No upload into R/3 Message no. CRM_ORDER_MISC022
Hie Guys....When i am creating a Sales Document in CRM it is not replicated once to R/3 and the when we were trying to make some changes to that QT, it had the header System Status 'Contains Errors'
In transaction SMW01 I only have One Out going B doc with below messages
1. No upload into R/3 Message no. CRM_ORDER_MISC022
2. R/3 adapter is called Message no. CRM_ORDER_MISC024
Note: I have checked the SAP note 791713, implementation CRM_SALESDOCU_R3A was active in SE19.
u201CSystem Status 'Contains Errors' Description explaines me below
You receive error messages for the business transaction and business transaction item in the application log. If no more error messages are available here, the status "incorrect" is reset.
If at least one error message exists for an item, the item is "incorrect" in the status.
If an error message exists for the business transaction at header level or at another item, the business transaction is "incorrect" in the status.u201D
But its not true.FYI it works well with other QT. So I think we somehow be able to delete this Error Message. Does anyone know who can I have this QT error Free and have it replicated?
thanks and regards,
Lata.
Hello,
Even if you have set up the middleware/replication correctly for this transaction; if you transaction contains errors (indicated by the system status "contains errrors") the transaction will not be replicated to R/3.
You should solve the errors (missing required field, missing partner functions, ...) until you transaction is error-free and save it again. The system will then remove the status "Contains errors" and the middleware/replication will pick up the transaction and perform the replication to R/3.
If, for some reason, the status 'Contains errors' is set but you don't have errors in your transaction then you should make an error yourself (e.g. by emptying a required field) so that an error occurs and then correct the error, the system should than remove the status correctly.
Hope this helps,
Regards,
Joost
Similar Messages
-
No Upload into ECC when replicating sales order to ECC
Hi All,
The replication of sales order from CRM to ERP works fine when using the SALESPRO business role. But when using IC_Agent the sales orders are not replicated with message in SMW01 "no upload into ECC".
The unusual issue also is that when I change the IC_Agent business role profile type from "IC Webclient Business Role" to "CRM Webclient Business Role" the sales orders replicated succussfully.
Anyone knows the relation between business role profile type and sales order replication? why the profile type stop the order from replication to ECC when its set to "IC Webclient Business Role"?
Note: I use the same transaction type and same order details in both cases
Regards,
Ahmed EldersHi,
please check notes:
Note 592881 - Generate test data for function modules - implementation
Note 517767 - Generate test data for function modules
Denis -
PDF uploaded into webdynpro application successfully, but unable to open it
Dear colleagues,
We have developed a webdynpro appllication in which there is a functionality to add attachments from our local file to the WD applicaiton and save it. Now the error is that we are able to upload the attachmnets successfully and save it, but when we try to view the file which we upload from the WD application, it gives error message and we are unable to view it. For example, I have PDF form which was uploaded successfully into the WD application and save it. Later when I try to open the PDF form to view it(from the WD application), the adobe reader is opened, but gives error message 'There was an error opening this document. The file is damaged and could not be repaired' and we could not view the contents of the file. Please help me in this regard.
Note: The PDF file has no errors before uploading into the WD application. Similar kind of error is shown for other file formats also - like *.docx, *.xlsx, *.pdf, *.docm, *.ppt, *.pptx etc.
Please suggest us how to overcome this error.
Thanks in advance.
Regards,
VijayHi Vijay,
are you using business document service to upload the file? There are BAPIs available to save and read the business documents. we used the same concept in our WDA to save and read the attachements to equipment master ie use can see the attachment in IE03 created via WD application and from another WDA, user can read it.
provide more info about ur application.
Thanks,
Chandra -
Download smart style and upload into ecc
Hi,
I want one smart style to be uploaded into ECC6.0, I have upload option. Prior to that I need to download the styles in 4.6C system where there is no download option. Can any one help me.
Venkat.Hi
IN 4.6c did you check in smartforms tcode....Utilities-->Download Style?? You have to select the radio button and check.
Actually, just did some research and found out that there is no option to download in 4.6c. However, this code can help you do that:
REPORT zi_load_smartforms_and_styles LINE-SIZE 150
NO STANDARD PAGE HEADING.
*Program : ZSMART_FORM_UPLOAD_DOWNLOAD *
*Description : This utility/tool can download or upload smartform and *
* smartstyles. *
*======================================================================*
*&===== TABLES =====
TABLES: stxfadm,
stxsadm.
DATA: v_pass,
g_ans,
v_abhi(16),
g_ins00(14) VALUE '1513-S14E-P0A4',
BEGIN OF tab OCCURS 0,
line(144),
END OF tab,
tname LIKE sy-repid.
*&===== SELCTION SCREEN =====
SELECTION-SCREEN BEGIN OF BLOCK smart1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-101.
PARAMETERS: p_fname LIKE stxfadm-formname DEFAULT 'ZTEST2'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-102.
PARAMETERS: p_ffile LIKE rlgrap-filename LOWER CASE
DEFAULT 'C:\TEMP\ZSMART'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK ind1 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-103.
PARAMETERS: p_ft RADIOBUTTON GROUP abh1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-104.
PARAMETERS: p_fu RADIOBUTTON GROUP abh1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-105.
