No systems visible in E2E analysis

Hi Expert,
I have configured root cause analysis and it work fine wit user admin (profile sap_all).
Now I have created a new user called "support" with these roles:
- SAP_SOLMANDIAG_SAPSUPPORT
- SAP_DBA_DISP
- SAP_OP_DSWP_BPM
- SAP_OP_DSWP_CSA
- SAP_OP_DSWP_EWA
- SAP_OP_DSWP_SM
- SAP_RCA_DISP
- SAP_RCA_EXE
- SAP_SM_USER_ADMIN
- SAP_SMWORK_DIAG
With this user if I go to solman_workcenter ->root cause analysis->End-To-End Analysis I can't see any systems under "system id" column instead with user solman_admin I can see all systems.
Can anyone tell me how resolve this issue?
In security guide there aren't other relvant role for this scenario..
thanks
gio'
Steps for Reconstruction
solman_workcenter ->root cause analysis->End-To-End Analysis I can't see
any systems under "system id" column.

Hello Giovanni,
Can you kindly review/implement the following SAP Note to see if it resolves your issue:
1170859 SMD_RFC: running RCA without SAP_ALL profile
Thanks,
Mark

Similar Messages

Getting an error in E2E analysis

Hi,
In E2E analysis we are getting an error: The system you selected do not contain any software component currently supported by E2E Analysis.
Thanks
Shail

Hi Rajeev
this is java sever and getting an error in worklad analysis.
componets are :
ADSSAP     7.01     5     ADOBE DOCUMENT SERVICES 7.01
BASETABLES     7.01     5     J2EE ENGINE BASE TABLES 7.01
BI_MMR     7.01     5     BI META MODEL REPOSITORY 7.01
BI_UDI     7.01     5     BI UDI 7.01
CAF     7.01     5     SAP CAF 7.01
CAF-UM     7.01     5     SAP CAF-UM 7.01
CORE-TOOLS     7.01     5     J2EE ENGINE CORE TOOLS 7.01
DI_CBS     7.01     5     DI COMPONENT BUILD SERVER 7.01
DI_CMS     7.01     5     DI CHANGE MGMT. SERVER 7.01
DI_DTR     7.01     5     DI DESIGN TIME REPOSITORY 7.01
JLOGVIEW     7.01     5     JAVA LOG VIEWER 7.01
JSPM     7.01     5     JAVA SP MANAGER 7.01
KM-KW_JIKS     7.01     5     SAP_IKS_7.01
JLOGVIEW     7.01     5     JAVA LOG VIEWER 7.01
JSPM     7.01     5     JAVA SP MANAGER 7.01
KM-KW_JIKS     7.01     5     SAP_IKS_7.01
LM-TOOLS     7.01     5     LIFECYCLE MGMT TOOLS 7.01
SAP-JEE     7.01     5     SAP J2EE ENGINE 7.01
SAP-JEECOR     7.01     5     SAP J2EE ENGINE CORE 7.01
SAP_JTECHF     7.01     5     SAP TECH S OFFLINE 7.01
SAP_JTECHS     7.01     5     SAP JAVA TECH SERVICES 7.01
SWLIFECYCL     7.01     5     SOFTWARE LIFECYCLE 7.01
UMEADMIN     7.01     5     UME ADMINISTRATION 7.01
Pleasse advise us.
Thanks
Shail

In solman_workcenter - RCE- E2E analysis tabs change,trace is not appering

Hi,
Initisaled EHp1 and done initial and basic configuration using Transaction SOLMAN_SETUP successfully.
SMD + wily installed succeesfully in satellite system system
I can see the satellite system data in Introscope Webview
Extractor Framework jobs are running fine.
But In Solution manager, in transaction Solman_Workcenter->root cause analysis->E2E Analysis i am not getting Workload Analysis, Change Analysis and exception analysis tabs.
just i am getting systems in E2E analysis. why above tabs are not showing
besides standard View there is no tabs.
Regards,
AR

Hi Jagan,
Now i am able to see the worload,trace analysis tabs .. but under workload,trace analysis etc no data is showing.
1) under workload analysis -> P07 Enterprise portal ->J2ee
it's saying that no applicaqtion data found and for some tabs empty (just white) screen is showing and for some tabs it's
2)under workload analysis -> P07 Enterprise portal ->Host
giving Error loading template 0TPL_0SMD_MPEH_WA_Q0018_H for host tab
I am able to see only one graph i.e under workload analysis -> overview.
Best Regards,
AR

