No TrueColour with xf86-video-intel

Since i upgraded from video-i810 to video-intel, X obviously runs in 16 Bit ColourDepth. When using video-i810, without changing anything in xorg.conf except specifying the driver, TrueColour is back (but I get hard freezes using video-i810). The Graphic Card is an i830.
Strangely (from how I read the log files) X is indeed convinced to run in TrueColour. I attached some relevant files below.
I really hit a wall with this and would be very happy if someone could come up with an idea about what could be going wrong here!
xorg.Conf, slightly stripped down:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe"
Load "dri"
Load "freetype"
# Load "type1"
Load "synaptics"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
xwininfo output (this is exactly the same with video-i810, but it definitely looks different)
xwininfo: Window id: 0xa0003f "Arch Linux Forums / Search results - Minefield 3 Beta 5"
Absolute upper-left X: 0
Absolute upper-left Y: 20
Relative upper-left X: 0
Relative upper-left Y: 19
Width: 1024
Height: 728
Depth: 24
Visual Class: TrueColor
Border width: 0
Class: InputOutput
Colormap: 0x20 (installed)
Bit Gravity State: NorthWestGravity
Window Gravity State: NorthWestGravity
Backing Store State: NotUseful
Save Under State: no
Map State: IsViewable
Override Redirect State: no
Corners: +0+20 -0+20 -0-20 +0-20
-geometry 1024x728+-1+0
xdpyinfo output:
name of display: :0.0
version number: 11.0
vendor string: The X.Org Foundation
vendor release number: 10400090
X.Org version: 1.4.0.90
maximum request size: 16777212 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32, LSBFirst, 32
image byte order: LSBFirst
number of supported pixmap formats: 7
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 4, bits_per_pixel 8, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
depth 15, bits_per_pixel 16, scanline_pad 32
depth 16, bits_per_pixel 16, scanline_pad 32
depth 24, bits_per_pixel 32, scanline_pad 32
depth 32, bits_per_pixel 32, scanline_pad 32
keycode range: minimum 8, maximum 255
focus: window 0x180000e, revert to PointerRoot
number of extensions: 34
BIG-REQUESTS
Composite
DAMAGE
DEC-XTRAP
DOUBLE-BUFFER
DPMS
Extended-Visual-Information
GLX
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RECORD
RENDER
SECURITY
SGI-GLX
SHAPE
SYNC
TOG-CUP
X-Resource
XAccessControlExtension
XC-APPGROUP
XC-MISC
XFIXES
XFree86-Bigfont
XFree86-DGA
XFree86-DRI
XFree86-Misc
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
default screen number: 0
number of screens: 1
screen #0:
print screen: no
dimensions: 1024x768 pixels (270x203 millimeters)
resolution: 96x96 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x56
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store NO, save-unders NO
largest cursor: 64x64
current input event mask: 0xda001f
KeyPressMask KeyReleaseMask ButtonPressMask
ButtonReleaseMask EnterWindowMask StructureNotifyMask
SubstructureNotifyMask SubstructureRedirectMask PropertyChangeMask
ColormapChangeMask
number of visuals: 17
default visual id: 0x23
visual:
visual id: 0x23
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x24
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x25
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x26
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x27
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x28
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x29
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2a
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2b
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2c
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2d
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2e
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x2f
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x30
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x31
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x32
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x54
class: TrueColor
depth: 32 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
there are no errors in xorg.log.
edit: by "obviously 16 bit" i mean that in all applications, bars are clearly visible instead of color gradients.
Last edited by hokasch (2008-05-05 00:12:06)

hey,
thanks for your advise. i tried this already without removing my xorg.conf.
the only thing i didnt try out of this wiki is to downgrade my kernel to 2.6.31.6-1
if i set i915.modeset = 1 to enable kms i got a blank screen. no idea what to do with it. doesnt matter if a add in mkinitcpio.conf i915 and intelagp. i cant post any log of this boot, during the blank screen because i have to reboot blind.
i have an more or less easy question, how do i find out, wich driver is in use for my graphic card.
i tried lspc -v:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Acer Incorporated [ALI] Device 048a
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 048a
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Acer Incorporated [ALI] Device 048a
Flags: bus master, fast devsel, latency 0
Memory at d3400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
i would expect somesthing like vesa, or intel but there is nothing similiar. i'm sorry, if this question is to obvious for others. and the another point is, my resolution is 1024x768 but it should be 1366x768. so if anyone is able to help me, i would be grateful.
greetings

Similar Messages

Intel i965 on 2.6.28 kernel --- results with xf86-video-intel 2.5.99.

I compiled and booted into 2.6.28 and switched xorg.conf back to
EXA.
Ok, it worked a little bit better but it did not WOW me. So, I compiled by hand the
latest intel driver and DAMN! very smooth in Compiz... "lightening fast" I don't have
any 3d games to compare but, some "artifacts" that were happening on startup of the
AWN dock are GONE. I can play a movie trailer and drag it around with wobbly windows
and it looks awesome.
Here's what I did....
use./autogen.sh --prefix=/usr or ./configure --prefix=/usr where appropriate.
[1] pthread-stubs
git clone git://anongit.freedesktop.org/xcb/pthread-stubs
./autogen.sh --prefix=/usr
[2] xf86driproto
git clone git://anongit.freedesktop.org/xorg/proto/xf86driproto
./autogen.sh --prefix=/usr
make install (its just headers so there's nothing to compile)
[3] Dec 22 version of libdrm (the latest)
http://dri.freedesktop.org/libdrm/libdrm-2.4.3.tar.bz2
[4] Intel driver
http://xorg.freedesktop.org/archive/ind … 9.1.tar.gz
./configure --prefix=/usr
Transitions everything now in Compiz is smooth, smooth, smooth....!!!!!!
Enjoy!!!!
[ANNOUNCE] xf86-video-intel 2.5.99.1 Mon Dec 15 17:43:30 PST 2008
http://lists.freedesktop.org/archives/x … 00714.html