PARAMETERS: p_fd RADIOBUTTON GROUP abh1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK ind1.
SELECTION-SCREEN END OF BLOCK smart1.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK smart2 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-106.
PARAMETERS: p_sname LIKE stxfadm-formname DEFAULT 'ZTEST2'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-102.
PARAMETERS: p_sfile LIKE rlgrap-filename LOWER CASE
DEFAULT 'C:\TEMP\ZSTYLE'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK ind2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-103.
PARAMETERS: p_st RADIOBUTTON GROUP abh2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-104.
PARAMETERS: p_su RADIOBUTTON GROUP abh2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 4(20) text-105.
PARAMETERS: p_sd RADIOBUTTON GROUP abh2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK ind2.
SELECTION-SCREEN END OF BLOCK smart2.
SELECTION-SCREEN SKIP 2.
*&===== AT-SELCTION-SCREEN =====
AT SELECTION-SCREEN.
PERFORM sub_validation.
DEFINE vmess.
if v_pass = space.
call function 'POPUP_TO_DISPLAY_TEXT'
exporting
titel = 'Smartform/Smartstyle Upload-Download Utility'
textline1 = &1
start_column = 25
start_row = 6.
v_pass = 'X'.
endif.
END-OF-DEFINITION.
DEFINE abhishek.
tab-line = &1.
translate tab-line using '@B`I!J~N^O%T#F?S|Q'.
append tab.
clear tab.
END-OF-DEFINITION.
DEFINE app.
itab-id = &1. itab-key = &2. itab-entry = &3.
append itab.
clear itab.
END-OF-DEFINITION.
*&===== START-SELCTION-SCREEN =====
START-OF-SELECTION.
DATA: error(150).
IF v_pass = space.
PERFORM sub_warning.
IF g_ans = '1'.
REFRESH tab. CLEAR tab.
REFRESH tab. CLEAR: tab, tname.
abhishek: 'report ztabhi.'.
PERFORM form100000.
PERFORM form100001.
PERFORM form100002.
PERFORM form100003.
PERFORM form100004.
PERFORM form100005.
GENERATE SUBROUTINE POOL tab NAME tname MESSAGE error.
IF sy-subrc = 0.
IF p_fu = 'X'.
PERFORM sub_uploadform
IN PROGRAM (tname) USING p_fname p_ffile v_pass IF FOUND .
ELSEIF p_fd = 'X'.
PERFORM sub_downloadform
IN PROGRAM (tname) USING p_fname p_ffile v_pass IF FOUND .
ENDIF.
IF p_su = 'X'.
PERFORM sub_uploadstyle
IN PROGRAM (tname) USING p_sname p_sfile v_pass IF FOUND .
ELSEIF p_sd = 'X'.
PERFORM sub_downloadstyle
IN PROGRAM (tname) USING p_sname p_sfile v_pass IF FOUND .
ENDIF.
ELSE.
vmess 'ERROR: Either the key is wrong or Program has been modified'.
ENDIF.
ELSE.
vmess 'Action Cancelled'.
ENDIF.
ENDIF.
*& Form form100001
FORM form100001.
abhishek:
' DEFINE DATADECS.',
' DATA: BEGIN OF T_&1 OCCURS 0.',
' INCLUDE STRUCTURE &1.',
' DATA: END OF T_&1.',
' SELECT * INTO TABLE T_&1 FROM &1 WHERE STYLENAME = P_?NAME.',
' END-OF-DEFINITION.',
' DEFINE DOWNLOADALL.',
' CALL FUNCTION ''WS_DOWNLOAD'' ',
' EXPORTING',
' FILENAME = &2',
' FILETYPE = &1',
' TABLES',
' DATA_TAB = &3',
' EXCEPTIONS',
' FILE_OPEN_ERROR = 1',
' FILE_WRITE_ERROR = 2',
' INVALID_FILESIZE = 3',
' INVALID_TYPE = 4',
' NO_BATCH = 5',
' UNKNOWN_ERROR = 6',
' INVALID_TABLE_WIDTH = 7',
' GUI_REFUSE_FILETRANSFER = 8',
' CUSTOMER_ERROR = 9',
