No updates avalible? 10.4.3

I have a iBook 800mhz 640mb. I have 10.4.3 installed from a DVD with 10.4.3. When I do a Software Update it says there are non available. If I download the updates directly and try to install it indicates that they are not compatible. I think this is wrong I should be able to go to 10.4.(11?) I have even tried forcing the install with pacifist but that breaks the OS
Any Ideas, I actually have 2 ibooks with this problem.

Well I am looking for the DVD now but can't find it. I purchased an Family license which I believe gives me the right to install on 5 computers. All my other Macs have been upgraded to 10.5 Legally. This does not help me with my issue though. Unless knowing the specific DVD version number helps.

Similar Messages

  • HT1657 I started watching a rental.  A "new update avalible" popped up, so I clicked it to move it out of the way.  Now my video disappeared and I don't want to pay another 5 dollars to rent it again.  What do I do or click?

    I started watching a rental.  A "new update avalible" popped up, so I clicked it to move it out of the way.  Now my video disappeared and I don't want to pay another 5 dollars to rent it again.  What do I do or click?

    The photos are on the ipod.  Photo sync will erase them.  I need a way to extract them from the ipod, or to.extract them from the ipod backup that is who knows where on my PC.
    I've been searching for an app to do that with no luck.  They all seem to want a newer OS than is on my ipod yet I have the most recent update installed.

  • HT4972 is there a new update avalible

    I heard on the news yesturday that there was a new update coming out today June 11th. is that so and when will it be avalibile for downloading

    There has been no update announced as of yet. If there is one,
    it will be available via iTunes or over the air software update for
    those already on iOS5. You may wish to check your source for
    exactly what was said.

  • Error:no update avalible

    i have a 6131 and i cant update it
    im from spain,movistar and my nokia code is: 0536329
    can anybody help me please?
    thx

    my current version is 3.70 (12-05-06) and i have read
    ( http://europe.nokia.com/A4144902 - what's new in software ) that there is a new update: Update Nokia 6131 phone software (firmware) over-the-air (07-Jul-06).
    my version have a lot of bugs :\
    thx

  • My iPod is a 4th hen and I cannot update to 4.3 I am stuck at 4.1 and there is no update avalible what should I do to update?

    my iPod though is a 4th generation and it has version 4.1 and I cannot update to any new version the isn't any softwear updates what should I do?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • Can Not Install OS Update 10.1.0.2014 Onto My Z10

    Hi, I have beem trying to install 10.1.0.2014 onto my Z10 on the Telus Mobility network.  I have spent hours trying to get this problem figured out.  I have tried over the air update 4 or 5 times.  It seems to download normally and install.  But, when it says to reboot the reboot icon goes to 100% and stays there.  I have let it go up to 6 hour but phone will not reboot.    I have also tried installing numerous times using the Link software and the www.blackberry.com/update and the same thing happens.  Icon goes to 100% but goes no further after numerious hours, will not reboot.  I also tried reinstalling software using the Link software.  When I begin reinstall process on the Link software, it says there is a software update avalible and asks if I want to install update.  If I click yes the update installs to the 76% level and says there was an error.  When I click retry, the same thing happens download stays at 76% and will go no further.  If I click to reinstall software without the update it reinstalls.  But, then when try to install the update, it gets stuck at the 100% for a few hours and goes no further.  I was on for an hour and a half with Telus tech support but they couldn't help me out.  They told me to call BlackBerry.  I am so upset, I've been loving my Z10 until this problem began.  I have been trying to get this problem corrected for quite a few days.  I would be thankful for any advice.

    Of course I am upset. Would you like to be without your phone for a day and have to visit your supplier repeatedly for a problem they caused you? I have spent over $35,000 with Telus since 1997 when I became one of the first clients of the then Clearnet company (which gave Telus its branding that we see today). 
    Thanks for your information but here is the real issue. The Telus manager said that the one Installed now (and what would I know because I am basically a monkey that pushes the buttons when asked, this is the first time I have even looked at the OS version) which is OS version 10.1.0.273 would actually be a newer version so I should stick with it. He told me that release .2014 has problems reported online but that .273 is an approved release directly from Blackberry. if this is true then why would I upgrade? How does it help me? What has Telus added that assists me, saves me money, improves my experience? In other words I need a clearly articulated value proposition if I am to spend more of my valuable time on fixing this issue. I pay top dollar to be a Telus client and I expect results and performance from my suppliers. 

