No USB storage automounting in LXDE
I'm running LXDE on top of Arch. I have followed the wiki, but it still does not seem to automatically mount my USB storage devices.
I can use dmesg to see that the device is inserted and recognized. I can manually mount the device and copy files.
I have done the following:
* Check the checkbox to automatically mount inserted storage devices in PCManFM
* Ensure that udisks2 is installed
* Add the policykit file described in the troubleshooting section of the PCManFM wiki (even though the problem it describes isn't exactly my problem)
This thread appears to be completely obsolete, so though I read it I didn't glean anything actionable
It isn't clear to me whether this thread is relevant to my interests; the resolution certainly isn't.
I can use udiskie to automount the USB media. Maybe I'm dumb for thinking that LXDE (or PCManFM) should do it for me without having to run udiskie first, but I figured I'd ask in case there's an easier way I'm not aware of.
jasonwryan wrote:If you are running systemd, and have an active session, then the polkit rule is unnecessary, unhelpful even.
OK, good to know. I'll remove the rule.
Thanks for the replies. Lucke, your guess makes sense...that would explain why all the LXDE info for automounting assumes it will just automagically work, even though it clearly doesn't.
Similar Messages
-
The aim is to mount any usb storage (say, not mine one) with write rights for normal user. So, use cases with fstab and udev automounting are not acceptable.
OK, I have found this https://wiki.archlinux.org/index.php/US … ge_Devices wiki page and have tried to follow. In particular, I have:
~ $ sudo blkid -o list -c /dev/null | grep sdc1
/dev/sdc1 ext4 (not mounted) 15bfa2da-6214-4228-851e-c1207b74fc34
~ $ sudo mount -o gid=users,fmask=113,dmask=002 /dev/sdc1 /media
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
dmesg shows "Unrecognized mount option" for all these three options (I have tried to remove them one by one). Apparently, ext4 just hasn't these options. But - how to mount?Congratulations on your choice of Os ;-)
To solve this problem you can try and create a directory called /rmdisk , then start vold running:
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
if you are lucky your USB flash will show up under /rmdisk/<name> after a few seconds.
If not you should be able to see the flash with cfgadm, which list the status of USB ports (among other things).
Solaris should automatically create a /dev/dsk/ and /dev/rdsk/ entries for your flash memory, if its not automatically mounted by vold, try and stop vold using
/etc/init.d/volmgt stop
Then do a cd /dev/dsk and run an ls -lart, the USB devices should be among the last devices in that list, then mount it using:
mount -F pcfs /dev/dsk/<device> /some/directory
the device should end with s2 or p2, some flash devices might also need :c, aka /dev/dsk/<device>:c, it depends how its configured.
See man mount_pcfs for more information...
Hope this helps a bit (:
//Magnus -
How can I see file with chinese name in Sunray USB storage?
hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong weiYou might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email. -
USB storage with WRT610N....help!
After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop. Here's the specifics:
Desktop is an older Dell XPS runnings XP SP3. Desktop has three logons....for myself and my kids.
I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
I have an office laptop and I would like this to access the storage device
Eventually I will be adding more computers to the network for my kids.
I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
Through 3 separate tech support calls, each tech tried a different approach to get this to work. Nothing worked. I want to start from scratch.... What is the best way to accomplish what I want to do? After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
Thanks in advance for your help!jal4680 wrote:
After spending 4 hours (no exageration) with Linksys Level 2 tech support I am at my wits end....
I just purchased a WRT610N and want to use the USB storage feature to backup my primary desktop. Here's the specifics:
Desktop is an older Dell XPS runnings XP SP3. Desktop has three logons....for myself and my kids.
I'd also like each desktop logon to be able to access the router USB storage feature so that we have a common place for pictures, etc.
I have an office laptop and I would like this to access the storage device
Eventually I will be adding more computers to the network for my kids.
I'm also interested in using the FTP access to get to the files on the storage device when I am away from home.
