No user preferences to delete

This troubleshooting basics page:
http://support.apple.com/kb/HT3659
reads:
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, go to ~/Library/Preferences. Note: The tilde (~) represents your Home folder.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
Go to ~/Library/Application Support/Soundtrack Pro.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
Go to ~/Library/Application Support/Soundtrack Pro/Layouts.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
Go to ~/Library/Caches.
Remove the "com.apple.audiounits.cache" from the Caches folder.
However, I cannot find any of these files. I fear this means the app is corrupt. Please advise!
Thank you!

Similar Messages

Systems Preference is deleting an account in my Users

My Users & Groups, in Systems Preference, is "deleting an account" in order to clean this device back to its factory default settings, and its been going on for about 20 hours. How long does it take? Thanks!

Hi Ralph,
If you're looking to have that second Adobe ID you created completely erased, you'll want to email your request to our Privacy team. They can explain the risks of doing so.
If you'd like those two accounts merged under a single Adobe ID, our customer service department can help with that: http://helpx.adobe.com/contact.html
Please let me know if there's anything else we can help with!
-David

Delete user preferences

How do you delete user's preferences in aperture?
I'm suddenly having problems previewing any of my multimedia files in Aperture 3. It's not the library because I have created a new library and the problem remains. If I log in as a new user all is normal.
So anyone knows how to delete the user preferences?
I tried deleting playlists but no luck there
Thank you

Choose Go to Folder from the Finder's Go menu, enter ~/Library/Preferences/ as the path, and move everything inside which contains Aperture in its name to the desktop.
(59975)

Where does WebMail store user preferences

I have enabled WebMail on my server. Each user that logs in is able to change its preference settings at WebMail, e.g. # of msgs. shown per page, etc..
This is okay, but when I delete a user, I guess that there is a config file left somewhere.
Has anybody an idea where WebMail stores the user preferences for each user and how to properly delete them when removing a user from the system ?

/var/db/squirrelmail/data/
See pdf doc: Properly Deleting OS X 10.4.x Server Mail Users, on following page...
http://osx.topicdesk.com/downloads/
-david

Wierd files in user preferences folder

I found several folders in user preferences with names such as:
7ıêê◊8øˇÀ‡†~a|êŸlè¿ö(ø
They all showed nothing in them so I deleted them all, but they have come back again. Is this normal?
TIA

Tried your suggestion and found Photoshop Elements 4.0 created this file in user preferences:
Y‡ê◊8øˇ‘†~a|êŸlè¿ö(øˇ’P
...and opening Photoshop CS2 created this one:
Â@ê◊8øˇﬁ††~a|êŸlè¿ö(øˇﬂ
The applications seem to work OK and I have other Adobe applications as well, but did not open these as well.
Any suggestions on what to do next?
TIA

User preferences on multiple computers

Mac OSX users: has anyone tried saving and migrating their user preferences for use on another Mac? For instance, let's say I set up my desktop at home to look and function a certain way. Can I easily transfer these same settings to a work computer, assuming the OS is the same? I sometimes work onsite for various companies having consistent prefs would help me be more efficient.

finding folders by size is pretty easy, modification date is a bit harder.
Here is a script that will list all user folders over 300mb.
I will leave it to you to test and modify to delete those folders.
#!/bin/bash
#list all folders larger than 300MB in /Users
#will exclude administrator and Shared
for user in $(ls -1 /Users | grep -v "Shared" | grep -v "administrator")
do
homeSize=$(du -sm /Users/$user | cut -d"/" -f1)
if [[$homeSize -gt 300]]; then
echo "/Users/$user"
fi
done

Failed to Get User Preferences

I have 3 scripts online right now for ongoing projects that I'm trying to work on only Adobe Story just updated and now won't log me in. I keep getting the "Failed to get user preferences" error. I need to update a script tonight for a client, then prep one for a recording session tomorrow. Can I get this resolved a.s.a.p. please! My ID is [email protected]
Thanks,
John

