No type in print box

there is no type in the print dialog box when i try to print a document out of reader 10.1.2

Hello Stargeezer63, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

HI, I have a Canon Pixma MG5250 printer and it doesn't seem to recognize iPhoto. All my photos are in iPhoto but I can't access them when the printer's 'photo print' box comes up. Any suggestions? thanks

Hi,
I have a Mac OS X version 10.5.8
I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
All other aspects of the printer such as scanning and printing documents are working. When I open the printer's
'photo print' box on my Mac, it cannot access iPhoto.
I would really appreciate any feedback and suggestions as to what to do.
thanks.

If you want to print a photo that's in your library you should do so from iPhoto. Select the photo, crop to the size you want to print and type Command+P to start the print process. In the Print window select the paper size and print size, printer and then click on the Print button.
OT

How to change the paper type in printer settings?

Does anyone know how to change the paper type in printer settings? I'm trying to have the ability to change it to photo paper from Photoshop Elements. I can't find the option in printer settings or through Elements. I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
thanks!

It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

Printing boxes in scripts

Hi all,
For printing boxes in sap scripts we have a command ie. POSITION WINDOW,BOX FRAME HEIGHT WIDTH XPOS YPOS XORIGIN YORIGIN like this we have.Here my question is can any one explain me about this syntax means what exactly this syntax and how it will draw a box?
Thanks & Regards.
Laxman.P
B'lore.

Hai Laxman,
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Regards,
Ajith V

HP LASERJET 2200d - Optional TRAY 3 is grayed out in the print box - 10.2.8

I just added the optional 3rd tray to the bottom of my LASERJET 2200d. I did a print test directly from the printer and it printed a copy from that tray without a problem. But when I try to print from an application, tray 3 cannot be selected in the print box and is grayed out. Anyone?

Have you gone into Printer Center/Printer Setup Utility, click on your printer and click on the Utility button? Sometimes that has extra features that you can turn on. Maybe you need to tell the software side that the tray has been added to the printer.

Output type to print pending schedule lines only

Hi,
Is there a standard Output type to print only pending schedule lines thru ME9E, with the respective delivery date, schedule Qty, delivered Qty and pending Qty,
Please revert.
Thanks & Regds,
Ritesh

Check this link:
output type is used for sending / printing "schedule lines" against sch agr
Re: Email output of PO
Edited by: Afshad Irani on Aug 30, 2010 12:26 PM

Trying to print in iPhoto. Tells me no theme is installed but no print box comes up

Trying to print in iPhoto. Tells me no theme is installed but no print box comes up. Able to print from preview so it is not my printer

Thanks for the suggestion Larry. This discussion is for iPhoto 7, and says to do a custom install using the system disk that came with my computer. Since I recently installed iPhoto 11 from iLife, should instead reinstall from the iLife disk, rather than the system disk that came with my computer?
Yes
Also, I just want to make sure that in deleting all the files listed in this discussion, that I won't be deleting my photos. Thanks!
You will not be deleting any photos or data about them - they are in your iPhoto library and you should not be going into it -- ever
LN

Message type to print in MIRO

Hello guys,
my problem is this:
I must parametrize the output message in MIRO to print the invoice but when I run MIRO and I select from menu the voice 'Go to'> 'Message'>'Header and I insert the output type(message,for example MLPP) the system gives me message n°V0104..?What is it means'because my problem is to set my output type as a default like for example in Purchase Order in which I can insert several output type(message) as a default.For example NEU or others...
I have already parametrized the message determination for Logistic invoice but I can't associate these message type of print as a default in my Logistic Invoices-->must I execute this association in SPRO or in other ways?
Thanks in advance,I promise 10 points for a fast resolutive answer.
Bye
Maximilian

Dear Dheeraj,
I have already maintained the required condition record in NACR/NACE for my output type under invoice verification:I have always the error message V0104...What do tou think?
Thanks,bye
Maximilian

How to 'Exit' OO ALV screen type 'Model Dialog Box' using 'X' on the top?

HI Experts,
I have the below issue in my OO ALV screen type 'Model Dialog Box'...
The main screen is OO ALV and displays rows of data,
When select a line(row) and push any buttons
( u201CAdd Materialu201D, u201CAdd Binu201D, u201CModify Binu201D, u201CMove Materialu201D, u201CDisplay Batchesu201D)
the program will take you to next screen and it is a u201CModal dialog boxu201D type.
That screen has two buttons to exit ( u201CSAVEu201D and u201CCancelu201D ) on the bottom of the screen.
User would like to exit the screen using u201CXu201D on the top line right corner.
That u201CXu201D is not on for the u201CModal dialog boxu201D type screen.
How do I add event to close that screen using u201CXu201D?
Thanks in advance,
John.