Through 3 separate tech support calls, each tech tried a different approach to get this to work. Nothing worked. I want to start from scratch.... What is the best way to accomplish what I want to do? After suffering through the pain, is the WRT610N a good solution or should I return it to Amazon and do this some other way?
A final note, tech support did upgrade the WRT610N's firmware to 1.00.00.18.
Thanks in advance for your help!
The harsh reality is that the results for people trying to use the Storage Link function have been mixed, at best. Especially in trying to utilize it for a "backuP' function. The kernel used to manage the Storage Link is apparently unix/linux based, and has some difficulty playing nice with Windows based backup utilities. Additionally, there have been reports that the connectivity to the attached devices is, at times, poor. Finally, there are issues with file corruption (date/time stamps, specifically). There have been no firmware updates to deal with these issues. If your primary need is for an attached NAS solution, I would strongly recommend looking at other devices for that solution. -
My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.
According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy. -
I am trying to add music to my computer and then put it on a usb storage device
ok i havent used a computer in a very long time and the last time i did things seemed a whole lot easier. i got a new laptop for valentines day and i still aint figured this thing out. what i am trying to do is add all my music cds to my computer, make some playlists, then download the music to a usb storage device so i can have the music in my truck.
when i put a cd in my computer it pops up and it starts playing but i have no clue as what to do next. i have tried to make a playlist through the player that pops up and plays the music but aint having any luck. IM CLUELESS!!!! nothing ive tried has wroked, i need help please.
thank you in advanceHi,
The below link shows how to create playlist in Itunes. Once the playlist is created, if you are using apple Ipod or any other apple product. Then once you connect the device it will start the sync with the device and then you can start playing.
http://support.apple.com/kb/PH12340
If you are using another device, then please do mention the device to which you want to sync the music and which player are using on the system.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
Hello,
I have a Windows Server 2012 R2.
I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
on it (this machine is also a domain client in the same domain).
I will really be thankful if anyone can suggest some solution to this issue.
Please feel free to write back in-case I have missed anything obvious to be shared.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay PugaliaHi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support -
USB storage devices not being recognised
Product:
13" Macbook Pro w/ Retina Display (Late 2013 model)
OS X Yosemite (version 10.10.2)
2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
Issue:
- macbook unable to recognise USB storage devices.
- can be found on disk utility but 'greyed out'.
- cannot be found under devices in finder.
- tried restarting laptop, no effect.
- additional storage via Nifty + 64gb micro SD is working fine.
- apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
- USB-ethernet adapter appears to be working w/o problems too.
- last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
Hello everyone,
I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
I've attached a screenshot of the disk utility below as well.
If anyone could help me out then that would be greatly appreciated.
Thanks in advance!Some users on another Apple thread had success in running Kext Utility last November with similar issues.
I ran kext utility 2.6.1, restarted my computer and everything was working again. -
My Pro freezes when I connect USB storage
ok so for about a month and a half now, sometimes when I connect a USB storage device, my MBP (13 inch, from the most recent early 2011 line) will freeze. if there's an animation ont he screen, like the time machine symbol, it will keep going, but no response from keyboard or trackpad. at first it happened with a new cheap USB flash stick, so I thought it was that. but since then, once in a while it happens with my time machine USB hard drive, my android phone, and a different USB stick, none of which have had this problem before on anything, including my earlier Macbook from 2008. ideas/causes? this guy seems to have a similar problem: https://discussions.apple.com/message/15088832#15088832
Hi f,
Try an SMC Reset: http://support.apple.com/kb/HT3964 -
How to detect if there is a USB Storage in my pc? VISUAL BASIC 6.0
Hi sir.
my program has a function auto back up. so i want to detect if there is a usb or not. if there's a usb then it will be save in the available usb storage. if there is no usb it wont save and will pop up a msg box saying "There is no USB device,
please insert USB to continue back up" VB6 platform
thank you sir.Hi NikkoProgrammer,
Welcome to MSDN.
