No TV Shows Folder

I changed all of my videos that were tv shows to TV shows by right clicking it in itunes and going from movie to TV show everythings good my ipods ver. 1.1 which is up to date, i put the newly updated TV shows into the ipod disconnect when its done and check my ipod for the new TV shows by going into Videos, and the the folder TV shows isnt in there, none of the Tv SHows i just added are in any of the ipod -> Video folders but they are on the ipod help plz

i put the newly updated TV shows into the ipod disconnect when its done and check my ipod for the new TV shows by going into Videos, and the the folder TV shows isnt in there
You must have at least one valid path to a "TV Show" file for the "TV Shows Folder" to be visible. One way is to download a correctly tagged ITMS TV show and the other is to add all of the missing "nodes" which iTunes currently does not allow you to do. So you currently need some sort of meta-data modifier utility to add this missing data. Unfortunately, Windows applications (like Atomic Parsley) still tend to be command line oriented while most users would prefer a GUI based version.

Similar Messages

I would like to move the Tv show folder to an external HD. Can I do this without moving the entire iTunes music folder?

I would like to move the TV Shows folder from my iMac's HD to an external HD to free up some space. Can I do this without moving the entire iTunes Library folder? If so, can my other devices like iPads and Apple TV find the moved TV shows folder?

All kinds of things are possible with iTunes, but few of them are easy. Yes, you can isolate TV shows on a different drive. The degree of complexity depends upon how much work and learning you are interested in doing. The easiest solution is to delete them all from iTunes but do not let iTunes delete the actual media files. Then go to the folder where TV shows are located and copy that folder to a different drive. Now hold down the option key and drag them back to iTunes so it adds them again. Using the option key means the file doesn't get copied to iTunes' main media folder. However, since these are being added as new files it means you risk losing some information entered about them such as personal ratings, date added, date last played, etc. There are ways of retaining this data but that's where you really have to learn how to do workarounds with iTunes.
I have never seen an AppleTV, nor used an iPhone but my understanding is these devices do not directly use the files, they do so through iTunes. As long as the entries can be found in iTunes then they should be accessible by other devices.

How do I add files to my TV shows folder on iTunes?

I really need help, I have been at it for hours but I cannot find a way to add files to the TV shows folder. I have gone to the far corners of the internet without ANY working progress! Please help I'm wanting to put a show into the TV shows folder but I am unable.

Is the file is already in iTunes. If so: Right click on the File/Get Info/Options/Media Kind: Set to TV Show

Hierarchical Viewer not showing Folder Label for Accessors

Hi,
I am using JDev 11.1.1.5.
I am using Hierarchical Viewer component to show master detail relationships. My tree structure is as follows:
Locations (Level 1)
----->Departments (Level 2)
----------->Employees (Level 3)
----------->Rooms (Level 3)
Employees and Rooms are the accessors of Departments (they are same level). For these accessors, I already set the Folder Labels in Tree Binding. So, in the Hierarchical Viewer, under Departments Node, there are 2 nodes to group for Employees and Rooms. But these 2 nodes are empty. They should show the Folder Labels that I defined in the tree binding.
I tested with the ADF Tree component. It is showing folder labels correctly.
How do I customize (to show the labels) these nodes? Could you please help me with this issue? Thanks.
Best Regards,
cmoster

Hi All,
I achieved with the following code changes in jsff page. I put this code inside the Departments Node.
<af:outputText value="*#{node=='EMPLOYEES' ? node:''}*" inlineStyle="font-family:tahoma;font-size:14px;color:blue;font-weight:bold;" id="ot8"/>
<af:outputText value="*#{node=='ROOMS' ? node:''}*" inlineStyle="font-family:tahoma;font-size:14px;color:green;font-weight:bold;" id="ot82"/>
The folder labels in the tree binding are "EMPLOYEES" (for Employees Accessor) and "ROOMS" (for Rooms Accessor). After that, these 2 nodes are showing EMPLOYEES and ROOMS respectively.
Please suggest me if it can be done with the other ways.
Best Regards,
cmoster

How can I delete folder in Messages - Show Folder

Hi.
I have BB9900. When I will go to Messages->Show Folder – then I see Folders And there is some e-mail adress, inbox etc. many of them. There is also one e-mail address which is not used for me now – it’s used in past. I would like to delete that folder. How can I do that?
Thank you in advance.