For those who'd like some PKGBUILDs in order of compilation and install, these are what I used and it works quite well.
libpthread-stubs
pkgname=libpthread-stubs
pkgver=0.1
pkgrel=1
pkgdesc="stubs missing from libc for standard pthread functions"
arch=('i686' 'x86_64')
url="http://xcb.freedesktop.org/"
license=('MIT')
source=(http://xcb.freedesktop.org/dist/$pkgname-$pkgver.tar.bz2)
md5sums=('774eabaf33440d534efe108ef9130a7d')
build() {
cd "$srcdir/$pkgname-$pkgver"
./configure --prefix=/usr
make || return 1
make DESTDIR="$pkgdir/" install
libdrm
pkgname=libdrm
pkgver=2.4.3
pkgrel=1
pkgdesc="Userspace interface to kernel DRM services"
arch=(i686 x86_64)
depends=('glibc' 'libpthread-stubs')
options=('!libtool' 'force')
url="http://dri.freedesktop.org/"
source=(http://dri.freedesktop.org/${pkgname}/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
libxcb
pkgname=libxcb
pkgver=1.1.93
pkgrel=1
pkgdesc="X11 client-side library"
arch=(i686 x86_64)
url="http://xcb.freedesktop.org/"
depends=('xcb-proto>=1.2' 'libxdmcp' 'libxau')
makedepends=('pkgconfig' 'libxslt' 'python')
options=('!libtool')
license=('custom')
source=(${url}/dist/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd ${srcdir}/${pkgname}-${pkgver}
libtoolize --force --copy || return 1
aclocal || return 1
autoconf || return 1
automake --add-missing || return 1
./configure --prefix=/usr --enable-xinput || return 1
make || return 1
make DESTDIR=${pkgdir} install || return 1
install -m755 -d ${pkgdir}/usr/share/licenses/${pkgname}
install -m644 COPYING ${pkgdir}/usr/share/licenses/${pkgname}/ || return 1
libx11
pkgname=libx11
pkgver=1.1.99.2
pkgrel=1
pkgdesc="X11 client-side library"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
depends=('libxcb>=1.1.90.1' 'kbproto>=1.0.3')
makedepends=('xproto>=7.0.13' 'xextproto>=7.0.3' 'xf86bigfontproto>=1.1.2' 'xtrans>=1.2.1' 'kbproto>=1.0.3' 'inputproto>=1.4.4' 'xorg-util-macros')
options=('!libtool')
license=('custom:XFREE86')
source=(${url}/releases/individual/lib/libX11-${pkgver}.tar.bz2
xorg.sh)
md5sums=()
build() {
cd ${srcdir}/libX11-${pkgver}
libtoolize --force --copy || return 1
aclocal || return 1
autoconf || return 1
automake --add-missing || return 1
./configure --prefix=/usr \
--with-xcb || return 1
make || return 1
make DESTDIR=${pkgdir} install || return 1
install -m755 -d ${pkgdir}/etc/profile.d
install -m755 ${srcdir}/xorg.sh \
${pkgdir}/etc/profile.d/ || return 1
install -d -m755 ${pkgdir}/usr/share/licenses/${pkgname}
install -m644 COPYING ${pkgdir}/usr/share/licenses/${pkgname}/ || return 1
xorg.sh
export XDG_DATA_HOME=$HOME/.local/share
export XDG_CONFIG_HOME=$HOME/.config
export XDG_CACHE_HOME=$HOME/.cache
if [ -z $XDG_DATA_DIRS ]; then
export XDG_DATA_DIRS=/usr/share:/usr/local/share
else
export XDG_DATA_DIRS=/usr/share:/usr/local/share:$XDG_DATA_DIRS
fi
if [ -z $XDG_CONFIG_DIRS ]; then
export XDG_CONFIG_DIRS=/etc/xdg
else
export XDG_CONFIG_DIRS=/etc/xdg:$XDG_CONFIG_DIRS
fi
dri2proto-git
pkgname=dri2proto-git
pkgver=20081228
pkgrel=1
pkgdesc="X11 OpenGL extension wire protocol"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
license=('custom')
replaces=('dri2proto')
provides=('dri2proto=1.99.3.99' 'dri2proto-git')
conflicts=('dri2proto')
groups=('xorg')
source=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/xorg/proto/dri2proto"
_gitname="dri2proto"
build() {
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cd $startdir/src/$_gitname
sh autogen.sh --prefix=/usr
make || return 1
make DESTDIR=${startdir}/pkg install || return 1
xf86driproto-git
pkgname=xf86driproto-git
pkgver=20081228
pkgrel=1
pkgdesc="Xf86driproto"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
license=('custom')
replaces=('xf86driproto')
provides=('xf86driproto=2.0.4.99' 'xf86driproto-git')
conflicts=('xf86driproto')
groups=('xorg')
source=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/xorg/proto/xf86driproto"
_gitname="xf86driproto"
build() {
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cd $startdir/src/$_gitname
sh autogen.sh --prefix=/usr
make || return 1
make DESTDIR=${startdir}/pkg install || return 1
libgl-git
pkgname=libgl-git
pkgver=20081224
pkgrel=1
pkgdesc="Mesa DRI OpenGL library and drivers from GIT repository"
arch=(i686 x86_64)
license=('custom')
url="http://mesa3d.sourceforge.net"
depends=('libxxf86vm' 'libdrm>=2.4.3' 'libx11>=1.1.99.2')
makedepends=('imake' 'glproto' 'git')
provides=('libgl=7.2.99')
conflicts=('libgl')
source=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/git/mesa/mesa"
_gitname="mesa"
build() {
cd ${startdir}/src/
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cd $startdir/src/
cp -r ${startdir}/src/$_gitname ${startdir}/src/$_gitname-build || return 1
cd $startdir/src/$_gitname-build/
CONFIG="linux-dri-x86"
if [ "${CARCH}" = "x86_64" ]; then
CONFIG="linux-dri-x86-64"
sed -i -e "s/lib64/lib/g" ${startdir}/src/$_gitname-build/configs/${CONFIG}
fi
echo "EXTRA_LIB_PATH =" >> configs/${CONFIG}
echo "OPT_FLAGS = ${CFLAGS}" >> configs/${CONFIG}
echo "SRC_DIRS = glx/x11 mesa" >> configs/${CONFIG}
rm -f include/GL/glut*h
echo "USING_EGL = 0" >> configs/${CONFIG}
echo "PROGRAM_DIRS =" >> configs/${CONFIG}
echo "MKDEP = makedepend" >> configs/${CONFIG}
echo "DRI_DIRS =" >> configs/${CONFIG}
echo "DRI_DRIVER_SEARCH_DIR = /usr/lib/xorg/modules/dri" >> configs/${CONFIG}
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> configs/${CONFIG}
echo "X11_INCLUDES = `pkg-config --cflags-only-I x11`" >> configs/${CONFIG}
#echo "DEFINES += -DUSE_XCB" >> configs/${CONFIG}
#echo "X11_INCLUDES += `pkg-config --cflags-only-I xcb` `pkg-config --cflags-only-I x11-xcb` `pkg-config --cflags-only-I xcb-glx`" >> configs/${CONFIG}
#echo "GL_LIB_DEPS += `pkg-config --libs xcb` `pkg-config --libs x11-xcb` `pkg-config --libs xcb-glx`" >> configs/${CONFIG}
make ${CONFIG} || return 1
mkdir -p ${startdir}/pkg/usr
make INSTALL_DIR=${startdir}/pkg/usr install
rm -rf ${startdir}/pkg/usr/include
mkdir -p ${startdir}/pkg/usr/lib/xorg/modules/extensions
cd ${startdir}/pkg/usr/lib/xorg/modules/extensions
ln -sf libGLcore.xorg libGLcore.so
ln -sf libglx.xorg libglx.so
rm -r $startdir/src/$_gitname-build
mesa-git
pkgname=mesa-git
pkgver=20081224
pkgrel=1
pkgdesc="Mesa OpenGL Library from GIT repository"
url="http://www.mesa3d.org"
license=""
arch=(x86_64 i686)
depends=('libgl>=7.2.99' 'glproto' 'gcc' 'libxt')
makedepends=('imake' 'git')
conflicts=('mesa-apps' 'mesa')
replaces=('mesa-apps' 'mesa')
provides=('mesa=7.2.99')
backup=()
install=
source=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/git/mesa/mesa"
_gitname="mesa"
build() {
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cd $startdir/src
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd $startdir/src/$_gitname-build
# Any patches you may want to add go here
cd $startdir/src/$_gitname-build
CONFIG="linux-dri-x86"
if [ "${CARCH}" = "x86_64" ]; then
CONFIG="linux-dri-x86-64"
sed -i -e "s/lib64/lib/g" ${startdir}/src/$_gitname-build/configs/${CONFIG}
fi
echo "EXTRA_LIB_PATH =" >> configs/${CONFIG}
echo "OPT_FLAGS = ${CFLAGS}" >> configs/${CONFIG}
echo "SRC_DIRS = glx/x11 glu glw" >> configs/${CONFIG}
rm -f include/GL/glut*h
echo "USING_EGL = 0" >> configs/${CONFIG}
echo "PROGRAM_DIRS =" >> configs/${CONFIG}
echo "MKDEP = makedepend" >> configs/${CONFIG}
echo "DRI_DIRS =" >> configs/${CONFIG}
echo "DRI_DRIVER_SEARCH_DIR = /usr/lib/xorg/modules/dri" >> configs/${CONFIG}
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> configs/${CONFIG}
echo "X11_INCLUDES = `pkg-config --cflags-only-I x11`" >> configs/${CONFIG}
make ${CONFIG} || return 1
mkdir -p ${startdir}/pkg/usr
make INSTALL_DIR=${startdir}/pkg/usr install
install -m644 include/GL/*.h ${startdir}/pkg/usr/include/GL/
cp -r include/GL/* ${startdir}/pkg/usr/include/GL/
rm -f ${startdir}/pkg/usr/lib/libGL.so*
cd progs/xdemos
make glxinfo glxgears
mkdir -p ${startdir}/pkg/usr/bin
install -m755 glxinfo glxgears ${startdir}/pkg/usr/bin/
cd ${startdir}/src/gl-manpages-1.0.1
./configure --prefix=/usr
make || return 1
make DESTDIR=${startdir}/pkg install
rm -r $startdir/pkg/usr/lib/xorg/
rm -r $startdir/src/$_gitname-build
intel-dri-git
pkgname=intel-dri-git
pkgver=20081224
pkgrel=1
pkgdesc="Mesa DRI drivers for Intel chipsets"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
depends=('libdrm>=2.4.3' 'mesa>=7.2.99' 'expat>=2.0')
makedepends=('libdrm>=2.4.3' 'imake' 'mesa>=7.2.99' 'glproto>=1.4.9')
options=('!libtool')
conflicts=('intel-dri')
provides=('intel-dri=7.2.99')
source=()
md5sums=()
license=('custom')
_gitroot="git://anongit.freedesktop.org/git/mesa/mesa"
_gitname="mesa"
build() {
cd ${startdir}/src/
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cd $startdir/src/
cp -r ${startdir}/src/$_gitname ${startdir}/src/$_gitname-build || return 1
cd $startdir/src/$_gitname-build/
CONFIG="linux-dri-x86"
if [ "${CARCH}" = "x86_64" ]; then
CONFIG="linux-dri-x86-64"
sed -i -e "s/lib64/lib/g" ${startdir}/src/$_gitname-build/configs/${CONFIG}
fi
echo "EXTRA_LIB_PATH =" >> configs/${CONFIG}
echo "OPT_FLAGS = ${CFLAGS} -fno-strict-aliasing" >> configs/${CONFIG}
echo "SRC_DIRS = glx/x11 mesa" >> configs/${CONFIG}
rm -f include/GL/glut*h
echo "USING_EGL = 0" >> configs/${CONFIG}
echo "PROGRAM_DIRS =" >> configs/${CONFIG}
echo "MKDEP = makedepend" >> configs/${CONFIG}
echo "DRI_DIRS = i810 i915 i915tex i965" >> configs/${CONFIG}
echo "DRI_DRIVER_SEARCH_DIR = /usr/lib/xorg/modules/dri" >> configs/${CONFIG}
echo "DRI_DRIVER_INSTALL_DIR = /usr/lib/xorg/modules/dri" >> configs/${CONFIG}
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> configs/${CONFIG}
echo "X11_INCLUDES = `pkg-config --cflags-only-I x11`" >> configs/${CONFIG}
make realclean
make ${CONFIG} || return 1
mkdir -p ${startdir}/pkg/usr
cd drivers/dri
make DESTDIR=${startdir}/pkg install || return 1
rm -rf ${startdir}/pkg/usr/local
inputproto
pkgname=inputproto
pkgver=1.5.0
pkgrel=1
pkgdesc="X11 Input extension wire protocol"
arch=(i686 x86_64)
license=('custom')
url="http://xorg.freedesktop.org/"
source=(${url}/releases/individual/proto/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd ${srcdir}/${pkgname}-${pkgver}
./configure --prefix=/usr || return 1
make || return 1
make DESTDIR=${startdir}/pkg install || return 1
install -m755 -d ${pkgdir}/usr/share/licenses/${pkgname}
install -m644 COPYING ${pkgdir}/usr/share/licenses/${pkgname}/ || return 1
pixman
pkgname=pixman
pkgver=0.13.2
pkgrel=1
pkgdesc="Pixman library"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org"
license=()
depends=('glibc')
options=('!libtool')
source=(http://xorg.freedesktop.org/releases/individual/lib/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr --disable-static || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
randrproto
pkgname=randrproto
pkgver=1.2.99.3
pkgrel=1
pkgdesc="X11 RandR extension wire protocol"
arch=('i686' 'x86_64')
license=('custom')
url="http://xorg.freedesktop.org/"
source=(${url}/releases/individual/proto/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd ${srcdir}/${pkgname}-${pkgver}
./configure --prefix=/usr || return 1
make || return 1
make DESTDIR=${pkgdir} install || return 1
install -d -m755 ${pkgdir}/usr/share/licenses/${pkgname}
install -m644 COPYING ${pkgdir}/usr/share/licenses/${pkgname}/ || return 1
xorg-server
pkgname=xorg-server
pkgver=1.5.99.901
pkgrel=1
pkgdesc="X.Org X servers"
arch=('i686' 'x86_64')
license=('custom')
url="http://xorg.freedesktop.org"
depends=('libx11>=1.1.99.2' 'libxkbui>=1.0.2' 'libgl' 'libxfont>=1.3.3' 'openssl>=0.9.8h' 'libxxf86misc>=1.0.1' 'libpciaccess>=0.10.5' 'libxv>=1.0.4' 'libxaw>=1.0.4' 'pixman>=0.11.10' 'hal>=0.5.11' 'xcursor-themes' 'xkeyboard-config>=1.3' 'xorg-server-utils' 'xorg-utils' 'xorg-fonts-misc' 'xbitmaps' 'libdrm>=2.3.1' 'diffutils' 'xf86-input-evdev')
makedepends=('glproto>=1.4.9' 'xf86driproto>=2.0.4' 'mesa>=7.2.99' 'randrproto>=1.2.99.3' 'renderproto>=0.9.3' 'scrnsaverproto>=1.1.0' 'fontsproto>=2.0.2' 'videoproto>=2.2.2' 'compositeproto>=0.4' 'trapproto>=3.4.3' 'resourceproto>=1.0.2' 'xineramaproto>=1.1.2' 'evieext>=1.0.2' 'libxkbfile>=1.0.5' 'libxmu>=1.0.4' 'libxpm>=3.5.7' 'libxxf86dga>=1.0.2' 'inputproto>=1.4.4' 'xcmiscproto>=1.1.2' 'bigreqsproto' 'libdrm=2.4.3' 'xtrans' 'pixman>=0.13.2' 'inputproto>=1.5.0')
options=('!libtool')
provides=('x-server')
groups=('xorg')
install=xorg-server.install
source=(${url}/releases/individual/xserver/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
# Fix dbus config path
sed -i -e 's/\$(sysconfdir)/\/etc/' config/Makefile.* || return 1
./configure --prefix=/usr \
--enable-ipv6 \
--enable-dri \
--disable-dmx \
--enable-xvfb \
--enable-xnest \
--enable-composite \
--enable-xcsecurity \
--enable-xorg \
--enable-xtrap \
--enable-xevie \
--enable-xephyr \
--enable-glx-tls \
--enable-xorgcfg \
--enable-kdrive \
--enable-install-setuid \
--enable-config-hal \
--enable-config-dbus \
--disable-xfbdev \
--disable-xfake \
--disable-xsdl \
--disable-kdrive-vesa \
--disable-dri2 \
--disable-xprint \
--disable-static \
--sysconfdir=/etc/X11 \
--localstatedir=/var \
--with-default-font-path=/usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1 \
--with-xkb-path=/usr/share/X11/xkb \
--with-xkb-output=/var/lib/xkb \
--with-dri-driver-path=/usr/lib/xorg/modules/dri || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
rm -rf "${pkgdir}/var/log" || return 1
install -m755 -d "${pkgdir}/etc/X11" || return 1
install -m755 -d "${pkgdir}/var/lib/xkb" || return 1
# No longer needed, but as nvidia-utils mangles these files,
# keep them like this so they can be restored
mv "${pkgdir}/usr/lib/xorg/modules/libwfb.so" \
"${pkgdir}/usr/lib/xorg/modules/libwfb.so.1.4" || return 1
# Needed for non-mesa drivers, libgl will restore it
mv "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.so" \
"${pkgdir}/usr/lib/xorg/modules/extensions/libglx.xorg" || return 1
mv "${pkgdir}/usr/lib/xorg/modules/extensions/libdri.so" \
"${pkgdir}/usr/lib/xorg/modules/extensions/libdri.xorg" || return 1
install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/" || return 1
xorg-server.install
post_install() {
rm -f usr/lib/xorg/modules/libwfb.so
ln -sf libwfb.so.1.4 usr/lib/xorg/modules/libwfb.so
cmp usr/lib/xorg/modules/extensions/libdri.so usr/lib/xorg/modules/extensions/libglx.xorg >/dev/null 2>&1 && rm -f usr/lib/xorg/modules/extensions/libdri.so
# If the symlink is dead or non-existent, remove it and make a new one
if [ ! -e usr/lib/xorg/modules/extensions/libdri.so ]; then
rm -f usr/lib/xorg/modules/extensions/libdri.so
ln -sf libdri.xorg usr/lib/xorg/modules/extensions/libdri.so
fi
post_upgrade() {
if [ "`vercmp $2 1.4.99.906`" -lt 0 ]; then
cat << _EOF
Input device handling has changed in xorg-server 1.5.
Please read http://wiki.archlinux.org/index.php/Xorg_input_hotplugging.
_EOF
fi
post_install
post_remove() {
rm -f /usr/lib/xorg/modules/libwfb.so
# If the symlink is dead, remove it
if [ ! -e usr/lib/xorg/modules/extensions/libdri.so ]; then
rm -f usr/lib/xorg/modules/extensions/libdri.so
fi
xf86-video-intel
pkgname=xf86-video-intel
pkgver=2.5.99.2
pkgrel=1
pkgdesc="X.org Intel i810/i830/i915/945G/G965+ video drivers"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
depends=('intel-dri>=7.2.99' 'libpciaccess>=0.10.5' 'libdrm>=2.4.3')
makedepends=('pkgconfig' 'xorg-server>=1.5.99.3' 'xf86driproto>=2.0.4' 'glproto>=1.4.9' 'mesa>=7.2.99' 'libdrm=2.4.3')
conflicts=('xorg-server<1.5.99.3' 'xf86-video-i810')
replaces=('xf86-video-i810')
options=('!libtool' 'force')
groups=('xorg-video-drivers')
source=(${url}/releases/individual/driver/${pkgname}-${pkgver}.tar.bz2)
md5sums=()
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr \
--enable-dri || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
xf86-input-evdev
pkgname=xf86-input-evdev
pkgver=2.1.0
pkgrel=1
pkgdesc="X.org evdev input driver"
arch=(i686 x86_64)
url="http://xorg.freedesktop.org/"
license=('custom')
depends=('glibc')
makedepends=('pkgconfig' 'xorg-server>=1.5.99.3' 'inputproto>=1.5.0' 'randrproto>=1.2.99.3')
options=('!libtool')
groups=('xorg-input-drivers')
source=(${url}/releases/individual/driver/${pkgname}-${pkgver}.tar.bz2)
md5sums=('a6070ead29b2d81b5b386a96df2661b8')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr || return 1
make || return 1
make DESTDIR="${pkgdir}" install || return 1
install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/" || return 1
Last edited by mutlu_inek (2009-01-15 02:45:22)

