No updates to iSync in Mac OS X 10.4.10 update

Apple today released the Mac OS X 10.4.10 update:
Mac OS X 10.4.10 Update (PPC) - 25MB
Mac OS X 10.4.10 Combo Update (PPC) - 165MB
Mac OS X 10.4.10 Update (Intel) - 72MB
Mac OS X 10.4.10 Combo Update (Intel) - 293MB
To answer the inevitable question, there are no updates to iSync in this release. iSync remains at v2.4 and no support for any new phones has been added.

Apple today released the Mac OS X 10.4.10 update:
To answer the inevitable question, there are no
updates to iSync in this release. iSync remains at
v2.4 and no support for any new phones has been added.
Ok, fair enough.
However, I was looking in vain for an email address to contact Apple directly for a request to cover the phone I have. No matter where I looked, I kept being offered the discussion groups or a way to start a repair.
G4 500 MHz (work) & iMac 24" (home)

Similar Messages

No Updates to iSync in Mac OS X 10.5.7

Apple have just released Mac OS X 10.5.7 but there are no updates to iSync included. It remains at v3.0.2 (574.0)
Virtually all the Bluetooth system software components have been significantly updated from v2.1.3f8 to 2.1.6f8, which could bring improvements to connectivity with Bluetooth mobile phones.
Also the SyncServices framework (which iSync uses) has been updated from v3.1 to v3.2, which again may bring improvements to general syncing in Mac OS X.

Apple today released the Mac OS X 10.4.10 update:
To answer the inevitable question, there are no
updates to iSync in this release. iSync remains at
v2.4 and no support for any new phones has been added.
Ok, fair enough.
However, I was looking in vain for an email address to contact Apple directly for a request to cover the phone I have. No matter where I looked, I kept being offered the discussion groups or a way to start a repair.
G4 500 MHz (work) & iMac 24" (home)

ISync 2.2 and Mac OS X 10.4.6 Update released: READ THIS before installing

Apple has released iSync 2.2 as part of the Mac OS X 10.4.6 Update package, and it has serious ramifications for current or first-time users of iSync. READ this information below before you perform the installation. This information is extracted from Technical Information Library article 303419, found here:
http://docs.info.apple.com/article.html?artnum=303419
iSync 2.2: Read before updating to Mac OS X 10.4.6 or later, or before first sync
iSync 2.2, included with the Mac OS X 10.4.6 Update, works with many phones. However, if you have an existing phone that you sync with iSync in Mac OS X 10.4 through 10.4.5, there are some important steps you should follow before you update to Mac OS X 10.4.6 or later, as well as after you update.
Before you update to Mac OS X 10.4.6 or later
1. Make sure that all of the contact and calendar data that you want to sync is on your computer.
2. Perform a sync with your devices before upgrading to Mac OS X 10.4.6 to make sure the information on your computer is up to date, and to resolve any conflicts between your devices and computer.
3. If you have modified iSync or installed third-party software to support your specific model of phone, or if if iSync 2.2 specifically adds support for your specific model of phone, you should consider removing your phone from iSync, undoing these changes and uninstalling that software before upgrading. Your phone will not work with iSync after applying the Mac OS X 10.4.6 Software Update and your third party software will need to be updated.
Note: Reudo's Sync for Mac is not affected and does not need to be uninstalled prior to updating.
If you skip these steps, you will see this message after upgrading: "Plug-in for this phone model is missing. Install that phone's plug-in if you want iSync to support it."
4. Make sure that your phone is configured to use its memory to store contacts instead of a SIM card. The steps on how to do this vary from phone to phone—consult your device's documentation for how to check its configuration, and if necessary how to change your phone to store contacts in its memory.
5. Make sure your phone has the correct date and time set.
6. Make sure that you have a current backup of your Address Book and iCal data.
Refer to the article for additional instructions and an illustrated example of the steps to perform before installing the update.

as the jump to intel progresses, so too will incompatibilities between PPC and intel mac. this will force us all to buy more apple.
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

ISync v3.0.2 released as part of Mac OS X 10.5.3 Update

In the *Mac OS X 10.5.3* Update released today, iSync has been updated from v3.0 (568.0) to v3.0.2 (574.0).
No support for any new devices has been added. It's now 7 months since Apple last added any new devices to iSync.
There are no obvious changes in iSync 3.0.2 and nothing mentioned in the Mac OS X 10.5.3 release notes.
If anyone notices anything new, improved or updated, please post here...

The crashes you're experiencing could be caused by any number of different things, but one thing to check is whether you are using a Proxy server to connect to the internet. (Check in System Preferences -> Network -> Advanced). Some companies and many universities and libraries use proxy servers (automatic proxy.pac files) to let you access premium content from off-site. The OS 10.5.3 combo update seems to have introduced a compatibility bug that leads to crashes with proxy servers.
From your description, I can't tell whether this is what you're experiencing, but it may be related. So if you are using a proxy server, turn it off in System Preferences and try without.
If this indeed turns out to be the problem and you need to use a proxy server for work/research, then you should try Firefox (new version: Firefox 3 was just released last week) instead of Safari, and install one of the proxy extensions (e.g. FoxyProxy or SwitchProxy). Firefox handles proxies inside the browser (as opposed to the system-wide level, which is what Safari is doing). That allows you to switch your proxy server on and off. I've been using it with my proxy server and it's very stable. With FoxyProxy, you can even define site-specific browser behavior.

I bought the wrong update, I need a Mac-Version but ordered a Windows-Version. What can I do?

I bought the wrong update, I need a Mac-Version but ordered a Windows-Version. What can I do?