Double posting does not get a quicker response, it just upsets people and takes up more space.
Here's your answer:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/How-can-I-delet-efolder-in-Messages-gt-Show-F...
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

I have macbook mid 2009, with os leopard and I updated it till yosemite now while deleting partition I erased the main hitachi drive , now I have no backups and while switching on it shows folder with question mark,inserting the grey dvd it keep spin

Have macbook mid 2009, with leopard, updated to yosemite, while erasing partition erased hd, dot have backups, powerup shows folder with question mark, inserting grey dvd shows apple and spinning wheel, please help

Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can upgrade to Yosemite by re-downloading it from the Purchases page in the App Store.

New iPod showing Folder with exclamation point

I have successfully downloaded music because it shows on iTunes but everytime I go to turn it on it shows the Apple icon and then says www.apple.com/support/ipod with a folder and an exclamation point. I've visited and tried it all and it won't do anything else.
Can someone help?

I have successfully downloaded music because it shows on iTunes but everytime I go to turn it on it shows the Apple icon and then says www.apple.com/support/ipod with a folder and an exclamation point. I've visited and tried it all and it won't do anything else.
Can someone help?

Ipod nano shows folder with exclamation point. followed instructions....

....on the apple support but my Ipod wont work. I just got new speakers for it too.
It was working fine. But then I plugged it into my computer and it wouldnt charge. and then I disconnected it and It shows me the folder with the exclamation mark. telling me to go to support.
I tried the hold down the menu button and the select button. but it just showed the folder again.
Pleaaase please please help me.

Hi Alex in wonderland,
This post by Mitch, another member on the Discussions here, about the and folder on an iPod might help with your situation:
Mitch: Exclamation point and folder and nothing else
-Kylene

Ipod shows folder with exclamation point and computer won't recognize

My ipod resets itself each time that I try to turn it on, and then flashes the folder with the exclamation point. I have tried to restore it and update software but the computer won't recognize it. A few days before it broke the ipod would skip through some songs that it was unable to play for some reason, and now it makes a clicking sound when trying to start up. Did it die, or is there a way to fix this?

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

Ipod showed folder with question mark inside

Hello,
my ipod has lately shown a folder with a question mark inside of it when it was started (immediately after the apple symbol).
Now it shows me, after the apple symbol disappears, a line (from one end of the screen to the other).
I have an ipod which was introduced in 2003. It has 4 buttons below the screen and below that a wheel. It´s a 20GB.
I would really appreciate it, if some could help me out and give me some advice.

Hi Mariondsummer,
Have you checked the suggestions in these Knowledge Base articles?:
iPod displays a folder icon with an exclamation point
iPod displays a sad iPod icon
Also, this post by Mitch, another user here on Apple Discussions, might be worth checking out. It contains a lot of things to try if you get an exclamation point and folder (or a sad iPod icon) on your iPod's screen:
Mitch 751: Exclamation point and folder and nothing else
Any success?
-Kylene

Layout Set : Show Folder Content

How can i show the contents of folder in main page if i use AdminExplorer or ConsumerTreeList layout set.
What i am looking is to display the content in the main page rather than clicking on folder link which takes to next page with contents.
For e.g
Folder A                  Size   Modified Modifiedby
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
Folder B
    Document1              30KB 1-mar-06 user1
    Document2              30KB 1-mar-06 user1
I appreciate any suggestions or ideas.
Thanks
Tegala

