No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if  any and install the same.
Not all the fields will be mapped with BI info objects.  Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

Similar Messages

  • How to maitain Deltas for generic master data source

    Hi Friends,
    I created a view using MARA and MARC table. This view fields maitained by attributes of ZWMAT_PLT Characteristic.
    Now i faced the problem with deltas.
    How i need to maitain delta for above view.
    please give me solution for above problem.
    Thanks & Regards,
    Guna.

    Hi,
    If you have timestamp field in the view it is better use the Timestamp for the generic delta. Else try to include a timestamp field in the view.
    Also check this forum.
    How to set the delta for existing generic data source
    Delta Updating a Master Data Infoobject
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Assign points if this is helpful
    Rgs,
    I.R.K

  • Update rule for COSTCENTER master data

    Hello All,
    Cost Center is not an attribute of 0EMPLOYEE, neither a field provided by the table PERSON.
    0COSTCENTER gets data from the MASTER Datasource 0COSTCENTER_ATTR. When writing an update rule for this characteristic, what code should be written?
    and Which fields should be considered from the table /BI0/MCOSTCENTER.
    Thanks in advance.
    Regards,
    KP

    Hello,
    Lets consider a ZINF infoObject with time dependent attribute as ZDEPART.
    When writing an update rule, I do a lookup on ZINF. Do  I have to write a code for this llokup (mapping this infoObject)?
    After writing a code for a lookup on ZINF, will this InfoObject be available for selection in "Master data attribute of"?
    Kindly reply.
    Regards,
    KP

  • Creating Transformation in 3.5 Version for a Master DATA Source

    Hi ,
    Currently i am working in 7 version.
    I have Created a new master data info object  Through  a Template from a standard  info object 0Ven_comp.
    This Standard Info object 0Ven_comp   already has a data source 0VEN_COMPC_ATTR , where it is getting values.
    Now i want to use the same data source for my new info object which is created as template based on the 0ven_comp.
    Can anyone please tell me how i can use the same data source  for my new info object and that too i need to create transformation in 3.5 version.

    Hi Guru,
    You cannot use the same datasource with two different versions.
    Either it should be 7.0 or 3.x version.
    You can create a copy of datasource and you can replicate it in BI system.
    Regards,
    Rajesh

  • Customize trf rules for an export data source

    Hello
    I am loading data from an ODS into another ods and cube through its 'export data source'. Now, I want to customize it by writing some routines in the mapping. I am able to write my routines in the upd rules but not in the trf rules. Why is this so? I know that the trf rules are system generated, is that why users cant edit it?
    Regards,
    Srinivas.

    Hi Atul,
    You are right , transfer rules cannot be written, though transfer structure can be appended with new fields.
    -Vikram

  • Error in creating RSDS using transfer rules for master data datasources

    Hi ,
    when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
    MY QUESTION IS HOW CAN WE SEE THE LOG? AND
    PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
    THANKS IN ADVANCE .

    Hi Ankit,
                  Yoy have to load data to the cube.For that you need update rules.
    Steps to load data to the cube
    1.Replicate the datasource.
    2.Assign Infosource
    3.Create transfer rules
    4.Maintain the update rules to the cube.
    5.Right click on the datasource and schedule an infopackage for it.
    Execute the Infopackage and pull the data to the cube.
    Hope this helps
    Regards
    Karthik

  • How can I activate the transfer rules for the ODS updating a data target.

    We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS  and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
    I then Replicate the datasource 80FIGL_O01.
    I must then <u><b>'activate' the transfer rules</b></u>.
    However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
    How can I activate the transfer rules for the ODS updating a data target.
    The error text is as follows:
    DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 02/15/2007 10:42:33.
    The time stamp in the BW system is 11/07/2006 13:11:54.
    System response
    The load process has been terminated.
    <b>Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
    Thanks for your assistance.
    Denny

    Hi Dennis,
           Try, using Business Content to activate your data source
           hope this will help you
    How activate business content?
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

  • Transfer Rules for two Source System in Production

    Hi All,
    I have a question.
    I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
    Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
    Thanks is advance.
    Regards,
    Komik Shah

    Hi,
    If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
    In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
    In BW Production, you then then maintain the source system conversion of both source system.
    Thanks.

  • Activating transfer rules for new source system

    Hi
    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
    Regards
    Sujai

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,
    Suchitra.V

  • Data Sources for the Master data of FI-CO,MM and SD from R3

    Hi Gurus ,
    Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
    Could you please guide me step by step .
    thanks in advance ,
    Pratham

    Hi
    It varies from Client and project. But the Most common SD & MM are from LO **** pit.
    help.sap.com is the best source for this
    Hope it helps

  • Master Data source for sales district or Region in CRM

    Dear All,
    Please let me know the Master Data source for sales district or Region in CRM.
    Thanks
    Regards,
    Sai

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • No master data source mainatenance for object

    Dear SDN.
    I want to look for master data for object but it gives message.
    No master data source mainatenance for object.
    What is going on wrong.

    Hi,
    When you are prompted for the infoobject in master data read you shoud give the main characteristic name, not the attribute name(attribute which is there in the data target). It will map the attribute automatically.
    Regards,
    Amruth

  • Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi
    Thanks for your reply.
    That is Transaction data source. I want master data source.
    Thanks,
    Mannev.

  • Which Master data Source (Attr) is available for the field VBUK-GBSTK

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi Mannev.
    I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
    Hope it helps.
    BR
    Stefan

  • Language error while loading master data source for text

    Hi,
    We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
    "Error during multibyte alignment for language D (position 2)".
    Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
    Thanks
    VV

    Hey Vishal,
    If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
    Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
    Regards,
    Anjum.

Maybe you are looking for

  • How can i take a schema offline

    Hi, my problem is that i have a schema, which is migrated to somewhere. and i dont want the users to connect it anymore. but i cant change the password. how can i take it offline, or is there any other solution like (no one but only sys and system ca

  • How to convert value from exp. value to double/float???

    Hi all, I am fetching values from database, which is of type double / float. eg. values will be like -22,777,548 will be stored in database. NOw if i use float a= rs.getFloat(1); out.println("a="+a); I get output as a= -2.2777548E7 I want to remove "

  • How can I make my home wi-fi the preferred or default network

    I have a number of wi-fi networks available to me at home due to public wi-fi nearby Is there a way of getting the iphone to try and access my home one first As far as I can tell the software looks for available networks and then tries to access them

  • I want to request refund my payment

    I have purchased skype subscription by duplicated accidentally..want to request refund..chat page unable to open..any otherway to communicate.. Thanks

  • Update bank Details IT 9 on ESS

    Hello Expert, An Employee belongs to a certian payroll area MM - is trying to update his bank details with date 01.06.2010 - system is throwing error that master data changes to payroll past is not possible. the payroll for payroll area MM is already