No updatable devices found after firmware update

Unfortunately I didn't check here before doing the latest updates. I dl'd the following on the night of July 1:
2007-07-01 01:49:08 -0400: Installed "SuperDrive Firmware Update" (2.1)
2007-07-01 01:49:31 -0400: Installed "iTunes" (7.3)
2007-07-01 01:49:35 -0400: Installed "Safari 3 Beta Update" (3.0.2)
2007-07-01 01:53:02 -0400: Installed "Mac OS X Update (Intel)" (10.4.10)
2007-07-03 00:30:01 -0400: Installed "Audio Update 2007-001" (1.0)
Since then each time I restart the computer the SuperDrive Update launches and tells me no updatable devices have been found. But this machine has a SD, unless I'm very much mistaken. Why won't the update take? Is it related to the ex HD issues I've been reading about here with 10.4.10?
I also just looked at my sys log and it could be its own novel since these updates. I was going to post it in hopes it would help the Mac guys smarter than I, but I think it would flood out this post.
I am also having the internet drop issue, again only when I'm on battery power, but I understand that's a bigger issue than just my machine. My Safari windows seem to be hanging and giving me the spinning beach-ball a lot when I try to scroll.
I ran disk repair on permissions, that's all sorted out. I don't know what else to do to resolve the firmware update. Please help. Thanks!

At the risk of sounding stupid.. how would I delete the download?
And if I have a SuperDrive, which I do, why wouldn't the update apply to me and why would Software Updater have prompted me to download it in the first place?

Similar Messages

No Bluetooth Device found after BIOS Update

Product Name and No.: HP dv6516tx
Operating System: Windows XP
Error Message: No Bluetooth device found
Changes Made: Updated BIOS to most recent version F. 5A
System Information:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name UDAYMITTAL-PC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv6500 Notebook PC
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 13 GenuineIntel ~1496 Mhz
BIOS Version/Date Hewlett-Packard F.5A, 3/22/2010
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5687 (xpsp_sp3_qfe.080930-1426)"
User Name UDAYMITTAL-PC\Uday Mittal
Time Zone India Standard Time
Total Physical Memory 4,096.00 MB
Available Physical Memory 2.23 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 4.83 GB
Page File C:\pagefile.sys
Problem Description:
Yesterday I updated my laptop's BIOS to F 5A - latest available on HP Website. Since then I have lost the bluetooth functionality, which was wroking just fine prior to the update. Now the system doesn't find a bluetooth device.
What I have already done:
1. Switched back to previous versions of BIOS (available on HP Website coz I didn't note the BIOS version before I updated it). - That didn't work.
2. Reseated the wireless card - Didn't work.
3. Manually checked the connection of bluetooth module to the motherboard - Connection was fine but it still didn't work.
4. Uninstalled the bluetooth driver and reinstalled it (HP integrated module WIDCOM) - still didn't work
5. Installed HP Wireless Agent - Didn't work
6. Installed HP Integrated module driver along with HP Wireless Agent - Didn't work
7. Installed Ubuntu to check if its recognizing the device - Even its not recognizing the device which it used to do earlier.
8. Sadly there's no BIOS setting in Setup which I can change to correct the bluetooth behaviour (Phoenix BIOS with limited interface).
After all the research, I am posting this because I am unable to find a sloution to this problem on my own. I request the members to please help.
Uday

I got the bluetooth working. Had to dismantle the laptop and found that a small switch was loose.

[workarounded] no device found after installation

I just installed arch on a dell inspiron R (came with windows 8, now erased from the hd) from a USB uefi image. Everything went well (so it seemed) but after rebooting i only get a "check media [failed]" and "no bootable device found". I alredy reinstalled everything the second time, just to be sure.
Since i got no errors of sort during the installation process I have no idea where to look. Is there something I can do from the uefi shell to see where the problem is?
Last edited by Box0 (2013-04-12 12:55:16)

I followed the beginner guide:
1) created 3 partition (efi,root,home)
2) installed the base system
3) installed efistub (installation went well, but it didn't boot)
3b) removed efistub and installed grub2 (installation went well, no errors, but it still didn't boot)
4) restarted the entire installation process, this time installing grub2 first, again no errors and no
boot.
In the bios setup (or whatever is called now) I have three options:
1) legacy boot mode
2) uefi boot without secure boot
3) uefi boot with secure boot.
I'm using the second.

