No totalization in a report of report painter for row containing a set
Hi!
I've created a set XXXX based on the table-field GLPCT-RACCT. One of the row of the set is a formula. The formula is the sum of the rows of the set / 2 i.e row 005 of the set XXXX is (001002003+004)/2. The set has been added as characteristic value element, as row of a report of report painter. I've take a look to the output of the report but the total of the row based on the set does not take into consideration the formula inside. why?
i.e
Report period 1
row 1 100
row 2 10000
row Z based on set XXXX:
001 20
002 20
003 20
004 40
005 (formula) 50
total of row Z based on set 100 (instead of 150)
Could you help me in solving the problem?
Thanks
Giovanna
There may not be any currency attached to the value derived by the formula. That could be the reason why it is not getting summed up. The total would be expecting all the items to be summed up are of same currency,
I am not sure of how to make the total to add up the formula.
Alternatively you may check to see if all your row requirements can be fitted in within the set , i.e. including subtotals and totals.
Similar Messages
-
Report Runing Very Slow for range even data set for that range is small
Hello Experts,
I have a report which runs on date selection.
When I run the report for say 01.01.2000 -31.12.2010 whcih contains 95% of the data , the report output is coming with in a minute.
But when I ran the report from 01.01.2011 - 31.12.2011 , or say 01.01.2011 for a single day , where the data set is hardly 3k records,the report is runing for long time 15 - 20 minutes and not showing output.
But when i remove this variable and run the report , it is coming again with in a minute.
One weird thing is when i ran the report from 01.01.2000 - 31.12.2011 it is also coming with in a minute, but when i ran for 01.01.2011 single day it is not coming.
Can any one share some inputs on this one.
Thanks
VamsiHello Experts,
I have a report which runs on date selection.
When I run the report for say 01.01.2000 -31.12.2010 whcih contains 95% of the data , the report output is coming with in a minute.
But when I ran the report from 01.01.2011 - 31.12.2011 , or say 01.01.2011 for a single day , where the data set is hardly 3k records,the report is runing for long time 15 - 20 minutes and not showing output.
But when i remove this variable and run the report , it is coming again with in a minute.
One weird thing is when i ran the report from 01.01.2000 - 31.12.2011 it is also coming with in a minute, but when i ran for 01.01.2011 single day it is not coming.
Can any one share some inputs on this one.
Thanks
Vamsi -
Project Report in Report Painter
Hi,
Need your help for one of my issue.
Current issue in the System / reqirment:
There is a project report in report painter-GR55 which used to provide planed / actual cost and planed / actual quantity of the project. Whenever we are trying to run the report for several years and periods there is no cumulative data displaying. E.g. if we want to execute the report for the range of 001 period/2009 fiscal year to 004 period/2010 fiscal year, system is displaying data of 2009 and 2010 for the period of 01 to 04 only and there is missing data for period from 05 till 12 in 2009
Root cause:
There is no field in table-CCSS for the fiscal year/ period (FISCPER field name). As per the OSS note-157720 this is standard behavior of report painter. SAP suggested to build new report group based on OSS note-157720.
Approach:
An an alternative we used table-RWCOOM as there is field fiscal year/period (FISCPER). The new report group is working fine except planed cost of the project as the planed cost of the service orders are added up to project planed cost. We found there is missing field name-Object indicator which will restrict planed cost of the service order flow into project for which planed cost of the service orders are added up to project cost plan. This field-object indicator is available in table-CCSS.
Looking for now to fix the issue:
Option-1
We are looking for any field similar to object indicator in table-RWCOOM which will restrict planed cost of service flow into Project
Option-2
Build new report based on OSS Note-157720.
Please advise for this issue.
Thank you in advance.
Regards,
RakeshHi Eli,
Thanks a lot for your suggestion. A small query i got here while building the auxilarry coloumns-2 and 3.
As per the Note (157720), in the auxilary coloumn-2 for the period we have to define period as 0 .....from period-1. Whereas my from period will be 1 and i can't provide from period-1 here
In same way for Auxilarry coloumn-3 period details as per the Note will be To period +1 ...17 whereas my to period will be 12 so i may not enter the details.
System will forbid if to period value is less than from period value.
Could you guide me on this.
Thank you for your cooperation.
