"no un-bridged adapter" - and yes, I know this has been asked many times before :)

OK, so I installed vmware workstation 10 on windows 8.1 update. I got the above error. "No problem" I thought, and followed the community and googled advice, I:
1) uninstalled vmware
2) disabled my antivirus (Kaspersky)
3) ran the installer "As administrator" (I'm a member of the local administrators group, so hopefully anything else that doesn't require elevated permissions would be OK)
Result: Virtual Network Editor does not show VMnet0, but I see it in C:\ProgramData\VMware\netmap.conf
#This file is automatically generated.
# Hand-editing this file is not recommended.
network0.name = "HostOnly"
network0.device = "vmnet1"
network1.name = "NAT"
network1.device = "vmnet8"
network2.name = "VMNet0"
network2.device = "vmnet0"
Looking at the properties of my network adapter (Intel(R) Ethernet Connection I217-LM) I see the vmware bridge protocol and the vmnetbridge service is running.
So next I try the "restore defaults" in the network editor - no change. I try removing the protocol from the adapter and I get error 0x80070005 but if i click OK and go back into the properties, it's gone. I can't add it back, because I'm told it's marked for deletion. So I reboot, try to add it, and I get access denied, but again if I close the dialog, and go back, the service is now there.
I'm just in a workgroup and i have not applied any Group Policies...
Happy to try any suggestions...

Uninstalling AntiVirus and or EndPoint Security software has been discussed a considerable number of times and has been discussed for many years and uninstalling any given AntiVirus and or EndPoint Security software is SOP when dealing with some issues with VMware Type 2 Hypervisors, especially when there are Network related issues. At times both Avast and Kaspersky as well as others have been mention in these forums and at times in the product release notes too.

Similar Messages

How can i increase the height of the navigation toolbar to make my persona more visible? adding toolbars puts them all below the navi bar and it looks weird. i know this has been asked many times but the answer's always "add toolbars".

How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".

Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

Burning issues and yes i know this has been posted up before

Ok , just like some indicated before that my itunes use to burned perfectly on maximum speed , so after a while i had a few problem in burning it would start burning then 10-20 sec it would say disk error or something like that and i would lose the recordable cd i inserted . So i went to 4x to see if maybe that would fix it but , the same dam thing happens and happens over and over making me lose recordable cd's again! without warning ! Can i some how fix this by cleaning maybe the lens with a cd lens cleaner or will that mess up my lense on my mac osx? How can i fix this problem ? thanks

I would suggest first having a look at How do I clean my CD recorder? I would have to say that you should never have to clean a CD or DVD drive, and if you really really really can't resist, try using some canned air using extreme care.
If you don't already have canned air, and don't have any other optical drive "snake oil" remedies, then I would say the likelihood of effecting a sound repair based on investment in such would not be in your favor.

I know this has been asked several times but I never saw an answer,

What can you do if you get this error:
Podcast was not copied to ipod because it cannot be played on this ipod.
I am using the latest firmware upgrade and itunes. I bought my ipod touch last week so it already had the January upgrade.
I changed all to acc format. Then reversed the unicode on the ID3 tags Like a Apple herlp screen suggested. I reset the ipod and then restored. Can any one else give any other suggestions.

Hi Clamo!
Well, I think I know what's your problem. If you donwloaded this podcast from iTunes Store, then you can only sync it to your iPod, if the Podcast has the perfect format for iPod! So you can't sync HD Podcasts or Large size... You need to download iPod size podcasts or over the correspondent "Convert Selection to iPod/iPhone". Then, you'll be able to sync it with your iPod Touch

I know this has been asked multiple times but there still hasn't been an answer: my iTunes 10.2.2 will freeze my entire mac upon opening...

... and it's been doing this for a while. PLEASE, I need a solution. It started off (many moons ago) as occasional freezing when listening to music and then one day it froze and stayed frozen. So I restarted my computer and after that, iTunes was never the same. I deleted the version I had and downloaded the newest version. At first, it took a whole night (and by night I mean 12 hours or so) to put all my music back in iTunes and once that was done it would attempt to determine the gapless playback. After a while the number it would reach before it froze got smaller and smaller until it just stopped trying and froze my whole computer the minute I opened it. I mean, I can't click on ANYTHING once the iTunes icon stops bouncing. iTunes will pop up and then that's it for my computer. I tried leaving it alone for an extended period of time to see if it would unfreeze itself and it doesn't.
PLEASE, I need a solution, as I'm sure many other people do as well. All I see are threads about similar issues with no solution handy. I've repaired disk permissions, I've deleted the little com.apple.iTunes whatever that I was supposed to delete (and it ALMOST helped but didn't really), I've reinstalled and reinstalled, and it gets so frustrating because nothing is working.