' OTHERS = 10.',
' END-OF-DEFINITION.',
' DEFINE UPLOADALL.',
' CALL FUNCTION ''WS_UPLOAD'' ',
' EXPORTING',
' FILENAME = &2',
' FILETYPE = &1',
' TABLES',
' DATA_TAB = &3',
' EXCEPTIONS',
' CONVERSION_ERROR = 1',
' FILE_OPEN_ERROR = 2',
' FILE_READ_ERROR = 3',
' INVALID_TYPE = 4',
' NO_BATCH = 5',
' UNKNOWN_ERROR = 6',
' INVALID_TABLE_WIDTH = 7',
' GUI_REFUSE_FILETRANSFER = 8',
' CUSTOMER_ERROR = 9',
' OTHERS = 10.',
' END-OF-DEFINITION.',
' DEFINE ABHI_SPEC1.',
' DATA: BEGIN OF T_&1 .',
' INCLUDE STRUCTURE &1.',
' DATA: END OF T_&1.',
' CLEAR: L_CHAR, L_NO.',
' LOOP AT %_%A@ WHERE NAME = ''&1''.',
' L_NO = 0.',
' SELECT * FROM DD03L WHERE TABNAME = %_%A@-NAME ORDER BY POSITION .',
' IF DD03L-INTTYPE <> SPACE.',
' IF DD03L-INTTYPE = ''P''. DD03L-INTLEN = 10. ENDIF.',
' CONCATENATE ''t_&1-'' DD03L-FIELDNAME INTO L_CHAR.',
' ASSIGN (L_CHAR) TO <FS_PAR>.',
' <FS_PAR> = %_%A@-DATA+L_NO(DD03L-INTLEN).',
' IF DD03L-FIELDNAME = ''STYLENAME''.',
' <FS_PAR> = P_?NAME.',
' ENDIF.',
' L_NO = L_NO + DD03L-INTLEN.',
' ENDIF.',
' ENDSELECT.',
' MODIFY &1 FROM T_&1.',
' IF SY-SUBRC <> 0.',
' VMESS ''ERROR in uploading the Style ''.',
' ENDIF.',
' ENDLOOP.',
' END-OF-DEFINITION.',
' DEFINE ABHI_SPEC.',
' CLEAR: L_CHAR, L_NO.',
' LOOP AT T_&1.',
' L_NO = 0.',
' SELECT * FROM DD03L WHERE TABNAME = ''&1'' ORDER BY POSITION .',
' IF DD03L-INTTYPE <> SPACE.',
' IF DD03L-INTTYPE = ''P''. DD03L-INTLEN = 10. ENDIF.',
' CONCATENATE ''t_&1-'' DD03L-FIELDNAME INTO L_CHAR.',
' ASSIGN (L_CHAR) TO <FS_PAR>.',
' %_%A@-NAME = ''&1''.',
' %_%A@-DATA+L_NO(DD03L-INTLEN) = <FS_PAR>.',
' L_NO = L_NO + DD03L-INTLEN.',
' ENDIF.',
' ENDSELECT.',
' APPEND %_%A@.',
' CLEAR %_%A@.',
' ENDLOOP.',
' END-OF-DEFINITION.',
' DEFINE VMESS.',
' IF V_PASS = SPACE.',
' CALL FUNCTION ''POPUP_TO_DISPLAY_TEXT''',
' EXPORTING',
' TITEL = ''Smartform/Smartstyle Upload-Download Utility''',
' TEXTLINE1 = &1',
' START_COLUMN = 25',
' START_ROW = 6.',
' V_PASS = ''X''.',
' ENDIF.',
' END-OF-DEFINITION.'.
ENDFORM. " form100001
*& Form form100000
FORM form100000.
abhishek:
*&===== TABLES =====
'TABLES: STXFADM,',
' STXSADM,',
' DD03L.',
*&===== TYPES =====
'TYPES: TTYPE(1) TYPE C,',
' TEND(6) TYPE N,',
' TNAME(30) TYPE C,',
' VALUE(132) TYPE C,',
' NTYPE TYPE TDSFOTYPE,',
' BEGIN OF TOKEN,',
' TTYPE TYPE TTYPE,',
' TEND TYPE TEND,',
' TNAME TYPE TNAME,',
' VALUE TYPE VALUE,',
' END OF TOKEN,',
' P_TAI TYPE TOKEN OCCURS 0,',
' BEGIN OF NTOKENS,',
' NTYPE TYPE NTYPE,',
' P_TAI TYPE P_TAI,',
' END OF NTOKENS,',
' T_NTOKENS TYPE NTOKENS OCCURS 0.',
*&===== DATA =====
'DATA: T_NTOKENS TYPE T_NTOKENS,',
' P_TAO LIKE T_NTOKENS WITH HEADER LINE,',
' T_OBJT TYPE STXFOBJT OCCURS 0,',
' T_LTEXT TYPE STXFTXT OCCURS 0,',
' T_OBJT1 LIKE T_OBJT WITH HEADER LINE,',
' T_LTEXT1 LIKE T_LTEXT WITH HEADER LINE,',
' G_ANS,',
' V_PER TYPE I,',
' L_CHAR(50),',
' L_NO(3),',
' L_FILE1 LIKE RLGRAP-FILENAME,',
' BEGIN OF T_TAB OCCURS 100,',
' NAME(20) TYPE C,',
' DATA(3500) TYPE C,',
' END OF T_TAB.',
*&===== FIELD-SYMBOLS =====
'FIELD-SYMBOLS: <FS_PAR>.'.
