No tone during call

Hello there
i just acquired a iphone 4. my problem is that i cant hear the other person during a call, even the dialing tone doesnt work. when i plug in the earphone everything is fine - same with going on loud speaker - everythings fine. but on the normal speaker i cant hear a thing ! iphone is new and like a virgin. (yes i checked the mute button at the side 8] )

MetatronLT wrote:
Hello there
i just acquired a iphone 4.
We won't ask how..
my problem is that i cant hear the other person during a call, even the dialing tone doesnt work.
There should be no "Dialing tone" as such...presuming we are meaning the same thing. The mute button on the side is responsible for the ringer/ringtone of the telephone. When someone calls you you can try using the volume button (side) to try and increse it...you can also try it through the settings of the iPhone:
Settings > Sounds >Ringer and Alerts slider.
When someone calls you and you accept the call the button on the side becomes responsible for the speaker volume whether it be the loud speaker or the ear speaker. When someone calls again you could try pressing the + button to increase the in ear volume.
Worth a shot. Please try this and let us know what happens.
Ricky

Similar Messages

Random Keypad Tone During Calls

Over the last month or two I have noticed that while making or recievong calls at random points during the call I will hear a long loud tone very reminiscent of what the keypad sounds like, or when someone accidently hits a key on a regular phone during a conversation. I do not have the minute timer selected so I don't think it is from that. I am at a loss as to what it could be. Does anyone have any ideas or how I can fix it its highly annoying. Any help is appreciated. Thanks!

No as I specified in my original post the minute alert is shut off. Also the touchscreen is black and inert while on the phone so I don't think its my cheek. I also make sure not to touch any of the physical buttons on the phone. I may take it into a verizon store and see what they can do since I have been having other issues especially since the recent software update. Thanks for all of your replies though.

Key tones during calls - only audience hears

I have an HTC Thunderbolt and a couple weeks ago one of my coworkers told me he always hears keys pressed during our calls - for the last year! I had no idea because I don't hear them, but people on the other end of the call do. Verizon couldn't figure it out, so they replaced the device. Yesterday on a conference call I was told it did it again -- now I'm wondering if it is something with the phone lines in the New England area?
Factors I've ruled out:
my cheek hitting the screen - I'm on a headset sitting at a desk using my phone - not even holding it.
my headset - I've had several headsets, too, and it still does it.
an app - the original device was rebooted and now I have a "like-new" device with only a couple apps (facebook, instagram) and it still does it
Anybody else have callers report to you that it sounds like you're pressing keys but you don't hear it??

I got a brand new 16GB iPhone 5S mid-December, as did my better half, on our AT&T plan. We *BOTH* hear this random 'beep' during various phone calls, and once or twice, I even heard someone else talking that was not on either end of the phone call. It's almost as if someone is either listening in, or signals are getting seriously crossed over somewhere, but I NEVER had this problem with my older iPhones. Just the 5S. Any updates would be really nice if Apple would be willing to chime in here, considering the research I found has shown that users on Verizon, AT&T, and Sprint are all having the same problems.
So it would seem as if it is an iPhone issue, not a carrier issue. Just my opinion.

Connection tone change to music during call transfer, how ?

Dear all,
I have a Unity express 6 with IVR license connects to Call Manager version 5,
and I have a AA script within the unity express 6 and works fine.
However, I want to change the connection tone to music.
For example:
Call in --> press 1 for sales, press 2 for support.
During call transfer user will hear do..do..do..
But I want Music instead of do..do..do..
Can I program on Cisco Unity Express Editor, and what step do I need ?
Can I change the ringback.wav file in call manager ?
Can I use other methond ?
Many thanks.

Hi alexander,
The update is carried out through delta download.You can set the filter settings in tcode R3AC1.Related tcodes are R3AR2,R3AR3 N R3AR4.
Regards,
Disha.
Pls reward points if useful.

IPhone 4 Mic & Speaker not Working during Call

Hello All,
I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
Waiting for reply....