Tearing on VGA output, LVDS OK on 950GMA with xf86-video-intel-2.6.10

I'm crossposting this message i sent on intel-graphics ml and xorg bugzilla, because maybe some of you can point me to a solution.
i own an asus eeepc1005ha, it uses intel gma 950.
Playing a video on the internal LVDS panel is very pleasing and tear
free, but as soon as i connect the vga output, i can notice tearing or
flickering on the picture.
I tried all possible configurations:
-Booting with the lid open (tty on LVDS) and then switching to xorg
with a VGA only output. (VGA tears)
-Booting with the lid closed (tty on VGA) and using xorg on VGA. (VGA tears)
-VGA+LVDS in clone mode (VGA and LVDS tears)
-VGA+LVDS in multihead mode (expanded desktop) (VGA and LVDS tears)
Using xv adaptor via mplayer results in a different tear effect, seems
more like a flickering, while the GL output definitely tears.
I couldn't try overlay adaptor because i don't have a 2.6.33 kernel yet
(believe it or not, i've seen overlay tearing too with an old intel
driver in the past, i think 2.7.1, in a cloned mode if lvds was at
60hz, while vga was at 70hz)
I'm using xf86-video-intel 2.10.0 and kernel 2.6.32.9
I used the framerate test videos available here:
http://spng.se/frame-rate-test/
Thanks for reading.
Last edited by kokoko3k (2010-03-07 08:23:48)

You're right, here's the references:
http://lists.freedesktop.org/archives/i … 06092.html
http://bugs.freedesktop.org/show_bug.cgi?id=26925
About your command, i'll try, but what it does is just picking the first port from first adaptor, right?
By now (xf86-video-intel 2.10.0 and kernel 2.6.32.9), we just have a single adaptor, the textured one;
why the first port should make a difference?
Maybe with your setup the overlay adaptor was picked, and in 99% of the cases that would certanly help.
As a side note, newer mplayer versions comes with an useful option: -vo xv:adaptor=#
What i think is that vblank interrupts generation is (and was) messed up in the drivers code.
see:
(believe it or not, i've seen overlay tearing too with an old intel
driver in the past, i think 2.7.1, in a cloned mode if lvds was at
60hz, while vga was at 70hz)

[Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

Hi everyone,
since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
I have no clue how to fix this. Any help would be much appreciated!
Greetings,
Oliver
Last edited by okraits (2014-08-08 06:33:09)

lolilolicon wrote:
How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
If you simply use `startx`, the actual process running will be something like
/usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
Edit
In my log there's something yours are missing
[ 45.465] (++) using VT number 1
[ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
I login at tty1 (which is the first one visible after boot) and run startx from there.
I added the following to my .xinitrc:
echo "vt: $XDG_VTNR"
The output was:
vt: 1
That would be ok, right? Or is it $XDG_VTNR + 1?
So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
Last edited by okraits (2014-08-07 12:37:17)

