No Updates to iSync in Mac OS X 10.5.7

Apple have just released Mac OS X 10.5.7 but there are no updates to iSync included. It remains at v3.0.2 (574.0)
Virtually all the Bluetooth system software components have been significantly updated from v2.1.3f8 to 2.1.6f8, which could bring improvements to connectivity with Bluetooth mobile phones.
Also the SyncServices framework (which iSync uses) has been updated from v3.1 to v3.2, which again may bring improvements to general syncing in Mac OS X.

Apple today released the Mac OS X 10.4.10 update:
To answer the inevitable question, there are no
updates to iSync in this release. iSync remains at
v2.4 and no support for any new phones has been added.
Ok, fair enough.
However, I was looking in vain for an email address to contact Apple directly for a request to cover the phone I have. No matter where I looked, I kept being offered the discussion groups or a way to start a repair.
G4 500 MHz (work) & iMac 24" (home)    

Similar Messages

  • No updates to iSync in Mac OS X 10.4.10 update

    Apple today released the Mac OS X 10.4.10 update:
    Mac OS X 10.4.10 Update (PPC) - 25MB
    Mac OS X 10.4.10 Combo Update (PPC) - 165MB
    Mac OS X 10.4.10 Update (Intel) - 72MB
    Mac OS X 10.4.10 Combo Update (Intel) - 293MB
    To answer the inevitable question, there are no updates to iSync in this release. iSync remains at v2.4 and no support for any new phones has been added.

    Apple today released the Mac OS X 10.4.10 update:
    To answer the inevitable question, there are no
    updates to iSync in this release. iSync remains at
    v2.4 and no support for any new phones has been added.
    Ok, fair enough.
    However, I was looking in vain for an email address to contact Apple directly for a request to cover the phone I have. No matter where I looked, I kept being offered the discussion groups or a way to start a repair.
    G4 500 MHz (work) & iMac 24" (home)    

  • I bought the wrong update, I need a Mac-Version but ordered a Windows-Version. What can I do?

    I bought the wrong update, I need a Mac-Version but ordered a Windows-Version. What can I do?

    Since this is a user to user help forum, not Adobe support or sales, nobody here will be able to help... you must talk directly to Adobe
    Information for anyone else with a similar problem
    Adobe contact information - http://helpx.adobe.com/contact.html
    Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
    Next link has a "Chat Now" button near the bottom http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version?

    As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version 5.7?
    Thanks for any help you can provide.

    LR on your laptop is still a desktop version.  It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
    I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time.  Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

  • I am trying to update CS5 on my Mac and I keep getting an error message

    I am trying to update CS5 on my Mac and it continues to say: "  There was an error downloading this update. Please quit and try again later." I have restarted my computer a few times and tried downloading again yet have continued to get the same response. Can anyone help? Here are the updates that are problematic:
      Adobe After Effects CS5 10.0.2 Update
      There was an error downloading this update. Please quit and try again later.
      Adobe Bridge CS5 4.0.5 Update
      There was an error downloading this update. Please quit and try again later.
      Adobe Extension Manager CS5 5.0 Update
      There was an error downloading this update. Please quit and try again later.
      Adobe Illustrator CS5 15.0.2 Update
      There was an error downloading this update. Please quit and try again later.
      Adobe Pixel Bender Toolkit 2.5 Update
      There was an error downloading this update. Please quit and try again later.
      Adobe Premiere Pro CS5 v5.0.4
      There was an error downloading this update. Please quit and try again later.
      Adobe® InDesign® CS5 7.0.4 update
      There was an error downloading this update. Please quit and try again later.
      Dreamweaver CS5 11.0.4 Updater
      There was an error downloading this update. Please quit and try again later.
      Fireworks CS5 11.0.2 Update
      There was an error downloading this update. Please quit and try again later.
      Photoshop 12.0.4 update for Photoshop CS5
      There was an error downloading this update. Please quit and try again later.
      Photoshop Camera Raw 6.7 Update
      There was an error downloading this update. Please quit and try again later.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

    I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

    You need to install Office on the computer from the installer DVD or disc image you purchased.

