No traffic detected with Wireshark

Hi,
Don't you know, how is it possible, that when a TCP client running on PPC connects to server running on PC over ActiveSync, there are no packets captured by the Wireshark running also on this PC? I tried to listen on all of possible interfaces, but always with the same result.
Thank you.
Message was edited by:
tomas_beranek

It isn't possible to 'connect' to anything an not send packets.
So....
1. It is already connected. Something either started the service earlier or it started when the computer booted.
2. Wireshark isn't catching everything. Maybe packets are filtered or there are more than one IP stacks.
3. You are initiating some activity that doesn't actually require any traffic, maybe the data is cached locally and so it doesn't go via the network.

Similar Messages

  • How to snoop traffic on PGW 2200 with Wireshark

    How to snoop traffic between PGW 2200 & MGX 8880 with Wireshark?

    I hope to have understood correctly your question.
    1) enable the snoop on PGW using ./snoop_scrip in /opt/snoop/ path
    2) collect the trace of the call and so stop the snoop usinf CTRL C
    3) open wireshark
    4) drag and drop the files generated from the snoop in wireshark
    5) wireshark will ask to merge the file
    P.S. PGW uses RUDP to communicate with the media gateway. Set the wireshark RUDP port (in Edit - Preferences - Protocols menu) according to PGW configuration.
    Regards.

  • Random-detect with MPLS

    Has anyone implemented CBWFQ with MPLS and used random-detect with any of the classes/queues? Is there anything special about random-detect that allows it to drop TCP v. UDP when doing label switching?

    I'm basically referencing that no other headers are looked at when doing label switching. Therefore, when applying random-detect to a queue we can not easily have TCP seperated from all other traffic to maximize our chances of dropping a TCP packet to slow down the source. It appears that the commonly accepted method is to set the mark probability denominator high enough and make sure that the majority of your traffic is TCP.

  • Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

    My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
    {CE3119AD-35EF-41CF-9C21-C7698FEB8393}    2013-10-14 21:53:00:256-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 4 updates.
    {EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}    2013-10-15 04:15:54:069-0700    1    162    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Download    Download succeeded.
    {77DAE88F-2795-4258-8BBF-8D27E53662CF}    2013-10-15 12:10:38:196-0700    1    193    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems (KB2862330)
    {1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}    2013-10-15 12:15:25:676-0700    1    183    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
    {A220898A-E5FE-4FE7-8413-2B0C7B4013D0}    2013-10-15 12:15:25:766-0700    1    202    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Reboot completed.
    {A5400FF2-33ED-4A47-8409-13E5DFE16A6D}    2013-10-15 19:29:31:486-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {43C533EE-775D-445E-A652-06648B72DE65}    2013-10-15 19:29:49:702-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}    2013-10-15 19:30:05:744-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 3 updates.
    {4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}    2013-10-15 19:30:08:753-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {51248882-41AC-4E59-B813-87AD326310AD}    2013-10-15 20:00:05:044-0700    1    183    101    {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}    501    0    wusa    Success    Content Install    Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
    {FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}    2013-10-16 00:11:39:832-0700    1    148    101    {00000000-0000-0000-0000-000000000000}    0    c8000247    AutomaticUpdates    Failure    Software Synchronization    Windows Update Client failed to detect with error 0xc8000247.
    Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
    (1) Checked Setting,  set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
    (2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
    (3) Ran MS FIXIT
    (4) Ran System File checker Scan (sfc /scannow)
    (5) Ran CHKDSK /F
    (6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
    (7) Ran Update for Windows 7 for x64-based Systems (KB971033)
    None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
    Any help or guidance is appreciated.
    Solved!
    Go to Solution.

    The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
    The End!

  • [iPhone] warning: UUID mismatch detected with the loaded library - on disk

    I get this warning at the console when I build and run my app in my device.
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.1.sdk/usr/lib/l iblockdown.dylib
    =uuid-mismatch-with-loaded-file,file="/Developer/Platforms/iPhoneOS.platform/Dev eloper/SDKs/iPhoneOS2.1.sdk/usr/lib/liblockdown.dylib"
    Anyone has this issue and managed to resolve the warning ?

    Same problem here. I ran into this problem after I installed 3.2.5 with the new 4.2BetaSDK. I had 4.1 on my phone when the problem arose but I then installed the 4.2 beta and now the beta 2 and I still cannot debug on my phone.