Since this is a user to user help forum, not Adobe support or sales, nobody here will be able to help... you must talk directly to Adobe
Information for anyone else with a similar problem
Adobe contact information - http://helpx.adobe.com/contact.html
Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

10.4.8 - Six different Macs all with problems since the update...

We run a business which has six different Macs... all relatively new (3 yrs). Typically we run the auto updates, because that's what we're supposed to do, and we experience little if any problems.
This last update (10.4.8) has caused nothing but problems - little system hickups here and there. Programs hang. Strange screen anomolies. Laptop trackpad issues (clicks and selections when none were made). I have to say that if Apple is going the way of the Windows machine I'm not impressed - at all. Consider thoroughly test your updates before releasing them on your loyal client base. Seems like a simple concept.
Is there anything that can be done to limit the impact of the recent update. Backtracking to the last version is not an option, although setting up the system to allow for this will become a part of our workflow in the immediate future.
C Jones
dual 2.0 G5's, 4.5 GB memory, ATI x800 Graphics card Mac OS X (10.4.8)
dual 2.0 G5's, 4.5 GB memory, ATI x800 Graphics card Mac OS X (10.4.3)

Started having problems with my Imac first power supply (replaced under warranty), then HD/Boot issue. I ran disk repair and was advised by support to try to do an immediate backup (purchase external HD) and reinstall OS from CDs. Although I purchased an external firewire HD that day, my HD failed the next day (unable to backup onto new Glyph in time) so I lost EVERYTHING.
I investigated data recovery options, but just waaay too expensive. So yes, there's nothing like a good backup plan. Lesson learned.
Today (after a nightmarish struggle to get the computer repaired--different issue) I finally got my computer back with a new HD and logic board.
So, I rushed home to start reinstalling OS and software. First installed original OS X Panther disks which incl Garageband, no problems (also set up internet to try to register all software), checked for firmware update (none), ran software updates, rebooted). Then I installed OSX Tiger (ran software update...10.4.8, etc, ), started Garageband new song one track piano (using an M-audio keyboard controller i had hooked up but had not yet installed the software drivers) and it worked! Very cool. everything was time-consuming but seemed to be working fine (and why wouldn't it on a brand new HD with all software installed via CD and all updates recommended by Apple?)
Then, I decided I would next install the GarageBand JamPack CD (before attempting to tackle external HD setup, Pro Tools, synths, etc). So, I saved the "testsong" when closing and received error "Gband unexpectedly quit" and it stopped responding (spinning color wheel). After a few minutes I was able to force quit the application (really didn't think anything of it). Then I rebooted (since it did crash, I did go back and look for a possible software update but said I was up to date).
I tried to install Gband Jam Pack (1) failed about 95% of the way through while I was trying to complete product registration online. Then I rebooted, tried again failed (during which my internet also stopped responding). I had to then reset the wireless router and cable modem, looked for help online and rebooted.
I then ran repair disk permissions (it looked like it did a few updates but I did not see any alarming "errors" flash across the screen). I rebooted and tried to install JamPack again, failed, and rebooted (and looked online for another suggestion).
removed folder: application support/gband/loops/Gband Jampack/ folder into trash then tried to install jampack again, failed, and rebooted.
removed folder again, ran repair disk utility (did not look like it made any updates or report any errors), rebooted. Tried to install again and failed and rebooted, emptied trash and rebooted again.
I am now running repair disk utility one more time (10 solid hours into the software installation process ....my internet just stopped responding again so I apparently have to reset the wireless router again just before trying to send this message). I will run repair one more time, and completely power off computer for a couple of hours while I grab some sleep before work.
But, now I am seeing all these SCARY stories about the 10.4.8 update I just installed?!.
Are these problems related? Can someone please help me? Surely it cannot be this difficult. Thank you!
Imac G5 1.8 1.25 GB RAM Mac OS X (10.4.8)

I am trying to update CS5 on my Mac and I keep getting an error message

I am trying to update CS5 on my Mac and it continues to say: " There was an error downloading this update. Please quit and try again later." I have restarted my computer a few times and tried downloading again yet have continued to get the same response. Can anyone help? Here are the updates that are problematic:
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Premiere Pro CS5 v5.0.4
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Mac not working right after software update. Please Help...

I turned on my computer today and first thing I was asked when I logged in was if I wanted to update my software because there is new updates available. So I click on update so my computer will stay up to date......Well big mistake Now I cant open my itunes, my safari, my quicktime player, or even my Microsoft word, everything is messed up I keep getting "program quit unexpectedly" from everything. I have been trying everything today to get my computer back to normal, but no luck. I have read something about "permissions not being compatible". I have no idea Im clueless I know nothing about computers. Please Help! I made a big OOOOOOps

It finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

Hi,
I scoured the web looking everywhere for a solution to this.
Exit Code 15
OSX 8.5 with Work@Home DVD media for CS6
I followed instructions to run 3rd party cleaner software
I tried the adobe removal tool
removing all copies of adobe software manually
installing from a new account, safe mode, plist everything suggested that i found did not work.
A colleague suggested that removing the below folder would allow the installation:
/Library/Application Supports/Adobe
They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
Cheers,
Smokey

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

HELPPP ME BEFORE CHRISTMASS MORNING!!

Cant update apps. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it. i can download apps,music with present mac note book but not apps. how can i update apps on my mac and iphone 4?

cant update apps on my mac or iphone4. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it . i can download apps and music. how can i update apps on my mac and iphone 4?

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

No updates to iSync in Mac OS X 10.4.10 update

Similar Messages

Maybe you are looking for