  • My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • Cant update apps. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it. i can download apps,music with present mac note book but not apps. how can i update apps on my mac and iphone 4?

    cant update apps on my mac or iphone4. asks for password for another account i had on a dell notebook. either i forgot the pass word or its not taking it  . i can download apps and music.  how can i update apps on my mac and iphone 4?

    I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
    Before you restore or reset, I would try that first.

  • How to ensure a smooth update and smooth running mac

    Hello all. First off this is not a 'help' or 'query' post, thanks to everyone in this Discussion who has helped me in the past for various mac problems, thought I "give back" and post some good tips and usage on "ensuring a smooth update and smooth running mac" in the long run.
    Altogether I have 3 Macs at home to "maintain" (my iMac G5, MacBook and my sis's Mac mini Intel) and in the office my own G5 Tower and 2-3 other same G5s. So far I have "dare to say" (touchwood ) I have not run into any major problems while performing any major OS or Security Updates; I know some of these steps are mentioned and even "preach" many times, but by doing them, you avoid all the inconvenience in the long run:
    Always Backup:
    1. Whatever you do, invest in a 2nd hard drive and perform regular back ups!
    2. If you have a G5 Tower or Mac Pro, get a 2nd drive or 3rd and install internally, if you have the other Macs, get an external FireWire Hard Drive.
    3. Use SuperDuper, and pay the little shareware to get the additional automatic and scheduling functions to help you perform auto backups, or if you prefer doing the backup manually
    4. For home users, I would recommend you perform a Backup once every 2 weeks. Heavy office/work use, I say once a week
    Performing Updates:
    1. Before Starting Up, unplug all external devices like FW drives, USB hubs etc, leave only your wired keyboard, mouse and internet connection (unless they are all wireless)
    2. Start Up your mac, quit all running applications and Repair Disk Permission
    3. Restart again and Repair Permission again
    4. Quit all other running apps and also turn off Norton Anti-virus, run Software Update
    5. Whether or not you have the Restart option after the update, Restart your mac
    6. Repair Disk Permission
    7. Shut down the mac, fix all the external devices etc
    8. Start up your mac, Repair Permission again
    9. Use your Mac as usual
    I have been doing these since all the 10.4 updates and I have not encounter any problems with all my macs.
    When a Kernel Panic occurs:
    1. Restart the mac and boot into Single User Mode (fsck)
    2. Run fsck and Repair the mac
    3. Reboot the mac, Repair Permission
    Regular Maintenance:
    1. Get a Maintenance Utility like Cocktail, and pay for the shareware and schedule regular maintenance cycles.
    2. The Mac OS also has a "built-in" maintenance script that runs in the wee hours (local time), so it is actually encourage that you at least leave your mac on overnight for at least one or two nights in the week.
    If you do not wish your mac to be left on till the morning, you can always schedule in Energy Saver's Schedule options for the mac to turn on and off at your designated times.
    I always leave my office mac on till about 4-5 am in the morning and I set things like Cocktail and NAV scans to run in those hours so they won't disrupt your day time operations, I do the same to my own home iMac.
    These tips and pointers are not new and have been mentioned many times in these posts, but if you just take that extra little time to follow through, you will be ensure a better and healtheir running mac.
    Cheers

    You can enter your Mac's serial number at this site. Information, based on the serial number, will be shown. http://www.chipmunk.nl/klantenservice/applemodel.html Then tell us what model PB you have.
    Usually, you get a blinking ? when no OS is installed. The startup tone (bong) you heard indicates the PB passed the startup hardware test.
     Cheers, Tom

  • HI,  I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.

    HI,  I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.

    What are you missing?
    I inherited this app and signing the third party jars is how it was setup, I was wondering the same thing too, why was it necessary to sign the third party jars?
    The applet runs in either JRE 1.6.0_13 or JRE 1.6.0_27 depending on the other Java apps the user uses. JRE 1.6.0_13 does not have the mixed code security (so it is like is disable), but JRE 1.6.0_27 does have the mixed code security and the applet will not launch with mixed code security enable, so we have to disable it. With all the hacking going on in the last two years, is important to improve security; so this is a must.
    Yes, I always clear up the cache.
    Any idea on how to resolve this problem?