No data in Workload Analysis overview in E2E Analysis for TREX

Hi,
I'm not getting any data in E2e Workload analysis Overview screen for TREX system. Data is available in all other screens and extractors are running fine. I'm using Solution Manager 7.1 SP10. Kindly help me.
Regards,
Pragadees

Hi Pragadeesh,
Your system landscape definition in SMSY seems to be wrong. The products selected at the Setup Wizard for the managed system must exist in SMSY in order to run the extractos correctly.
Please refer to the Root Cause Analysis Landscape Guide available
at http://service.sap.com/diagnostics -> media library for additional information.
1) Upgrade CIM model according to note 669669.
2) Download the latest version of note 1468591 and apply it using SNOTE
3) Check note 1259109, download the latest configuration file and apply it
Additionally, it is highly recommended to patch your LM-SERVICE SP09
with the latest patch (1) according to note 1599627.
Thanks
Vikram

Logistics Information System-Sales price conditions Analysis -(konv-KSCHL)

Hi All,
It,s possible make sales price conditions analysis with Logistics Information System (LO-LIS) -table konv for sd sales?
Has anyone done something similar? (Sum the value of conditions by period of sd sales)
Thanks, Carlos Duarte

Hi,
Please check whether the entries maintain in LIS update or not?
Path:
SPRO --> IMG --> Logistics-General -->Logistics Information System --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Update Group
--> Assign Update Gropu at Header Level
Maintain following data, sperately in two rows:
Sales Org: say,1234
DstCh:
Division:
Customer Statistic Group: +
Statistics group for sales document type: 1
and
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Statistics group for sales document type: 2
SPRO --> IMG --> Logistics-General -->Logistics Information System --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Update Group
--> Assign Update Group at Item Level
Maintain following data, sperately in two rows:
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Material Statistic Group: 1
Statistics group for sales document type: 1
Statistics group for the item category: 1
and
Sales Org:
DstCh:
Division:
Customer Statistic Group: +
Material Statistic Group: 1
Statistics group for sales document type: 2
Statistics group for the item category: 2
Best Regards,
Amit.
Note: Once, you will maintain Settings for LIS-Update, it will update onwards transactions and will not update for already done transactions.

Make Business systems visible within SAP PI Tools

Hi!
I defined technical system and business system as well within SLD. Now I would like to see this business system within SAP PI tools (such as Integration Builder).
Question:
Which actions are requiered after the definition the technical and business system in order to work with these systems in SAP PI tools?
Is thers some documents describing this issue?
Thank you!

Hi,
The order for without party is simple, just import it, then
1. Create configuration scenario
2. Assign this system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
And for with party.
1. Create Party in Integration Directory
2. Assign business system to this party
Now when you create your scenario
1. Create configuration scenario
2. Assign this party and system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
>>- Creation of Party
First
>>- Creation of Business component
Second
>>- Creation of Scenario
Third
>>- Assign Business system
Fourth
Hope now it is clarified.
Regards
Suraj
Edited by: S.R.Suraj on Oct 1, 2009 4:33 AM

Revenue is not visible within results analysis

Hi Experts,
Am SD consultant , am not ware of about KKAK transaction and can you please throw ur ideas on below issue.
In Tcode- KKAK Actual result analysis for the sales order , revenue is not visable with in result analysis for sales order.
Can you please give your suggestion how can it get update tehre.
And also let me know this KkAK transaction details can see after creation of billing document or before billing document creation

The show interface command should give you a lot of details on the link usage.
You could watch the load, 5 minute input rate/output rate fields before compression and after compression to find
the realistic usage.
I am pasting a sample show interface output below
Router#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
Internet address is 192.168.100.2/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation HDLC, loopback not set, keepalive set (10 sec)
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 13:32:47
Input queue: 1/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/2/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 3000 bits/sec, 4 packets/sec
5 minute output rate 2000 bits/sec, 4 packets/sec
98631 packets input, 8680095 bytes, 0 no buffer
Received 30857 broadcasts, 0 runts, 0 giants, 0 throttles
2 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
98332 packets output, 8924943 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up

