No update time stamp in the saved data file

In NI Example Finder, there is a file called "Fieldpoint Datalogger.vi". I flip the "Time Format" switch to "HH:MMS" and the "File Type" switch to "Spreadsheet". The data saved into a file have time stamp at each line. However, the time stamp in each line of the data file saved as the same time without any update to the most current time. I put sampling frequency for 100 ms and saved as 50K bytes file size, but all the time stamps in the file show one same time (I believe it is the time to start to save into file and keep repeat it). How can I get the update time stamp for every 100ms or 500ms and save that time stamp into the data file from this "Fieldpoint Datalogger.vi"? Should I change anything on the subVI called
"embedded FPLog.vi"?

Hello,
Fieldpoint systems usually base the timestamp on the National Instruments Time Server, which is installed on any computer using the Fieldpoint driver. This means that you can configure the Time Server on a Fieldpoint system to continuously check the system time of any computer on the network that has the Fieldpoint Driver installed by referencing its IP address.
If the timestamp is not updating, then we should first verify that it has been configured properly.
Take a look at the following Knowledge Base and let us know if using the listed steps takes care of this issue.
http://digital.ni.com/public.nsf/websearch/C4E56AD6450FC5FD86256DFF0007FF01?OpenDocument
Best regards,
Justin Tipton
National Instruments

Similar Messages

  • When and how to update the "saved data" in report ?

    Hi,
    The BO version is "BusinessObjects Enterprise 12.0"
    The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
    How to view the update data while click the "View" in CMC/InfoView ?
    I have tried to schedule it , then can see the update data in "View the latest instance".
    Is there any approach to refresh/update the saved data in the report ?
    Thanks and regards,
    Forest
    Edited by: Forest lin on Dec 5, 2008 12:12 PM

    Hello Forest lin,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Date and time stamp for the file

    Hi Experts,
    My Requirement is to create a csv file with the name testfile_date&timestamp.
    If i select add time stamp in the receiver file communication channel the file be as testfile_yyyymmdd_hhmmss_XXX.
    The XXX is message id which comes by default by selecting add timestamp option.
    but, i don't want the message id displayed in the file name.As i know from the blogs  we can reach this requirement as per Michels blog
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    I am not clear in the mapping. after writing the udf, to which filed i need to map with that udf.
    can you please tell me stel by step how how to do mapping and how to achieve the requirement. request you to send the code forthe  udf.
    Thanks
    Rahul

    Hi,
    you can wirte udf and map it to root element of the target message type. u just need to execute the udf.
    UDF:
    // UDF havs one input parameter - timestamp
    Code:
    DynamicConfiguration conf = (DynamicConfiguration) container .getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String OldFileName  =  conf.get(key);
    String newFileName  =  "";
    if (OldFileName != null) {
        newFileName = "testfile_" +timestamp ;
        conf.put(key, newFileName);
    return  newFileName; 
    Mapping:
    Date (standard function) [Formmat yyyyMMdd_hhmmss] -> UDF -> MesageType.
    Thanks.
    Ritu

  • SMQS: when is time stamp in the "last change by" changed?

    Dear Gurus,
    Recently we are encountering issues in our OUTBOUND queue of ECC. In a certain time queues pile-up to almost 2K and are in status READY.
    *Integration is ECC <-> APO
    To understand if its a QRFC issue or a Overloaded WorkProcesses, we need to isolate each case.
    First we assumed that the reason of having the READY status are:
    1. due to the change in TYPE of the queue name (APO system) from R to U or vice versa
    2. due to the change in STATUS of the queue name
    What we would like to know is, what does the time stamp consider upon updating?
    Are those assumptions above correct?
    Also the User ID seems not being updated.
    I asked the user indicated in the "last change by" if he did some change, but responded that he is not performing any change in the QRFC for the past few days. But it shows his name and current time stamp.
    thanks and regards!
    Zeek