Your example uses straight text links. Nothing fancy, no complicated JavaScripts are used. Just a lot of manual linking.
Example: http://www.aidenart.com/Concept%20Art%20Pages/ConceptImage1.html
PREVIOUS: http://www.aidenart.com/Concept%20Art%20Pages/ConceptPage2Arga.html
MAIN: http://www.aidenart.com/ConceptArtMain.html
NEXT: http://www.aidenart.com/Concept%20Art%20Pages/ConceptPostitTiratsu.html
Each page contains a different PREVIOUS and NEXT link depending on where it appears within the site.
Hopefully this answers your question.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

So, I know this has been asked before. But, has anyone heard from Apple?

So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
Anyways, thanks for any help !

Wow, easy there company boy!
I've heard all of what you spit up before. And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play. (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"." Again, I don't want it on muteReading your post made my eye twitch at least three times.
This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

I know this has been asked before But I Deleted 6 mths worth of Bookmark folders, Cant use Undo,

I know this has been asked before But I Deleted 10 mths worth of Bookmark folders, Cant use Undo & havent backed up (live & learn) Someone posted do a restore from "Import & Backup" My listing in Restore is only 2010-6-29 back to 2010-6-22. Is this the way to go to retrieve as much as possible or is there another solution?

Those dates are when a backup was automatically made by Firefox, not dates when you saved specific bookmarks. Try restoring the backup from the day before you deleted all those bookmarks. It will restore the entire backup file - not just what you deleted, you will lose any bookmarks that you saved after the date of the file you restore.
[https://support.mozilla.com/en-US/kb/Lost+Bookmarks]

Contact Form - I Know this has been asked before. . .

Hello
I know this question has been asked before! But even searching the forums hasn't got me the direct answer i am after.
I need a 'Contact us' form on a website and i have come across posts with people who have got part way with one and needed help - but i need one from scratch. .
I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has??
All help will be greatly appreciated. . .
Thanks

I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has?? [sic]
"Varkgirl"
http://iweb.aardvarkland.com/
Mark

Communication Error - Yes I know this has been made.

As stated previously, I know these have been made before, by a lot of people. I have yet to find an answer that works. I have tried setting up new locations like the youtube video. I have tried to open said ports, and I have tried turning on UpNP and all of the other tricks. I still cannot get video chat to work. I will do my best to provide all info that I can to get this to work.
Obviously, this is the dreaded Communication Error, "You did not recieve a response from [name here]"
Current Specs:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Using Mac OS X 10.5.3
Router is a D-Link DI-624M.
This is all updated with firmware and is current (v2.5). Any help would be greatly appreciated, thank you.

Routers
The table below lists common household routers qualified for use with iChat AV. No additional configuration or port forwarding is required. There are two assumptions for using one of the listed routers:
1. There is only one router between your computer and your Internet service provider. If you are on a complex network, ask your network administrator about any routing issues.
2. That a firewall has not been enabled on the sending or receiving end of the iChat AV conference. Optional firewall features on routers may block ports, as may firewall software used on computers. See technical document 93208, "iChat AV: Ports That Need to Be Open Behind Firewalls".
Of course Port Forwarding says this
http://portforward.com/english/routers/port_forwarding/Dlink/DI-624/iChat.htm
For Pics where the firewall access is
http://portforward.com/english/routers/portforwarding/Dlink/DI-624/AIMTalk.htm
It will be worth checking if Ports need to be open to be allowed though the firewall.
9:53 PM Thursday; June 26, 2008

I'd like to go back to a specific date in my messages? I know this has been asked billions of times.

(Specifically April 30 of 2013) but I text a lot so pressing "load earlier messages" isn't an option. Is there anyway I could load the messages on my computer, or is there an app that I could use to search by date? I could get them off my iphone or ipad.

Hi,
The iPhone (iOS Device) and the Mac will only Sync from the day that both start using the same App ID or OS X 10.8.2 whichever is the earlier.
The "Sync" as Apple calls it was different before this time.
The "Sync" is only "Display on all Devices" and does not involve anything else (if you delete a message on one device it remains on the other)
The iMessages are "pushed" at the devices that have the Apple ID or iPhone number and when the iMessages has been sent that is it.
It will not re-sync if you remove the iMessage.
I really don't use iMessages on my iPhone enough to even try "Load earlier Messages".
If you have synced (Backup) the iPhone onto the Mac using iTunes it is apparently possible to extract the messages from the Backup.
However I don't sync this way and don't know the names of the apps involved.
9:06 pm Wednesday; February 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Not to belabor the issue, as I know this has been asked befo