Xf86-video-intel vs hibernate

I have recently updated by laptop with xorg7.3 (ie, xorg-server 1.4 +
xf86-video-intel (instead of xf86-video-i810) + xrand 1.2). After a
long struggling period I have managed to make all these new things
working reasonably well on my Dell X1 laptop. However I still have
one open issue: hibernate scripts no longer work. The laptop hibernate
correctly. It also to wake up but X crashes when it restarts with the
following error message:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
Ring at virtual 0xa79b1000 head 0x0 tail 0x10 count 4
0001ff80: 00000000
0001ff84: 00000000
0001ff88: 00000000
0001ff8c: 00000000
0001ff90: 00000000
0001ff94: 00000000
0001ff98: 00000000
0001ff9c: 00000000
0001ffa0: 00000000
0001ffa4: 00000000
0001ffa8: 00000000
0001ffac: 00000000
0001ffb0: 00000000
0001ffb4: 00000000
0001ffb8: 00000000
0001ffbc: 00000000
0001ffc0: 00000000
0001ffc4: 00000000
0001ffc8: 00000000
0001ffcc: 00000000
0001ffd0: 00000000
0001ffd4: 00000000
0001ffd8: 00000000
0001ffdc: 00000000
0001ffe0: 00000000
0001ffe4: 00000000
0001ffe8: 00000000
0001ffec: 00000000
0001fff0: 00000000
0001fff4: 00000000
0001fff8: 00000000
0001fffc: 00000000
00000000: 02000011
Ring end
space: 131048 wanted 131064
FatalError re-entered, aborting
lockup
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
Is there any body here that could give some hints? Thanks in advance.
Manuel
Here is a description of my config:
Laptop: DELL X1
Kernel: 2.6.23.1
Video driver: Intel i915
xorg-server: 1.4
xf86-video-intel: 2.1.1-2
Xorg.conf:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
#* Default Layout */
Section "ServerLayout"
Identifier "Default"
Screen 0 "Default" 0 0
Option    "AIGLX" "true"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "SendCoreEvents"
InputDevice "Synaptics" "SendCoreEvents"
#* !!! WARNING */
#* xorg <=7.2 used AlwaysCore. */
#* It has been replaced in xorg-7.3 with SendCoreEvents */
#* InputDevice "USB Mouse" "AlwaysCore" */
#* InputDevice "Synaptics" "AlwaysCore" */
EndSection
#* Server flags */
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
#* Files */
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/MathML"
# FontPath "/usr/share/fonts/ttf-bitstream-vera"
EndSection
#* DRI */
Section "DRI"
Mode 0666
EndSection
#* Modules */
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "type1"
Load "freetype"
Load "record"
Load    "vbe"
Load "synaptics"
Load "int10"
EndSection
#* Xorg extensions */
Section "Extensions"
Option "Composite" "Enable"
Option    "GLX" "Enable"
Option "RENDER" "Enable"
EndSection
#* Keyboard */
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "inspiron"
Option "XkbLayout" "us,fr"
Option "XKbOptions" "grp:alt_shift_toggle"
EndSection
#* Mice */
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "SHMConfig" "on"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5150"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.25"
Option "AccelFactor" "0.0020"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option    "LTCornorButton" "0"
#Option    "LBCornorButton" "0"
#Option    "RTCornorButton" "0"
#Option    "RBCornorButton" "0"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/misc/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option    "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
#* Screen */
Section "Screen"
Identifier "Default"
Device "intel"
Option "XAANoOffscreenPixmaps"
Monitor "generic"
DefaultColorDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#* Graphic card */
#* !!! WARNING */
#* xorg <=7.2 used i810 video driver. */
#* It has been replaced in xorg-7.3 with xf86-video-intel */
Section "Device"
Identifier "intel"
Driver    "intel"
BusID    "PCI:0:2:0"
Screen 0
VideoRam 131072
Option "DPMS" "true"
Option "DDC" "true"
Option "XVideo" "true"
Option    "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
#* Monitor */
Section "Monitor"
Identifier "generic"
HorizSync 27 - 96
VertRefresh 40 - 160
Option "DPMS"
Option "Enable" "true"
EndSection
#* Modes */
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
EndSection
Section "Modes"
Identifier "Modes[1]"
ModeLine "1600x1024" 127.34 1600 1672 2032 2176 1024 1026 1038 1064
ModeLine "1600x1024" 125.02 1600 1672 2032 2176 1024 1026 1038 1064
ModeLine "1280x1024" 99.28 1280 1336 1616 1728 1024 1026 1038 1064
EndSection
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
.xinitrc file:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
#*=====================================================================*/
#* serrano/house/X/xrandr.sgi-1600x1024 */
#* Author : Manuel Serrano */
#* Creation : Wed Nov 7 11:35:38 2007 */
#* Last change : Sun Nov 11 08:44:36 2007 (serrano) */
#* Copyright : 2007 Manuel Serrano */
#* Using xrandr 1.2 to select the VGA output */
#*=====================================================================*/
mode=`xrandr | \
grep "VGA connected" | \
awk '{print $3}' | \
sed -e "s/+[0-9]+[0-9]//"`
if [ "$X_VGA_LAYOUT " != " " ]; then
mode=$X_VGA_LAYOUT;
fi
if [ "$?" = "0" -a "$mode " != " " ]; then
xrandr --output LVDS --off
xrandr --newmode 1600x1024 108.00 1600 1616 1656 1704 1024 1027 1030 1056 -hsync -vsync
xrandr --addmode VGA 1600x1024
xrandr --output VGA --mode 1600x1024
else
xrandr --output LVDS --on
fi
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
The X log that shows the problem:
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/smith:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux smith 2.6.23.1 #1 Sun Oct 21 23:05:01 CEST 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 11 08:14:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default"
(**) |-->Screen "Default" (0)
(**) | |-->Monitor "generic"
(**) | |-->Device "intel"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) |-->Input Device "Synaptics"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/MathML,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "GLX" is enabled
(**) Extension "RENDER" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1028,01a3 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2592 card 1028,01a3 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2792 card 1028,01a3 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1028,01a3 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1028,01a3 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1028,01a3 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1028,01a3 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1028,01a3 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1028,01a3 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 14f1,5423 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1028,01a3 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1028,01a3 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1028,01a3 rev 03 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 14e4,1677 card 1028,01a3 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 1180,0476 card 2000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 1180,0552 card 1028,01a3 rev 08 class 0c,00,10 hdr 80
(II) PCI: 02:01:2: chip 1180,0822 card 1028,01a3 rev 17 class 08,05,01 hdr 80
(II) PCI: 02:03:0: chip 8086,4220 card 8086,2721 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x60000000 - 0x63ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x0740 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x60000000 - 0x63ffffff (0x4000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff00000/19, 0xc0000000/28, 0xdfec0000/18, I/O @ 0xec38/3
(--) PCI: (0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[1] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[2] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[3] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[4] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[5] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[7] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[8] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[11] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[12] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[14] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[18] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[19] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[20] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[24] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[25] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[1] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[2] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[3] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[4] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[5] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[6] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[7] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[8] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[11] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[12] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[14] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[18] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[19] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[20] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[21] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[22] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[23] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[24] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[25] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[5] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[6] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[8] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[9] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[12] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[18] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[24] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[25] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[26] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[30] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[31] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 2.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[5] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[6] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[8] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[9] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[12] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[18] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[24] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[25] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[26] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[28] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[29] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[30] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[31] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[5] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[6] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[8] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[9] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[12] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[23] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[27] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[28] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[29] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[30] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[31] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[32] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[33] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[34] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(**) intel(0): Option "XVideo" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section generic
(**) intel(0): Option "Enable" "true"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(**) intel(0): Option "ddc" "true"
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) intel(0): DDCModeFromDetailedTiming: 1280x768 Warning: We only handle seperate sync.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VbeVersion is 768, OemStringPtr is 0x00002100,
OemVendorNamePtr is 0x0000213d, OemProductNamePtr is 0x0000214f,
OemProductRevPtr is 0x0000217d
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(**) intel(0): Option "ddc" "true"
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SGX", prod id 1601
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1024"x0.0 108.00 1600 1616 1656 1704 1024 1027 1030 1056 -hsync -vsync (63.4 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
(II) intel(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) intel(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "SGX", prod id 1601
(**) intel(0): Option "ddc" "true"
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) intel(0): DDCModeFromDetailedTiming: 1280x768 Warning: We only handle seperate sync.
(II) intel(0): Output VGA enabled by config file
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output VGA using initial mode 1600x1024
(II) intel(0): Output LVDS using initial mode 1280x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (370, 240) mm
(**) intel(0): DPI set to (140, 216)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x400c0c00 to 0x000c0c00
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x80000d63 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0001e1e2 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x0000f0f1 to 0x00014141
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfec0000 - 0xdfefffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xdff00000 - 0xdff7ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xdfcff000 - 0xdfcfffff (0x1000) MX[b]
[8] -1 0 0xdfcfe700 - 0xdfcfe7ff (0x100) MX[b]
[9] -1 0 0xdfcfe800 - 0xdfcfefff (0x800) MX[b]
[10] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b]
[11] -1 0 0xdfebfd00 - 0xdfebfdff (0x100) MX[b]
[12] -1 0 0xdfebfe00 - 0xdfebffff (0x200) MX[b]
[13] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[14] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[b](B)
[15] -1 0 0xdfec0000 - 0xdfefffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xdff00000 - 0xdff7ffff (0x80000) MX[b](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[21] 0 0 0x0000ec38 - 0x0000ec3f (0x8) IS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[25] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[27] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[b]
[31] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
[32] -1 0 0x0000ec40 - 0x0000ec7f (0x40) IX[b]
[33] -1 0 0x0000ed00 - 0x0000edff (0x100) IX[b]
[34] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[35] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[36] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[37] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[38] -1 0 0x0000ec38 - 0x0000ec3f (0x8) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(WW) intel(0): VideoRam configuration found, which is no longer recommended.
(II) intel(0): Continuing with default 262144kB VideoRam instead of 131072 kB.
(II) intel(0): Kernel reported 301312 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1205244 kB available
(**) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
   large DRI memory manager reservation:
(II) intel(0): Allocating 7164 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x 4f820000 physical)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB, 0x 4f832000 physical)
(II) intel(0): 0x00040000-0x04837fff: front buffer (73696 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x04838000-0x04847fff: xaa scratch (64 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (16384 kB)
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (16384 kB)
(II) intel(0): 0x07000000-0x08ffffff: DRI memory manager (32768 kB)
(II) intel(0): 0x09000000-0x0affffff: textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xc0040000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xdff00000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] init sarea width,height = 2048 x 2048 (pitch 2048)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x28008000
(II) intel(0): [drm] Back Buffer = 0xc5000000
(II) intel(0): [drm] Depth Buffer = 0xc6000000
(II) intel(0): [drm] textures = 0xc9000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "XaaNoOffscreenPixmaps"
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04838000 (pgoffset 18488)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x09000000 (pgoffset 36864)
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) intel(0): Option "Enable" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 370 x 237
select returned 1
(II) USB Mouse: ps2EnableDataReporting: succeeded
(**) intel(0): Option "ddc" "true"
(II) intel(0): EDID vendor "SGX", prod id 1601
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1024"x0.0 108.00 1600 1616 1656 1704 1024 1027 1030 1056 -hsync -vsync (63.4 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
(II) intel(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) intel(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "SGX", prod id 1601
(**) intel(0): Option "ddc" "true"
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) intel(0): DDCModeFromDetailedTiming: 1280x768 Warning: We only handle seperate sync.
(**) intel(0): Option "ddc" "true"
(II) intel(0): EDID vendor "SGX", prod id 1601
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1024"x0.0 108.00 1600 1616 1656 1704 1024 1027 1030 1056 -hsync -vsync (63.4 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
(II) intel(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) intel(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) intel(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "SGX", prod id 1601
(**) intel(0): Option "ddc" "true"
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) intel(0): DDCModeFromDetailedTiming: 1280x768 Warning: We only handle seperate sync.
select returned 0
select returned 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04838000 (pgoffset 18488)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x09000000 (pgoffset 36864)
Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x4ffc0001 pgetbl_err: 0x0
ipeir: 0 iphdr: 7dc41ddc
LP ring tail: 8 head: 0 len: 1f001 start 0
eir: 0 esr: 0 emr: ffff
instdone: ffc1 instpm: 0
memmode: 108 instps: 14cf
hwstam: ffff ier: 2 imr: ffff iir: 0
Ring at virtual 0xa79b1000 head 0x0 tail 0x8 count 2
0001ff80: 00000000
0001ff84: 00000000
0001ff88: 00000000
0001ff8c: 00000000
0001ff90: 00000000
0001ff94: 00000000
0001ff98: 00000000
0001ff9c: 00000000
0001ffa0: 00000000
0001ffa4: 00000000
0001ffa8: 00000000
0001ffac: 00000000
0001ffb0: 00000000
0001ffb4: 00000000
0001ffb8: 00000000
0001ffbc: 00000000
0001ffc0: 00000000
0001ffc4: 00000000
0001ffc8: 00000000
0001ffcc: 00000000
0001ffd0: 00000000
0001ffd4: 00000000
0001ffd8: 00000000
0001ffdc: 00000000
0001ffe0: 00000000
0001ffe4: 00000000
0001ffe8: 00000000
0001ffec: 00000000
0001fff0: 00000000
0001fff4: 00000000
0001fff8: 00000000
0001fffc: 00000000
00000000: 02000011
Ring end
space: 131056 wanted 131064
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8c8a000 at 0xb7b25000
(II) intel(0): [drm] Closed DRM master.
Fatal server error:
lockup
(II) AIGLX: Suspending AIGLX clients for VT switch
Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x4ffc0001 pgetbl_err: 0x0
ipeir: 0 iphdr: 7dc41ddc
LP ring tail: 10 head: 0 len: 1f001 start 0
eir: 0 esr: 0 emr: ffff
instdone: ffc1 instpm: 0
memmode: 108 instps: 14cf
hwstam: ffff ier: 2 imr: ffff iir: 0
Ring at virtual 0xa79b1000 head 0x0 tail 0x10 count 4
0001ff80: 00000000
0001ff84: 00000000
0001ff88: 00000000
0001ff8c: 00000000
0001ff90: 00000000
0001ff94: 00000000
0001ff98: 00000000
0001ff9c: 00000000
0001ffa0: 00000000
0001ffa4: 00000000
0001ffa8: 00000000
0001ffac: 00000000
0001ffb0: 00000000
0001ffb4: 00000000
0001ffb8: 00000000
0001ffbc: 00000000
0001ffc0: 00000000
0001ffc4: 00000000
0001ffc8: 00000000
0001ffcc: 00000000
0001ffd0: 00000000
0001ffd4: 00000000
0001ffd8: 00000000
0001ffdc: 00000000
0001ffe0: 00000000
0001ffe4: 00000000
0001ffe8: 00000000
0001ffec: 00000000
0001fff0: 00000000
0001fff4: 00000000
0001fff8: 00000000
0001fffc: 00000000
00000000: 02000011
Ring end
space: 131048 wanted 131064
FatalError re-entered, aborting
lockup
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----

