No tables in header/footers- that *****

Can you no longer have tables in the headers/footers? If this is the case- so much for all the templates previously created for work- where the image/logo could be put in the header and repeated on all pages. What a load of crap.

Yeah, totally agreee. Running a company with all out documentation now going to have to be reformatted because Apple have taken this function away, really frustrated me.
However, the way around it is drop the image into the document. Position where you would like it to go and then click Arrange/Section Master/Move object to section master. This will then set it in the background for all of that section.

Similar Messages

Changes to table header row that repeat in several pages

Hello.
I have a table that expands over several pages, with a header row that repeats in all of them.
I want to hide some of the header row's columns by code.
When I change the header row, it changes only for the first occurence of the header row, and not for other occurences.
I tried to do somthing like that:
for (i = 0; i < Table1.nodes.length; i++)
if (Table1.nodes.item(i).name == "HeaderRow")
// ..hide the column..
But it only entered the loop once, and only changed it for the first row.
I also tried to look at Table1.HeaderRow.instanceManager.count, but again, it has the value of 1, so I can't access
Table1.HeaderRow<i>
or somthing like that.
So how can it be done?
Best regards,
Udi Dekel.
Edited by: Udi Dekel on Jul 30, 2008 9:24 AM

Hi Rahul,<o:p></o:p>
I have tried using multiple formats of images (.jpg & .png) for the problem and have been able to successfully achieve the desired result as per design.<o:p></o:p>
To further verify the issue that is happening on your system we need to do some extensive troubleshooting to isolate the issue. This would require you to open a ticket with Microsoft.<o:p></o:p>
Following is the link along with the number for Microsoft which would help you to open a ticket with us – <o:p></o:p>
http://support.microsoft.com/OAS<o:p></o:p>
1800 MICROSOFT
Thanks & Regards,
Vinayak Shetty

Problem Using Header/Footers in Pages App

I am in desperate need of some help with these header/footers. I have a 15 page document that I created in Pages and every time I try to insert 'auto page numbers', it labels some page numbers and not others. For instance, I have a Title page, a Table of Contents and then the main body of the document, but whenever I try to insert a header or a footer, it will insert them on the Title page, skip over the table of contents and then sporadically insert page numbers throughout the document.
Can anyone help me? I just want regular page numbers in the main body of the document only as well as a URL weblink for the footer in the main body of the document only.
AGh!

paulcw wrote:
If "logs" doesn't exist, then presumably the url is null.
I don't see how this could work.Yes, that is why I am seeing the NullPointerException.
>
It's possible that existing logging frameworks will create the log directory for you. I don't know. It's worth checking. I think generally it's a weird requirement to do this in Java code. Something like this would more typically just be something you create yourself as part of the deployment, or perhaps using a shell script or build system like Ant.I'm using the Java Logger. I'll have to look into whether it will create the logs directory for me or not.

Passing an internal table WITH HEADER LINE to abap object

Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
Thanks.

Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
report zrich_0001.
*       CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
    types: t_t001 type table of t001.
    class-data: it001 type table of t001.
    class-data: xt001 like line of it001.
    class-methods: change_table
                                exporting ex_wt001 type t001
                                changing im_t001 type t_t001.
endclass.
data: w_t001 type t001.
data: a_t001 type table of t001 with header line.
start-of-selection.
select * into table a_t001 from t001.
call method lcl_app=>change_table
             importing
                 ex_wt001 = w_t001
             changing
                 im_t001 = a_t001[] .
check sy-subrc = 0.
*       CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method change_table.
    loop at im_t001 into xt001.
      concatenate xt001-butxt 'Changed'
           into xt001-butxt separated by space.
      modify im_t001 from xt001.
    endloop.
    ex_wt001 = xt001.
endmethod.
endclass.
Regards,
Rich Heilman

SSRS Table/Row Header does not repeat on every page when exported to PDF

Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                               To achieve this
                              - I went to Advance mode by clicking the arrow next to column group
                              - Selected the Header Static column from Row Group
                              - Changed the following properties
                              - KeepWithGroup: After
                              - RepeatOnNewPage:
True
                              - The header columns
are set to not grow.
The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

Hi Mumblesnz1,
According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

How to display the sorting arrows in the table column header

Hi
I am doing a sorting for some columns from the click of the table column headers, In Developer studio, we are able to view the up and down arrows, I need that also to be made visible at run time, so that the user knows that there exists sorting based on that particular column. Is there any other way of doing it ? I cant place more than one control on the header or wrap the text to two lines..also. please clarify. thanks

I assume you are using NW 04.
The table column header contains a IWDCaption element which may display an icon and a text. See property IWDCaption.imageSource.
The table tutorial might also be helpful.
Armin

Entity Reference embedded within colspec attribute name-table col. heading

My team is working on a project that involves converting MS Word documents to XML. The XML is applied to a stylesheet (*.xsl) which generates a *.pdf document. Is it valid to include an xml entity reference within a colspec attribute name? For example, the xml document would contain the following code for a table:
<t id="t1109681052">TABLE 1.0 My Favorite Restaurants</t>
<tbl id="tbl921133606" val="1.0">
<TblHdg num="1">Table 1.0 My Favorite Restaurants </TblHdg>
<colspec id="colspec1148420628" name=" Restaurant Name" width="0.61875"/>
<colspec id="colspec201089067" name="Type of Authentic Cuisine" width="1.61875"/>
<colspec id="colspec201089069" name="Location" width="1.61875"/>
</tbl>
Is the following code valid in XML to produce the results in the sample table below when the XML is applied to a stylesheet (xsl)?
<colspec id="colspec201089067" name="Type of "Authentic" Cuisine" width="1.61875"/>
The desired table and column titles would be as follows:
Restaurant Name ----     Type of Authentic Cuisine ----     Location
Le Chantecler --------------->French     The Negresco Hotel
Promenade des Anglais Nice France
La Coupola -------------------->French     The Mirabeau Hotel
1 Princess Grace Ave
Monte Carlo Monaco
What is needed in the XML code to produce the table column heading with quotes embedded around the word "Authentic"?
Please advise. Thanks so much and have a prosperous and memorable holiday.