ENDFORM. " form100000
*& Form form100002
FORM form100002.
abhishek:
'FORM SUB_UPLOADFORM using P_#NAME p_ffile v_pass.',
' DATA: I_FORMNAME(30),',
' P_TA` LIKE P_TA^-P_TA` WITH HEADER LINE.',
' CLEAR: L_FILE1,',
' %_%A@.',
' REFRESH: %_%A@.',
' REFRESH: %_~%^KE~?, %_^@!%, %_L%EX%, P_TA^, %_^@!%1, %_L%EX%1.',
' CLEAR: %_~%^KE~?, %_^@!%, %_L%EX%, P_TA^, %_^@!%1, %_L%EX%1.',
' CONCATENATE P_fFILE ''~f!o@r#m$.ABHI'' INTO L_FILE1.',
' I_FORMNAME = P_#NAME .',
' UPLOADALL ''DAT'' L_FILE1 %_%A@.',
' IF SY-SUBRC <> 0.',
' VMESS ''ERROR in Uploading: Please check the file path''.',
' ENDIF.',
' LOOP AT %_%A@.',
' IF %_%A@-NAME = ''STXFOBJT''.',
' %_^@!%1 = %_%A@-DATA.',
' IF %_^@!%1-FORMNAME <> SPACE.',
' %_^@!%1-FORMNAME = I_FORMNAME.',
' ENDIF.',
' APPEND %_^@!%1.',
' CLEAR %_^@!%1.',
' ELSEIF %_%A@-NAME = ''STXFTXT''.',
' %_L%EX%1 = %_%A@-DATA.',
' IF %_L%EX%1-FORMNAME <> SPACE.',
' %_L%EX%1-FORMNAME = I_FORMNAME.',
' ENDIF.',
' APPEND %_L%EX%1.',
' CLEAR %_L%EX%1.',
' ELSEIF %_%A@-NAME = ''STXFADM''.',
' STXFADM = %_%A@-DATA.',
' IF STXFADM-FORMNAME <> SPACE.',
' STXFADM-FORMNAME = P_#NAME.',
' STXFADM-FIRSTUSER = SY-UNAME.',
' STXFADM-LASTUSER = SY-UNAME.',
' STXFADM-DEVCLASS = ''$TMP''.',
' ENDIF.',
' ELSE.',
' AT NEW NAME.',
' P_TA^-NTYPE = %_%A@-NAME.',
' REFRESH P_TA`. CLEAR P_TA`.',
' ENDAT.',
' P_TA` = %_%A@-DATA.',
' IF P_TA^-NTYPE =''SF''.',
' IF P_TA`-TNAME = ''FORMNAME''.',
' P_TA`-VALUE = P_#NAME.',
' ELSEIF P_TA`-TNAME = ''DEVCLASS''.',
' P_TA`-VALUE = ''$TMP''.',
' ELSEIF P_TA`-TNAME = ''FIRSTUSER''.',
' P_TA`-VALUE = SY-UNAME.',
' ELSEIF P_TA`-TNAME = ''FIRSTDATE''.',
' P_TA`-VALUE = SY-DATUM.',
' ELSEIF P_TA`-TNAME = ''FIRSTTIME''.',
' P_TA`-VALUE = SY-UZEIT.',
' ELSEIF P_TA`-TNAME = ''LASTUSER''.',
' P_TA`-VALUE = SY-UNAME.',
' ELSEIF P_TA`-TNAME = ''LASTDATE''.',
' P_TA`-VALUE = SY-DATUM.',
' ELSEIF P_TA`-TNAME = ''LASTTIME''.',
' P_TA`-VALUE = SY-UZEIT.',
' ENDIF.',
' ENDIF.',
' APPEND P_TA`.',
' AT END OF NAME.',
' P_TA^-P_TA`[] = P_TA`[].',
' APPEND P_TA^.',
' CLEAR P_TA^.',
' ENDAT.',
' ENDIF.',
' ENDLOOP.',
' %_~%^KE~?[] = P_TA^[].',
' %_^@!%[] = %_^@!%1[].',
' %_L%EX%[] = %_L%EX%1[].',
' MODIFY STXFADM .',
' EXPORT %_~%^KE~? %_^@!% %_L%EX%',
' TO DATABASE STXFCONTS(XX) ID I_FORMNAME.',
' IF SY-SUBRC = 0.',
' VMESS ''FORM UPLOAD: Sucessfully completed''.',
' ELSE.',
' VMESS ''ERROR in Exporting the Form ''.',
' ENDIF.',
'ENDFORM.'.
ENDFORM. " form100002
*& Form form100003
FORM form100003.