Thanks to several remarks and suggestions I have found in this forum, I have been
able to fix this problem. Commenting out the VBE section of my /etc/hibernate/common.conf
file did it. That is, after commenting the following lines,
### vbetool
#EnableVbetool yes
#RestoreVbeStateFrom /var/lib/vbetool/vbestate
#VbetoolPost yes
#RestoreVCSAData yes
hibernation works as it used to. Suspend to disk and suspend to ram are both
operational (with a vanilla kernel 2.6.23.1).
Manuel

Firefox box around zoomed out images issue w/ (xf86-video-intel)

When I zoomout on a page firefox displays a insetted box around my images.
Most notably in my webmail client, however it happens even on the forums if I zoomout.
Regualar zoom: http://world.pyther.net/files/Firefox/regular_zoom.png (The way it should look)
Zoomed Out: http://world.pyther.net/files/Firefox/zoom_out.png (Inset boxes around images)
This happens with both the offical arch build of firefox and the spookyet build. I have no idea how to fix this, it is very annoying!
Any help would be great!
EDIT:
After doing some more research I have narrowed this down to being an issue with xf86-video-intel. The problem does not happen if I use the xf86-video-vesa driver. I have filed a bug report at https://bugzilla.mozilla.org/show_bug.cgi?id=468366
Last edited by pyther (2008-12-07 21:37:12)

Bug reported, anyone thing I need to add anything else?
https://bugzilla.mozilla.org/show_bug.cgi?id=414928

Xf86-video-intel doesn't work for direct rendering

With xf86-video-intel, I can't use direct rendering. With LIBGL_DEBUG=verbose, glxinfo says this:
libGL: XF86DRIGetClientDriverName: 1.9.0 i915 (screen 0)
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri//i915_dri.so
libGL error: dlopen /usr/lib/xorg/modules/dri//i915_dri.so failed (/usr/lib/xorg/modules/dri//i915_dri.so: undefined symbol: _glapi_tls_Context)
libGL error: unable to load driver: i915_dri.so
And, everything that tries to use 3d segfaults just before it closes, presumably when it unloads the driver.

tavianator wrote:
tavianator@antimatter> pacman -Q libdrm ~
libdrm 2.3.0-1
tavianator@antimatter> pacman -Q mesa ~
mesa 7.0.3rc2-1
tavianator@antimatter> pacman -Q xf86-video-intel ~
xf86-video-intel 2.3.0-2
tavianator@antimatter> pacman -Q xorg-server ~
xorg-server 1.4.0.90-9
tavianator@antimatter> uname -r ~
2.6.24-ARCH
tavianator@antimatter>
I compiled the latest xf86-video-intel from source, but the same thing happens with 2.2.1-2, and xf86-video-i810.
xorg-server is compiled with tls support (thread local storage, --enable-glx-tls). Your xserver is looking for a tls version of the dri driver but the driver is compiled without tls support.
If you have libgl installed and you are not using custom packages, everything should works. I'm currently using my custom packages but i tried with the extra repo too, everything works as expected.
[lexiw@stroggos ~]$ grep tls /var/abs/extra/xorg-server/PKGBUILD
--enable-glx-tls \
[lexiw@stroggos ~]$ grep TLS /var/abs/extra/mesa/PKGBUILD
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> configs/${CONFIG}
[lexiw@stroggos ~]$ grep TLS /var/abs/extra/libgl/PKGBUILD
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> configs/${CONFIG}
[lexiw@stroggos ~]$ grep TLS /var/abs/extra/xf86-video-intel/PKGBUILD
echo "ARCH_FLAGS += -DGLX_USE_TLS" >> ${CONFIG}
My system:
[lexiw@stroggos ~]$ pacman -Q libdrm
libdrm 2.3.0-1
[lexiw@stroggos ~]$ pacman -Q mesa
mesa 7.0.3-1
[lexiw@stroggos ~]$ pacman -Q xf86-video-intel
xf86-video-intel 2.3.0-1
[lexiw@stroggos ~]$ pacman -Q xorg-server
xorg-server 1.4.0.90-10
[lexiw@stroggos ~]$ uname -r
2.6.25-ARCH
[lexiw@stroggos ~]$ pacman -Q libgl
libgl 7.0.3-1
Never had any problem with the official packages (even with kernel 2.6.24), every time i had the "tls problem" it was my fault for recompiling with the wrong flags.
Last edited by lexiw (2008-05-03 13:30:25)

Lenovo T400 (4500MHD): Xorg 7.4, xf86-video-intel-2.4.3 upgrade

hi!
I would like to ask you if anyone with an lenovo t400 has done a successful upgrade to xorg 7.4 with xf86-video-intel-2.4.3 and intel-dri-7.2-1. I'm still using xf86-video-intel-2.3.2-1 and intel-dri-7.0.3-1, though I'm not completely satisfied with it (sometimes X does not start, suspend doesn't work anymore).
I've read a lot about upgrading troubles and I would really appreciate sharing your experience.
thanks in advance,
woifi

woifi,
I have the same machine and the upgrade to Xorg and xf86-video-intel make my machine not able to come back from a suspend/hibernate. The screen comes back, but everything is frozen. I have been able, however, to use the "vesa" driver in Xorg and get suspend/hibernate to work then. I can't use Compiz then, but I would rather have suspend than Compiz at this point. I'm hoping that the novelty of this machine and the Intel GMA 4500HD are causing the wrinkles in the drivers.

[upstr] textdisplay problems after update to xf86-video-intel-2.99.911

Hardware: Intel 855GM integrated graphics. Driver: xf86-video-intel
Versions
* xf86-video-intel-2.99.911-1-i686
* xf86-video-intel-2.99.911-2-i686 (current)
produce display errors on http://www.faz.net/ in Firefox (using a fresh profile results in same error) under KDE4, TWM, openbox and LXDE. See article text screenshot http://i.imgur.com/xV4sxni.png. Missing text lines, in the headlines on hover, in the main text after load but more severe after scrolling a bit. Everything else displays fine (images, firefox' GUI).
The error does also occur under another user account (with nearly standard settings) in KDE4 (same computer). All packages up to date.
NO errors with xf86-video-intel-2.99.910-1-i686 (to which I have downgraded now). With this and the older versions I had no such problems since months.
NO errors in other programs like Chromium or Konqueror (but did not test that much, Firefox is what I use often).
Note that SNA cannot be a issue since my hardware is older and it worked after the given (in the wiki) date.
Should I report this as a bug against this package? Does anyone have any tips or even being able to reproduce? Thank you all!
(Edit 1 and 2: error also happens under openbox, not sure why I did not see it during the first try.)
Last edited by CarlEitsger (2014-04-10 19:35:26)

Thanks, Andy. Yes I tried with the -2 version, it has the same problem.
I did not find any previous upstream reports matching this problem. I also did not find any other mentions of this problem anywhere else. Okay I will try to report it there upstream in the next few days.