Is there an aftermarket charger that people agree works with the Zen V? I had looked at the Gomadic and Boxwave models, but still cannot seem to find a consensus as to whether they actually work.
I have an old USB charger from RIO Carbon I had. It's output is 5v, amp, but it does not seem to work. Nothing semed to happed. A bit later the player died. Not sure if the two were related.
Thanks, RALPH

Well I ended up getting the PowerMac Dual 2.5 from my friend. The local tech support guy told him the processors when out on the unit and he decided to get a new one. This unit sat in his basement I would say a good couple months packed away. After he gave it to me last week I plugged it in with not much hope. However, to my surprise it actually powered up and has been working great now! It has not given me a single issue. I even purchased Techtools Pro and ran the tests and everything came back pass.
Now, the only thing that concerned me was when I turned it on for the first time. I heard a slight gurgle noise that came from the liquid cooling. It lasted about half a second and I have not heard it since. I pulled the cover off of the processors and looked for signs of leaking. Everything looked clean (no signs of corrosion). However, the mosre I am using this unit, the more I am liking it. Now I am starting to get worried in the back of my mind that a leak could be there and I would like to prevent any damage.
Is it fairly easy to remove the cooling unit and do a better inspection? I am sure there is people how mapped out detailed instructions on how to do this. However, I was just wondering form someone first hand if this was not that hard. Nothing more then patients and common sense?
Thanks again

Yes I know this has been covered but not answered

Hi I have an IMac that is only a few weeks old with fully updated software on all levels.
Ok so I get that I had to go buy an external CD drive so that I can be old fashioned and still burn music from my CD's into ITunes. I get that I will have to replace my 5.1 surround sound speakers because Jacks and Plugs change over time.
What I cannot fathom is why this silly ISight camera just doesnt work on a chat site I have been a member of for years. Yes its a flash based chat room and no when you right click the ISight camera is not in the list there is only one in the list and it aint the built in one.
Can anyone tell me where I can go to find out how to control this camera - there is no camera or video control under the system preferences - I have ensured that Photobooth and other programs that may use the camera are off or logged out - I have googled extensively - I have even emailed the chat host...
Where can I get access to some camera controls or software that will enable the cam to talk with a broader range of sites??
Max

Ok so use  > System Preferences ... > Flash > Advanced to verify you have the latest Flash software update that is compatible with your system.
Ok so then also check  > System Preferences ... > Flash > Camera and Mic to verify that your Flash settings are not blocking the camera for the site(s) you want.
Ok so if your trouble continues after the above, see How to Troubleshoot iSight.
Ok so at this point, if your ONLY trouble in every user account you tested is with Flash-based camera sites, you need Adobe Flash Player Help.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Dark Epson prints. Yes I know it has been asked before!

Having invested in Lightroom 2 (and now 3) and Photoshop CS5 I am starting to get to grips with them.
However I cannot get them to print correctly with my admittedly ancient Epson R300.
For color management:
I have tried managed by printer and various settings of color management within Epson (color controls and photo enhance)
I have tried Epson profiles in Lightroom or Photoshop and colour management switched off in Epson (ICM and no color management)
None work fully satisfactorily; mainly they are too dark and none are close to the screen image and the real image in terms of colour. I take photos in Raw format and have even tried saving photo in jpg format through lightroom and then opening jpg and printing the jpg but still not good.
However if I open jpg in my old freebie Photoshop Album Starter edition 3.2 and print hey presto a reasonable print!
Why can my super sophisticated Adobe products not print pictures correctly that my free Adobe product can?
Any suggestions grateful recieved

thanks for reply
whilst display is not calibrated the picture on screen is a fair representation in terms of colour and i can print that "fair representation" via photoshop albulm or, in fact, through online commercial digital serivces like photobox or even windows photo viewer. It is just a problem with lightroom or photshop cs5

FROZEN - yes i know this has been posted a zillion times.

Hey =]
well today my ipod became frozen with the "Do not disconnect" screen. i toggled the hold switch, held down the menu and play button, and did everything the support said. but theres no response. Is there any other tips besides letting the battery drain or taking it to some ipod place or something.
THANK YOUU <33

As I said in your other thread...
You are not resetting the iPod correctly.
To reset the iPod, hold down Menu+Select for 6-10 seconds (assuming you have an iPod nano/iPod with click wheel).
See this for more info...
Resetting iPod
btabz

"no un-bridged adapter" - and yes, I know this has been asked many times before :)

Similar Messages

Maybe you are looking for