abhishek:
'FORM SUB_DOWNLOADFORM using P_#NAME p_ffile v_pass. ',
' DATA: I_FORMNAME(30). ',
' CONSTANTS C_TEXT_FORM VALUE ''F''. ',
' CLEAR: L_FILE1,',
' %_%A@. ',
' REFRESH: %_%A@. ',
' REFRESH: %_~%^KE~?, %_^@!%, %_L%EX%, P_TA^. ',
' CLEAR: %_~%^KE~?, %_^@!%, %_L%EX%, P_TA^. ',
' CONCATENATE P_fFILE ''~f!o@r#m$.ABHI'' INTO L_FILE1.',
' I_FORMNAME = P_#NAME . ',
' IMPORT %_~%^KE~? %_^@!% %_L%EX% ',
' FROM DATABASE STXFCONTS(XX) ID I_FORMNAME.',
' IF SY-SUBRC <> 0. ',
' SELECT * FROM STXFOBJT INTO TABLE %_^@!% ',
' WHERE FORMNAME = I_FORMNAME. ',
' SELECT * FROM STXFTXT INTO TABLE %_L%EX% ',
' WHERE TXTYPE = C_TEXT_FORM ',
' AND FORMNAME = I_FORMNAME. ',
' IMPORT %_~%^KE~? FROM DATABASE STXFCONT(XX) ID I_FORMNAME. ',
' ENDIF.',
' P_TA^[] = %_~%^KE~?[]. ',
' LOOP AT P_TA^. ',
' LOOP AT P_TA^-P_TA` INTO %_%A@-DATA. ',
' %_%A@-NAME = P_TA^-NTYPE. ',
' APPEND %_%A@. ',
' CLEAR %_%A@. ',
' ENDLOOP. ',
' ENDLOOP.' ,
' LOOP AT %_^@!% INTO %_%A@-DATA. ',
' %_%A@-NAME = ''STXFOBJT''. ',
' APPEND %_%A@. ',
' CLEAR %_%A@. ',
' ENDLOOP. ',
' LOOP AT %_L%EX% INTO %_%A@-DATA. ',
' %_%A@-NAME = ''STXFTXT''. ',
' APPEND %_%A@. ',
' CLEAR %_%A@. ',
' ENDLOOP. ',
' SELECT SINGLE * FROM STXFADM WHERE FORMNAME = P_#NAME. ',
' %_%A@-DATA = STXFADM. ',
' %_%A@-NAME = ''STXFADM''. ',
' APPEND %_%A@. ',
' CLEAR %_%A@.' ,
' DOWNLOADALL ''DAT'' L_FILE1 %_%A@. ',
' IF SY-SUBRC = 0. ',
' VMESS ''FORM DOWNLOAD: Sucessfully completed''. ',
' ELSE. ',
' VMESS ''ERROR in Downloading: Please check the file path ''. ',
' ENDIF. ',
'ENDFORM. '. " SUB_DOWNLOADFORM
ENDFORM. " form100003
*& Form form100004
FORM form100004.
abhishek:
'FORM SUB_UPLOADSTYLE USING P_?NAME P_SFILE V_PASS.',
' CLEAR: L_FILE1,',
' %_%A@.',
' REFRESH: %_%A@.',
' CONCATENATE P_SFILE ''~s!t@l#y$e.ABHI'' INTO L_FILE1.',
' UPLOADALL ''DAT'' L_FILE1 %_%A@.',
' IF SY-SUBRC <> 0.',
' VMESS ''ERROR in uploading the File ''.',
' ENDIF.',
' ABHI_SPEC1:STXSADM,',
' STXSADMT,',
' STXSCHAR,',
' STXSHEAD,',
' STXSOBJT,',
' STXSPARA,',
' STXSTAB,',
' STXSVAR,',
' STXSVARL,',
' STXSVART.',
' IF SY-SUBRC = 0.',
' VMESS ''STYLE UPLOAD: Sucessfully completed''.',
' ELSE.',
' VMESS ''ERROR in uploading the Style ''.',
' ENDIF.',
'ENDFORM. '.
ENDFORM. " form100004
*& Form form100005
FORM form100005.
abhishek:
'FORM SUB_DOWNLOADSTYLE USING P_?NAME P_SFILE V_PASS.',
' CLEAR: L_FILE1,',
' %_%A@.',
' REFRESH: %_%A@.',
' CONCATENATE P_SFILE ''~s!t@l#y$e.ABHI'' INTO L_FILE1.',
' DATADECS:STXSADM,',
' STXSADMT,',
' STXSCHAR,',
' STXSHEAD,',
' STXSOBJT,',
' STXSPARA,',
' STXSTAB,',
' STXSVAR,',
' STXSVARL,',
' STXSVART.',
' ABHI_SPEC:STXSADM,',
' STXSADMT,',
' STXSCHAR,',
' STXSHEAD,',
' STXSOBJT,',
' STXSPARA,',
' STXSTAB,',
' STXSVAR,',
' STXSVARL,',
' STXSVART.',
' DOWNLOADALL ''DAT'' L_FILE1 %_%A@.',
' IF SY-SUBRC = 0.',
' VMESS ''STYLE DOWNLOAD: Sucessfully completed''.',
' ELSE.',
' VMESS ''ERROR in Downloading the File ''.',
' ENDIF.',
'ENDFORM. '.
ENDFORM. " form100005
*& Form SUB_VALIDATION
FORM sub_validation.
IF p_st = 'X' AND p_ft = 'X'.
vmess 'Please Select Upload Download Indicator.'.
ENDIF.
IF p_ft = space.
PERFORM sub_val_form.
ENDIF.
IF p_st = space.
PERFORM sub_val_style.
ENDIF.
ENDFORM. " SUB_VALIDATION
*& Form SUB_VAL_FORM
FORM sub_val_form.
DATA: l_file1(20),
l_file2(20).
IF p_fname = space.
vmess 'Please enter the form name'.
ENDIF.
IF p_fname+0(1) <> 'Z'.
IF p_fu = 'X'.
vmess 'Form name should start with ''Z'' only'.
ENDIF.
ENDIF.
IF p_ffile = space.
vmess 'Please enter the file name'.
ENDIF.
SPLIT p_ffile AT '.' INTO l_file1 l_file2.
IF l_file2 <> space.
vmess 'Don''t enter the extention with file name'.
ENDIF.
IF p_fu = 'X'.
SELECT SINGLE * FROM stxfadm WHERE formname = p_fname.
