NO TAB FOR REASON FOR REVERSAL OF GOODS
Dear Sir,
My user is in MIGO -CODE he wants to cancel a material doc --by mvmt - type 202, he says where he should enter the reason. as i had gone through this MIGO -- DOC. NO entered & executed the process, but in " WHERE " tab -- the tab for reason for reverse mvmt is not appearing --.Kindlly
clarify .
km
Hi
202 reversal of Goods receipt for a cost center
again it is a reversal which will not required any reason
if u are returning partial qty or full qty of material to vendor for reasons like bad quality etc. usualy we do it with Return Movements for which Resons for returning are compulsary and not for Movement reversal
Vishal...
Similar Messages
-
How to add new tab after reason for rejection tab using tcode va01
Hello,
how to add new tab after reason for rejection tab using tcode va01.Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM -
How add new tab after reason for rejection tab using tcode va01
Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal. -
J1INQEFILE (FLAG for reason for Non-deduction/ lower deduction)
This refers to the E-TDS return challan format. As per the new format we have to show additional column showing FLAG for reason for Non-deduction/ lower deduction.
Is there any patch / solution / SNOTE from SAP?
It is related to J1INQEFILE.
Transaction where tax not been deducted as amount paid/credited to the vendor/party has not exceeded the threshold limit (as per the provisions of income tax act). Applicable for sections 193,194, 194A, 194B, 194BB, 194C, 194D, 194EE, 194G, 194H, 194I, 194J, 194LAHi ,
Refer to OSS note no. 1442113 - Legal Change October 2010 - ETDS / TCS file format change.
It has the symptoms as well as the solutions for the issue .
Cheers ,
Dewang -
Short dump while marking Sales order Line item for Reason for rejection
Hi All,
Need your help in the following regards.
In system Client is creating a sales order with 100+ line items and for each line item a project gets created automatically at the background as it is a make to order senario. Now what is happening is customer suddenly call's and tells to stop few line items tempororily till he gives go-ahead, so our client is marking it for reason for rejection, while doing this the network created for a project is getting deleted. Once we receive conformation for that line item agin to proceed we are removing the reason for rejection and it was suppose to create a new network, but system is taking huge time to do this and going for a shout dump saying time-out error, in few cases it is creating the network.
Need your valuable inputs how we can address this issue to avoid the short dump. We have increased the buffer time to 30min also.
Thanks
regards
kishoreHi,
You can easily list out sales order that have been assigned reason for rejection..simple extract of table VBAP-ABGRU = not blank.
This report should list out the sales order number along with some more details, as required.
Now the report should allow to choose the documents i.e. like giving checkboxes in the left most side and once the user chooses the sales documents he wants to get processed--> the program should call change Sales Order FM or BAPI. Execute this in background.
Regards,
Raghu. -
Table name for reason for action
Hi Experts
Can anyone tell me the table name which stores the reason for action codes?
Ineed to change them
SM30
T530
Edited by: Sikindar on Mar 9, 2010 11:46 AMTable - T530, execute via se16
View - V_T530, execute via sm35 -
How add new tab after reason for rejection tab using tcode va01 using badi
I want to add new tab in va01 using badi. I search badi -> badi_sd_update_plval at the time of implementation it ask about access key.
which is suitable badi for va01 enhancement.
Any screen exit is available for this enhancement.You need to implement BADI through SE19. Refer below link for details
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Hope this helps.. -
Transaction for Partial (602)reversal of goods issue (601) quantity?
Dear friends,
I am trying to reverse the 601 goods issue through cancellation with reference (601) document in MB1A transaction, but it is giving the error and it is not allowing me to reverse,
In VL09 there is possibility of reversing the entire document, but my requirement is i need to reverse partial quantity out of the issued quantity through 601.
Regards,
Archuhi archu,
please refer below link
Reverse PGI with partial quantity
regards
vijju -
Can You do a Firmware or Bios upgrade on a Blackberry 9550 - See below for Reason for this Question
I have a Blackberry Storm2 9550 (Verizon) using a Consumer Cellar Sim card.
I am on vacation in Iowa and Phone Suddenly started to give a "Congestion" error with EVERY Incoming or Outgoing Call. I first assumed "Towers" were busy, but dismissed this as it happened for 2 Hours straight. Here in Cedar Rapids, Population of 140,00+ I am surrounded by 50+ towers.