Regards,
Rakesh -
Need to add Purchase Order field in Standard report in report painter
Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
MeenakshiHi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field. -
Vendor Ageing Report Through Report Painter
Dear All
As per my company requirement we are trying to develop vendor ageing report through report painter, by using library 8A4 (EC CPA: Drill Down Open Item), our requirement is all normal items and some special GL transactions (Not all) has to flow in this report.
In FKI4 / FKI5 if we assign any special GL, then data flowing in to report relating to that particular special GL transactions only, normal items are not flowing in to report. If we not assign any special GL then all normal and special GL transaction are flowing in to report.
Can anybody suggest how to restrict flow of some special GL transaction data in to report. Our requirement is all normal transaction along with some specified special GL transaction data has to flow in to report. Points will be rewarded on helpful answer.
Thanks & Regards
MadhavaHi Madhava
You can pull all values whether Sp GL or Normal GL values. For a particular 'Column' if you assign Sp Gl Indicator you will fetch all Sp Gl Values in that column. Same way in other column, you dont assign Sp Gl Indicator, instead you calculate manually as shown below;
In a similar fashion you can calculate all values for (00-30), (31-60) ...and so on.
Hope this clears all your doubts?
Regards
Abbas -
Dear experts,
I need to create a custom report with ReportPainter with the data you see with t.FAGLB03.
Since there are no standard reports for New GL, to copy and modify, i created a library by copying the library 0FL (Table FAGLFLEXT) and i stopped after :(. For example, "Lead column" must be a hierarchy of profit centers. In the "Element definition" i added "Name" - "Profit Center" and chose "Characteristic is Interpreted as Set / Hierarchy," and "Characteristic is Interpreted as variable. In the list of "Value of variable" for the "From" there is no variable that refers to the table FAGLFLEXT, PRCTR field.
What should I do? I create all the necessary variables with T.GS11, or is there an easier way? Can I use something existing?
Please, can you give me an explanation step-by-step what I should do. Any advice is welcome!
Thank you in advance.Hi Serena,
As stated you can create your own reports using the standard SAP library 0FL
you do not need to create a custom library.
One tip I have is that If you are creating reports with the Profit Center scenario active then
you can still use transaction code KE5B to copy your Financial Statement Version (FSV) groups to EC-PCA.
Even though your reporting source will NOT be EC-PCA in the New G/L, this method can still be
used as a short cut to create account groups that can be referenced as sets in Report Painter.
I used this method in the lead column for "Account Number" to easily generate a FSV style report
in report painter in the New G/L with the profit center scenario activated.
- Good Luck -
Report Painter for GL balances
Dear Experts,
I would like to create a report through report painter, which gives the GL balances Business Area wise under Profit centers.
I'm using the 0FL New General Ledger Library.
I'm able to get GL balances either Business area wise or Profit center wise.
I'm not able to get GL Balances with Business area and Profit center.
Requirement is like this.
Under Profit Center, we want Business area wise - GL Balances.
Profit center
Business Areas
GL balances
Kindly help me to create such a report
Thanks
Om
Edited by: Om Prakash Arjuna on Nov 7, 2011 4:39 PMHi,
It seems it is not complicated.
Crate Report:
Row / Column: PC&BA
GL Accounts
from the above ex, crate report Row with Account Number & Calumn PC&BA
Stil you have issue plz revert with clear requirement.
Regards
Viswa -
No Program generated after creation of new report via Report Painter
Hello,
I have created a new report after copying an existing report from report painter GRR1. The new report has also been assigned to a new Report Group relevant to the same library.
There is no Syntax error. The only change has been to the Title of the report.
However when I am trying to execute the report nothing happens. ABAP found that no program has been generated by SAP for this mew rpeort. We confirmed this by searching with my user ID in table TRDIR.
However there is no trace of it.
We have tried to execute the report from GRR3 & GR53 (report group). The report & report group is having the same attributes as the old one.
Unless the report is in executable stage we are not able to go to the Selection screen & finally from the Technical Information to the program name.
Please could you let me know what can be the possible cause for this & how can we resolve the same.
Thanks & Regards
Shreenath@JoeSchmoe115: Thanks for your suggestion. Using a web service or WCF service would still mean dealing with potential timeouts for very large reports (granted you can adjust those timeouts).
