.
Procedure
Go to the central configuration tool of Change Request Management and synchronize the configuration.
3) I have checked the application log from /n/tmwflow/charmchk and found no error

No consolidation system found for SID in solman

Dear All
I am configuring Change Request Management is Solution manager EHP1
I have created required Domain Link in Solman and satellite (dev) system
And it is working fine
When I am creating project in System LandscapeChange Request under
Project Landscape, Activate Change Request Management tick
It gives me following error when I click on Check button
Error:-     No consolidation system found for SID-300 (project SOLMAN_CON)
Error:-      No track for project SOLMAN_CON with log. System SID/300
Error:- Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for SID-300
Pl suggest
Regards
Gopal

Hi,
My Transport route looks something like
[System GND] ZGND > 300 [System GNQ] 300> 300 [System GNP]
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan

Tab missing in Transaction /n/TMWFLOW/CMSCONF

We have upgraded our SMR 3.2 to SMR 4.0, in SMR 3.2 i can able to see the tab named "Distribution Routes" using /TMWFLOW/CMSCONF transaction.when i used the same t-code SMR 4.0 , i can only able to see System Change Options and Critical objects,Other tabs are not in visible mode ??? how can we retrive the same tab . or else is there any other t-code for Distribution routes ???? guide me ..
im struck up while following the SPRO settings in ChaRM.Send me is there any step by step weblogs are available ???

Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha.

Transaction /n/TMWFLOW/CMSCONF

Hello!
If I execute the Tcode /n/TMWFLOW/CMSCONF I can see the projects created in tcode "SOLAR_PROJECT_ADMIN" but there are red.
Is there some activation steps to do it?
Other issue:
I have SOLMAN 4.0 and can see only two tabs, but not the tabs like "Distribution routes", etc.
Are these tabs only by SOLMAN 3.2?
<b>Is there some configuration guide or .sim-file describing the usage of Change Request Management?</b>
Thank you!
regards

Hey Thom,
Issue 1).
In SOLAR_PROJ_ADMIN, the reason you get those red icons because settings which are maintained are not as recemmended by SAP,
For e.g
if you define a Production sytem in your project landscape, then Cross-client changes are NOT permitted, however its permitted if it were a Development system.
Just click on the red icon and then on your right, you will see the tab where you get know what went wrong and correct it if neccssary.
Issue 2)
With Solman 4.0 distribution routes tabs are not present.
There are *.sim files and configuration available for Change request management in sap marketplace, but they are valid only for SOLMAN 3.2.
This is where you get them.
<a href="https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&">https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000633637&</a>
Just click on Techincal or functional roles on your right and there you get everthing.
For SOLMAN 4.0, there are no config guide or SIM files available yet.
Please Reward for usefull post and close this thread if your problem is solved
Regards,
Anand.

/tmwflow/cmsconf

We are implementig ChaRM and we have the following situation:
Some domain control are configured in production systems and other in
development systems.
Only the systems that are domain control in development system appear
correctly in /tmwflow/cmsconf transaction and is possible set up
"project assignment" to mandatory. When the domain control is in the
production system is not possible set up this. In change Attribute
definition screen, only productions clients appears.
When we change the domain control to development system, this problem
doesn't occurs.
Is mandatory that domain control to be in development systems? I have
system that is better domain control in production system.

Hi,
Do you have a domain link between SOLMAN domain contoller with the other domain controllers?
What does /TMWFLOW/CHARMCHK say?
Feel free to revert back.
--Ragu

Error when creating Task List: No Consolidation System found

All-
Configuring my Retrofit Scenario. My Project Landscape is maintained as following:
Dev(100) --> QA (200) --> Prod (300) with Retrofit (XXX)
Dev(XXX) --> QA 250
I am getting this error when I try to refresh the project or create a Task List
*No consolidation system found for <SID>-250 (project RETROFIT3)
Message no. /TMWFLOW/TRACK_N806*
If my QA client (250) is already maintained as a QA logical component. What else is missing?

Hi,
I have done something similar and getting error /TMWFLOW/TRACK_N806
My Transport route looks something like
System GND ZGND > 300 System GNQ 300> 300 System GNP
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan

Error in Solar02 " Error - No system found for component SAP LEARNING.....

Hi,
I have selected the Business repository from the Tcode Solar01c, and i can see the list of configuration under Business Scenario,
when i am trying to execute any Tcode,(My understanding is that this Tcode must execute in Development system) it gives the following Error,
" No system Found for Component SAP Learning Solution and Role Evaluation system in project ZPROJ.
In SMSY i have created Two systems Dev :100 and Qas:300 Which are assigned to one logical component whose producted Version in SAP ERP.
Please advise by reviewing above scenario.
Regards,
SM

Hi Irfanl,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps,
-Rohan

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

/TMWFLOW/CMSCONF error

Dear All
Upon executing transaction /TMWFLOW/CMSCONF, I am encountering the following error:
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          10.11.2009 15:00:57
Short text
Error when importing object "GS_SYST".
What happened?
Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/SAPLCONFIG_SERVICES" had to be terminated
      because it has
come across a statement that unfortunately cannot be executed.
Can somebody help me out ??
Regards
Bilal Nazir

Is nobody aware of this error ???
Here is the error analysis !
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "/TMWFLOW/ONE_SYSTEM_CHANGE_GET" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "GS_SYST", the structure did not match the
structure of the target object. The error occurred in component
no. 55.

No systems found in /tmwflow/cmsconf

Similar Messages

Maybe you are looking for