I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
WRT600N USB Storage Problems Solved
For a couple of years, I've been living with all the problems others have reported with the WRT600N USB storage - lost connections, permissions problems, rebooting the router to recover access to the USB drive, etc. I solved my problems, mostly, by switching to a DLink DIR-655 router. I assume other routers in the Dlink family that support USB devices will perform similarly.
My main problem seemed to be interference from the microwave, which is in an open kitchen/keeping room arrangement in my house. However, the bottom line is that any time I lost wireless connectivity to the router, due to the microwave or unknown causes, I'd lose access to the USB drive. This meant a trip upstairs to power cycle the router and the USB drive several times a day.
With the Dlink, I still sometimes lose wireless connectivity due to the microwave or unknown causes, but not as often. Sometimes, but not always, this will cause me to lose the USB drive access. If I do need to reboot the router, I can do so from the web based interface, something that was not possible with the WRT600N, so no more trips upstairs to perform this operation. I also find have a stronger wireless signal in my work location with the Dlink.
Dlink uses a SharePort software utility to manage the USB connection and this has to be installed on all PC's that want access to the USB device. SharePort makes a USB device appear to be a local device attached directly to the computer you're using and you can attach external drives/printers/probably USB hubs. (I've experimented only with an external USB drive.) Because of this, however, only one computer can attach to the USB device at a time - not a problem for me, but you need to be aware. The software has a mechanism for requesting access to the USB device from one computer, when the device is in use by another computers. You can also set it to automatically connect to the USB device if its available, to try a reconnect if connection is lost, and to automatically run a program when the USB device connects. Dlink says SharePort will support FAT or NTFS formatted drives and there's no known limitation on the drive size.
Dlink support doesn't seem much better than here - it took about three weeks for me to get an answer on the external drive size and formatting options. There are plenty of complaints on the Dlink support site about poor support, poor performance of SharePort, etc. So, all I can say is their router/USB device sharing has worked much better for me than my Linksys WRT600N ever worked.Welcome to the WRT600N nightmare. The Storage Link is poorly documented, and the firmware controlling it has issues. Basically, it will corrupt file date/times stamps whenever you copy files onto the attached drive. It has also been known to be a bit flaky about maintaining the drive as a connected/mapped drive. Backup programs may have difficulty accessing the drive via Storage Link. Depending on the file format you use, you may encounter file size limitations on the Storage Link drive.
I, personally, gave up after a few days of these issues mentioned above and bought extra USB hard drives for each computer in the house rather than try and use the Storage Link as a NAS.
What O/S are you using on your computer? I can try and walk you through the setup.
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost! -
V-cast setup issue; turning USB storage off
.I am trying to use V-cast. Media Manager.
I've installed the app on my Droid X and on my desktop. I have the USB cable connected and I have V-Case MM open on my desktop. Everything seems to be set to "Go" until I launch V-cast on the phone.
When I do that I get the following error: "Memory card error, card mounted or not present. Please make sure memory card is inserted and USB storage is turned off."
I know the card is present, and mounted because the Droid X comes with the card already installed.
But I went to "Settings/SD card & phone storage settings" just to be sure. It shows "Total space 14.87GB" and "Available space 14.80GB", and an "Mount SD Card" option. "Internal phone storage" shows 6.22GB of available space.
Now here's the rub.
When I plug in the USB cable in the SD card data information changes to "unavailable" and the "Unmount..." option changes to "Mount SD card".
I'm guessing the issue is with the last part of the error message: "USB storage is turned off" but I don't know how to turn it on.
What is USB storage? Is it to off site storage option Verizon offers? Am I required to "Subscribe" in order for this app to work?I believe you have to be in PC Mode not Mass Storage... Try changing that under mount options.