data :GR_EVENT_HANDLER    TYPE REF TO LCL_EVENT_HANDLER,
       GR_DIALOG_CONTAINER TYPE REF TO CL_GUI_DIALOGBOX_CONTAINER,
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
    METHODS :
    HANDLE_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
    IMPORTING E_UCOMM,
    HANDLE_ON_DIALOGBOX_CLOSE FOR EVENT CLOSE OF CL_GUI_DIALOGBOX_CONTAINER
    IMPORTING SENDER,
ENDCLASS.                    "lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD HANDLE_USER_COMMAND.
CASE E_UCOMM.
     WHEN 'DBCON'.
        PERFORM DIALOG_DISPLAY.
ENDCASE.
ENDMETHOD.                    "HANDLE_USER_COMMAND
METHOD HANDLE_ON_DIALOGBOX_CLOSE.
    IF NOT SENDER IS INITIAL.
      CALL METHOD SENDER->FREE
        EXCEPTIONS
          OTHERS = 1.
      FREE GR_DIALOG_CONTAINER.
      CLEAR GR_DIALOG_CONTAINER.
    ENDIF.
ENDMETHOD.                    "handle_on_dialogbox_close
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
FORM DIALOG_DISPLAY .
DATA : L_TEXT(255),
              L_LIN TYPE I.
IF GR_DIALOG_CONTAINER IS INITIAL.
    CREATE OBJECT GR_DIALOG_CONTAINER
      EXPORTING
      PARENT                      =
        WIDTH                       = 400
        HEIGHT                      = 150
        STYLE                       = CL_GUI_CONTROL=>WS_SYSMENU
      REPID                       =
      dynnr                       = '100'
      LIFETIME                    = lifetime_default
        TOP                         = 100
        LEFT                        = 350
        CAPTION                     = 'Error Dialog Box'
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        EVENT_ALREADY_REGISTERED    = 6
        ERROR_REGIST_EVENT          = 7
        OTHERS                      = 8.
ENDIF.
SET HANDLER GR_EVENT_HANDLER->HANDLE_ON_DIALOGBOX_CLOSE FOR GR_DIALOG_CONTAINER.
REFRESH IG_INDEX_ROWS.
CLEAR   WG_SELECTED_ROW.
CALL METHOD GR_ALVGRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = IG_INDEX_ROWS.
DESCRIBE TABLE IG_INDEX_ROWS LINES L_LIN.
IF L_LIN GT 0.
    READ TABLE IG_INDEX_ROWS INTO WG_SELECTED_ROW INDEX 1.
    READ TABLE IG_SAL INTO WG_SAL INDEX WG_SELECTED_ROW-INDEX.
    CONCATENATE 'Item' WG_SAL-POSNR 'of Sales Order' WG_SAL-VBELN 'has been selected' INTO L_TEXT
              SEPARATED BY SPACE.
ELSE.
    L_TEXT = 'Enter Netvalue greater than 500'.
ENDIF.
CALL METHOD GR_HTMLD->ADD_GAP
    EXPORTING
      WIDTH = 1.
CALL METHOD GR_HTMLD->ADD_TEXT
    EXPORTING
      TEXT = L_TEXT.
CALL METHOD GR_HTMLD->NEW_LINE.
Display the data
CALL METHOD GR_HTMLD->DISPLAY_DOCUMENT
    EXPORTING
      PARENT = GR_DIALOG_CONTAINER.
ENDFORM.                    " DIALOG_DISPLAY

Using Acrobat 9 and suddenly there is no selected page range in the print box. Only selected PDF files or all PDF files. Am I doing something wrong? I need to print only three pages from the document

There is no selected print page range in the print box. Only selected PDF file and all PDF files. Any suggestions?

Well, I looked for where to delete this but didn't see it.
NEVERMIND; I forced iPhoto to quit and restarted and everything seems fine.
BTW, I did get one thing wrong. When I looked at both iPhoto libraries with FINDER, the active one and the archived one both showed content as far as file size goes.
It was because I was viewing the files through Adobe Bridge that it was showing 0 GB's; for whatever reason.

Creating Format type for printing ALV output.

Dear Friends,
I am using a format type for printing ALV output print which displays 65 rows and 255 columns on DINA4 page. I want to create a format type which will print 65 rows and 310 columns on 'LEGAL' page format .
So plz suggest the ways along with help links if any.
Regards,
Madan.

Hi Mandan,
As long as I know the maximum column for printing is 255.
Might be you can split your output into 2 rows...
Regards,

Cannot print, print box is too big.

Adobe Reader, HP printer

The OK button is well below the screen. The print box needs to be smaller, but you can't drag it smaller.

Is it possible to assign 2 out put type for printing Exc Invoice thru J1IS

We want to assign 2 separtae pre printed stationary for printing excise invoice printed trhough J1IS
one is alredy assigned to out put type ZEXC, is there a away to assign one more out put type to printing through J1IS.

We want to assign 2 separtae pre printed stationary for printing excise invoice printed trhough J1IS
one is alredy assigned to out put type ZEXC, is there a away to assign one more out put type to printing through J1IS.

BackgroundColor is only supported by type 'mx.containers.Box' with the theme 'halo, spark'

Hello:
I just upgrade from Flash Builder Burrito to 4.5. After importing my Burrito project into 4.5, I got like 30 errors saying the following:
The style 'backgroundColor' is only supported by type 'mx.containers.Box' with the theme(s) 'halo, spark'.
I have been using backgroundColor through the project to set colors ... Is there a new property name? Do I have to start using CSS?
The only option I had for theme was "Mobile Theme".
I would like to be able to use backgroundColor with out rewritting all that code. Is there a way?
Thanks
Paul

I used to have the prerelease "burrito" which I coded all the background colors using the "backgroundColor" property. I just bought the release version from the store and after I unstalled it I started getting the compiler errors releated to "backgroundColor".
Where do I locate the "use flex 3 compatability" box?

No type in print box

Similar Messages

Maybe you are looking for