  • I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

    I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

    Hi Ryan,
    I managed to find this reference specifically for restoring on Snow Leopard:
    If you are using Mac OS X Snow Leopard, start your computer from the installation disc. Then use the "Restore From Time Machine Backup" utility.
    Now that was copied from this more comprehensive reference:
    Mac Basics: Time Machine backs up your Mac
    You may also find this article helpful:
    http://pondini.org/TM/14.html
    Finally, I cannot see why Time Machine would leave out your playlists and ratings? Think about it. Why would Time Machine specifically copy everything BUT your playlists and ratings? Ryan, what are your options? I would have to ask you this: Are you certain that you properly did the sync? That is another/different forum altogether: Using iPhone /see subsection on Syncing.
    Either way...
    Best Regards,
    mm
    EDIT: For whatever reason I tried three times to edit out one of the redundent adjectives... either different or another which preceeds the word forum, but the advanced editor would (apparently NOT allow me to do so). I hope that it doesn't render without any adjective before the word forum.

  • HT5130 Unable to  install Security Update 2012-001 for Mac OS 10.6.8

    Have just tried to install Security Update 2012-001 for Mac OS 10.6.8 and get message saying cannot download. Download stalls at Zero kB downloaded. Dialog says an error occurred during download.
    Internet connection is fine and first time denial has occurred.

    Looking at all the posts about the deficiencies of this update, you may have just lucked out, especially if you are, like many of us, still running PowerPC programs under Rosetta.

  • Updated Adobe Cloud and Mac Os but Bridge doesn't open.

    Updated Adobe Cloud and Mac Os but Bridge doesn't open.
    Appear the following report: Adobe Bridge cannot be opened because of a problem.
    Problem details:
    Process:         Adobe Bridge CC [302]
    Path:            /Applications/Adobe Bridge CC/Adobe Bridge CC.app/Contents/MacOS/Adobe Bridge CC
    Identifier:      com.adobe.bridge6
    Version:         ??? (???)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [172]
    Date/Time:       2014-08-05 10:50:04.647 -0300
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          314018 sec
    Crashes Since Last Report:           17
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      AE68F420-CF3E-4774-AEA3-AF602B022735
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /usr/lib/libcurl.4.dylib
      Referenced from: /Applications/Adobe Bridge CC/Adobe Bridge CC.app/Contents/MacOS/../Frameworks/dvanet.framework/Versions/A/dvanet
      Reason: Incompatible library version: dvanet requires version 7.0.0 or later, but libcurl.4.dylib provides version 6.0.0
    Binary Images:
        0x7fff5fc00000 -     0x7fff5fc3bdef  dyld 132.1 (???) <69130DA3-7CB3-54C8-ABC5-423DECDD2AF7> /usr/lib/dyld
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 4 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.6
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD1001FALS-40U9B0, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfa140000 / 5
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfa142000 / 7
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa120000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0xfa111000 / 6
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Hub, 0x058f  (Alcor Micro, Corp.), 0x6254, 0xfd140000 / 5
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0xfd110000 / 3

    I have followed the other discussions and done the suggested updates or deletes and to no avail.
    Unless you tell us exactly what you have tried, we have no way of knowing exactly which updates or deletes? aren't working for you.
    Try installing the combo >  Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after the combo is installed, try the App Store.

  • Since downloading Security Update 2012, Word for Mac no longer able to save or save as documents;  program freezes after clicking save

    Since downloading Security Update 2012, Word for Mac 2004 is no longer able to Save or Save As documents.  After clicking Save or Save As, the program ceases to respond and must be Force Quit.  Any tips on making Word functional again?

    There was a second Security Update (v1.1).  Did you download that one.  It was supposed to have fixed the problems created by the prior update.  At least is solved my problems with Quicken 2007 for Mac and AppleWorks 6.

  • I can't open iTunes after just recently updating it on my mac mini. Instead a msg appears: "This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes.  Will I lose my library?

    I can't open iTunes after just recently updating it on my mac mini. Instead a msg appears: "This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes.  Will I lose my library

    I do not know if iTunes is in your computer at all
    icon in the applications folder = application .
    Download iTunes :
    * http://www.apple.com/itunes/download/

Maybe you are looking for