-
Cypress - Other hardware - Cypress At2 USB Storage Adapter
I have a USB Disk Enclosure that was working with Windows 8.1. I recently installed a Windows Update optional update titled "Cypress -
Other hardware - Cypress
At2 USB Storage Adapter" and the next time I attempted to use the disk enclosure, it did not work. When I connect the device the system makes a sound like it recognizes a device and the
Device Manager display gets redrawn (refreshes), but no device shows up in Device Manager, Disk Manager or Safely Remove
Hardware and Eject Media. I have booted, also without helping the situation. I am thinking that I should remove the update, but the "Uninstall and update" panel does not list and update title that matches the above.
Update #1: I found the same issue from two others on another MS forum that was posted yesterday: answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/crypress-a2b-usb-driver-update/96765e04-7f4a-42fb-bf37-ca98fa8fc0cc?rtAction=1395927639282
I have had MS Support remoted into my system all morning and am being told they want $99 to run their tools to fix the problem.
Update #2: After hours chatting w/MS Support, no progress. They ran lots of virus scans and repair procedures. I did make the following observation. When the USB Drive is connected, the system recognized something and chimes as described
above. What actually changes is that a "Cypress AT2 USB Storage Adapter" devices appears in the "Universal Serial Bus controllers" tree of Device Manager. When the drive is unplugged, this device disappears. Before the
Win Update that I suspect caused the problem, the drive would appear as a drive also. Note that the original behavior had the device appear as a disk, not as a removable device like a flash drive. So Windows is recognizing the storage controller,
but not presenting the attached disk as a drive in windows. Oh well, back to the MS Support Chat......
Update #3: I contacted MS Support a second time and pointed them at the “Cypress AT2 USB Storage Adapter”
that appeared when the USB Enclosure was plugged in. They poked around for a while and finally “Uninstalled” the device driver and had me unplg/plug the drive and BANG, the drive appeared.
I don’t know if it was the 5+ hours of work the first support person did or if that was the solution all along, but the drive works now.
Oh and one more thing, as I was completing the survey for the support, with not good ratings I might say, the remote control connected support person booted my computer right out from under me without a word of warning.
I guess there is more than one way to keep survey ratings high.Same problem. To solve you have to uninstall "Cypress At2 USB Storage Adapter"
removing driver files with the option suggested by the dialog box of device manager. (I'm sorry i can't use the correct words because I own the italian version)
After that, when you connect the drive, il will correctly mount the volume and do not appear Cypress device anymore. -
Is writing to flash drive always in "mass USB storage mode"?
I am trying to display JPEGs on my HDTV using a MEDIAGATE M2TV 1080P Media Player. I have written JPEG files to a flash drive and connected the flash drive to the M2TV Player, which doesn't recognize the USB flash drive. The M2TV manual says that only "mass USB storage mode is supported". Are there different modes of storage? What do I get from my mini? Also I assume that my file system is HFS+. Correct? Thanks for any help.
OwenMediagate are the people to ask if things aren't working. The questions should be about the partition table (Apple has a couple) of your flash drive (possibly the brand) and the format. (In-camera flash storage has, as you read in the Wikipedia, it's own, unique partition table.) Flash drives probably come from the box with no partition table, but only one partition (volume) formatted in FAT32. This default is rarely changed by people; so that should have worked.
The question is how to transfer your JPEG photos from a Mac hard drive to a flash drive. Only now is it occurring to me that they may just mean their box captures JPEG files and transfers then to your Mac's USB port in USB MSC protocol, not USB PTP.
My ignorance may have confused the issue more. I last studied JPEG when it was released . There was room in the file for EXIF data. However, I doubt they anticipated GPS data and more, which Macs could interpret as metadata (as they do 'keywords'), and require USB PTP protocol to transfer. Well, this is wrong.