Do the basic troubleshooting steps described in the User Guide:
1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If restoring as new doesn't help, there is a hardware failure.

6233 model - Phone sound (during Calls) very low

Hi,
the sound I hear during calls is very low despite I have set tones and key pad sounds to the maximum.
Whereas the same in loud speaker mode or hands free mode is very good.
Plz help me
Model 6233

Check if you could put in to factory setting, if it would help.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

No volume during calls and music

I am unable to hear any volume at all during calls - both via the handset speaker and on speakerphone. I also can not hear music when played through the speakers. I have checked that the volume is turned up full. However, I am still able to hear alarms, ringtones and notification tones. I'm hoping that this is some sort of software issue. Is there any way this can be fixed?

Hi jb15, welcome to the community!
Did you check volumes under Settings > Sound & notification?
Also, if you press the volume up key, is the phone set to Silent, Priority or Sound?

Recipient's voice is not audible during call

Since yesterday, I am unable to hear the voice of the recipient/ caller in case of incoming/outgoing calls. I am able to hear the songs, default tones etc in the phone, only problem is during call time. What should I do?

You are aware that there is a separate volume level for in-call, right? Did you try altering the volume level while talking to someone? You can set the in-call volume between 0 and 10.
If this does not help, please let us know:
1) phone model
2) Windows Phone version
3) Firmware version
4) carrier/operator name
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

N97 high pitched tone in calls, beep TOO LOUD

A tone at about 13kHz is clearly audible during calls (incoming and outgoing). It is present during the start of a call for approximately 30 seconds, then goes away - or I switch to the ear that is less sensitive at high frequencies!
Also, the beep on dialing is TOO LOUD

Since yesterday afternoon suddenly I have the same.
It is constantly and there is a weird combination of displaying things.
Actually the phone is not useable anymore.
Does anyone has any idea what is happening here ?
I made a movie of it.
Since this forum does not accept wmv I put it here : http://83.87.245.122/n97beep.wmv

IPhone 5s - Microphone During Calls

I received my new iPhone 5s today and have encountered an issue. When in the phone app, no one is able to hear me during calls. If I switch to speaker mode however, my voice will be picked up. I've also tested with Siri, and my voice is being picked up there without issue. There was also no issue with my voice being detected in Facetime. As far as I can tell this issue only exists during phone calls without the speaker on.
- I've upgraded to the latest version of iOS hoping that might resolve it, but no luck.
- Also, I've tried turning off the noise cancelation feature, but again with no luck.
Has anyone encountered this issue before? What steps would you recommend for resolving this?
Thanks!

Hey MKick,
I have found something that may help you fix this problem:
http://forums.macrumors.com/showthread.php?t=1483567
Hope it helps

IPhone 4s earpiece very quiet during calls, but normal in Voice Memos.

My iPhones earpiece is really quiet during calls, but I'm loud and clear on the other end. It's also weird because if I record a message in Voice Memos, and I play it through the earpiece, it sounds fine. I'm in 5.1.1, Jailbroken (shouldn't make a difference) and I even poked a hole in the little earpiece grill, which didn't help and didn't hurt. And yes, the plastic piece is gone, I've had this phone for close to 5 months.

Mine also has this issue. Its the 64GB version. It's happened twice now. After about 5 mintues the call quality degragates and it sounds like i'm in a wind tunnel. The person on the other end also hears this and it is no longer possible to hear each other. Both times i've been using the new headphones provided with the 4s. I've done lots of searching on this issue and only found your thread which leads me to believe its not a common problem. I'm just not sure whether its a firmware or hardware issue but as nobody else has this issue its more than likely a hardware issue! :-(