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

Xf86-video-intel not not working with intel 82852/855GM graphics card

I am runing arch linux on a toshiba satilite r15 s829 and have the xf86-video-intel driver installed but Xorg does mot seem to be able to use it with my intel graphics card.
output of lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
01:0b.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:0b.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
01:0b.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
xorg onfig file: 10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
#Option "RandRRotation" "true"
VendorName "Intel Corp."
BoardName "82852/855GM Integrated Graphics Device"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
#Option "RandRRotation" "true"
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Xorg log file: Xorg.0.log
[ 2900.308]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 2900.308] X Protocol Version 11, Revision 0
[ 2900.308] Build Operating System: Linux 2.6.37-ARCH i686
[ 2900.308] Current Operating System: Linux dragonL 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 09:07:57 UTC 2011 i686
[ 2900.309] Kernel command line: BOOT_IMAGE=(hd0,msdos1)//boot/vmlinuz26 root=/dev/disk/by-uuid/0cfdcd8b-eae7-4dbd-8dd6-0ff955089587 rootfstype=ext2 ro nomodeset add_efi_memmap
[ 2900.309] Build Date: 04 February 2011 09:39:45PM
[ 2900.309]
[ 2900.309] Current version of pixman: 0.20.2
[ 2900.309] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2900.309] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2900.310] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 25 12:15:42 2011
[ 2900.310] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2900.310] (==) No Layout section. Using the first Screen section.
[ 2900.310] (**) |-->Screen "Screen0" (0)
[ 2900.310] (**) | |-->Monitor "Monitor0"
[ 2900.311] (**) | |-->Device "Card0"
[ 2900.311] (==) Automatically adding devices
[ 2900.311] (==) Automatically enabling devices
[ 2900.311] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2900.311] Entry deleted from font path.
[ 2900.311] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2900.311] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2900.311] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2900.311] (II) Loader magic: 0x81f3040
[ 2900.311] (II) Module ABI versions:
[ 2900.311] X.Org ANSI C Emulation: 0.4
[ 2900.311] X.Org Video Driver: 8.0
[ 2900.311] X.Org XInput driver : 11.0
[ 2900.311] X.Org Server Extension : 4.0
[ 2900.312] (--) PCI:*(0:0:2:0) 8086:3582:1179:0037 rev 2, Mem @ 0xd8000000/134217728, 0xd0000000/524288, I/O @ 0x0000eff8/8
[ 2900.312] (--) PCI: (0:0:2:1) 8086:3582:1179:0037 rev 2, Mem @ 0x40000000/134217728, 0x4c000000/524288
[ 2900.312] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2900.312] (II) LoadModule: "extmod"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2900.312] (II) Module extmod: vendor="X.Org Foundation"
[ 2900.312] compiled for 1.9.4, module version = 1.0.0
[ 2900.312] Module class: X.Org Server Extension
[ 2900.312] ABI class: X.Org Server Extension, version 4.0
[ 2900.312] (II) Loading extension MIT-SCREEN-SAVER
[ 2900.312] (II) Loading extension XFree86-VidModeExtension
[ 2900.312] (II) Loading extension XFree86-DGA
[ 2900.312] (II) Loading extension DPMS
[ 2900.312] (II) Loading extension XVideo
[ 2900.312] (II) Loading extension XVideo-MotionCompensation
[ 2900.312] (II) Loading extension X-Resource
[ 2900.312] (II) LoadModule: "dbe"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2900.313] (II) Module dbe: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension DOUBLE-BUFFER
[ 2900.313] (II) LoadModule: "glx"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2900.313] (II) Module glx: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (==) AIGLX enabled
[ 2900.313] (II) Loading extension GLX
[ 2900.313] (II) LoadModule: "record"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2900.313] (II) Module record: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.13.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension RECORD
[ 2900.313] (II) LoadModule: "dri"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2900.314] (II) Module dri: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.0.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension XFree86-DRI
[ 2900.314] (II) LoadModule: "dri2"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2900.314] (II) Module dri2: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.2.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension DRI2
[ 2900.314] (II) LoadModule: "intel"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2900.314] (II) Module intel: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 2.14.0
[ 2900.314] Module class: X.Org Video Driver
[ 2900.314] ABI class: X.Org Video Driver, version 8.0
[ 2900.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 2900.314] (--) using VT number 7
[ 2900.324] (EE) No devices detected.
[ 2900.324]
Fatal server error:
[ 2900.324] no screens found
[ 2900.324]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2900.324] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2900.324]

Please use [ code ] tags for pasting code https://bbs.archlinux.org/help.php#bbcode as it makes your posts much easier to read.
There's a problem with old Intel cards and the current Intel drivers. Unfortunately using older drivers means downgrading xorg-server and friends. Read about downgrading in the wiki.
I'm currently using xf86-video-intel 2.13.0-4 and xorg-server 1.9.4-1 and things are OK. My card
[karol@black ~]$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Last edited by karol (2011-04-25 21:16:37)

Xorg + xf86-video-intel lags with compiz / high cpu usage without it

I have recently noticed that my X server lags. It happens approximately once per second (it's fairly regular) and it can be easily observed when watching movies, dragging windows or rotating cube. Screen just hangs for some milliseconds. Lags are bigger and happens more often when many windows are opened.
Even worse things happen when I'm _not_ running compiz. X's cpu usage spikes permanently up to 30-40% and lags are even more noticable.
My hardware:
Laptop with Intel GMA 950
Configuration
I tried some different xorg.confs but it seems to be irrevelant. It happens even on plain conf created by 'Xorg -configure'
xorg-server 1.5.3-3
mesa 7.2-1
xf86-video-intel 2.4.3-1
kernel26 2.6.27.8-1
I also tried downgrading these packages to
xorg-server 1.4.2-2
mesa 7.0.3-3
xf86-video-intel 2.3.2-1
kernel26 2.6.27-1
and it seems to resolve cpu usage problem but not the lags.
Does anybody know what might cause these lags? It's really annoying.

It turned out that color depth was the issue. I think that 24bit is too big for my graphics card and compiz (although I remember that i810+24bit+compiz worked fine).
So changing DefaultDepth in xorg.conf to 16 fixed the problem. Is there any other way to workaround this without decreasing color depth?

Using OpenGL 3+ with intel xf86-video-intel

I'm running Arch on a 2008 macbook with the following graphics card:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
I need to get OpenGL 3+ working on my computer for a class, but whever I try to run a program, the linkage fails.
According to glxinfo, I have the following versions running:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 10.0.2
OpenGL shading language version string: 1.20
OpenGL extensions:
I'm trying to run a cpp program with basic headers (and simple shaders)
#include <GL/glew.h>
#include <GL/freeglut.h>
#include <glm/glm.hpp>
and get the following message with the env variable LIBGL_DEBUG=verbose:
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
Shader 1 (vertex shader) compile log:
0:3(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, and 1.00 ES
Shader 2 (fragment shader) compile log:
0:3(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, and 1.00 ES
I have updated packages for:
local/iasl 20130823-1
Intel ACPI Source Language compiler
local/intel-dri 10.0.2-1
Mesa drivers for Intel
local/xf86-video-intel 2.99.907-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/glu 9.0.0-2
Mesa OpenGL Utility library
local/intel-dri 10.0.2-1
Mesa drivers for Intel
local/libtxc_dxtn 1.0.1-5
S3 Texture Compression (S3TC) library for Mesa
local/mesa 10.0.2-1
an open-source implementation of the OpenGL specification
local/mesa-demos 8.1.0-1
Mesa demos and tools
local/mesa-libgl 10.0.2-1
Mesa 3-D graphics library
How can I get OpenGL 3+ to work on my system?
According to mesa at http://www.mesa3d.org/relnotes/10.0.1.html,
Mesa 10.0.1 implements the OpenGL 3.3 API, but the version reported by glGetString(GL_VERSION) or glGetIntegerv(GL_MAJOR_VERSION) / glGetIntegerv(GL_MINOR_VERSION) depends on the particular driver being used. Some drivers don't support all the features required in OpenGL 3.3. OpenGL 3.3 is only available if requested at context creation because compatibility contexts not supported.
But they don't explain the contect creation part any further! I don't see why the intel driver isn't working, since it apparently supports OpenGL 3+.
http://www.x.org/wiki/IntelGraphicsDriver/
Any help would be really appreciated! It's going to be a right pain in the ass to do my coursework on a different computer.
Last edited by 01 (2014-01-20 01:00:44)

According to Wikipedia your gpu only supports opengl 2.0 https://en.wikipedia.org/wiki/Intel_GMA#GMA_X3100

X crashes with YouTube video pages after xf86-video-intel upgrade

X crashes when trying to view a YouTube video page after the last xf86-video-intel upgrade. I think it happens with other websites as well but most of them work just fine. If I downgrade xf86-video-intel to the previous version the problem is gone.
Xorg.0.log shows:
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809d93b]
1: /usr/bin/X (0x8048000+0x5cc55) [0x80a4c55]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb77fc40c]
3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb7275000+0x3458e) [0xb72a958e]
4: /usr/bin/X (0x8048000+0xacc80) [0x80f4c80]
5: /usr/bin/X (0x8048000+0x93c97) [0x80dbc97]
6: /usr/bin/X (0x8048000+0x94b3f) [0x80dcb3f]
7: /usr/bin/X (0x8048000+0x402e7) [0x80882e7]
8: /usr/bin/X (0x8048000+0x1a685) [0x8062685]
9: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7418b86]
10: /usr/bin/X (0x8048000+0x1a271) [0x8062271]
Bus error at address 0xb5fe2000
Fatal server error:
Caught signal 7 (Bus error). Server aborting

Confirmed. Same behaviour here.
EeePC 901, xf86-video-intel 2.10.0-1.
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809d93b]
1: /usr/bin/X (0x8048000+0x5cc55) [0x80a4c55]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb771340c]
3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb71a6000+0x3458e) [0xb71da58e]
4: /usr/bin/X (0x8048000+0xacc80) [0x80f4c80]
5: /usr/bin/X (0x8048000+0x93c97) [0x80dbc97]
6: /usr/bin/X (0x8048000+0x94b3f) [0x80dcb3f]
7: /usr/bin/X (0x8048000+0x402e7) [0x80882e7]
8: /usr/bin/X (0x8048000+0x1a685) [0x8062685]
9: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7343b86]
10: /usr/bin/X (0x8048000+0x1a271) [0x8062271]
Bus error at address 0xb5a4d000
Fatal server error:
Caught signal 7 (Bus error). Server aborting
Last edited by hw-tph (2010-02-13 12:32:51)

