No Transport option in Change list tab

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi,
In XI (in IR & ID) you will not find the transport option in tab change list. If you what to tansport any namespace or any particular object then put the mouse on that and right click then press Export and follow the instructins. Finally it will create a .tpz file. You have to take the help of BASIS team to tranport this file, once the file will be trasported into Quality or Production then you can Improt it from menu Tools --> Import desigen objects..
Regards,
Sarvesh

Similar Messages

Saving Option in Change layout TAB

Hi ,
I am taking Sales order list in VA05
I clicked on change layout tab n Selct field as per my requirements
but Now I want to save that layout but I am not getting any saving option
in menu bar Settings - layout - saving this option is in grey
How to activate this option?
Regards,
Akshay

Hi,
check this thread, you have only answered this questions answer
VA05 : Save Layout Option is deactive..
Thanks,
Raja

Version of the object using Transport Wizard and Change Lists

Hello experts,
When using the Transport Wizard, after selecting --> "Individual Objects" --> "Add Objects from Change Lists", do you know if the version of the object selected
- is the last one (aka, the version right after the last activation of the object)
- or the version of the object at the time it was added to the Change List?
Thank you very much!

Go to T-code SE10, go to the transport request you created. See all objects that are attached to your request. Now you would need to revert all the objects attached to its previous version(as you recieved before changes).
Go to each object, by double clicking on it, go to utilities - version management and see the relevant version just prior to your change. Uncheck the checkbox which is checked on current version and check the previous version checkbox and find button on toolbar which says retrieve version, click on it and once that version is retrieved go to change mode on that object and generate or activate the same.

In CMS, there is no Transportable change list in ID

Hi All,
I am using CMS. I want to transport Configuration Objects. But when I am going to Change list tab page in ID, I am able to see only open and close Change list. There is no option called Transportable Change List.
I have followed HELP.SAP.COM which tells,
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
But still the status of the change list changes to closed and there is no tab called transportable change list.
However I am able to transport IR objects correctly and there I am able to see Transportable change list too.
Is there any specific configuration for this??
Warm Regards,
Gouri

Hi Gauri,
for ID, the XI track which you have created, you should specify SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0) swcv.............now you create a new config scenario in ID.............Now you should see transportable change list in ID....
Thanks,
Rajeev Gupta

CTS - Don't Always Want Transportable Change Lists

Is there a way to turn off automatic creation of the Transportable Change Lists? At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created. I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder). Is there something like this for CTS?

This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates. I would like that turned off and I will only make transports when I am ready.
Thanks

Not able to see other users change list in IR/ID

Hi All,
I need to perform the CTS+ transports in PI 7.1 and when ever i am going to change list tab apart from my user id i am not able to see any other user id to transfer the objects to my id
Is some setting is missing or some role we need to assign.
Appreciate your reponse on this.
Thanks
Ankur

Hi Anku,
Have a look on this doc [Limit Authorization PI Content objects.pdf|http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/a005629b-c063-2910-0fb8-f57dc68abaca], and/or contact your basis team who manages the user roles...
The same in [e-learning|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40457bb0-c663-2910-85ad-f5f42edb715a].
just in case of... for ESR authorization, you have this one [How To Setup Profile Based Authorization In ESR Using PI 7.1 EHP1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?QuickLink=index&overridelayout=true]
Else... a stupid question:
in "change list" tab, have you click on the "filter" button to be able to select "User = All" ?
and then to do your transfer...
Regards.
Mickael
Edited by: Mickael Huchet on Feb 14, 2012 9:24 AM

Activate change list error

Hi all,
when I select change list tab in Integration Builder Configuration and activate objects the following error message appear:
The progression of time as shown by the database timestamps was in reverse direction. See integration 77 into versionset ff496181e6c311d892c2000f206a353d (that timestamp was:2004-08-18 17:56:32.0). Current timestamp is:2004-08-18 16:27:25.902. This was detected when integrating vsid=2d104851f12711d8b220000f206a353d into the target versionset.
What can I do??????
Thanks in advance,
Michele Lazzarato.

Dear Mr Lazzarato,
18.08.2004 17:39:22
please have a look at note 733902!

Not option for Transport under the tab Change list in both IR and ID

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Also we are running a seperate NWDI server for CMS and the SLD is with the XI production server.
Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi Anand
Please check if the following link is of some good to you:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/f9f02cf3e41ecce10000000a1553f7/frameset.htm
Also check for steps mentioned here:
http://www.saptechies.com/minisap-610-installation/
I hope it helps
Regards
Chen

Is there an about:config option to change FF's default action when closing a tab so that it displays the previous tab rather than the next tab?

With the new 3.6 tabbing behaviour (new tabs open to the right of the current tab, rather than at the end of the tab list), the old default behaviour when a tab is closed is no longer appropriate. Instead of displaying the next tab after the one that was closed, FF should display the previous one. Is there an about:config option to change the default behaviour upon closing a tab?

Try one of these:
*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122
*Tab Control: https://addons.mozilla.org/firefox/addon/1480

I cannot seem to find an option, the change what page a new tab comes up as.

The square button with a +, used for opening a new tab. It brings me to facemoods search. How do i change this, to... perhaps Google.
I don't see an option to change this in the options.

The issue seems to have been resolved.
ZacheryGangrel, please close the thread so that 'solution chosen by....' line appears below the first post.

Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help?

Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help? Going around in circles! Grrrrrrrrrrr

Is this your machine or the company's? Machines that came with Snow Leopard or earlier installed come with system and software install disks that can be used to reisntall the iApps that came with the machine orignally.
If this is your machine and it came with Snow Leopard or earlier installed the disk will look slimialr to one of these:
If it is the company's machine see if they have the disks.
Do a custom install and then use Software Update to update iPhoto to the highest version that is available.

I am trying to speed up my video clip in imovie 09 but it doesnt give me the option to change the speed on my video adjustments clip tab..Help me please..

I am trying to speed up my video clip in imovie 09 but it doesnt give me the option to change the speed on my video adjustments clip tab..Help me please..

If you right click on your clip, does it offer to Optimize Video? If so, after you optimize you can change the speed.

Adding another option in the list option in the relation ship tab

Hi,
I am working on creating another option in the list of option for the relations ship tab for the account details of Org type.
I was able to create the new Option and i have create a another event which is assign int eh application set but and it is showing in the detail area1 of the relations but when I choose that option no even it is getting fired. I have cloed the further relation ship option i cloned the structure and class and even but even then it is not getting fired. I have assigned the view linkkage ACC_REL but even then it is not getting fired. Please send me the list of table in which we need to do the setting.
Thanks
naveen

Resolved

Option of changing font in List display

Hi,
Is there a option of changing the font size of the fields in List display using write statement.
if there is a standard program,please let me know the name.
Thanks.

There is no option to change the font or font size in classic list display.

Would like to change my home page. I click on options and my general tab is blank with only the ok and cancel buttons showing. How do I fix this?

In options, under the general tab, it is blank all except the ok and cancel buttons. I can't change my home page. Please help.

Hi cor-el,
Thank you for your reply. Before I had seen your reply. I went into options and under general, all of a sudden it showed what should be there. I closed browser and did it again and it didn't show. It has been blank for roughly two months. Just seems funny that I ask a question and after all this time of not showing what it should, it does, to only be blank again.
I have also been trying to update the flash player. That comes up completely blank as well with nothing showing at all. I did this several times the day before I posted my question. That same day I also hit the reset button for firefox when I was having trouble trying to update the flash player.
I did as you said to do. Nothing has changed. Is there something else that I could try?

No Transport option in Change list tab

Similar Messages

Maybe you are looking for