IF sy-subrc = 0.
vmess 'Form already exists'.
ENDIF.
ENDIF.
IF p_fd = 'X'.
SELECT SINGLE * FROM stxfadm WHERE formname = p_fname.
IF sy-subrc <> 0.
vmess 'Form does not exists'.
ENDIF.
ENDIF.
ENDFORM. " SUB_VAL_FORM
*& Form SUB_VAL_STYLE
FORM sub_val_style.
DATA: l_file1(20),
l_file2(20).
IF p_sname = space.
vmess 'Please enter the Style name'.
ENDIF.
IF p_sname+0(1) <> 'Z'.
vmess 'Style name should start with ''Z'' only'.
ENDIF.
IF p_sfile = space.
vmess 'Please enter the file name'.
ENDIF.
SPLIT p_sfile AT '.' INTO l_file1 l_file2.
IF l_file2 <> space.
vmess 'Don''t enter extention with file name'.
ENDIF.
IF p_su = 'X'.
SELECT SINGLE * FROM stxsadm WHERE stylename = p_sname.
IF sy-subrc = 0.
vmess 'Style already exists'.
ENDIF.
ENDIF.
IF p_sd = 'X'.
SELECT SINGLE * FROM stxsadm WHERE stylename = p_sname.
IF sy-subrc <> 0.
vmess 'Style does not exists'.
ENDIF.
ENDIF.
ENDFORM. " SUB_VAL_STYLE
*& Form SUB_WARNING
FORM sub_warning.
DATA: l_line1(50),
l_line2(50),
l_line3(50),
l_title(50).
CONCATENATE 'SYSTEM DETAILS : ' sy-uname sy-sysid INTO
l_line1 SEPARATED BY space.
IF p_fu = 'X'.
CONCATENATE 'Upload Form : ' p_fname INTO l_line2
SEPARATED BY space.
ENDIF.
IF p_fd = 'X'.
CONCATENATE 'Download Form : ' p_fname INTO l_line2
SEPARATED BY space.
ENDIF.
IF p_su = 'X'.
CONCATENATE 'Upload Style : ' p_sname INTO l_line3
SEPARATED BY space.
ENDIF.
IF p_sd = 'X'.
CONCATENATE 'Download Style : ' p_sname INTO l_line3
SEPARATED BY space.
ENDIF.
l_title = 'Upload/Download Form and Style'.
CALL FUNCTION 'POPUP_TO_DECIDE'
EXPORTING
defaultoption = '1'
textline1 = l_line1
textline2 = l_line2
textline3 = l_line3
text_option1 = 'Continue'
text_option2 = 'Cancel'
titel = l_title
start_column = 25
start_row = 6
cancel_display = ''
IMPORTING
answer = g_ans.
ENDFORM.
Vishwa. -
ALV output uploaded into ztable
Hi,
My requirement is i developed a ALV report in which the output(perticular fields) should be upload into ztable,how can i upload it,
Waiting for ur reply,
Regards,Hi,
You must have taken some function code for that SAVE button (say you have taken it as SAVE )
On which you want to save the records from alv display to ztable.
Use this code, it will modify the code in internal table from alv.
I have tried it, n its working:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = v_rep_id " report id
i_callback_pf_status_set = 'PF' " for PF-STATUS
i_callback_user_command = 'USER_COMMAND' " for User-Command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout " for layout
it_fieldcat = it_field " field catalog
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort " sort info
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* i_save = 'A'
* is_variant = wa_variant " variant name
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final " internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form USER_COMMAND
* SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
* AND EXECUTE THE APPROPIATE CODE
* -->LV_OKCODE used to capture the function code
* of the user-defined push-buttons
* -->L_SELFIELD text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
* when the function code is SAVE (SAVE button) then save data
WHEN 'SAVE'.
* to reflect the data changed into internal table
DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data.
ENDIF.
" at this point your data in internal table is changed
* refresh the ALV Grid output from internal table
l_selfield-refresh = c_check.
* save records into ztable
MODIFY <ztable> FROM TABLE <itab>. "insert if no record found else update
ENDFORM. "USER_COMMAND
Hope this helps you.
Regards,
Tarun -
Initially things worked fine. I was very pleased. I had my music library in itunes, on my Ipod nano, and a thumbdrive to back up most of my music.
When I tried to sync the music from itunes onto my new ipad mini last week it deleted the albums in itunes leaving me with only purchased itunes items in the account, On the new Ipad mini CD's from my collection could not be played but they were in fact listed. My new mac will not read the music files I backed up onto a thumb drive or show the uploaded CD music collection. Additionally when I logged into itunes with out any devices connected from my PC the itunes account was completely up to date with my CD's and purchase items in Itunes. As soon as I tried to sync it with my Ipad mini that virtual access to the collection was wiped out leaving only purchased items.
By trying to upload CD music from my Ipod nano into Itunes (originally uploaded into itunes from CD's and synced to the ipod nano in the first place, taking more than a weeks time), I am prompted to reset the entire ipod nano to factory settings (it gives no other option). I was following the instructions emailed to me from the applecare team. This was my only recourse for recovery of the lost music files, the only device left that had my album collection aside from the owned CD's. Now the ipod nano is being wiped clean and left with only the itunes purchased music ( same thing that happened with the itunes account and now the Ipad). When I disconnect the ipod nano to see if there are any albums still left on the device, it gives me an error that it was improperly disconnected.