    Dear Babu, really appreciate your response on this.
    Unfortunately, when i look into SMQS the APO system queue was already set to R. Upon checking the "last change by" (double clicking on the TYPE) i see that the time stamp was at current date and time.
    And the only thing that can help us catch who/what is the cuplrit (user/background process), is to understand what are the factors that the time stamp in "last change by" considers. Also the user indicated in it, was saying he hasn't performed any changes that day... What bothers us is that it might be a background process as the time stamp keeps changing every time... Usually, for what i noticed, the time stamp there only register the date and time when our system had the support pack updated. but recently, it is showing that its been changing every day.
    Moreover, our basis folk just assumes that the time stamp considers both the update in TYPE and as well as the change in STATUS. He is saying that the change in activity (when ECC transfers data to APO) is the reason behind the change in time stamp. For us to prove it, we checked on /SAPAPO/CC and saw that the last update of CIF/Any changes in ECC is similar to the one in SMQS last change, so it is not a valid reason, though the time is quite near what SMQS says.
    So what we need to understand is that, was it really the CIF/any updates in Orders going to APO does trigger the time stamp change in SMQS "last change by"?
    thanks!
    Zeek

  • How to read a time stamp from the db without ".0" at the end

    Hi All,
    I have code that is saving the results of a query in a result set.
    When ever i read a time stamp from the db (mysql 4) it always adds ".0" to the end of it.
    I tried using the getTimeStamp, getDate, getString methods for result sets and was not able to resolve the issue.
    Am i missing something here?
    Thanks

    here is the code
    public static Table executeSelect(Connection conn, String qry)
         throws SQLException {
              Statement stm = null;
              ResultSet rs = null;
              try {
                   stm = conn.createStatement();
                   rs = stm.executeQuery(qry);
                   Table t = new Table(rs);
                   return t;
              } finally {
                   close(null,stm,rs);
    Basically the user is asked to enter the query and the connection settings and then i retrieve the data and return a table.
    Now if i try to print the value of the time stamp from the result set it adds a a .0
    So for example if am running the following
    select mod_ts from temp limit 1;
    | mod_ts |
    | 2007-12-28 09:32:58 |
    1 row in set (0.00 sec)
    When i print the value of the time stamp it gets printed as 2007-12-28 09:32:58.0
    The following code is used to generate a table from the result set
    public Table(ResultSet rs) throws SQLException {
              ResultSetMetaData rsmd = rs.getMetaData();
              int colCount = rsmd.getColumnCount();
              colNames = new String[colCount];
              colTypes = new int[colCount];
              for ( int i=0; i<colCount; i++) {
                   String colName = rsmd.getColumnName(i+1);
                   colNames[i] = colName;
                   int colType = rsmd.getColumnType(i+1);
                   colTypes[i] = colType;
              while ( rs.next()) {
                   if ( data == null) {
                        data = new ArrayList<List>();
                   List<Object> row = new ArrayList<Object>();
              for ( int i=0; i<colCount; i++) {
                   Object ob = rs.getObject(colNames);
                   row.add(ob);
              data.add(row);
    Now when i print the values in the result set it adds a .0 to the end of the time stamp
    I also tried using getTimeStamp for a result set and the same problem still existed

  • To have time stamps on the notes captured on serviceticket transaction

    Hi,
    Is there any option to have time stamps on the notes captured on an Opportunity / Quote / Order ..
    especially in serviceticket.
    the requirement is  to tag the notes entered in ST with TIMESTAMP.
    Hope u guys understnd my question .....
    sree

    Hi Sree,
    try the following comands you can use for the convertion of dates to timestamps and viceversa:
    CONVERT DATE dat [TIME tim [DAYLIGHT SAVING TIME dst]]
            INTO TIME STAMP time_stamp TIME ZONE tz.
    CONVERT TIME STAMP time_stamp TIME ZONE tz
            INTO [DATE dat] [TIME tim]
            [DAYLIGHT SAVING TIME dst].
    Best regards,
    Erika

  • Adding time stamp to the field

    Hi,
    All
    I need to pass the Current Date and Time Stamp to the Target Field
    For Current Date there is a Standard Function Is There ,For Time stamp Is there any Standard Function is there or we Need to write write UDF ,if we need to write to UDF Please provid Java Code for that.
    Marks is awardble
    Thnx in advance
    Regards
    kumar

    Hi,
    Using this java code you can get both Date and Time...
    import java.util.Date;
    Date d = new Date();
    return d.toString();
    The format returned will be like this "Tue Dec 26 12:15:24 IST 2006"
    To change the format, you can use get methods( getDate(), getHours() ) of Date class and concatenate them.
    Regards,
    Uma

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • My 2 TB Time Capsule's memory is full because it will not automatically delete old files as it is supposed to, so it is giving me zero backup of my two computers now.  How can this be fixed so my Time Capsule deletes the old data and saves the new?