  • Warning: UUID mismatch detected with the loaded library

    Hi,
    Can anyone help me how to solve UUID Mismatch warnings. when i debug my application on iphone then i get the following errors and because of these errors my application hangs. wheen i disconnect my iphone and again run the application on iphone without connecting to xcode then it works fine. But i need to debug the app, so can anyone help me on this issue.
    Below is the list of warnings i am gettings:
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CrashReporterSupport.framework/CrashReporterSupport
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/Foundation.framework/Foundation
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/UIKit.framework/UIKit
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreGraphics.framework/CoreGraphics
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AddressBookUI.framework/AddressBookUI
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AddressBook.framework/AddressBook
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibsqlite3.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CFNetwork.framework/CFNetwork
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/AudioToolbox.framework/AudioToolbox
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreAudio.framework/CoreAudio
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/SystemConfiguration.framework/SystemConfiguration
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibgcc_s.1.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibSystem.B.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibobjc.A.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/CoreFoundation.framework/CoreFoundation
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibicucore.A.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibxml2.2.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibz.1.2.3.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/Security.framework/Security
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibstdc++.6.0.9.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/IOKit.framework/Versions/A/IOKit
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/s ystem/libkxld.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/IOSurface.framework/IOSurface
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l iblockdown.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/GraphicsServices.framework/GraphicsServices
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/JavaScriptCore.framework/JavaScriptCore
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/WebCore.framework/WebCore
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/WebKit.framework/WebKit
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/ImageIO.framework/ImageIO
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/QuartzCore.framework/QuartzCore
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/SpringBoardServices.framework/SpringBoardServices
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/AppSupport.framework/AppSupport
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreText.framework/CoreText
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/MobileCoreServices.framework/MobileCoreServices
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/IOMobileFramebuffer.framework/IOMobileFramebuffer
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreTelephony.framework/CoreTelephony
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Accelerate
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/usr/lib/l ibbsm.0.dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/vecLib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/libvDSP .dylib
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreSurface.framework/CoreSurface
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreVideo.framework/CoreVideo
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/Frameworks/OpenGLES.framework/OpenGLES
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MBX2D.framework/MBX2D
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/Celestial.framework/Celestial
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/ITSync.framework/ITSync
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/DataAccessExpress.framework/DataAccessExpress
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/AccountSettings.framework/AccountSettings
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MediaToolbox.framework/MediaToolbox
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/MobileBluetooth.framework/MobileBluetooth
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/CoreMedia.framework/CoreMedia
    warning: UUID mismatch detected with the loaded library - on disk is:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.0.sdk/System/Li brary/PrivateFrameworks/VideoToolbox.framework/VideoToolbox
    Thanks in advancce
    Nandita

    Same problem here. I ran into this problem after I installed 3.2.5 with the new 4.2BetaSDK. I had 4.1 on my phone when the problem arose but I then installed the 4.2 beta and now the beta 2 and I still cannot debug on my phone.

  • Problem is detected with Array : 01

    I was backing up my server when it suddenly turned off. When it restarted it showed a critical error message saying "Problem is detected with Array : 01".
    Windows tried starting and kept rebooting so I just turned it off.
    When I launch the RAID utility I clearly see that the drive 02:01 seems ok but the other one is marked as "failed orisconnected" (it is connected ans spinning).
    This is the spec: On the server I have windows 2012R2 installed on two HD 1TB on RAID1.
    I habe an unused NAS, so I decided to create an iSCSI drive as a Target, and run the windows backup utility to do a Full Backup on it.hat may I have done wrong and how could I resolve this issue?
    This clearly is related to the windows backup utility since this server was working fine until then.
    Thanks.

    Hi,
    The issue could be due to that one of the two drive is failed in the RAID 1. You need to replace the failed drive and rebuild the array automatically.
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Particle detection with grid background

    I am attempting to detect cells in an image from a microscope, but the problem is that a grid background exists which prevents the typical thresholding method to work. I have tried using a low pass filter to remove the grid pattern, but in order to filter out the grid completely, the cells become too blurred. An example image is attached. Is there any function to filter away the grid while keeping the cells in focus?
    There are also light patterns on the image, but a color plane extraction already removes their intrusion on thresholding.
    The ideas mentioned in the thread below may help to detect the cells after the grid has been removed.
    http://forums.ni.com/t5/LabVIEW/particle-detection​-with-poor-background/td-p/679618
    Thanks a lot!
    Attachments:
    untitled 2.png ‏1455 KB

    Hello Tiraken,
    One potential solution is to take an image of the grid without any cell then subtract all images with the template.
    Andy Chang
    National Instruments
    LabVIEW Control Design and Simulation

  • "A problem was detected with your serial number"

    HELP! Everytime I open Dreamweaver 8, Fireworks, or any other
    software package I get the message "A problem was detected with
    your serial number." It then gives me the option to retype my
    serial number. After I type in the serial number I get the little
    checkmark like everything is great. But when I press "Continue" it
    comes back with that same message.
    I called Adobe support and they said it sounded like my
    registration key got corrupted and that I would have to follow
    TechNote 4e7826b7 which steps you through removing Studio from the
    computer and deleting orphaned files. I've done this TWICE and when
    I tried to call Adobe technical support, they sent me to customer
    support (with a long hold time in between) and then they sent me to
    technical support. When I mentioned I had already passed this
    route, the Adobe employee said she would inform the supervisor and
    they would get back to me. Guess what. Never happened.
    Surfice it to say I'm still getting the message and I don't
    want to uninstall a third time because I know the outcome. Does
    anyone have any suggestion? Pleeeeeeeease!
    Thanks,
    Glenn Lauderdale