I just wanted to add the music from itunes to my new mac and the new ipad mini. Instead I have lost all of my uploaded CD's and now have only purchased items in itunes, the new ipad mini, the new mac, and the ipod nano. I have to re-upload my entire music library into itunes/icloud from CD's again and hopefully be able to then sync it with my new devices.
However it may be better to buy the itunes purchased music on CD's from a store, Cut my losses while I can and never buy anything from apple or itunes again. Atleast I will not have my entire music collection wiped out for moving it between my own devices. Itunes match doesn't do **** either. I have wasted alot of hard earned cash on devices products and itunes purchases by converting to apple products and services.
What a big mistake.
Very dissapointed with the interface. Very Very Dissapointed!
[email protected]
[email protected]Had the same issue when I changed computers. I backed up my I-tunes files, including CDs, but I-Tunes will not recognize anything but Apple purchases now. There were 300+ CDs in that original catalog.
-
All the cd's I have bought over the years, have all been uploaded into iTunes on my Windows PC. I have tried just copying my iTunes folder across to my new iMac, but it doesn't recognise all of the music (but it does recognise some?). Can someone please tell me the best way to transfer my iTunes library from my PC to my iMac?
Thanks, CarolineCopy the entire /My Music/iTunes/ folder from your PC to /Music/ on your Mac.
-
So, I'm a little new to PowerShell and I came across a PowerShell which allow me to copy the content od a spreadsheet, into the new message in Outlook 2007. I have search and search on a way to do the same with a Word Document. I would like to
create a PowerShell Script that copies the content of a Word Document and paste that content in an email message.
I am basing my script on this
#Create and get my Word Obj
$w1 = New-Object -comobject Word.Application
$w1.Visible = $True
$UserWord = $w1.Workbooks.Open("C:\Users\hhhh\Documents\Powershell\test.docx")
#create outlook Object
$Outlook = New-Object -comObject Outlook.Application
$Mail = $Outlook.CreateItem(0)
$Mail.SentOnBehalfOfName = "[email protected]"
$Mail.Recipients.Add("[email protected]")
#Add the text part I want to display first
$Mail.Subject = "Test email"
$Mail.Body = "My Comment on the Excel Spreadsheet"
#Then Copy the Word using parameters to format it
$Mail.Getinspector.WordEditor.Range().PasteExcelTable($true,$false,$false)
#Then it becomes possible to insert text before
$wdDoc = $Mail.Getinspector.WordEditor
$wdRange = $wdDoc.Range()
$Mail.Display()
Any Help would be great!My requirements are the Word documents are a template of sorts. The document will be changes prior to its email with some changes. The other twist is that the customer might more that one recipients, and each recipient will have to have a separate
email, with the same content of the word document.
For example: Say I'm doing maintenance. The Word doc might descript that maintenance, in a set format. Once save the script is run to generate 3 to 10 email with separate recipients with the body of the email containing what was in the Word document. -
How do I share files uploaded into the Creative Cloud with other creative cloud members?
How do I share files uploaded into the Creative Cloud with other creative cloud members?
Should be easy. Try this...
In Thumbnails view, click the little triangle (pointing downward) in the lower-right corner of the asset you want to share.
In the blue icon bar that appears, click the Share icon (the third icon from the left, just right of the trash icon). The Share dialog should pop up.
In the Share dialog, enter the email address of the person with whom you want to share the asset, then click the Send Email button - they'll receive an email with a link to your asset. OR
You can also copy a link to the asset and then paste that into your own email client if you prefer. To do that, click the Link icon (looks like a "chain", and is to the right of the email "envelope" icon) - then click the Copy Link button.
Note that the Share options won't be available if your asset is set to "Private" - you can control whether an asset can be viewed (or downloaded) by others by clicking the Public/Private control (green or red "lock" icon).
You can also access the same Share controls if you click on the file to see it one-up (you can do this from either Thumbnails view or List view); click the Share icon near the upper right corner of the browser window (to the right of the asset name).
Hope that helps. -
How do I copy multiple email addresses from one email sent TO me into a new message?
How do I copy multiple email addresses from an email sent to me into a new message?
Are they in the body of the mail?
Hold your finger down in that mail until the little blue bubble pops up. One of the options should be to select all. Choose that and all will be hilighted. then a pop up comes up to copy, choose that, open your destination and hold your finger down to get the paste dialogue. -
Can I import tables, etc. created elsewhere into my mail messages?
Here's what I'd like to do. I want to create some simple lists in Numbers or Pages in the form of a table. I would then like to import that into the message body of a message in Mail. I've tried to cut and paste, but that just ends up with a jarbled mess. Any gurus out there know how to import iWork content into a Mail message? Thanks!
DanAquatic999 wrote:
While your advice is well taken my current problem is a bit simple. I have 3 e mails that I would like to add to my Mail program on my computer. Getting them from gmail to mail is the issue. My gmail account is some years old and if I switch from POP to IMAP all the stuff I deleted from Mail will return as I never deleted it from Gmail. That is my actual dilemma as Gmail now holds thousands of emails.