I borrowed a JPEG photo with a huge EXIF file, containing GPS data, and changed the suffix to .TXT, opened it in TextEdit, saved it, and dragged this non-photo file (using, presumably, USB MSC protocol) to a flash drive formatted HFS. I then changed the suffix to .JPG and opened it with the Finder. Its size hadn't changed, and its EXIF data hadn't changed. So, PTP is a mystery to me: I don't know what advantages it offers, though I choose it on cameras. Perhaps Mediagate can explain it, since it's the preferred protocol for transferring photos.
If you really need to copy a photo to a flash drive in USB MSC protocol, you can always change the suffix to .TXT and back. Perhaps someone more knowledgeable can help. (I'm unfamiliar with your device.)
Best of luck.
Bruce -
[solved] USB storage devices problem
Hello everyone. I have MSI Wind U270 and recently I've moved from Ubuntu 11.04 to Arch. I really like Arch so far but I have one quite big problem and I can't find any solution, so I hope someone here could help me.
After I'd installed Arch, I tried to copy some file from/to USB flash drive. After just few seconds, transfer failed with information about I/O errors and USB flash drive disappeared along with any other USB drives connected at the same time but logitech usb mouse and keyboard continue to work.
My first thought was that it's simply broken USB drive, but same thing was happening also when I tried to move some files from/to any other USB storage device that I have.
Here is sample dmesg output after I connect device:
[ 4799.189720] usb 1-2: new high-speed USB device number 4 using ehci_hcd
[ 4799.369911] xhci_hcd 0000:06:00.0: PME# disabled
[ 4799.369935] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 4799.399707] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfeb48000-0xfeb480ff] (PCI address [0xfeb48000-0xfeb480ff])
[ 4799.399754] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 4799.399800] ehci_hcd 0000:00:13.2: PME# disabled
[ 4799.399819] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4799.426731] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4799.520213] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4799.690262] usbcore: registered new interface driver uas
[ 4799.704107] Initializing USB Mass Storage driver...
[ 4799.704420] scsi7 : usb-storage 1-2:1.0
[ 4799.704959] usbcore: registered new interface driver usb-storage
[ 4799.704966] USB Mass Storage support registered.
[ 4801.166512] scsi 7:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
[ 4801.168550] sd 7:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[ 4801.169401] sd 7:0:0:0: [sdc] Write Protect is off
[ 4801.169411] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4801.170332] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4801.170340] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4801.175736] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4801.175747] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4801.176962] sdc: sdc1
[ 4801.181454] sd 7:0:0:0: [sdc] No Caching mode page present
[ 4801.181465] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 4801.181471] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4801.388155] xhci_hcd 0000:06:00.0: PME# enabled
[ 4801.439601] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 4801.439657] ehci_hcd 0000:00:13.2: PME# enabled
[ 4801.519628] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 4802.346484] ohci_hcd 0000:00:13.0: PCI INT A disabled
and when I start to copy some things to/from USB device this is what's happening:
[ 4981.389262] ehci_hcd 0000:00:12.2: force halt; handshake ffffc90000c1e024 00004000 00000000 -> -110
[ 4981.389271] ehci_hcd 0000:00:12.2: HC died; cleaning up
[ 4981.389377] usb 1-2: USB disconnect, device number 4
[ 4981.399810] sd 7:0:0:0: [sdc] Unhandled error code
