No Transport request in Virtual system
Hi,
I have setup the STMS , where we do not have production server hence i have used virtual system.
All Transport request moved from Dev to Quality which appears fine the queue of QAS Server, but not appearing in Production Server which is virtaul.
kindly advise.
Thanks you
irfan.
Hi,,
We do not have any QA Approval procedure, but all requests are assigned to one project.
Seconldy i went into the Tcode SE01 entered the released transport number but i could not see any such logs which says waiting for QA approval.
all it says is this..
Log Overview for DEVK900421
DEVK900421 MM-Release Strategy
DEV System DEV
Checks at Operating System Level 14.09.2010 02:14:24 (0) Successfully Completed
Pre-Export Methods 14.09.2010 02:14:27 (0) Successfully Completed
Export 14.09.2010 02:14:33 (0) Successfully Completed
Import steps not specific to transport request
QAS Quality Server
Selection for Import 14.09.2010 02:14:33 (0) Successfully Completed
-> Continue: Other Transport Ggroup 14.09.2010 14:53:51 (0) Successfully Completed
Import steps not specific to transport request
Similar Messages
-
Problem during import of 121 transport requests to productive system
Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve productionare you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit -
Transport request from development system to testing system
Hi,
I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object 0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system it get overwrite 0COMP_CODE in testing system?
ThanksHi Jk,
Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
Khaja -
Transporting Transport Request from One System to other
Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zuberaHi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
<b>In ECC5.0</b>
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
<b>in ECC6.0</b>
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant -
How to release a Transport Request at operating system level
HI,
How to release a Transport Request at operating system level. Please specify the complete commands along with the pf parameters for TP Export only.......<b>tp export <request></b>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions
<b>tp cleanbuffer <sapsid></b>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
<b>tp delfrombuffer <request> <sapsid></b>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Reward points if you find this helpful to you. -
Change Request Management: virtual systems
Hi!
We would like to set up Change Request Management (ChaRM) approach for 3 +1 systems:
DEV --> VT1 (virtual system) --> QAS --> PRD
Questions:
1) Are there some restrictions implementing ChaRM with virtual systems?
2) We would like to use in parallel non-ChaRM transports and we have there
an automatic transport twice a day.
Will this approach be a problem for the ChaRM?
3) Which transport routes will be used by ChaRM?
a) one for transportof the SAP objects (e.g. "SAP") and one standard transport route (e.g. Z<SID>) or
b) do I have the possibility to choose the transport routes?
Any helpful information will be very appreciated and awarded by points.
H. ThomassonI am very sorry for the mess I did trying to post my message. I was not able to post it.
Can you please give me any solutions to the problem reported?
Thanks
Antonello -
Importing transport request bypassing quality system
HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul SHi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V -
How delete the Transport request in Development system
Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin -
How to import external Transport request into sap system
Hi Gurus,
I have Transport request in the cofiles and data files into one sap system
how to import those files into another sap system (those are different sap systems)
could u tel anyone any settings is required and how to import Those Transport request.
Any help is appreciated.
Thanks in AdvanceHi Siva,
After copied the datafile and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
It will put the request in the que then you can import it to the target system.
Thanks,
Satyabrat -
How i can copy my transport request from one system to another system
hi,
i want to copy all my code means( programs,tcode,class,FM...every thing.) which is under a transport request, now i want to copy all this code same as it is in another system
eg.
i have all my objects in for example D10 now i want all my code in some another system for e.g in D30.
how it is possible....Hi Vipin,
Check tcode SE03 for transport related issues.
as suggested by all the TR needs to be released from the current system to make it ready to be transported to next system.
Once you release the request ask your basis administrator to transport the request to D30.
<b>Before releasing the request check with the basis administrator if the target system has been set to D30.</b>
Lokesh
Message was edited by:
Lokesh Aggarwal -
Disable creation of transport request in development system
Hi Sapgurus,
I have a strange requirement. I want to disable the option of transport request creation in development system for all the object.
Waiting for your valuable inputs. Thanks a lot.
Regards,
PritiPriti,
May be this solution is not suggested by SAP.but yes by hook and cook if you really urgent need this we can achieve this i tried by putting a breakpoint here in my system for testing.and i got result.
just open include LSTRDF30 in se38.search for string WHEN 'INSA'. here you can modify your code as below:
CASE okcode.