Discovered that by Powering Down, Removing Battery, Booting up it would work Each and Every time, for a few minutes only, Then "Congestion" error AGAIN. I have taken phone to Verizon dealer and since I don't have Their Plan, They Immediately hand Phone back. I have called every Electronics dealer in this area with NO luck...I believe I NEED a Firmware Update or a Bios Flash, But No One local, can help Me. This Phone has worked FLAWLESSLY for 2 Yrs - I loved this Phone up until a few days ago.. Any Help GREATLY Appreciated... Thank You - > Dan <hi Brian
which version of InDesign you have ?
I have checked these steps on CS3 and CS4:
first I've set ON to option in preferences to preserve links when placing
then I've placed DOC file as AnchoredTF in new Story
then I've copied this AnchoredTF and pasted it on page, and then I've pasted it as another AnchoredTF - each time there was new lick created to the same DOC file
then I've set OFF to option in preferences to preserve links when placing
and even when I again copied and pasted this AnchoredTF with placed DOC file - it still add new link on Links palette
so maybe with InCopy stories there is next bug or next "feature" ...
[edit]
ok - I've checked InCopy file - after exporting TextFrame as InCopy Story
and it's like you've said - pasting on page - new link is created - pasting as Anchored - link isn't created ... no matter if option in preferences is set or not ...
verdict - we've found new bug
BUT ... if you link it again - by CTRL+D method - link is preserved even if option in preferences is set to off so you can have more than one InCopy Story placed as AnchoredTF in same parent Story ...
robin
www.adobescripts.co.uk -
Field "Reason for change" mindatroy in PO under "Version" tabe ?
Hello Exp.,
Is there any EXIT or BADI available to make "Reason for change" mandatory while changing PO in ME22N tcode.
In SPRO, is there any standard location where we can make this field mandatory? .
Input and suggestion is highly appreciable.
Regards
SanjayDear sir,
go to SPRO-IMG-Materials Management-Purchasing-Version Management-Set Up Version Management for External Purchasing Documents.
select your document type for which you want to make the required entry reason for change. and click details indicator(CtrlshiftF2). and in field selection Reason field make the Required entry.
then when u r changing PO the system will ask required entry for reason for change.
regards
jrp -
Dear all
I have a Query regarding Stock Posting MB1C when i am Trying To post the Stock With 561 movement type its asking for Reason For Movement How to remove this or Hide this With Out Asking Please help me
with Regards
PushpalasDear All
Thanks for Replying Me But I Did All the Things The Same Error is Coming
Fill in all required entry fields
Message no. 00055
Diagnosis
You have attempted to update data or start an action. However, not all required information was specified.
System Response
The system could not execute the action.
Procedure
Enter all required information. Fields in which you must enter data are prefilled with a checkmark or question mark ("?") by the system. If the current screen contains tabs, check all tabs to make sure you have filled in all required fields. Then restart the action.
with Regards
pushpalas -
Standard PNP selection screen problem in reason for action type
Hi all,
We have used standard PNP in one of our report program.
The input for 'Reason for Action' (excluding a particular reason for action ) has no effect on the actual selection of data from the PNP. i.e. even if a particular reason for action is excluded in the selection, record pertaining to that action for reason is still picked in the PNP selection and passed on to the program through Get PERNR statement.
The above problem seems to affect all the standard and custom HR Reports as well.
Please advise on how exactly the excluding of a particular reason for action work in selection through PNP and is there anyway to solve the problem.
eagerly waiting for your response.
Thanking You,
Regards.
DeepakThanks for your response,
We tried but it did not work.
Our code is as follows,
INITIALIZATION.
W_REPID = SY-REPID.
PERFORM CREATE_RANGES.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0000 SPACE PN-BEGDA PN-ENDDA.
PERFORM GET_DATA.
END-OF-SELECTION
If you could give us your email id, we would email the screen shots of the selection screen and the output.
my email id - [email protected]
Thanking You,
Regards
Deepak -
Hi Guys,
Is there a Customizing Object for 'Reason for Rejection' to replicate rejection codes from ECC6 to CRM?
Thanks,
KenHi Gurus!,
Please could you advice how resolve this issue.
I have ERP Sales quotation in SAP CRM, but the field of reason for rejection is not populated by item and header level.
Thanks for your support.