SOLUTION RESOLVED FOR THIS MESSAGE.

Image in table column header to the right of the text?

Does anyone know how I can put an image on the right of the text in the table column header?
If I do column.setGraphic it positions image on the left, how can I change the position of the image?
For that matter how can I set alignment of the image? Like if I want it in the corner (even left corner will do) and not next to the text?
Appreciate any help !

You can do this with CSS (needs an external stylesheet, can't be done (easily) with an inline style).
Something like
.table-view .column-header-background .label {
-fx-content-display: right ;
}(Untested... you may need to experiment a bit.)
The structure of the table view control from the css perspective is documented here: http://docs.oracle.com/javafx/2/api/javafx/scene/doc-files/cssref.html#tableview

How to Merge ADF Table Column Header in ADF Table ?

Hi All,
We need to have ADF Table Column header to be "Merged",
e.g :
There are two columns Header : | Qty (Case) | Qty (Pack) |,
can we customize it to display like this :
| ----- Qty -------|
| Case | Pack |
where there are two rows in column header, the first one is "Merged".
How can we do that ?
Thank you very much,
xtanto

Hi Kelly,
Thank you for your reply,
Using Column Faced, Header I can format the header of one column Only.
My requirement is to Merge header of two colums :
| ----- Qty -------|
| Case | Pack |
'Case' &'Pack' is two different column, so I need to add one row on the header of the two colums, then 'merge' them, and add the word '----Qty----'.
Is it possible ?
Thank you,
xtanto

JButton to simulate table column header

is there a property on the JButton that will make it behave the same way as a table column header ? Someone showed me a property window of a swing app and they wanted to know how it was done. i suggested to juse use soem buttons, but when i looked closer it was apparent that the action of the buttons was different from what i am familiar with. the buttons moved in/out when they were clicked instead of just turning color.

i was just playing around with it again and used an AWT button. these do the same thing that the example i saw. i wasnt aware of this difference between swing jbuttons and AWT buttons. When pressing an AWT button, it appears as if it is depressed when you click it as opposed to a swing button that just changes to a darger grey. what am i missing ?

Table For Header Text Old Value

Hi,
Could Anyone helpme in finding the table for Header text of the PO , as We know to find the current PO Header Text,by usinf th FM READ_text but i want to to find the header text for the po before Updated , Thanks in advance
Regards
Priyanka M Jain

Hi,
I believe that you need the text just after entering in PO during the runtime.
just enter the text and go in the debugg mode, check for table text / textline in the global parameters and you will find the text.
Hope this helps,
Raj

Getting error of Defining an internal table with header line, SELECT-OPTIO

Hi all,
i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
Following are the code:
DATA: BEGIN OF traptab OCCURS 50.
        INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
        blart LIKE mkpf-blart,
        blaum LIKE mkpf-blaum,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        cpudt LIKE mkpf-cpudt,
        cputm LIKE mkpf-cputm,
        aedat LIKE mkpf-aedat,
        usnam LIKE mkpf-usnam,
        tcode LIKE mkpf-tcode,
        xblnr LIKE mkpf-xblnr,
        bktxt LIKE mkpf-bktxt,
        frath LIKE mkpf-frath,
        frbnr LIKE mkpf-frbnr,
        wever LIKE mkpf-wever,
      END OF traptab.
Thanks & Regards,
sappk25

thanks

BADI cant use an internal table with header line

hi,
In BADI, we cant use an internal table with header line, and I am calling a function module which requires internal table as import parameter, now, the table I am passing is without a header line, So how to solve this problem ?

You can use a type and then create an internal table of that type.
types :
begin of t_<example>
*field list
end of t_<example>
data :
gt_<table> type standard table of t_<example>
pass this to the FM

Dynamicly creating an internal table with header line

Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping.

Dynamic table with header locked and vertical scrollbar problem.

Hi,
I have created a dynamic table with header locked.The sample code is as below.
<div style="width:910px ; overflow-x : scroll">
<h:panelgrid ...for header populated by binding to pagecode/>
<div style="width:910px ; height:200px ; overflow-y : scroll">
<h:panelgrid ...for data populated by binding to pagecode/>
</div>
</div>
The above piece of code serves the purpose.
There is an overflow in both x as well as y directions and scrollbars appear.But the y scrollbar can be seen only when the x-scrollbar is moved to the extreme right.
Does anyone have a solution so that both the scrollbars can be seen as soon as the table loads without the need to move x to the extreme right to see y?

wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
    wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
    wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
CALL METHOD gr_alvgrid1->set_table_for_first_display
      EXPORTING
        is_layout       = gs_layout
      CHANGING
        it_fieldcatalog = it_fieldcatalog1[]
        it_outtab       = <l_table>.
i am using like but its not accepting more than one line header in is_layout, is there any possibility to take like this.
Regards,
Mallikarjuna.

No tables in header/footers- that *****

Similar Messages

Maybe you are looking for