No Devices Found (Input and Output) After 10.9.3 Update

Hi,
I just update my Macbook Air (Mid 2013) to 10.9.3. After I finsih updating, I got a problem of no sound at all. Also when I check on System Preferences it shows that "No (Input/Output) device found".
When I try changing the volume using the volume control key on my keboard it shows this image,
I already tried doing some audio bug "fix" trick like reboot, deleting BezelService Preference File, and reset PRAM. However, nothing work.
I am not sure whether I have to reinstall just the audio driver or anything. Audio bug has always been an issue for me since I update to Mavericks.
Could anyone help?
Thanks!

Hey Tetsukara,
Thanks for the question. It looks like you have already done some great troubleshooting on this issue. I would recommend following the steps in this resource:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
If your issue persists, you can follow the steps to contact Apple support or obtain service:
5. If the issues persist, contact Apple support for further troubleshooting assistance.
You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Thanks,
Matt M.

Recovered from disaster after firmware update 7.4.1

I have spent days trying to get connected to Airport Extreme Base station (two months old) after the last firmware update. I have seen many people with same or similar issues. The usual "doesn't detect wireless device" messages. I finally had some luck running from my clone drive using an older airport utility. At least I could get it to register the base station but only by using an additional ethernet patch cable to my laptop. Then it would allow me to adjust settings. Still things were not right. Connection was not good and I could not use the (802.11n(802.11b/802.11g compatible) settings at all. Sometimes I would get almost there and it would ask for my Network password and then say "connection timed out."
Then I found this post:
http://newtonpoetry.com/2008/08/18/airport-base-station-fix-revert-your-firmware /
Gave it a shot and everything is perfect now.
I reverted to older Airport Utility and older AE Base Station firmware
I downloaded and installed older airport utility 5.3.1, first deleting the old components:
/Applications/Utilities/Airport Utility
/System/Library/CoreServices/AirPort Base Station Agent
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
I had to delete the Agent while booted from another volume since system won't let you delete that. The older Airport utility installer may have replaced the newer one with the old one but I wanted to be sure.
Then I launched the old version of Airport Utility and followed directions, in the above url, to revert to the older firmware 7.3.1. Restarted laptop, opened Airport Utility and voila! Instant recognition. Changed a few settings including the (802.11n(802.11b/802.11g compatible) radio frequency and it all works flawlessly. Range is fantastic again. Very good speed.
I am not suggesting everyone revert to the older (less buggy?) updates but for me there was something very wrong especailly after Firmware 7.4.1. Hope Apple can make these more user friendly soon. I would love to know if anyone, or Apple, can tell me how to fix this issue using the latest updates. I tried every suggestion out there. Hard resets, restarting modem, turning off phones and other "interference", over and over with no luck.
That's my story, so far.
Rob D

Sorry... please disregard my previous question...
I've found out how to downgrade the firmware...
Of course!!! My connection is flying above 6Mbps again Whoa!!! I'm relieved...
For you folks who do want to find out how to downgrade:
1. Reboot the time capsule
2. Connect to it using the airport utility
3. Hold Control/Option key and click File > Check for Updates
4. Select the version you want to downgrade to, click Download
5. When down load completes, click Base Station > Upload Firmware
Select the version that you just downloaded and submit...
Wait about 5 minutes and it will restart... this restart takes little longer than usual... but it will come back.
Good luck all!!!