    My 2 TB Time Capsule’s memory is full because it will notautomatically delete old files as it is supposed to, so it is giving me zerobackup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and savesthe new?
    Neither my local computer consultant nor I have been ableto change any of the settings in Time Machine to correct this problem.  Working with the choices in the TimeMachine, there does not appear that there is any way to change the frequency ofthe backups either, so, after a year has elapsed, the time capsule is full, andmy only choice appears to be to erase all the current data on the Time Capsuleand start over, something that I do not want to at all let alone repeat on anannual basis.  My questions are:
    What can be done to have my Time Capsule delete old filesas it is supposed to do, so it has memory available to allow my computers toback up? 
    Is this a software problem that can be fixed online or isdoes this require a mechanical fix of defective hardware?

    How much data is being backed-up from each Mac?  (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
    Is there any other data on your Time Capsule, besides the backups?
    Most likely, there just isn't room.  Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't.  Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
    Also see #C4 in Time Machine - Troubleshooting for more details.

  • I would like to format cells with time only.  when I enter a time of day the current date is still in the cell which is not necessarily so

    I would like to format cells with time only.  when I enter a time of day the current date is still in the cell which is not necessarily so.  THere are  no options for just  date .

    christine275 wrote:
    ... (this is a time worked by date and not always entered on the date worked)--
    "Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
    If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
    The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
    Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
    The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
    Regards,
    Barry

  • In deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    in deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Contacts: where is the local data file saved?

    Where does Mountain Lion store the local data file for the Contacts app?

    It isn't a file. It is a collection of files, indexed with a sqlite3 database, which is all stored in your user Library/Application Support/AddressBook folder.
    To get to your User Library, in the Finder, hold down the option (alt) key and select Library from the Go menu.

  • Include time stamp in Write to Measurement file

    Dear Experts,
    I would like to include the time stamp in the data sheet I saved using a Write to Measurement file. Currently only 1 column of data was saved without the time stamp. Is there anyway I can save the data together with its time stamp in a single file (side by side column)? 
    Thank you.
    Regards,
    CYTeoh

    Did you configure the Express VI to create a time channel:
    Christian

  • Saving data files for backward compatability.

    I am currently saving the data in my appplication as a datalog file (LabView specific). The data contains strings, clusters, arrays etc.. so it's not a case if simple Binary data)
    The problem I have is that the software/program is always being developed and more variable added to be saved. This software is kind of in use and I therfore need the old data files to be backward compatible with the new program.
    With datalog files, you have to provide an image of the exact data file structure to load, so obviously with the new data structure, the old files will no longer load. How can I over come this? Is there a simple way.
    The only way I thought of, was to save my data in.csv format. For example, I would save an exce
    l/array matrix of say 20 x 100 which would give me 2000 cells to work with (plenty). I could then save all my data into this file, but always saving a 20x100 matrix, so even if I update the program in the future to save a further 5 data values/clusters etc.. for example, the saved matrix would not need to change and it would simply have the same image, but with 5 more cells filled.
    Would this work?
    I theory it sounds feasable, but do you have another/better method.
    At present, I am using datalog file I/O and simply save a few extra blank clusters/doubles etc.. so I have a bit of scope to add thing, but this is not aceptable really.
    There would also be other benfits for me if I use a .csv excel file, but it's not critical, other file formats will also be ok.
    Thanks for any help/advice.
    ADE

    ADE
    It sounds like your question would be better answered in the general LabVIEW forum. This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module, which is an add-on software package for LabVIEW. Your problem could be solved by using the DSC Module, but your question does not sound like you are thinking about using the DSC Module.

  • I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I have written a binary file with a specific header format in LABVIEW 8.6 and tried  to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I can think of two possible stumbling blocks:
    What are your 8.6 options for "byte order" and "prepend array or string size"?
    Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for