No track listings - Connection error to CDDB
Morning all!
I too am having problems importing track names. I am also getting a message to check my internet connection - even am I was connected and even have the CDDB website open in the browser.
Any suggestions??
Its your wireless modem most likly blocking iTUnes from going out on the net to phobos.apple.com read this artical it may be of some help http://docs.info.apple.com/article.html?artnum=93434
Most wireless modems have some basic form of a firewall
Similar Messages
-
I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
When I insert a CD into my computer, iTunes cannot get the track names before importing, I get the "Unable to connect to the CDDB server. The network cannot be reached." Bizarrely, however, once I import the tracks onto my PC and ask iTunes to 'Get Track Names' for the files in my library, it can do it fine. I am also able to access the iTunes Store without trouble.
Also, in what I'm sure is related, the Apple Software Update program does not work anymore ("The server could not be found"), so I've to manually download new versions of iTunes from the Apple website.
I've had this problem for months, and I've tried pretty much every solution I'd seen posted for similar problems (reinstalling iTunes, disabling my virus protection, updating Gracenote, ensuring the proxy settings are automatic) with no success.I've just tried putting my computer into Safe Mode (with netwroking) to check if there was some other program stopping it from working properly, but iTunes still acted the same. It's more of a minor inconvienience than a problem, seeing as I can just get track names after importing and update manually, but it's still pretty baffling.
-
Unable to connect to the CDDB using iTunes 10.6.1.
When I put my CD in and try to get the track names, I get this error:
Unable to connect to the CDDB server. the network cannot be reached.
The internet is fine, I checked the firewall and I unistalled/ reinstalled iTunes, but this error keeps popping up.
I was able to connect late week and retrieve track names, but yesterday and today the same error. Any suggestions?I have same problem but I am on a PC. Everytime I try to get track names I get the CDDB server error. I have an interenet connection and can upgrade itunes (which seems to me that the application knows I have an internet connection) but I continue to have problems with track names and it seems artwork as well.
-
PDP connection error when not on wi-fi
This has probably been asked elsewhere so sorry in advance if it has!! Since leaving the house this morning (I use wifi at home) I've had "no network connection" even though I have full 3G signal! I've tried the hard reset & reset from the settings, I've turned my
mobile data off & back on again but nothing's changed, checked with my network provider (EE) who said its not my network and
to go to the apple store which I have but they can't see me until tomorrow. I have seen other people post about this on here but in there case the hard reset seems
to have resolved it but this isn't working for me! It's also coming up with the pdp connection error message when using safari.
Thank you in advance! Nikki.Hi Fordyy88,
I'm sorry you are having issues connecting to the internet through your 3G network.
It appears from the error message that the issue is with your Carrier. See below:
iOS: Error message when trying to use a custom Access Point Name (APN)
Symptoms
When activating 3G service on an iOS device using a custom Access Point Name (APN), the error message "Could not activate cellular data network: PDP authentication failure" may appear.
Below are troubleshooting steps you can try on your own before seeing the Genius tomorrow:
iPhone: Troubleshooting a cellular data connection
Symptoms
This article will help you troubleshoot the following cellular data issues on your iPhone:
No connection over cellular network, but works over Wi-Fi
Resolution
Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, o rcontact AppleCare to troubleshoot further.
I hope you are back on track soon!
- Judy -
iTunes has suddenly stopped finding track listings when I import a cd. I had trouble with my Belkin wireless modem a little while ago and it seems to have stopped since then. I can get onto the internet, so it's not the connection. Anyone got any tips? Thanks, Martin
Its your wireless modem most likly blocking iTUnes from going out on the net to phobos.apple.com read this artical it may be of some help http://docs.info.apple.com/article.html?artnum=93434
Most wireless modems have some basic form of a firewall -
HT5622 I have a connection error when I try to sign on to icloud, what is wrong?
I have a connection error when I try to sign on to icloud, what is wrong? My phone is stolen and I'm trying to track it. Icloud was working fine earlier today. Help anybody please!
If you are getting this error when trying to use icloud.com on a computer, follow these steps.
-
AEBS port conflict? Intermittent problem connecting to Gracenote CDDB
Hi all,
I posted a similar question in the iTunes forum, but the more I troubleshoot, the more I think this is an AEBS issue.
Whilst importing CDs into iTunes, I've had difficulty getting the track listing. I've switched WiFi connections (borrowing my neighbour's) and this resolves the problem. Unfortunately, this means I'm not operating on my local network, which is not acceptable.
Still on my AEBS, I make repeated attempts, until finally I'm able to connect to CDDB and get the tracklisting.
What's causing this? I wonder if there's a port conflict that I need to address. Any ideas?
SteveHiya,
Resetting the AEBS gave me a temporary reprieve, but it's failing to connect to Gracenote CDDB again.
I tried unplugging a VoIP gateway which is connected to the same router, but no difference. Also unplugged an AirPort Express which I use for AirTunes.
Anyone else had similar difficulty with CDDB??
Steve -
Data Federator data source not available causes Universe Connection error
I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
RFC connection error between Netweaver 7 EHP1 and Ides ECC6
Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. JimbobHi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.
Maybe you are looking for
-
Hi, Im very new to module pool i have one requirement . that is i want to write the functionality for follwoing keys. 1.newentry 2.copy 3.delete. as per spec i want the following logic PBO Logic Create PF status in the PBO and create Application tol
-
Output type (transaction MN05)
Hi guys, my problem is this: my customer wants to link two output devices to the same Purchase Order document type. I enter transaction MN05, I insert output type but for the same Purchasing Doc. Type (Company code,Purch organization) I can link an o
-
Hi everybody, Plz visit the site http://www.schematic.com, view the portfolio part. How is it created? Can anyone refer me to some kind of help / tutorial which can lead me to create this technique of displaying thumbnails and clicking on that thumbn
-
Load data in PPPM (Business Partner, profile)
Hi, I want to load data in tcode PPPM (Business Partner, profile), please anybody know any Bapi for it or any other method to load data Thanks in advance.
-
i Tried to create a Data object as procedure but i got this error ERROR [NA000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-04044: procedure, function, package, or type is not allowed here Source: "msorcl32.dll" can anyone please tell how can i us