WHEN 'LOCK'.
PERFORM append_to_order.
WHEN 'OWNA'. " show own orders
PERFORM show_own_orders.
WHEN 'INSA'. " insert new order
SET SCREEN 0. LEAVE SCREEN."this need to be add.
exit.
PERFORM insert_new_order.
WHEN 'ATTR'. " object attributes
SET SCREEN 0. LEAVE SCREEN.
in such manner request will not be generate.
but only access key is required.
Amit.
Edited by: Amit Gujargoud on Aug 5, 2008 4:35 PM -
Transport request in single system landscape
Hi,
In single system landscape we are having only two clients (dev & prd), we are using T-code scc1 to transport a request from dev client to prd client.for this every time we are changing the production client settings.could anyone suggest me how to transport a request with out using scc1.
Thanks & Regards,
Reddy vHi,
you have only one system and two clients? Then you simply cannot use CMS functionality. Maybe it is possible to create transport target group and set up a client dependent transport control, but I've never tried it on one system landscape. Read more: http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
If I where you I'd use virtualization and install two SAP systems on virtual machines, then use standard 2 system landscape. It's much safer for your repository!!!
Regs,
FS -
Import steps not specific to Transport Request
Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01####### My Request Name
M01 System M01
Checks at Operating System Level 05.03.2014 16:48:34 (0) Successfully Completed
Pre-Export Methods 05.03.2014 16:48:37 (0) Successfully Completed
Export 05.03.2014 16:48:47 (0) Successfully Completed
Import steps not specific to transport request
M02 Virtual System
Selection for Import 05.03.2014 16:48:47 (0) Successfully Completed
Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48 (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank youHi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar. -
Import requests in an virtual System
Hello Colleagues!!
We are having an problem with requests stopped in virtual system within our landscape.
What name of job or report that import the request in an virtual system?
But there aren't job monitor for virtual systems.
Thanks
Best RegardsHello,
This is the first time I hear about IMPORT into a Virtual system.
Not sure how we can import any transport into a virtual system (which doesn't exist yet). I am not sure if it is possible though.
Thanks -
Regarding logical system assigining to transport request
hi, all,
how to assign the transport request for logical system.,....because i transported the interfaces to quality system..please guided me in thisHello Sai
I am not sure about the meaning of your question.
You do no assign any logical system to a transport request but you must define the target system (see Properties of request). Calling the search help for this field you see that the target systems are coming from the active transport configuration (STMS).
Perhaps your question is about how to set the client in which the request is imported. Regarding workbench request containing client-independent objects it does not matter whether you import into client '000' or your productive client.
For customizing requests containing client-dependent objects you set the client when executing the import (either in STMS or via command line when calling the tp command directly).
Regards
Uwe
Maybe you are looking for
-
Caros senhores boa noite, Após várias indicações de amigos e muitos elogios a marca HP resolvi comprar no dia 10.05.2010 uma impressora Modelo HP OFFICEJET PRO 8000 A809 SERIES, a qual iria utilizar para uso em meus trabalhos academicos e serviços do
-
I have installed FF Sync on 2 computers but there does not seem to be a step by step account of how to use the usernames, passwords,secret keys on each computer to allow transfer of data. There must be a simple explanation for non professionals!!
-
Can I preload all images in LightRoom Mobile?
I love LightRoom Mobile so far. Is there a way to "preload" all images so that I can view/edit locally without being connected? I tried it on a trip and didn't know that I have to go into each image to get it to download to the iPad. The thumbnails a
-
Deleting confirmation not possible for particular PO item.
Dear experts, we are on an SRM 5.0 server 550 with a classic scenario. We are experiencing some problems when deleting confirmations on 1 certain process. case: - puchase order created with 1 item (10 pieces) - confirmation was created for 5 pieces.
-
Reading Marketing Data & Documents
Hi Experts... I need to retreive all Marketing Data using Function Module. The only Program I use now is CRM_MKTPL_SHOW. But when I try it, the output from this function module is most likely not as complete as I can see the content from Marketing do