No TV (xawtv) after Xfree86 upgrade (fixed?)

Upgraded to new xfree-4.4.0-1.
Now I can't fire up my TV card using xawtv
Terminal output is:
This is xawtv-3.91, running on Linux/i686 (2.6.3-P4v.2)
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 144 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 268
Current serial number in output stream: 268
I think it has something to do with {maybe??} the ttf-bitstream-vera font thingy :?: :?:
Any help is much appreciated
Thanks,
slyski
I think I fixed it.
I was reluctant to upgrade to the 2.6.5 kernel after the 2.6.4 usb hotplug errors.
But I went ahead anyway and the hotplug errors aren't there and the TV (xawtv) works OK now.
GO FIGURE
slyski

Thanks for the reply Xentac,
Since it started working again after the 2.6.5 upgrade I didn't check the command
line thing anymore.
Since I seen another post about this I investigated again and the error about the font
is still there:
This is xawtv-3.91, running on Linux/i686 (2.6.5-P4v.1)
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
but at least it works now.
Thanks,
slyski

Similar Messages

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

The mail app on my Mac laptop will not open. This began happening after an upgrade during which "Security UPdate 2012-004" was installed. My mail app has a new icon, and I think i trashed the old program (trying to follow directions). Suggest a fix?

The mail app on my Mac laptop will not open. This began happening after an upgrade during which "Security UPdate 2012-004" was installed. My mail app has a new icon, and I think i trashed the old program (trying to follow directions). Suggest a fix?

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0

I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light

I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light.
I cant even get into itunes because it wont recognize it to do a reboot or a rollback.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

My personal hotspot disappeared after I upgraded my iphone 4s to iOS 8, how do I fix this?

After upgrading my iPhone 4s to iOS 8.0 the Personal Hotspot disappeared even after I upgraded again to iOS 8.0.2 its still not there. How do I fix this.

Hello there, george.
The following Knowledge Base article offers up some great steps for troubleshooting Personal Hotspot:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Ipad1 is extremely, painfully slow after ios5 upgrade. Is there a fix?

Is there any fix for the awfully slow performance of iPad1 after ios5 upgrade? Mine is sometimes so slow it's impossible to use. Thanks

Mine is slower, but it's still useable. There is a update for battery draining due in a few weeks, though I don't know whether it will contain other fixes as well : http://www.bbc.co.uk/news/technology-15570462
You could try closing all apps completely and then do a reset and see if that helps. To close all apps : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I've also seen a couple of posts recommending turning off iCloud (which I haven't tried yet).

After IOS6 upgrade game centre says my nick name already in use. has reset some games back to beginning, how do i fix

After IOS6 upgrade game centre says my nick name already in use. has reset some games back to beginning, how do i fix

I've had almost every issue you've had. Finally on Friday the screen blacked out. It was obviously still charged, since I could hear the message ring, but when I tried to light up the display it didn't light so I was unable to get to it unless I removed the battery. Then, as soon as the display timed out, I couldn't get it lit up again without removing battery. I had the same slow movements throughout the display as well as slow text messaging. Every issue you had other than the alarm clock (that always worked well).
I took it in yesterday and, after over an hour spent there with a 'professional', I still had no answers. He told me to come home and copy everything from my sd card to my computer, then re-format my card. Well, my phone didn't even recognize that I had an sd card installed!! Nor did my computer!
So then I got to experimenting...I removed the card and viola!!!!!! The phone worked GREAT! It's never worked so fast! I then installed my husbands sd card to see if it was my phone's card reader or my card. Turns out that the phone still worked great with his card installed and it did recognize his card in my phone. So, my conclusion is that I need a new card. I couldn't believe the difference in speed of everything! It's like a brand new phone!
As for the hard reset...I did that over the weekend, before I could get to a verizon store. It didn't work at all.
I'd say, do the same thing I did and see if that works. Can't hurt!!! Please keep me posted. I'd like to see what you find out
Good Luck!!!!

After I upgrade lion to Mavericks, App Store stopped working, any idea how to fix this?

After I upgraded OS lion to Mavericks, in app store I had some new updates, then after a system update, which require restart, then App Store, stopped working, any one can tell me what should I do to fix this problem?