Low quality sound during call

Hello,
Since the iOS 7 update that I've been noticed that the sound quality during calls is very poor to others, almost like I speaking away from the iphone without speaker, regardeless I keep earing everything loud and clear!
I've already tested with other iphone 4/4S/5 iOS 7 users, and also running different iOS versions, as well as other phone brands, and the problem maintains!
Upgraded to 7.0.3 today, despite the improvement/enhancements/bug corrections list dont mention any issue addressed to this problem, hoping to solve the problem, but nothing change, its pretty much the same as before!
All settings are at the max, and also perform some tasks as suggested on apple support forums like tweaking the accessability options, by turning noise reduction off, but still the same!!
My S/N is C34JPLSTDTWF.
Hope I had described accuarately, in order to you perform the correct troubleshoot for this, this if you ain't already done it!
Best regards,
Pedro Sousa

This happened to me as well and I confirmed others are experiencing same speaker/mic/bluetooth issues with both 4S and iPad 2, 3. Applied the updated patch yesterday, things are worse because now I have NO sound via the speaker. What's the FIX?!

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

IPhone 5c IOS7.0.3, other people can no longer hear me during calls unless I tap into speaker mode and back?

Hi,
I'm currently using an iPhone 4S, but my partner has just bought an iPhone 5c. A while ago, before the IOS7 upgrade, my phone would for some reason act as if I had clicked mute during calls. Nobody would hear me, but I could hear them perfectly. The only fixes were to hang up and recall them back, or to switch it to speaker mode and back again. Very annoying. However, after updating my IOS, it suddenly stopped doing this. It was fixed, I was happy, game on.
But recently, my partners phone which was working perfectly fine before the new IOS7.0.3 update, has developed this problem. Exact same issue, exact same solution. I wouldn't mind so much, but shes bought this phone in the last month, its a brand new phone, new software, new model... It shouldn't still be doing this! Whats worse is that when driving, its very dangerous for her to have to keep switching between speaker and not just to get her phone working. (She drivers with the phone in a cradle with hands free on).
This issue is... Annoying. I've found that its not exactly a rare thing, and that a lot of people have had it for quite a while, but the only solution I've seen is to open the back of your phone and cover a certain part with paper/cardboard... Not exactly what we want to do is it.
Does anybody have any advice or a solution to this, as I'm going a little crazy trying to reset everything and fix it!
Thanks in advance!

Same issues here. Sometimes during outgoing calls, people cannot hear me at all, even when the signal strength is good. Only solution is to soft reset the phone. A couple of times the person could hear me for the first few seconds of the call then it dropped completely.
I also experience the issue with the 3G data as you described (I think they are related... i.e., when the 3G data isn't working, the issues with outgoing calls exists too). The phone will just randomly seem to lose it's internet connection, even with full signal strength. Soft reset/toggling airplane mode fixes this.
I called Apple support; they asked if I was covering the microphone during outgoing calls (as if I'm that stupid). Come on Apple, I have a University degree in Computer Engineering, don't insult my intelligence! They then asked me to restore the phone (which I already did). Next solution they offered me was to replace the phone by sending me a new one first (at a cost of $35), or I could send it back and be phoneless for a week while they send a new one (which is not an option for me). I also put on a $30 Invisibile Sheild so if I exchange it, I already lose that. I believe the issue is not with the hardware, since the microphone seems to work just fine. Given that it is intermittent like this, it seems there's a software/firmware error somewhere that gets the phone into a bad state.
Very disappointed that the $800 phone I just bought functions worse for phone calls than the Nokia brick I had 8 years ago.
If anyone has a permanent solution for this that doesn't involve exchanging the phone, please let me know.

Errors occurred during call of function module BUPR_EMPLO_DELETE

when distributing employee data from (HCM) to (CRM) there is an error that appears in relation with the settings for the Business Parner:
"Errors occurred during call of function module BUPR_EMPLO_DELETE
Message no. R11335
Diagnosis
The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
Within a LUW, the indicator must be consistently set or not set.
System Response
The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors."
This prevents CRM to be updated with the changes. Kindly help me on the same.

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

No tone during call

Similar Messages

Maybe you are looking for