[ 4981.399820] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
[ 4981.399826] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1f b4 7e 00 00 08 00
[ 4981.399840] end_request: I/O error, dev sdc, sector 2077822
[ 4981.399850] Buffer I/O error on device sdc1, logical block 259720
[ 4981.399854] lost page write due to I/O error on sdc1
[ 4981.404451] sd 7:0:0:0: [sdc] Unhandled error code
[ 4981.404461] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
[ 4981.404467] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 20 34 7e 00 00 f0 00
[ 4981.404481] end_request: I/O error, dev sdc, sector 2110590
[ 4981.404489] Buffer I/O error on device sdc1, logical block 263816
[ 4981.404493] lost page write due to I/O error on sdc1
[ 4981.404500] Buffer I/O error on device sdc1, logical block 263817
[ 4981.404504] lost page write due to I/O error on sdc1
[ 4981.404509] Buffer I/O error on device sdc1, logical block 263818
[ 4981.404512] lost page write due to I/O error on sdc1
[ 4981.404517] Buffer I/O error on device sdc1, logical block 263819
[ 4981.404521] lost page write due to I/O error on sdc1
[ 4981.404525] Buffer I/O error on device sdc1, logical block 263820
[ 4981.404529] lost page write due to I/O error on sdc1
[ 4981.404534] Buffer I/O error on device sdc1, logical block 263821
[ 4981.404537] lost page write due to I/O error on sdc1
[ 4981.404543] Buffer I/O error on device sdc1, logical block 263822
[ 4981.404546] lost page write due to I/O error on sdc1
[ 4981.404550] Buffer I/O error on device sdc1, logical block 263823
[ 4981.404554] lost page write due to I/O error on sdc1
[ 4981.444899] usb 1-4: USB disconnect, device number 3
Next I thought – computer is broken. But it simply couldn't be true because in Ubuntu it's working.
I wanted to test if USB transfer is working in other distros, so I downloaded few and tried:
Ubuntu 11.04 – everything is working
Ubuntu 11.10 – it's not working, exactly same errors as in Arch
Ubuntu 12.04 Alpha 2 – it's not working
Mint 11 – it's working
Mint 12 – it's not working
So one thing in common that I can think of is fact that USB transfer is working in distros using kernel <3.0 and is broken in those using kernel >=3.0.
In dmesg output I can see ehci_hcd errors. When I remove this module before moving files, than everything is working fine apart from very slow transfer but it's obvious.
I really hope that someone will be able to help with my problem. I don't know if it's some bug or it's just some configuration error.
EDIT: problems were caused by rts5139 module (card reader). Blacklisting that module solved all the problems.
Last edited by wpb (2012-07-01 08:37:02)Ok, so here is part of /var/log/messages.log with failed USB transfer:
Feb 28 20:21:40 localhost kernel: [ 117.263584] usb 3-2: new high-speed USB device number 4 using ehci_hcd
Feb 28 20:21:40 localhost mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:12.2/usb3/3-2"
Feb 28 20:21:40 localhost kernel: [ 117.470130] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfeb48000-0xfeb480ff] (PCI address [0xfeb48000-0xfeb480ff])
Feb 28 20:21:40 localhost kernel: [ 117.470251] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 28 20:21:40 localhost kernel: [ 117.546266] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 28 20:21:40 localhost mtp-probe: bus: 3, device: 4 was not an MTP device
Feb 28 20:21:42 localhost kernel: [ 119.687034] usbcore: registered new interface driver uas
Feb 28 20:21:42 localhost kernel: [ 119.692675] Initializing USB Mass Storage driver...
Feb 28 20:21:42 localhost kernel: [ 119.693029] scsi7 : usb-storage 3-2:1.0
Feb 28 20:21:42 localhost kernel: [ 119.694285] usbcore: registered new interface driver usb-storage
Feb 28 20:21:42 localhost kernel: [ 119.694294] USB Mass Storage support registered.