Mifi4510L connections issues after firmware 2.23 update

Just updated my mifi firmware to v2.23
Immediately upon restarting the unit it will no longer connect to Verizon's 3G/4G data network.
Checking the advanced diagnostics tool I found that the unit will not synch with the data network (no IP address) and will not connect when attempting manual connection.
Called tech support, after talking with 2 different reps my problem has been passed onto engineering with no estimated time of response.
Unfortunately the first rep tried to indicate that problem was related to my Macbook Pro. Tried to download the update using my XP virtual machine but the dowload pdf would not open.
Hopefully this issue will be resolved quickly before I have to request an adjustment to my MRC for the time that the unit is nonoperable.

Hello,
The problem is with your Mac. Many users have reported problems where the Mac upgrade left thier MiFi bricked. Follow JeffR's steps to resolve the problem on your own. Try to use a WinXP computer if at all possible.
If you have a Mac "bricked" Mifi:
1. Run the installer, the Mifi will show up as a USB Human Interface Device and the upgrade will not start (cannot find the device)
2. The installer leaves a directory (C:\MiFi4510L) and there's a program called DUU_Verizon_MiFi4510L.exe
3. Run that program, it will find the Mifi, and ask if you want to enable the modem functions of the Mifi.
4. Answer yes, then disconnect and hit the reset button under the battery door.
5. Now reattach to your PC, and rerun the upgrade program. This time it will work.
JeffR
http://community.vzw.com/t5/Broadband-Netbook-Devices/MiFi-4510L-Firmware-Update-2-23/m-p/719523#M7431

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

Lync 2010 Polycom CX600 phones fail to sign-in after firmware update

We're running the latest version of Lync2010 in our environment of approximately 1,500 Polycom CX600 phones across 5 Standard edition sites. After rolling out the latest firmware update 4.0.7577.4444 this weekend about 10% of the phones do not come back
online as the user they were previously signed as.The firmware was approved on a Friday evening and Monday morning we were still experiencing the issue.
The phone is stuck in the following error message:
"Sign-in Error
Cannot sign in. Please verify your sign-in address domain\username, and password and try again."
The phone did update to the latest version of firmware but is stuck in "limbo". Doing a traffic dump on the port it's connected to did not reveal anything as the phone is not attempting to communicate with any servers. Only a power
cycle (unplugging POE LAN port) makes the phone sign back in. Just to clarify, after the power cycle the phone signs back in on its own as it seems that it still stored the user's sign in information.
We connect to the voice network via LLDP and we have Alcatel-Lucent 6250 switches that these phones connect to. We also have the DHCP options for the phones to find our voice network for areas that do not have LLDP capable switches.
Just to recap, about 150 phones experienced this issue across all sites and we cannot narrow it down to anything specific about the environment. Performing a power cycle fixes this issue but it is extremely annoying.
Any suggestions?

Check the similar thread at
http://social.technet.microsoft.com/Forums/en-US/771ab6d9-908f-4545-b94f-ef51ab0cca60/polycom-cx600-cant-sign-in-after-firmware-upgrade?forum=lyncvoice
Try to move back to the previous version or you may need to reset each phone manually.
Lisa Zheng
TechNet Community Support

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

HT3228 How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out? I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out? I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

Sometimes it is fruitless to try to "fix" a broken account on an iOS device. I would delete the account on both devices and then configure the account again from scratch.

OS 8.0 update OTA to my 4S has killed the device. After the initial attempt failed I tried via iTune Restore and got Error 29. Attempts to restore to an older version (7.1.2) failed as well. Same error. The phone is stuck in the familiar "connect to

OS 8.0 update OTA to my 4S has killed the device. After the initial attempt failed I tried via iTune Restore and got Error 29.
Attempts to restore to an older version (7.1.2) failed as well. Same error.
The phone is stuck in the familiar "connect to iTunes" screen.
Has iOS8 destroyed my phone?

Hi vijay294,
Welcome to the Apple Support Communities!
I understand that you received a restore error while attempting to update to iOS 8 and now you see the Connect to iTunes graphic on your display. In this situation, I would recommend using recovery mode to restore your iPhone. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

No updatable devices found after firmware update

Similar Messages

Maybe you are looking for