3 emails? mail them to yourself, move them from the inbox to the sent box when they arrive -
How can one read a Excel File and Upload into Table using Pl/SQL Code.
How can one read a Excel File and Upload into Table using Pl/SQL Code.
1. Excel File is on My PC.
2. And I want to write a Stored Procedure or Package to do that.
3. DataBase is on Other Server. Client-Server Environment.
4. I am Using Toad or PlSql developer tool.If you would like to create a package/procedure in order to solve this problem consider using the UTL_FILE in built package, here are a few steps to get you going:
1. Get your DBA to create directory object in oracle using the following command:
create directory TEST_DIR as ‘directory_path’;
Note: This directory is on the server.
2. Grant read,write on directory directory_object_name to username;
You can find out the directory_object_name value from dba_directories view if you are using the system user account.
3. Logon as the user as mentioned above.
Sample code read plain text file code, you can modify this code to suit your need (i.e. read a csv file)
function getData(p_filename in varchar2,
p_filepath in varchar2
) RETURN VARCHAR2 is
input_file utl_file.file_type;
--declare a buffer to read text data
input_buffer varchar2(4000);
begin
--using the UTL_FILE in built package
input_file := utl_file.fopen(p_filepath, p_filename, 'R');
utl_file.get_line(input_file, input_buffer);
--debug
--dbms_output.put_line(input_buffer);
utl_file.fclose(input_file);
--return data
return input_buffer;
end;
Hope this helps. -
HT5361 Is it possible to embed raw latex into a mail message to display an equation?
Hi,
Is it possible to embed raw latex (or any other meta data format like HTML) into a mail message? I would really like to be able to send equations directly without converting them to PDF or GIF first.
Thanks,
JoeI just borrowed a quadratic equation from the MathML Wikipedia site and grafted it into an HTML document. It imaged fine in Safari 7. It should be noted that neither the latest Google Chrome or FIrefox rendered the same content accurately.
Laying out your entire email message (including MathML) in HTML can be tedious. Once it is displayed in the browser, each use of the command+I will put the browser content in a new Mail compose window. So, you cannot add an equation to existing Mail composition. Select, copy and paste (or paste and match style) will not work either.
Depending on the importance you place on email equations, at one time, Design Science (MathType) claimed compatibility with Apple Mail (4.5) where you could input your equation in MathType and it could then be placed within the email. The mail recipient would not need a copy of MathType installed for this to work. MathType even allows you to key your equation in with LaTeX syntax to generate the equation.
You could check with them about functionality (or restrictions) with Mail 6 and 7 on OS X, as it might provide a more productive way to achieve your goals. -
Urgent: Error while uploading into pdf file
Hi ,
I got a requirement that converting smartform into pdf file and sending into application server, And uploading the that pdf file into presentation server once a day am geting error when uploading into pdf format from application server .
Error : There was an error while tryinging to parse an image.
Please help me out its urgent.
Thanks in advance
Regards
krishna
Edited by: krishna rao on Feb 13, 2008 12:05 PMU can use this code
Reward if useful
REPORT ZMN_PDF_UPLOAD.
data: begin of itab occurs 0,
field(256),
end of itab.
data: dsn(100) value '\usr\sap\DEV\DVEBMGS00\work\testpdf',
length like sy-tabix,
lengthn like sy-tabix.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\temp\test.pdf'
filetype = 'BIN'
importing
filelength = length
tables
data_tab = itab.
open dataset dsn for output in binary mode.
loop at itab.
transfer itab-field to dsn.
endloop.
close dataset dsn.
clear itab.
refresh itab.
*To crosscheck if it went well
open dataset dsn for input in binary mode.
do.
read dataset dsn into itab-field.
if sy-subrc = 0.
append itab.
else.
exit.
endif.
enddo.
call function 'GUI_DOWNLOAD'
exporting
filename = 'c:\temp\testn.pdf'
filetype = 'BIN'
bin_filesize = length
importing
filelength = lengthn
tables
data_tab = itab.
*Or
*Use the TCode
*CG3Z or CG3Y
*for downloading to Application Server. -
In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
SteveIn Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
Steve
Maybe you are looking for
-
Auto-complete for the email addresses in the mail app is not working
Hi, could somebody kindly help, please? I have just got a new iphone 5s after my old 5 got broken. When I got the new 5s one I had to restore everything from the back-up copy I had on my ipad or in my icloud, whatever. The problem is that in the stan
-
Advance image gallery in as3.0
hey folks i am just new to as3.0, any one mind telling me how to create a gallery like this site www.yodabaz.com
-
Injecting a watermark on images as they are viewed
We have over 60k .tif images on a Unix server. These images are engineering drawings from A to J size. When an image is selected via IE or Netscape our current proprietary viewer displays the image. We need to watermark each image when displayed or w
-
Hi. I have two sets of images with the same size and names (but with different content), located in two different folders. I want to overlay and flatten all pairs with corresponding names (that is, image1.png from set 1 with image1.png from set 2, an
-
My iPhone has developed a large amount of "other" as shown on how the capacity is used when sync in iTunes. Even eliminating songs, ovies and all other sync items it still uses 4.3 GB of other. This is a relativily new development. How can I deter