No USB power from MSI X99S Plus and no Vision from GPU.

Dear Forum,
I have build a new PC with a MSI x99S plus motherboard but when I start it up the fans start turning but I get no vision and even weirder there is no power coming out of the usb ports. I have checked every connection, I disconnected everything that was not nessesary and even tried to start up without harddrives connected. Still only the fans start turning and some leds light up but no vision and still no power to the USB ports
I have used the following components:
MSI x99S plus motherboard
MSI 3G gaming GTX 780 GPU
Seasonic G650 PSU (650 watt)
Corsair Venguance LPX DDR4 4GBx4 ram
Corsair H105 Hydro Series CPU cooler
Intel I7-5820K CPU
128 GB samsung SSD (for booting)
2 TB WD Hard drive
WD DVD Drive
Ill hope someone regonises the problem.
Also this is the first forum topic I have ever started so if I am doing something wrong please give some tips!

Quote from: arthurvanstrien on 11-October-14, 20:41:51
No I had not tried to boot it with one memory stick and well it starts up now! Many Thanks! Do you have any idea what would cause the PC not to boot with 4 ram sticks in them? What I am gonna do now is boot it with one memory stick more at the time too see if one is broken.
Many thanks!!
I am happy now
can be many things:
* defective memory stick
* defective memory slot
* incorrect memory parameters: too high memory freq., too tight timings, too low voltage, too tight command rate to handle 4 large memory stick
* not fully compatible memory sticks with current BIOS version
* could be bent-ed pins(s) on the CPU/mobo
Quote
Corsair Venguance LPX DDR4 4GBx4 ram
exact models and part numbers?

Similar Messages

Somehow a new contact became associated with my email. Now all my email has her name on it. This happens only on my iMac, not on my other Apple devices. I have removed my email from her contact card and deleted her from previous recipients on Mail.

Somehow a new contact became associated with my email. Now all my email has her name on it. This happens only on my iMac, not on my other Apple devices. I have removed my email from her contact card and deleted her from previous recipients on Mail.

Check the settings in the Accounts for Mail.
Mail > Preferences > Accounts > Click on your email Account in the left column > What appears under Full Name in the right column?
If that is the incorrect name you're describing change it to your correct name.

HT5129 everything has been moved. how do you stop it from asking any more and remove MobileMe from preferences?

everything has been moved. how do you stop it from asking any more and remove MobileMe from preferences?

Ferd II solved it.
Go to iPhoto>Preferences...>Accounts...and remove the MobileMe account. Then go to System Preferences...>MobileMe, and sign out.

Details: i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>

These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

TS4196 when I send Imessage to someone with iphone, there had received 2 message. one from my phone No: and other one from my E-mail apple ID why is that happen

hello
I just install mountain lion I try to send imessage from my MBP , every time i send the imessage to someone iphone
they received 2 mesage from me one from my mobile number and the other from the my email addres apple ID
can you tell me what is appening or how can I fix it so only one message
thanks

Go to Settings/General/Reset and choose Reset All Content and Settings. This will erase everything on the iPhone and allow you to set it up again as new with the proper Apple ID.

How activation Iphone5.Purchased used from an Iranian person and I'm from Iraq, I could not activate it because of the expense of Old Icloud possible assistance

how activation Iphone5.Purchased used from an Iranian person and I'm from Iraq, I could not activate it because of the expense of Old Icloud possible assistance

If the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you. Return the iPhone for a refund if you can.
Regards.

MSI X99S PLUS Boot Issue

So I've got a... weird one? At least not something I've encountered before. Hopefully you all can help.
My PC had been on a few days, decided to reboot and the computer wouldn't boot Windows. It went through all of the POST screens, just no windows. I get a blinking command line square. Can't type anything in. Try to restart again and select the correct boot disk just in case. Same thing except no blinking command line square.
First thought is something happened with the MBR. No problem. Plug in a bootable Win7 USB to try and repair it or at worst reinstall Windows 7. Same issue. Try to manually select the boot disk again and same result. Black screens after POST.
A bit frustrated by now, of course. I go into BIOS and see if there is anything messed up in there. Nothing looks weird but the issue keeps happening. Flip the BIOS switch thinking maybe somehow my BIOS got messed up. Same thing. Try to go into BIOS and it won't do it. Black screen soon after pressing DEL.
Switch back to the original BIOS, same thing. BIOS won't load.
I've reseated my vid card and M.2 drive. Pulled all but one stick of RAM. Haven't started unplugging devices yet. Hoping someone has some insight. Don't really want to tear down unless I have to send it in (hoping I don't).
Specs:
x99s plus (purchased November '14)
5820k
16gb DDR4 (g.skill ripjaws 4)
GTX 980
Plextor M.2 256 ssd (OS)
Samsung 840 EVO 500 ssd
Samsung 840 Pro 250 ssd
HGST 4TB hdd
Windows 7
Stock settings. No raid anything.