Feb 28 20:21:43 localhost kernel: [ 120.353657] ohci_hcd 0000:00:13.0: PCI INT A disabled
Feb 28 20:21:43 localhost kernel: [ 121.110815] scsi 7:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 0 CCS
Feb 28 20:21:43 localhost kernel: [ 121.115125] sd 7:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
Feb 28 20:21:43 localhost kernel: [ 121.117132] sd 7:0:0:0: [sdc] Write Protect is off
Feb 28 20:21:43 localhost kernel: [ 121.125243] sdc: sdc1
Feb 28 20:21:43 localhost kernel: [ 121.130244] sd 7:0:0:0: [sdc] Attached SCSI removable disk
Feb 28 20:21:44 localhost kernel: [ 121.570240] ehci_hcd 0000:00:13.2: PCI INT B disabled
Feb 28 20:21:44 localhost ntfs-3g[1936]: Version 2012.1.15 external FUSE 28
Feb 28 20:21:44 localhost ntfs-3g[1936]: Mounted /dev/sdc1 (Read-Write, label "", NTFS 3.1)
Feb 28 20:21:44 localhost ntfs-3g[1936]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
Feb 28 20:21:44 localhost ntfs-3g[1936]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,fsname=/dev/sdc1,blkdev,blksize=4096,default_permissions
Feb 28 20:21:44 localhost ntfs-3g[1936]: Global ownership and permissions enforced, configuration type 1
Feb 28 20:22:11 localhost kernel: [ 148.692914] usb 3-2: USB disconnect, device number 4
Feb 28 20:22:11 localhost kernel: [ 148.756937] sd 7:0:0:0: [sdc] Unhandled error code
Feb 28 20:22:11 localhost kernel: [ 148.756947] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
Feb 28 20:22:11 localhost kernel: [ 148.756954] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1e 2f f6 00 00 18 00
Feb 28 20:22:11 localhost kernel: [ 148.756983] lost page write due to I/O error on sdc1
Feb 28 20:22:11 localhost kernel: [ 148.757000] lost page write due to I/O error on sdc1
Feb 28 20:22:11 localhost kernel: [ 148.757016] lost page write due to I/O error on sdc1
Feb 28 20:22:11 localhost kernel: [ 148.761894] sd 7:0:0:0: [sdc] Unhandled error code
Feb 28 20:22:11 localhost kernel: [ 148.761905] sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
Feb 28 20:22:11 localhost kernel: [ 148.761911] sd 7:0:0:0: [sdc] CDB: cdb[0]=0x2a: 2a 00 00 1e 2f ae 00 00 08 00
Feb 28 20:22:11 localhost kernel: [ 148.761939] lost page write due to I/O error on sdc1
Feb 28 20:22:11 localhost kernel: [ 148.914173] usb 3-4: USB disconnect, device number 3
Feb 28 20:22:24 localhost ntfs-3g[1936]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Feb 28 20:22:24 localhost ntfs-3g[1936]: Reading $BITMAP failed: Input/output error
Feb 28 20:22:24 localhost ntfs-3g[1936]: Failed to allocate clusters: Input/output error
Feb 28 20:22:24 localhost kernel: [ 161.862408] quiet_error: 2 callbacks suppressed
Feb 28 20:22:24 localhost kernel: [ 161.862424] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862436] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862446] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862457] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862466] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862476] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862485] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862495] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862505] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost kernel: [ 161.862514] lost page write due to I/O error on sdc1
Feb 28 20:22:24 localhost ntfs-3g[1936]: Unmounting /dev/sdc1 ()
and here is complete /var/log/messages.log - I just started system and then tried to copy some files to USB drive:
Maybe you are looking for
-
How can i unlocked my iphone4 for use outside u.s.
-
Using the knife vs. the pen tool to alter paths?
Is there a reason to use the Knife tool to cut up a shape VS. using the Pen tool to add or subtract additional paths?
-
Regarding billing of stock transfer goods
Hi Gurus, I am facing problem during billing of stock transferred material in CIN Process. In billing of material in VF01 it shows ZERO Amount. I have configured as per requirement. Thedetal process is as follows 1.Stock Transfer ME27 2. Delivery
-
Stop imac application folder from automatically opening at startup
How can I stop the applications folder from automatically opening?
-
Layers not casting shadows. How strange.
I've set up a comp with a light behind a large number of grey solids aranged in a grid. The light shines through the grid and onto a perpendicular solid ground-plane. The thing is, the grid solids aren't casting any shadows. Now, they're in a precomp