    Same problem here. I just hit 'cancel' and the program opens
    fine.
    Adobe posted a hot fix that allegedly fixes the problem. I've
    run the thing several times, and the annoying box still shows up.
    You can find it here:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_18976&extid=tn_18 976&dialogID=53494061&iterationID=1&sessionID=4830e245130c574b2b37&stateID=1+0+53482525&mo de=simple
    I'll keep checking to see if any fix comes up.
    John

  • "An error has been detected with a required application library"

    Hi All,
    I installed Audition 3.0 on a new laptop running Windows 7 Home Premium.  The installation goes fine but when I try to run the program it fails and I get this message, "An error has been detected with a required application library and the product cannot continue.  Please reinstall the application."  I've tried reinstalling many times but it doesn't help.  Any ideas?
    Thanks,
    Billy

    There's a good chance the software is too old and is not compatible with Windows 7.  One thing you might try is to uninstall and then install the new CS6 trial version and see if that works properly for you.  If it does, then it is not a mchine issue (except that the machine might be too new for the old version).

  • "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.

    I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
    I am now unable to open any pdf?
    Any words of advise here how to fix this problem?
    Thanks!

    ** Moved to Acrobat Forums for quicker and accurate resolution steps ***

  • An error has been detected with a required application library and the product cannot continue. Plea

    I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
    "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
    What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
    It appears that a vital part of the program is being blocked.
    Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
    Thank you!
    -Dan Sacapano

    Anoop,
    Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    I have not received any such message as the one seen on that page.
    Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
    Thank you,
    -Dan

  • Bluetooth in iPad not detecting with imac

    Bluetooth in iPad not detecting with imac

    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • Msg. appears: "Problem detected with the font - in the font file $C.  quit all apps. and remove this font file ...

    Recently while browsing with TenFourFox 31.6.0 or reading an email in Thunderbird 3.1.20 with my PPC MacG4 with OSX 10.4.11,the above message pops in "  ... a problem has been detected with the font -, in the font file $C quit all applications and remove this font file or replace it with a new version". I don't know where to start, not ever having seen this message.  :-))  Any suggestions much appreciated. Thanks.
    -- Raymon

    Hi Raymon, it sounds like file corruption, I doubt there is a real font file called that.
    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If still no change after a regular boot, then open Font Book in Applications & see if you can find it there, or have Font Book Validate all fonts.

  • Peak detection with two thresholds

    Dear colleagues!
    Excuse me, but I need example or any help for peak detection with two thresholds. Namely two adjustable thresholds with standard peak detector for creating a detection's bandwith or range. 
    Peak detector have only one level threshold... But why only one...
    Solved!
    Go to Solution.

    If I understand correctly, you want to set two thresholds as shown in the image below.
    The top peak is easy, so no need to go into details for that one.
    The peak for the second threshold (red) will be a bit more difficult to do.
    You would need to filter out the signals that cross the top threshold (blue).  This would be done by identifying the values as they cross the top threshold boundary.  You would then need to build a "window" around them (we'll come back to this one).
    You would need to define a range of valid values for the 2nd peak, which are from the bottom threshold to the top threshold. Search for the number of values that cross the top threshold plus one.  The "plus one" is the one you will want to search. With all the other peaks that you do not want, you can create windows around them.  The remaining one is the peak of interest.
    Message Edited by Ray.R on 10-23-2009 08:21 AM
    Attachments:
    2Thresholds.PNG ‏6 KB

Maybe you are looking for

  • Restriction in T Code F-02

    Is it possible to restrict the Posting Keys that can be allowed to be used for entering transactions through T Code F-02. E.g. Only 40 and 50 Posting Keys should be allowed to be used through T Code F-02

  • To send IDOC to vendor from SAP for purchasing order

    Hi Gurus, I want to setpu an EDI for send the outbound & inbound idocs to vendor for purchasing order from SAP and below are the message type I am using: Outbound message type : ORDERS Inbound message type : ORDRSP INVOIC I know how to set up the lin

  • Error reading from base station?

    I installed the airport extreme disk on my Dell pc(hoping to connect with cable modem) & the airport utility claims to have found a base station faa0c9, and IP address 169.254.72.207 (i didn't enter any of this information) but it will not 'continue'

  • Handling errors in BAPI

    Hi frnds i m unable to know the answer for the q? How do u handle errors in BAPI. i.e i m using standard BAPI po creation if some errors occurs then how to handle those errors how can we know the errors. plz reply me back frnds... thnks...

  • TS3992 I am receiving the ""This iPhone cannot be backed up because there is not enough iCloud storage available" but I show 4.9 of 5.0GB available.

    I am receiving the above error, but it shows I have enough space. I have DELETED my backup account and restarted but always receive this on my iPhone. I have disabled backup of photos and mail backup. Just really need calendar and notes/reminders.