Hi,
Prakash Singh has provided a ready to use code to have KM repository custom views. you can make modificationd to meet your requirement.
refer:
Build Your Own KM Navigation iView Using HTMLB Tree
Hope that helps.
Regards,
S.Divakar

Sort dimension attributes then show folder

I have an dimension as below where i have created an folder for Spanish fields and rest attributes are non foldered.
i want to sort the dimension attributes then show the folder attributes.
ie:
Customer
Customer Key
Education
Gender
Material Status
Spanish Fields
ShanmugaRaj

Hi Shanmuga,
Generally, all the folders will display on the above of dimension attributes, all the folders and attributes are listed in alphabetical order, we can sort one property members' sequence, but there is no build-in feature to sort all properties' sequence,
if you want to sort the properties at your will, you have to add some prefix to property's name using the letter. However, you want to display attributes first and then folders, right? I am afraid this requirement cannot be achieved.
However here I still would recommend you to submit a feedback to Microsoft Connect at this link at this link
https://connect.microsoft.com/SQLServer/Feedback This connect site is a connection point between you and Microsoft. Your feedback enables Microsoft to make software and services the best that they
can be, Microsoft might consider adding this feature in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support,
please click here.
Charlie Liao
TechNet Community Support

Show folder navigation when using Save As

I'm working on a video project that involves resizing photos of varrying size to a standard video resolution. I've created a new document with one of the preset video file sizes and I'm dragging and dropping files from their folder into the open document, resizing them, making color adjustments and then saving the .psd file back into the folder they belong. The issue is that I have over 50 directories and when I do a Save As I have to back out of the last directory used and scroll down the list to get to the correct directory to save the image in the correct folder.
Is there a way to show the same folder navigation panel in Photoshop that you see in a standard explorer window? This would allow me to switch directories with one click instead of having to back out, scroll down and then select the next folder.
I'm using Windows as my OS.

No, PS only uses the simplified file dialogs. There is no way to change that.
Mylenium

IPod starts up, shows folder icon then stops

when i connect to itunes, the ipod shows "do not disconnect", but is not recognised by itunes and never gets beyond the "do not disconnect" symbol on the ipod. The remote device is shown on explorer drive mapping - but you cannot access the device.
when disconnected from the computed, i restart, get the apple symbol then the folder/excalm symbol and the ipod closes down. can hear the processor working, there is a bit of a click as it tries to do its job.
would like to wipe the drive and restart, but need the ipod to be recognised by itunes first. any advice?

You need to re-format the hard drive on the iPod. Not knowing which generation it is, I'll assume you're using USB. The procudure goes like this: first un-install both iTunes and any updater software you may have. Download the latest updater and run it first. Hopefully, the computer will recognize the iPod and you can proceed to re-format the iPod using the updater. Once that is done, disconnect the iPod. Now,install iTunes. Re-connect the iPod and iTunes will give the option of either synching automatically at that moment or not synching at all.

IPod Nano Stays At Apple Screen, Then Shows Folder Sign

Hi, my brother has an iPod nano (2nd generation), and it has the problem that is stated above. It would turn on, show the apple sign, and then show the folder icon, then the address for apple support. We followed some of the directions that were shown on the page, such as resetting and then restoring, and no luck. We went to another PC and tried restoring it, and no luck either.
So I was wondering, what other solutions are there?
iPod Nano Windows XP

The same thing happened to my 20GB iPod and I tried everything that Apple troubleshoots told me to do but the only thing that would ever make it work was to slam it really hard with my hand. The only reason I could think that this method would work was that a part of the hard-drive had come loose. I tried to get a new iPod through the warranty but Apple wouldn't give me one, so instead, me and my father took apart my iPod and it turned out that the hard-drive was the problem. I hope you find someway to make the iPod to work but when the same problem happened to me, there was no way to fix it.

No TV Shows Folder

Similar Messages

Maybe you are looking for