I think an approach using a console app could work, but rather than having the web app spawn it, an alternative would be to do the following: (1) have the web app insert report generation requests (including all necessary report parameters) into
a database table, and (2) have a console app, periodically invoked by Windows Task Scheduler, which reads that database table and then uses the SSRS API as you describe to generate the report, save the byte stream to a file, and finally send
the e-mail notification to the user.
mkedwards
What you've described will work but saving report generation requests in separate table may not be necessary. I don't have much experience with web services but can they just spawn C# console app with needed parameters and exit without waiting for console
app to complete?
The positive side of using database to store report generation requests is that you would have complete log of all requests. Your console app can then update database with completion status. -
Creation of report using Report Painter
Dear All,
I have a requirement to create a report using Report Painter. I don't have any idea about this.
Could you pls provide me some study materials or Links to study Materials, it could of great help.
Regards
Ranjanreport painter
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
<b>reward points if helpful</b>
Message was edited by: Rahul Kavuri
Message was edited by: Rahul Kavuri -
Report Painter for Creating Report in Group currency
Dear all,
I have created a report using report painter. I but currently the figures are in Local currency. May I ask how can I convert these figures into Group currency?
Thanks.Hi,
In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
Revert for further help
Regards,
Rahul -
Cash Flow report in Report Painter
Hi,
I am trying to make a cash flow report in Report Painter.
Can any one help me with steps or config material so that i can prepare and tally the cash flow report being generated in Report Painter.
Also there are report line items where by the figures are getting populated but are not tallying with the GL balance, if seen individually by going to GL line item display
Thanking You,
ParinHI
GOOD
I NEVER WORK ON THIS BUT HERE I AM GIVING SOME LINKS , I HOPE YOU WILL GET SOME IDEA FOR YOUR PROBLEM.
http://www.asug.com/client_files/Calendar/Upload/BPS%20presentation%20to%20Indiana%20ASUG%202-10-06.ppt
http://sap.ittoolbox.com/groups/technical-functional/SAP-R3-ACCT/cash-flow-report-642778
THANKS
MRUTYUN -
Adding ztotals table in report painter for transaction FGI3 in report type
Hello All,
I have zprograms in report painter for trasaction FGI3. For my reports i have to add Ztables..In the transaction FGI3 there is report type 020. Here they maintain the Zreports.
Can you hellp me out in adding the totals table.
ThanksHi,
Transaction FSi2 takes you there.
Alex- -
Drill Down Report in screen painter
Hi Experts,
I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
First question is how will I have the drill down report (alv list type?) in screen painter?
Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
Thanks in advance for all teh support. Points will be rewarded.
Cheers,
KurttHai,
Go thru this Threads u ll get an idea,
Drill down report help
Re: regarding Drill Down Reporting
drill down capabilities for an alv grid display field using oops concept
Regards,
Padmam. -
Reports through Report Painter
Hi All,
Can you please guide me how to use report painter and how to create custom reports through report painter.
I want to prepare a report that will show Planned costs,Commitments,Actual Costs,Original Budget,Supplements,Current Budget in a single report.
If any body have some manuals with screen shots,that will be very usefull.
Waiting for your answars.
MuzamilNo better manual than SAP help!
Below is the link to Report Painter
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards
Sreenivas -
Change Selection criteria for existing report in Report painter
Hi Experts,
We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report to add new fields or not? Is that we need to create new report for this?
Thanks in advance..
ShilpaShilpa-
In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
Hope this helps.
Shail
Maybe you are looking for
-
Itunes no longer play or import music CD's, on my PC - MS Media Plyr does
Help, my PC was able to import music before to itunes but no-longer does. When I start-up my PC with Music CDs in both CD drives - computer asks what I want as default music player and I select itunes. CD DIAGNOSTICS: Microsoft Windows XP Professiona
-
Event Viewer - Error/Warning
Hi, I am seeing the following errors on the subcriber Event Viewer system log. Does anyone know what is causing this. Event Type: Error Event Source: BROWSER Event Category: None Event ID: 8032 Date: 4/28/2006 Time: 10:12:19 AM User: N/A Computer: CC
-
Make Item of Data Entry Form Insert Only, Non Updateable
Hi, Can someone please tell me how to make an item on a data entry form insert only and not updateable. The user can enter the text item in insert mode but cannot update the text item in update mode. This was really simple in Oracle Forms, hoping it
-
While publishing using VS 2012 professional to Azure Web Role getting following warning. After this warning even if i waited for hours, publish process never finish and then I have to manually deploy the package on Azure Cloud Instance. Warning: This
-
HT5312 i want to change my apple id password
I dont know the answers to the security questions