Best Regards!. -
Reason for Movements for selected movement type in MB1A/B/C
All,
When a user goes to MB1A, MB1B, MB1C and selects a movement type is there a way to show only the reasons for movements for that selected movement type?
Currenlty, when the users clicks F4 or wants to view the options available for reasons for movements, it shows them EVERYONE movement type and its associated reason for movement. The list is HUGE. So, I want to know to shorten the list to show only the applicable ones for the movement type the user has selected.
I know the user can enter the movement type and the list gets filtered but this is a manual step the user must perform. Is there any way the system can restrict the reasons for movements based off the Movement Type already selected by the user?
Please let me know how to show only those reason codes for the selected movement type in transactions MB1A, MB1B, and MB1C.
Thanks for your help in advance!To shorten the list you can select the movemnt types the user requirs and make his/her personal list so when he.she do f4 onlt personal list will be displaed.
U can create personal list by doing the F4 and put cursor on movement type and below will be icon to add into personal list.after selecting all the movement types. close the window and adain do f4 u will only see the entries of u r personal list. -
Text while entering reason for movement
Dear all
When we are doing rejection say 10 out of 50 , then it is asking for reason for movement ..and also the text to be entered
i want to know which table this text will be populated ,
Emergency
thanks in advanceHi dear
Thanks for the reply , but i am bit confused , here you are passing qave to structutere field , but this ia table (QAVE)
this is my code
SELECT * FROM zs_mkpf_mseg
INTO CORRESPONDING FIELDS OF TABLE itmseg
WHERE lifnr IN p_lifnr
AND matnr IN s_matnr
AND budat IN s_budat
AND werks IN s_werks
AND bwart IN ('101','102','122','123')
AND lifnr NOT IN (' ').
SELECT * FROM qals
INTO CORRESPONDING FIELDS OF TABLE it_qals
FOR ALL ENTRIES IN itab
WHERE mblnr = itab-mblnr
AND lifnr = itab-lifnr.
AND ebelp = itab-ebelp.
SELECT * FROM qave
into itab-vbewertung
INTO CORRESPONDING FIELDS OF TABLE it_qave
FOR ALL ENTRIES IN it_qals
WHERE prueflos = it_qals-prueflos.
LOOP AT itab.
READ TABLE it_qals WITH KEY mblnr = itab-mblnr
ebeln = itab-ebeln
ebelp = itab-ebelp.
matnr = itab-matnr.
IF sy-subrc = '0'.
MOVE it_qals-prueflos TO itab-prueflos.
MOVE it_qals-ersteldat TO itab-ersteldat.
MOVE it_qals-lmengeist TO itab-actual.
MOVE it_qals-lmenge07 TO itab-inward.
MOVE it_qals-lmenge01 TO itab-return.
ENDIF.
READ TABLE it_qave WITH KEY prueflos = it_qals-prueflos .
IF sy-subrc = '0'.
MOVE it_qave-vbewertung TO itab-vbewertung.
ENDIF.
SELECT SINGLE name1 ktokk
FROM lfa1
INTO CORRESPONDING FIELDS OF itab
WHERE lifnr = itab-lifnr.
SELECT SINGLE mtart matkl
INTO (itab-mtart , itab-matkl)
FROM mara
WHERE matnr = itab-matnr.
MODIFY itab TRANSPORTING name1 ktokk mtart matkl prueflos ersteldat actual inward return vbewertung.
CLEAR itab.
ENDLOOP.
Maybe you are looking for
-
My new iPhone 6 seems to have a lot of problems, which are so frequent and annoying that I think I may have gotten a bad phone. I wanted to share some of them here to see if I'm the only one... 1. About once or twice a day, the screen goes completel
-
I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?
-
Hey guys Not sure if anyone is experiencing this problem. I've just recently upgraded to CS6 and noticed something bizzare about textbox linking. It's hard to explain this issue I'm experiencing. Hopefully it all makes sense. I have linked textboxes
-
Change Confirmation button Grayed
Hello Friends, We are in SRM 5.0, Extended classic, SP level 15. Even though I had security give me SAP_ALL and real buyer's role to me, I still see the Change Confirmation button grayed out. I can create confirmation but not change. Please advis
-
Order of numeric string of database column
I have database column that has varchar2 type. I tried to sort it in order but It would not work. It behaves like this. 1 10 11 15 2 20 3 30.... What I want is this 1 2 3 10 11 15 20 30 .... I tried format mask but it does not help. Please help.