System Performance Modelling: Performance analysis results CSV interpretation

Hi,
I would like to know how to reproduce the graphs that the SDK produces for PS and PL performance. The SDK dumps a CSV at the end of an analysis run, but I am having trouble working out the Excel algorithms that will replicate the graph the SDK shows. I'd like to be able to have copies of the graphs that I can interrogate retrospectively, rather than having to re-run the tests to get the numbers out.
I think I have worked out the excel calculations to give me the raw numbers for PL average latency and transactions graphs, but am struggling to replicate the throughput graph. I am also having problems replicating the PS graphs.
I've read UG1145 and the associated app note XAPP1219, but there is no mention of how to interpret the csv file to get the same numbers that are presented in the SDK.
Any help appreciated.
Regards,
Rich

I forgot to add: I'm using version 2015.1 of the SDK

Error reading table TOBJ - System Error when accessing Analysis of Change Requests

Hi Experts,
When I am trying to access Status Report or Processing time I get the following errors:
Error reading Table TOBJ - system error, An error occurred when getting data from the
processor and Log not found (in main memory).
I am not sure how this table gets populated or how to check for inconsistencies.
We have already checked the patch levels and they are on the same level for all environments.
We never had these errors in our Dev and Qa environments. We recently got a new TREX environment, could that be causing any of these errors.
Any ideas how to troubleshoot this problem?
Thanks
Riaan

For info. The problem was revolved with 2 notes.
1668882 and then apply the NWBC runtime 1963267.

BIAC in portal - only analysis pattern visible

Hi,
I'm running BI Administration Cockpit in Portal, implemented as described in SAP Note 934848 Collective note: (FAQ) BI Administration Cockpit.
However, although all implementation steps completed the monitoring queries cannot run in Portal. The system return only the analysis pattern with all the buttons, without the actual query.
The query can be run in preview mode directly from portal content, so connection should be ok. Also authorizations cross checked.
The analysis pattern is used as default for normal reporting so it cannot be inactivated.
Any idea where's the problem and how to solve/work around it?
Also, is there a possibility to migrate the SAP delivery 3.x web templates to 7.0 version? I'd rather keep 7.0 objects only active in the system.
Thanks!
Aki

Hi:
I had the same problem, I fixed it with the parameter ms/redirect_version = 1.
You can see the note 972514.
You must configure the message server of the ABAP Web Application Server in such a way that it uses HTTP return code 307 (temporary redirect - for HTTP 1.1) instead of HTTP return codes 301 (moved temporarily; use new URL) or 302 (moved temporarily; use same URL).
Most Web browsers (such as MS Internet Explorer and Mozilla Firefox) interpret this in such a way that they send the POST parameters to the server that is the target of the HTTP redirect. Note that the use of HTTP 1.1 for the Web browser is mandatory because return code 307 is available only as of version HTTP 1.1.
Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application Server.
I hope help you.

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

E2E BI HOUSEKEEPING

Hello,
In our solman 7.1 system the job E2E BI HOUSEKEEPING finished but the spool has different errors & there st22 dumps too.
Found this note 1844955 but my question is :
1. We have not been using End to End analysis tab in solman workcenter tcode -> root cause analysis so is this job still necessary to run in solman ?
2. If not, its been running for a while what would be the affect of un-scheduling the job now ?
3. Do I have to carry out any steps to check if doesn't affect any steps in solman or connected systems ?
Spool Errors :
Target Infocube: 0DB4_C04D
Source Infocube: 0DB4_C04H
Destination    : NONE
Aggregator     :
E2E_HK_AGGREGATE_MDX
Delta          :         90
HK: Calling SMD_HOUSEKEEPER at NONE
HK: Cube aggregation: SMD_HK_AGGREGATE_MDX
HK: Error detected by SMD_HK_AGGREGATE_MDX
HK: Status :     3-
HK: Message:
Target 0DB4_C04D does not exist
Runtime [s]:   0
Target Infocube: 0ORA_C03D
Source Infocube: 0ORA_C03H
Destination    : NONE
Aggregator     :
E2E_HK_AGGREGATE_MDX
Delta          :         90
HK: Calling SMD_HOUSEKEEPER at NONE
HK: Cube aggregation: SMD_HK_AGGREGATE_MDX
System Failure:
Time limit exceeded.
Runtime [s]:      17.985
ST22 ( two dumps)
Category
ABAP Programming Error
Runtime Errors
DBIF_RSQL_TABLE_UNKNOWN
ABAP Program
SAPLRSDRD
Application Component BW-BEX-OT
Date and Time
03/19/2014 05:31:31
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSDRD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "/BI0/F0ORA_C02D" or another table accessed in the
statement.
Category
ABAP Programming Error
Runtime Errors
TIME_OUT
ABAP Program
SAPLRSDRD
Application Component BW-BEX-OT
Date and Time
03/19/2014 05:30:23
Short text
Time limit exceeded.
What happened?
The program "SAPLRSDRD" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Thanks
Shradha