Guys just contact apple support team . They will guide you well and your problem will most probably be resolved. I contacted them and following their instructions my mac is working totally fine again. If at all the problem persist the re-install mavericks by following steps
1). Switch of mac
2). Hold option/alt key and then switch it on.
3). Then choose your language and continue.
4). Now Re-Install OS X .
5). It will start downloading and installing.
6). Leave it idle for the required amount of time.
7). It will restart automatically and your problem will be definitely resolved.
Note:
a. If there is any problem of connection follow the same steps and the downloading will start where it stopped.

I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

see if this article helps: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

My ipad 3 times out all the time after I upgraded to iOS 7. How do I fix it?

My ipad 3 times out all the time after I upgraded to iOS 7. How do I fix it?

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Mac OS X 10.5: Unable to log in after an upgrade install fix does not work?

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

How do I fix aLaCie Backup Drive that runs constantly after Maverick upgrade

LaCie backup drive for time machine runs constaantly after Maverick upgrade. This is using resources and slows the processor

After installing Mavericks on my one year old iMac (loaded) Time Machine failed (Pegasus Promise Thunderbolt 3TB). I tried unmounting it, didn't work. Rebooted: Time Machine failed again [Time Machine couldn’t complete the backup to “Time Machine”. Unable to complete backup. An error occurred while creating the backup folder.] was the only message. Had to reboot to get Pegusus accessible again. Tried re-intalling Maverick (old Microsoft thing... reintall the OS). Didin't do anything for Time Machine, same failure. Booted into safe mode: nothing, same probelm. Repaired permissions: no joy there either. So, now have no Time Machine backups at all. And Time Machine won't work with the Pegasus. [same error message after 30 min or so every time]. ordinary file saves work fine though.
Ideas please?

Spotlight Indexing, Systemstats, Missing File, All After Mavericks Upgrade

Dear Mac Support Communities,
The upgrade to OS X 10.9.4 has crippled my computer.
My main question is: should I reformat, or should I wait for a patch to come out to solve whatever is wrong with Mavericks? I explain below.
Spotlight is constantly indexing. The mdworker is all over the place on the Activity Monitor—4% and then it explodes to 85% of CPU usage. Systemstats kicks in randomly (connected to spotlight perhaps?) and eats up 90% of my CPU and 3gigs of RAM. Time Machine takes AGES to backup.
I have not been able to stop Spotlight's endless indexing. I have moved my hard drive and my Time Machine backup into the 'private' filter in 'Spotlight Preferences.' I have also tried the "sudo mdutil -a -i off" trick to stop indexing altogether. But Spotlight Indexing goes "off" and then automatically turns "on" in Terminal. Spotlight carries on, and the computer performance is choppy.
I've run disk repair. First, I repaired permissions. Then I verified and attempted to repair the the hard drive. There is a missing file apparently, and I therefore must reformat. This is very first issue I've ever had with the hard drive since I bought the computer. Considering how awful Mavericks has been—I have been reading other Support Communities posts—I'm nervous about something going wrong, or that all these problems will persist after the reformat.
All of this has occurred three days after my upgrade to to OS X 10.9.4. I have heard of numerous people having problems with Mavericks. All similar problems concerning missing files, haywire spotlight, systemstats devouring any remaining CPU power and memory space, and slow Time Machine back-ups.
Anyone with the same problems? Care to theorize some solutions?
I have a late 2008, 15inch MacBook Pro., 2.53 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, running OS X 10.9.4 (13E28).
Cheers! I appreciate the help.

Older Macs have more troubles under Mavericks. Considering the age of your Mac, it's not uncommon to start have hardware issues like drive failure.
To repair the drive you must boot from the Recovery Drive.
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.***
Next Reset Home Directory Permissions and ACLs following directions here This will serve two purposes. It will reset YOUR permissions. Not the same as Disk Utility reset permissions and it will cause Spotlight to re-index your drive when restarting.
Restart
Download and run the combo updater to refresh your OS X files.
OS X Mavericks 10.9.4 Update (Combo)
http://support.apple.com/kb/DL1755
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.
***If Disk Utility is unable to repair you will have to copy your data to an external drive first. Reformatting will erase the drive. You should have a backup regardless, if your data is important to you. Just like a seat belt and an air bag protect you in different ways when driving, you need both Time Machine and a clone for full protection. If you don't have an external drive for backup, I can give you some suggestions to get you started.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

No TV (xawtv) after Xfree86 upgrade (fixed?)

Similar Messages

Maybe you are looking for