[SOLVED] Mobility Radeon HD 5400 Series with xf86-video-ati

I have an hp laptop with the following VGA Devices:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
I installed:
xf86-video-ati 1:7.0.0-1
When I run:
Xorg -configure
I get:
[ 8983.828] (EE)
[ 8983.829] (EE) Backtrace:
[ 8983.830] (EE) 0: Xorg (xorg_backtrace+0x36) [0x58a426]
[ 8983.832] (EE) 1: Xorg (0x400000+0x18e279) [0x58e279]
[ 8983.833] (EE) 2: /usr/lib/libpthread.so.0 (0x7f5ea78c8000+0xf1e0) [0x7f5ea78d71e0]
[ 8983.834] (EE) 3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f5ea53e2000+0x41bd4) [0x7f5ea5423bd4]
[ 8983.836] (EE) 4: Xorg (DoConfigure+0xdec) [0x46b15c]
[ 8983.837] (EE) 5: Xorg (0x400000+0x7a728) [0x47a728]
[ 8983.838] (EE) 6: Xorg (0x400000+0x26786) [0x426786]
[ 8983.839] (EE) 7: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5ea654ca15]
[ 8983.841] (EE) 8: Xorg (0x400000+0x26cad) [0x426cad]
[ 8983.842] (EE)
[ 8983.843] (EE) Segmentation fault at address 0x18
[ 8983.847]
Fatal server error:
[ 8983.848] Caught signal 11 (Segmentation fault). Server aborting
What did I tried:
Using vesa instead --> gives me a flickering screen
Using intel instead --> gives me a black screen
Somebody an idea, what I can do?
Last edited by haschibaschi (2013-01-23 21:25:23)