  • Macbook Pro Retina 13" wont boot after update. (28.01.2014)

    Ok.
    I got a notification that i have an update avalible, and i install it. It installs just fine and the Mac turns off.
    When I boot, the apple logo shows, and a progress bare appears, and seems to complete the update.
    But when the progressbar hits 100% it just turns of again. When i turn it on again, same thing happens.
    Its only 1 week old, and nothing else has been bad with it.

    You have 14 days from date of purchase to return the machine and exchange it for another. Unless you want to jump through some hoops to try to 'fix' what's wrong with your unit?
    Try booting into your Recovery partition (hold down the command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair your hard drive. I don't know that this will help - you may be stuck in some sort of infinite loop - but it's worth a try.
    Clinton

  • Update ALL adobe software with RUM

    I've created an internal AUSST server and I'm using RUM to update the Adobe software on the clients machines.
    After running RUM all the Adobe software seems to be fully updated but when I on InDesign and Folio Builder it tells me there is an update avalible.
    Is it possible to include the DPS Tools within AUSST and RUM?
    Thanks.

    Iam not so used to RUM yet, but it worked fine for me with AUSST 2.0.
    Are the updates available and downloaded at your server?

  • Lumia updating problems

    Hi can antone help please i have the firmware update avalible for my phone but i follow instruction plug into zune etc and its been " checking for update " for 5 hours saying dont use phone disconnect etc. i have 50mb broad band so i know its not that.. also zune looks for updates taking hours????? any suggestions???

    @infernas81
    I can't remember whether there are 8 or 10 stages of update process, so if it hasn't started by now it isn't going to!
    Happy to have helped forum with a Support Ratio = 42.5

  • Updating and Auto Login

    I've looked all through the forum and can't find an answer so here goes. I have my iMac set to automatic login to my wifes account. Here are my steps for runing Software update. I log out of wifes account login to admin, restart to CD, run disc utility to repair permissions, restart. Log out of wifes acct, back into admin, run software update, restart. Go through theoriginal steps from repairing a second time and restart. Now my to my question. Is it ok to disable auto login totally (forever) or do the updates need to have a full login to complete? Will the updates complete if the bootup stops at the login pane? Sometimes if there are more than one update avalible depending on what they are I may do run them seperatly (carry over habit from windows) this ads an extra step to updates. Thanks in advance.

    Admin account is separate and used only for installing software or running software updates and none of the other accounts have admin rights. I'm pretty sure that a permission repair can not be correctly done if you try to repair while the device is mounted, hence boot from the install CD and run permissions from there. That's how I optimized the drive (defrag) when I was running OS 7.2 all the way to 8.6.,(we won't even bring up OS 9, LOL) start the machine from my Symantec CD and repair and optimize from it then restart. So do I need to let the OS boot all the way into one of the partitions to "complete the install" and "finish the update process" or will it be perfectly ok if it stops at the Login pane?

  • After update OSX to 10.8.5, my graphic card (nwidia quadro 4000) say is not compatible, haw to fix that

    hı, today I update my osx and after that, I recive drive  not compatible for this system, message from graphıc card, before update that works nice...
    I try to download new drive from nvidia but its saye no update avalible...
    haw to fix that
    thx
    mac pro
    Processor  2 x 2,4 GHz 6-Core Intel Xeon
    Memory  32 GB 1333 MHz DDR3 ECC
    Graphics  NVIDIA Quadro 4000 2048 MB
    Software  OS X 10.8.5 (12F37)

    Recover from your backup, and if you don't have a backup, install an older version of Mac OS X on a second hard drive installed on your system and boot off that.    You can request the Apple Store support to make available 10.8.0, and you can install the 10.8.4 combo on top of that, if that was what you were last running.   For a listing of combo updates, see my FAQ*.
    Do not attempt to install 10.8.0 to 10.8.4 on top of 10.8.5 as some applications designed only for 10.8.5 may not work with 10.8.4 or earlier.
    Contact nVidia and make them aware of your issue.  Only upgrade once they have verified 10.8.5 compatibility.