Hi Shradha,
E2E BI HOUSEKEEPING is must run job in solution manager. it is actually needed for your BI house cleaning.
1. We have not been using End to End analysis tab in solman workcenter tcode -> root cause analysis so is this job still necessary to run in solman ?
In 7.1, there is no dedicated guided concept for RCA, if you have done managed system configuration iteself, most of the extractors were active for the system, the data collection and storing to BI has started. You must have this housekeeping job. Recently solution manager has UPL integration too. All these features would go long term if you have proper housekeeping activity scheduled. hence please make this job running without fail.
2. If not, its been running for a while what would be the affect of un-scheduling the job now ?
3. Do I have to carry out any steps to check if doesn't affect any steps in solman or connected systems ?
This is the independent job, will not affect any other scheduled jobs.
Refer my blog How Is The Health Of Your SAP Solution Manager BI Content? and the sap note 1480588 - ST: E2E Diagnostics - BI Housekeeping - Information
Please check
Thanks
Jansi

BRAIN 605 when calling Workload analysis in Solman 4.0 EHP1

Hello!
I am running an solution Manager system with release 4.0 EHP1 (brandnew).
I have the problem that some BI functionalities on the SMD do not work correctly.
´For example I am calling the following application:
E2E Analysis -> select a system -> klick on workload analysis -> chose the second tab Application Server ABAP. Here for example in the workload summary I get the folloing eror message:
Technical Information for Message:
The requested query 0CCMSMTPH/0CCMSMTPH_WA_Q0001_H does not exist on the current server
Notification Number BRAIN 605
Other queries like for example the User load are working. Does someone have an explanation? How can I check if the query really is not existing of if it has a problem?
Regards
Bernd

done- I had to run the report CCMSBI_SETUP_E2E, CCMSBISETUP is not enough

Logical System is not appearing in Informer tab to check SOD's

Hi GRC Experts,
I have an issue with logical system to run risk analysis.
I created logical system by following the Config guide, added physical system and generated rules (RAR Configuration>>Logical Systems>>Generate Rule) for that logical system.
I haven't generated rules for the physical system (RAR Config>>Rule Upload>>Generate Rules) since I dont want more rules to be displayed in the reports.
However I do not see logical system as an option in Risk Analysis (informer Tab) and Config>>Schedule background job for BAtch Risk Analysis>> under system as well.
It would be great if any one advice me on this.
Regards,

Thanks Chinmaya,
Yes you are right, I confirmed with a friend (my ex-GRC colleague) of mine as well.
can't execute sod checks on a logical system - logical systems are only intended to eliminate the need to add the same rule set over and over for the same types of systems
Regards,
Ramesh K

Runtime error while activating LO Datasource in Source System

Hi Gurus,
I have followed the below steps to activate the SD related LO extractor in ECC
1. RSA5 --> Select all the 2LIS_11,12&13 data source and activate
2. LBWE --> Choose the 2LIS_11,12&13 data source and activate.
Upon execution of the second step , the system return me the following runtime error
Runtime Errors         DDIC_TYPE_INCONSISTENCY
Date and Time          07.07.2011 10:14:29
Short text
     Inconsistency in the Dictionary for the structure "MCQALSB".
What happened?
     Error in the SAP kernel.
     The current ABAP "SAPLMCEX" program had to be terminated because the
     ABAP processor detected an internal system error.
Error analysis
     There is an internal system error.
     eliminated with ABAP/4.
Trigger Location of Runtime Error
     Program                                 SAPLMCEX
     Include                                 LMCEX$04
     Row                                     26
With this error i cant proceed to activate any of the LO data source
Please help
Thanks in advance

The table MCQALSB need to be activated in SE11 and LBWE works fine

No systems visible in E2E analysis

Similar Messages

Maybe you are looking for