Quote from: JLio01 on 23-April-15, 13:42:42
Try take out the battery for more than 5 secs with the power cord unplugged, then put it back in to clear cmos. Is the Plextor M6e, UEFI or legacy?? Also try set this under BIOS: Settings--Advanced--PCI Sybsystem Settings--M.2 PCH Strap [M.2 PCH PCIE].
Plextor is the M.2 drive and set to Legacy. But I can't get it to boot from Windows USB key, either. So I don't think that's the issue.
Cleared CMOS, same issue. Black screen after post, black screen when I try to enter BIOS. :(

USB Power Error with iPod Touch and 2012 MBA

I am getting a USB power error when I connect my current generation 32 GB iPod touch to my 2012 MBA.
Since both iPod and MacAir are running current software. I am also starting to get errors from iTunes telling me that my iPod can not be accessed. Any ideas? Mac or iPod problem, or BOTH? Closest Apple store is 250 miles away, but MBA is still under original 1 year original warranty. Might be time for a visit.

If a 5G iPod,
Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.

Msi Sli plus and E5-2620v3

Hello
I am Irene,
i am a new member,
i need help please
it's a long story to explain
my desktop is broken.my brother bought a cpu and ddr4 to build a workstation but he had to left and he will back next year.he told me"meanwhile you use this cpu until i come back"
the cpu is
Xeon E5-2620v3 (2011-3)
it's an oversized cpu for me,i don't have a server, don't overcklocking,don't gaming,don't videoediting. but now i have it.
i'm choosing a mobo. i'm thinking to get MSI SLI PLUS. a very simple mobo.but on ,on Intel page and in "CPU support" there is written "Intel Xeon Processor Family is designed for servers. Some features may not support when installed on X99 series chipsets."
what does it mean?
if i put this cpu on this mobo can i install windows 8.1? can i surfing the net (facebook,youtube,instagram),watching movies in streaming, blu ray,using Word?
if i buy this mobo,have i to flash immediately the BIOS before to install cpu or i don't need it
Let me know please
Thanks

This Xeon cpu is supported on X99S SLI Plus out of the box and will work like any other 2011-v3 cpu used on this platform. It just can't be overclocked as it - unlike 5820K/5930K/5960X - does not offer an unlocked core ratio.
Because X99 is a desktop platform it will also not support server technologies like ECC Memory Support that Xeon cpus would support on a Server board. As the desktop 2011-v3 cpus would not support this technologies anyway you won't miss it.

My Cox Cable/Telephone splits to a telephone modem and a broadband modem. The BB connects via ethernet to a Cisco Linksys E2500 wi-fi (whatever). Can I plug my usb printer into the E2500, configure, and then print from my iPad?

I have just purchased an iPad 2. I have wi-fi for roku and have connected the iPad to it. I want to print to my usb printer. My connection is: Cox Cable spit to telephone and broadband. The broad band feed goes to a Cox modem and feeds the wi-fi. The Cisco Linksys E2500, wi-fi's the Roku and iPad. Can I USB from the wi-fi to the printer, configure (however), and then print from my iPad?
If not, how?
All comments will be appreciated.
Alan G. Watkins

the ipad cannot airprint to a non airprint printer.... i think that the only solution is to install helper software on a computer that has an attached printer and share it through the computer only...computer would have to be always left on
try this....http://www.collobos.com

Re: Unable to get 16 lanes with MSI x99s plus sli

I would try 1 3 and 6

de-install Command Center, then remove manually those folders:
C:\MSI and C:\Program and Files (x86)\MSI\Command Center
and install Command center again
if still hangs, then go to C:\MSI , folder, locate .log file and paste its contents
also tell the e...

Can I sync certain itmes from one itunes account and certain items from another itunes account on the same ipad?

I was wondering if an individual would be able to sync certain items from one itunes account and and items from a different itunes account to the same ipad?

You move the song files to /Users/Shared/ and then into iTunes from the other Mac OS X user account.
If you want to change the iTunes Store account associated with them, you need to redownload them from that account.
(60812)

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

How can I remove an application icon from the loc. bar and prevent it from auto loading?

I don't know the "lingo" of how-to's with Firefox; but I subscribed to www.catalogchoice.org. Somehow, the icon appears to the right of my print icon in the location bar and automatically pops-up when I go to any website. I can't find how to remove it from the toolbar and remove it from Firefox. I cancelled my subscription with them but continue to have this annoyance.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

BAPI for Create PO from Sales Order Data and POST GR from PO created

Dear,
         Can u help me how to create BAPI for Purchase Order creation from sales order Data
          what the bapi to Post GR from the PO created.
Regards,
Manoj

Hello Manoj what you have to do to create PO from PR is that
1) Use   BAPISDORDER_GETDETAILEDLIST (pass sales order number in sales_document table) and then get PR (Purchase requisition number from this BAPI.
2) Use BAPI_REQUISITION_GETDETAIL to get PR items
3) Use BAPI_PO_CREATE1 to craete PO from PR then.
to create goods movement you can use
BAPI_GOODSMVT_CREATE
REWARDS IF USEFUL.

No USB power from MSI X99S Plus and no Vision from GPU.

Similar Messages

Maybe you are looking for