  • Can't search from address bar!

    When searching in Safari I can no longer search directly from the search bar.
    I type my search in and press enter and the search term highlights blue and then the blue being to load blue however it then freezes and will not load.
    When entering a full web address Safari brings it up very quickly, smae goes for clicking a bookmark. Further if I go to the Google homepage and search it is also very quick and therefore I know it is not a slow internet connection. On our iMac Safari searches as normal so it is not the internet in the house either.
    I have tried reseting Safari with no result and there are no updates avalible.
    Please help this is really frustrating me especially as my Macbook Air is only a month or so old.
    Thank you very much for any help.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    If any extensions are installed, disable them and test.

  • Duplicate purchase, Region change AppleID, Purchased Apps

    Hi I have little problem here.
    I had US iTunes account and purchased some apps mostly for free (both free apps and some sales) now I moved to Czech Republic I don't have US credit card anymore so I changed my AppleID's country to CZ. Now there's two things, applications that I purchased but deleted them for later download is not anymore in my "Purchased" so I can't download them again and apps that I have in my library and go to their page in iTunes I have to buy them again (there is price on the download button) I tried to change back my country so I can solve the issue number one and redownload all purchased but I can't because of the US credit card and "None" is not in the options. Another thing is that for apps that I have in library there are some updates but iTunes will show me the number of updates but when click on it it says me that there are no updates avalible maybe with another AppleID, but AppleID haven't changed. I tried bought one app that I had previously to find out if it will be charged or just downloaded and it was charged, so I had to report a problem and the money will be send back, but I don't want to do this with all apps I have and I don't want to try it with another app if maybe that was a unusual case.
    Thanks for any help.

    Hello,
    Have you tried to connect to internet through a Proxy or VPN with a connection point in your native country where you purchased most of your stuff?
    I am not sure this works but if I were you I would give it a try
    somtimes you can find free VPN service included with the purchase of other services such Newsgroup Acces or NAS Network Area Storage.
    Some Free VPN (or small FEE VPNs)  offers serveurs ending up in US,UK,GERMANY,FRANCE you can choose from.
    Then you will appear to be connected from the selected country
    this might be some workaround to try out
    Good luck! and tell us if it works!

  • Encoding PP 5.5 clips in Media Encoder results in empty files

    I have several short clips that I send from PP 5.5 to the que in ME.
    When I start the que in ME several of the clips (they are about 2 - 5 sec each) are encoded correctly, but some clips are just blanks.
    The "ready" files are about half the size of what they should have been, and it looks like it is only the background thta has been encoded.
    When I just go back to the timeline and do the procedure for exporting again, they normally encode fine - withot me having to do any changes in settings or else.
    This is quite anoying - what could be wrong?
    Reagrds,
    Håkan

    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
    5.5.0
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    No updates avalible
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Windows 7
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    HDV MPEG
    If you are getting error message(s), what is the full text of the error message(s)?
    No error messages
    What were you doing when the problem occurred?
    Encoding the clip as said above
    Has this ever worked before?
    It works for several of the files, but some of them does not encode properly
    What other software are you running?
    None during editing and encoding
    Do you have any third-party effects or codecs installed?
    No
    Are you using Mercury Playback Engine GPU Acceleration?
    Yes
    Does the problem only happen with your final output, with previews, or both?
    Only final output. When clip is enoceded again, to replace the clip that did not encode, the encoding is ok, even if I did not do anychanges, just did it again

  • Messaging isnt working.

    I have an iPhone 4S and am updated to iOS 6.0.1 and it says that there is no software update avalible. When I go to the Messaging app it shows a blank screen with a blue top banner, the service carier's name and the battery percentage. I cannot pull down the notification's bar nor can I turn off the phone from here, but I can lock it and go to the home screen but there is no part of the Messaging app that works. I have tried turning the phone off and on and letting it run the battery all the way down and charging it all of the way up again and nothing in the troubleshooting page for Messaging seems to work. Please help. Thanks.

    YOu have to be provisioned by your carrier to use MMS.  Are you?
    Go to message settings - enable MMS.
    troubleshooting message http://support.apple.com/kb/ts2755

Maybe you are looking for