Ok, I removed the packages
xf86-video-intel xf86-video-vesa xf86-video-fbdev
So its the xf86-video-ati, which is used.
Here is my Xorg.0.log
[ 9.006]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 9.006] X Protocol Version 11, Revision 0
[ 9.006] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 9.006] Current Operating System: Linux flaptop 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64
[ 9.006] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c40fce05-33ae-4a4d-aa51-21295185a22f ro quiet
[ 9.006] Build Date: 25 January 2013 09:33:50AM
[ 9.006]
[ 9.006] Current version of pixman: 0.28.2
[ 9.006] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.006] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.006] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26 00:26:38 2013
[ 9.109] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.220] (==) No Layout section. Using the first Screen section.
[ 9.220] (==) No screen section available. Using defaults.
[ 9.220] (**) |-->Screen "Default Screen Section" (0)
[ 9.220] (**) | |-->Monitor "<default monitor>"
[ 9.221] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.221] (==) Automatically adding devices
[ 9.221] (==) Automatically enabling devices
[ 9.221] (==) Automatically adding GPU devices
[ 9.326] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 9.326] Entry deleted from font path.
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 9.368] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 9.368] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 9.368] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.368] (II) Loader magic: 0x7fcc40
[ 9.368] (II) Module ABI versions:
[ 9.368] X.Org ANSI C Emulation: 0.4
[ 9.368] X.Org Video Driver: 13.1
[ 9.368] X.Org XInput driver : 18.0
[ 9.368] X.Org Server Extension : 7.0
[ 9.368] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 9.369] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9.371] (--) PCI:*(0:0:2:0) 8086:0046:103c:144a rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[ 9.371] (--) PCI: (0:1:0:0) 1002:68e0:103c:144a rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 9.371] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.384] Initializing built-in extension Generic Event Extension
[ 9.384] Initializing built-in extension SHAPE
[ 9.384] Initializing built-in extension MIT-SHM
[ 9.384] Initializing built-in extension XInputExtension
[ 9.384] Initializing built-in extension XTEST
[ 9.384] Initializing built-in extension BIG-REQUESTS
[ 9.384] Initializing built-in extension SYNC
[ 9.384] Initializing built-in extension XKEYBOARD
[ 9.384] Initializing built-in extension XC-MISC
[ 9.385] Initializing built-in extension SECURITY
[ 9.385] Initializing built-in extension XINERAMA
[ 9.385] Initializing built-in extension XFIXES
[ 9.385] Initializing built-in extension RENDER
[ 9.385] Initializing built-in extension RANDR
[ 9.385] Initializing built-in extension COMPOSITE
[ 9.385] Initializing built-in extension DAMAGE
[ 9.385] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.385] Initializing built-in extension DOUBLE-BUFFER
[ 9.385] Initializing built-in extension RECORD
[ 9.385] Initializing built-in extension DPMS
[ 9.385] Initializing built-in extension X-Resource
[ 9.385] Initializing built-in extension XVideo
[ 9.385] Initializing built-in extension XVideo-MotionCompensation
[ 9.385] Initializing built-in extension XFree86-VidModeExtension
[ 9.385] Initializing built-in extension XFree86-DGA
[ 9.385] Initializing built-in extension XFree86-DRI
[ 9.385] Initializing built-in extension DRI2
[ 9.385] (II) LoadModule: "glx"
[ 9.439] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 9.497] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 9.497] compiled for 6.9.0, module version = 1.0.0
[ 9.498] Loading extension GLX
[ 9.498] (==) Matched intel as autoconfigured driver 0
[ 9.498] (==) Matched ati as autoconfigured driver 1
[ 9.498] (==) Matched intel as autoconfigured driver 2
[ 9.498] (==) Matched vesa as autoconfigured driver 3
[ 9.498] (==) Matched modesetting as autoconfigured driver 4
[ 9.498] (==) Matched fbdev as autoconfigured driver 5
[ 9.498] (==) Assigned the driver to the xf86ConfigLayout
[ 9.498] (II) LoadModule: "intel"
[ 9.544] (WW) Warning, couldn't open module intel
[ 9.544] (II) UnloadModule: "intel"
[ 9.544] (II) Unloading intel
[ 9.544] (EE) Failed to load module "intel" (module does not exist, 0)
[ 9.544] (II) LoadModule: "ati"
[ 9.545] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.558] (II) Module ati: vendor="X.Org Foundation"
[ 9.558] compiled for 1.13.0, module version = 7.0.0
[ 9.558] Module class: X.Org Video Driver
[ 9.558] ABI class: X.Org Video Driver, version 13.0
[ 9.558] (II) LoadModule: "radeon"
[ 9.559] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.640] (II) Module radeon: vendor="X.Org Foundation"
[ 9.641] compiled for 1.13.0, module version = 7.0.0
[ 9.641] Module class: X.Org Video Driver
[ 9.641] ABI class: X.Org Video Driver, version 13.0
[ 9.641] (II) LoadModule: "vesa"
[ 9.641] (WW) Warning, couldn't open module vesa
[ 9.641] (II) UnloadModule: "vesa"
[ 9.641] (II) Unloading vesa
[ 9.641] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.641] (II) LoadModule: "modesetting"
[ 9.641] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.650] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.650] compiled for 1.13.1, module version = 0.6.0
[ 9.650] Module class: X.Org Video Driver
[ 9.650] ABI class: X.Org Video Driver, version 13.1
[ 9.650] (II) LoadModule: "fbdev"
[ 9.651] (WW) Warning, couldn't open module fbdev
[ 9.651] (II) UnloadModule: "fbdev"
[ 9.651] (II) Unloading fbdev
[ 9.651] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.651] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE
[ 9.655] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.655] (++) using VT number 7
[ 9.670] (II) [KMS] Kernel modesetting enabled.
[ 9.670] (II) modesetting(0): using drv /dev/dri/card0
[ 9.670] (II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.670] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 9.670] (==) modesetting(0): RGB weight 888
[ 9.670] (==) modesetting(0): Default visual is TrueColor
[ 9.670] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 9.670] (II) modesetting(0): Output LVDS-0 has no monitor section
[ 9.683] (II) modesetting(0): Output VGA-0 has no monitor section
[ 9.683] (II) modesetting(0): EDID for output LVDS-0
[ 9.683] (II) modesetting(0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 9.683] (II) modesetting(0): Year: 2009 Week: 1
[ 9.683] (II) modesetting(0): EDID Version: 1.3
[ 9.683] (II) modesetting(0): Digital Display Input
[ 9.683] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.683] (II) modesetting(0): Gamma: 2.20
[ 9.683] (II) modesetting(0): No DPMS capabilities specified
[ 9.683] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.683] (II) modesetting(0): First detailed timing is preferred mode
[ 9.683] (II) modesetting(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 9.683] (II) modesetting(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 9.683] (II) modesetting(0): Manufacturer's mask: 0
[ 9.683] (II) modesetting(0): Supported detailed timing:
[ 9.683] (II) modesetting(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 9.683] (II) modesetting(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 9.683] (II) modesetting(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 9.684] (II) modesetting(0): Unknown vendor-specific block f
[ 9.684] (II) modesetting(0): AUO
[ 9.684] (II) modesetting(0): B156XW02 V2
[ 9.684] (II) modesetting(0): EDID (in hex):
[ 9.684] (II) modesetting(0): 00ffffffffffff0006afec2200000000
[ 9.684] (II) modesetting(0): 01130103802213780ac8959e57549226
[ 9.684] (II) modesetting(0): 0f505400000001010101010101010101
[ 9.684] (II) modesetting(0): 010101010101121b5642500026302018
[ 9.684] (II) modesetting(0): 340058c1100000180000000f00000000
[ 9.684] (II) modesetting(0): 00000000000000000020000000fe0041
[ 9.684] (II) modesetting(0): 554f0a202020202020202020000000fe
[ 9.684] (II) modesetting(0): 004231353658573032205632200a00c0
[ 9.684] (II) modesetting(0): Printing probed modes for output LVDS-0
[ 9.684] (II) modesetting(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.697] (II) modesetting(0): EDID for output VGA-0
[ 9.697] (II) modesetting(0): Output LVDS-0 connected
[ 9.697] (II) modesetting(0): Output VGA-0 disconnected
[ 9.697] (II) modesetting(0): Using exact sizes for initial modes
[ 9.697] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
[ 9.697] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.697] (==) modesetting(0): DPI set to (96, 96)
[ 9.697] (II) Loading sub module "fb"
[ 9.697] (II) LoadModule: "fb"
[ 9.697] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.730] (II) Module fb: vendor="X.Org Foundation"
[ 9.730] compiled for 1.13.2, module version = 1.0.0
[ 9.730] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.730] (II) Loading sub module "shadow"
[ 9.730] (II) LoadModule: "shadow"
[ 9.730] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 9.744] (II) Module shadow: vendor="X.Org Foundation"
[ 9.744] compiled for 1.13.2, module version = 1.1.0
[ 9.744] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.744] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 9.744] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.744] (==) RADEON(G0): Default visual is TrueColor
[ 9.744] (==) RADEON(G0): RGB weight 888
[ 9.744] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 9.744] (--) RADEON(G0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[ 9.745] (II) Loading sub module "dri2"
[ 9.745] (II) LoadModule: "dri2"
[ 9.745] (II) Module "dri2" already built-in
[ 9.745] (II) Loading sub module "exa"
[ 9.745] (II) LoadModule: "exa"
[ 9.745] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.762] (II) Module exa: vendor="X.Org Foundation"
[ 9.762] compiled for 1.13.2, module version = 2.6.0
[ 9.762] ABI class: X.Org Video Driver, version 13.1
[ 9.762] (II) RADEON(G0): KMS Color Tiling: enabled
[ 9.762] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[ 9.762] (II) RADEON(G0): KMS Pageflipping: enabled
[ 9.762] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[ 9.765] (II) RADEON(G0): Output LVDS-1 has no monitor section
[ 9.767] (II) RADEON(G0): Output HDMI-0 has no monitor section
[ 9.893] (II) RADEON(G0): Output VGA-1 has no monitor section
[ 9.896] (II) RADEON(G0): EDID for output LVDS-1
[ 9.896] (II) RADEON(G0): Printing probed modes for output LVDS-1
[ 9.896] (II) RADEON(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.896] (II) RADEON(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 9.896] (II) RADEON(G0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 9.896] (II) RADEON(G0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 9.899] (II) RADEON(G0): EDID for output HDMI-0
[ 10.023] (II) RADEON(G0): EDID for output VGA-1
[ 10.023] (II) RADEON(G0): Output LVDS-1 connected
[ 10.023] (II) RADEON(G0): Output HDMI-0 disconnected
[ 10.023] (II) RADEON(G0): Output VGA-1 disconnected
[ 10.023] (II) RADEON(G0): Using exact sizes for initial modes
[ 10.023] (II) RADEON(G0): Output LVDS-1 using initial mode 1366x768
[ 10.023] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10.023] (II) RADEON(G0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10.023] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10.024] (==) RADEON(G0): DPI set to (96, 96)
[ 10.024] (II) Loading sub module "fb"
[ 10.024] (II) LoadModule: "fb"
[ 10.024] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.024] (II) Module fb: vendor="X.Org Foundation"
[ 10.024] compiled for 1.13.2, module version = 1.0.0
[ 10.024] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.024] (II) Loading sub module "ramdac"
[ 10.024] (II) LoadModule: "ramdac"
[ 10.024] (II) Module "ramdac" already built-in
[ 10.024] (==) Depth 24 pixmap format is 32 bpp
[ 10.037] (II) RADEON(G0): [DRI2] Setup complete
[ 10.037] (II) RADEON(G0): [DRI2] DRI driver: r600
[ 10.037] (II) RADEON(G0): [DRI2] VDPAU driver: r600
[ 10.037] (II) RADEON(G0): Front buffer size: 4128K
[ 10.037] (II) RADEON(G0): VRAM usage limit set to 228182K
[ 10.048] (==) RADEON(G0): Backing store disabled
[ 10.048] (II) RADEON(G0): Direct rendering enabled
[ 10.048] (II) RADEON(G0): Setting EXA maxPitchBytes
[ 10.048] (II) EXA(256): Driver allocated offscreen pixmaps
[ 10.048] (II) EXA(256): Driver registered support for the following operations:
[ 10.048] (II) Solid
[ 10.048] (II) Copy
[ 10.048] (II) Composite (RENDER acceleration)
[ 10.048] (II) UploadToScreen
[ 10.048] (II) DownloadFromScreen
[ 10.048] (II) RADEON(G0): Acceleration enabled
[ 10.048] (==) RADEON(G0): DPMS enabled
[ 10.048] (==) RADEON(G0): Silken mouse enabled
[ 10.049] (II) RADEON(G0): Set up textured video
[ 10.049] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
[ 10.049] (II) RADEON(G0): [XvMC] Extension initialized.
[ 10.049] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): Backing store disabled
[ 10.056] (==) modesetting(0): Silken mouse enabled
[ 10.056] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): DPMS enabled
[ 10.080] (--) RandR disabled
[ 10.100] (EE) GLX error: Can not get required symbols.
[ 10.100] (II) modesetting(0): Damage tracking initialized
[ 10.100] (II) modesetting(0): Setting screen physical size to 361 x 203
[ 10.428] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.428] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.428] (II) LoadModule: "evdev"
[ 10.429] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.498] (II) Module evdev: vendor="X.Org Foundation"
[ 10.498] compiled for 1.13.0, module version = 2.7.3
[ 10.498] Module class: X.Org XInput Driver
[ 10.498] ABI class: X.Org XInput driver, version 18.0
[ 10.498] (II) Using input driver 'evdev' for 'Power Button'
[ 10.498] (**) Power Button: always reports core events
[ 10.498] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10.498] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.498] (--) evdev: Power Button: Found keys
[ 10.498] (II) evdev: Power Button: Configuring as keyboard
[ 10.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.498] (**) Option "xkb_rules" "evdev"
[ 10.498] (**) Option "xkb_model" "evdev"
[ 10.498] (**) Option "xkb_layout" "ch"
[ 10.498] (**) Option "xkb_variant" "de"
[ 10.547] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 10.547] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.547] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event14"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.548] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 10.548] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.548] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input15/event15"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.549] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.549] (II) Using input driver 'evdev' for 'Power Button'
[ 10.549] (**) Power Button: always reports core events
[ 10.549] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.549] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.549] (--) evdev: Power Button: Found keys
[ 10.549] (II) evdev: Power Button: Configuring as keyboard
[ 10.549] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 10.549] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10.549] (**) Option "xkb_rules" "evdev"
[ 10.549] (**) Option "xkb_model" "evdev"
[ 10.549] (**) Option "xkb_layout" "ch"
[ 10.549] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10.549] (II) No input driver specified, ignoring this device.
[ 10.549] (II) This device may have been added with another device file.
[ 10.549] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10.550] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.550] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.550] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event12)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.552] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/event9)
[ 10.552] (**) Acrox USB & PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 10.552] (II) Using input driver 'evdev' for 'Acrox USB & PS/2 Mouse'
[ 10.552] (**) Acrox USB & PS/2 Mouse: always reports core events
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: Device: "/dev/input/event9"
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Vendor 0xf62 Product 0x1001
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found 9 mouse buttons
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found scroll wheel(s)
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found relative axes
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found x and y relative axes
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Configuring as mouse
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Adding scrollwheel support
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9/event9"
[ 10.553] (II) XINPUT: Adding extended input device "Acrox USB & PS/2 Mouse" (type: MOUSE, id 10)
[ 10.553] (II) evdev: Acrox USB & PS/2 Mouse: initialized for relative axes.
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration profile 0
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration factor: 2.000
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration threshold: 4
[ 10.554] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/mouse1)
[ 10.554] (II) No input driver specified, ignoring this device.
[ 10.554] (II) This device may have been added with another device file.
[ 10.554] (II) config/udev: Adding input device 2SF022 (/dev/input/event8)
[ 10.554] (**) 2SF022: Applying InputClass "evdev keyboard catchall"
[ 10.554] (II) Using input driver 'evdev' for '2SF022'
[ 10.554] (**) 2SF022: always reports core events
[ 10.554] (**) evdev: 2SF022: Device: "/dev/input/event8"
[ 10.554] (--) evdev: 2SF022: Vendor 0xbda Product 0x5801
[ 10.554] (--) evdev: 2SF022: Found keys
[ 10.555] (II) evdev: 2SF022: Configuring as keyboard
[ 10.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"
[ 10.555] (II) XINPUT: Adding extended input device "2SF022" (type: KEYBOARD, id 11)
[ 10.555] (**) Option "xkb_rules" "evdev"
[ 10.555] (**) Option "xkb_model" "evdev"
[ 10.555] (**) Option "xkb_layout" "ch"
[ 10.555] (**) Option "xkb_variant" "de"
[ 10.556] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.556] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.556] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.556] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.556] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.556] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.556] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.556] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 10.556] (**) Option "xkb_rules" "evdev"
[ 10.556] (**) Option "xkb_model" "evdev"
[ 10.556] (**) Option "xkb_layout" "ch"
[ 10.556] (**) Option "xkb_variant" "de"
[ 10.557] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 10.557] (II) LoadModule: "synaptics"
[ 10.557] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10.705] (II) Module synaptics: vendor="X.Org Foundation"
[ 10.705] compiled for 1.13.1, module version = 1.6.2
[ 10.705] Module class: X.Org XInput Driver
[ 10.705] ABI class: X.Org XInput driver, version 18.0
[ 10.705] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 10.705] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.705] (**) Option "Device" "/dev/input/event7"
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10.720] (**) Option "TapButton1" "1"
[ 10.720] (**) Option "TapButton2" "2"
[ 10.720] (**) Option "TapButton3" "3"
[ 10.720] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.720] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.726] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 10.727] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.727] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.728] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10.728] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.728] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 10.728] (II) No input driver specified, ignoring this device.
[ 10.728] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.730] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[ 10.730] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10.731] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 10.731] (**) HP WMI hotkeys: always reports core events
[ 10.731] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[ 10.731] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 10.731] (--) evdev: HP WMI hotkeys: Found keys
[ 10.731] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 10.731] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 10.731] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 10.731] (**) Option "xkb_rules" "evdev"
[ 10.731] (**) Option "xkb_model" "evdev"
[ 10.731] (**) Option "xkb_layout" "ch"
[ 10.731] (**) Option "xkb_variant" "de"
Between why I installed the mentioned packages was, cause I'v seen these log entries in the Xorg.0.log:
(EE) Failed to load module "xxxx" (module does not exist, 0)
Can somebody explain what happens here.

No TrueColour with xf86-video-intel

Similar Messages

Maybe you are looking for