Hi, the problem still exists: last two works don't compare anywhere:(
thanks
Date: Fri, 10 May 2013 05:15:03 -0700
From: [email protected]
To: [email protected]
Subject: Failed to get user preferences
    Re: Failed to get user preferences
    created by Sandeep (Story team) in Adobe Story - View the full discussion
Hi,
Can you please check the 'deleted' and 'sync issues' folder that shows up in the bottom left of the Story screen. Just click on these folders to see the list of documents. If your file is present in any of them, you can directly recover.
From deleted folder you can just click on the document's options (a triangle shows up when you hover on the document) and click on the triangle and then restore to a project.
If its in sync issues folder, you can delete the document (deletion will just move the document to the deleted folder mentioned above) and then go to deleted folder to restore the document.
If you still face any issue please let us know.
thanks
Sandeep
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5308591#5308591
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5308591#5308591
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5308591#5308591. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Story by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

User unable to delete calendar event "unknown error"

User is running Outlook 2013 home business, and she has a calendar entry that is linked to another mailbox .
When I browse this mailbox from OWA or Outlook client i cannot see this calendar entry.
When the user tried to delete the entry, they receive warning "unknown error" .
It appears the calendar entry is somehow linked to her Outlook profile.
How can i reset this entry without recreating her profile?
Regards

Hi
It is a recurring appointment. When you double click on the appointment it states "This is on appointment in a series. What do you want to open?" Click The entire series , and it opens the appointment in READ ONLY mode. When you click Delete
, it throws unknown error.
i have tried the following commands;
Outlook /cleansharing
outlook /cleanreminders
outlook
/cleandmrecords
outlook
/cleanfreebusy
outlook
/cleanprofile
none of which have removed this entry.
I have even tried creating another profile for the user, and this reoccurring appointment is still visible.
The appointment isn't visible on the mailbox where it was created nor is it visible when viewing both mailboxes on OWA.
here is a screen shot showing the issue.

REP-0004: Warning: Unable to open user preference file.

Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
Farooq

Please also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein

How to restrict the user(Schema) from deleting the data from a table

Hi All,
I have scenario here.
I want to know how to restrict a user(Schema) from deleting the values from a table created in the same schema.
Below is the example.
I have created a table employee in abc schema which has two values.
EMPLOYEE
ABC
XYZ
In the above scenario the abc user can only fire select query on the EMPLOYEE table.
SELECT * FROM EMPLOYEE;
He should not be able to use any other DML commands on that table.
If he uses then Insufficient privileges error should be thrown.
Can anyone please help me out on this.

Hi,
kumar0828 wrote:
Hi Frank,
Thanks for the reply.
Can you please elaborate on how to add policies for a table for just firing a select DML statement on table.See the SQL Packages and Types manual first. It has examples. You can also search the web for examples. This is sometimes called "Virtual Private Database" or VPD.
If you have problems, post a specific question here. Include CREATE TABLE and INSERT statements to create a table as it exists before the policies go into effect, the PL/SQL code to create the policies, and additonal DML statements that will be affected by the policies. Show what the table should contain after each of those DML statements.
Always say which version of Oracle you're using. Confirm that you have Enterprise Edition.
See the forum FAQ {message:id=9360002}
The basic idea behind row-level security is that it generates a string that is automatically added to SELECT and/or DML statement WHERE clauses. For example, if user ABC is only allowed to query a table on Sunday, then you might write a function that returns the string
USER != 'ABC'
OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'So whenever any user says
SELECT *
FROM    table_x
;what actually runs is:
SELECT *
FROM    table_x
WHERE   USER != 'ABC'
OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'
;If you want to prevent any user from deleting rows, then the policy function can return just this string
0 = 1Then, if somone says
DELETE employee
;what actually gets run is
DELETE employee
WHERE   0 = 1
;No error will be raised, but no rows will be deleted.
Once again, it would be simpler, more efficient, more robust and easier to maintain if you just created the table in a different schema, and not give DELETE privileges.
Edited by: Frank Kulash on Nov 2, 2012 10:26 AM
I just saw the previous response, which makes some additional good points (e.g., a user can always TRUNCATE his own tables). ALso, if user ABC applies a security policy to the table, then user ABC can also remove the policy, so if you really want to prevent user ABC from deleting rows, no matter how hard the user tries, then you need to create the policies in a different schema. If you're creating things in a different schema, then you might as well create the table in a different schema.

Downloaded free game for my iPad 2; made several in-app purchases. The game no longer works, it's happen to all users (customers). Deleting and re-downloading refreshes the game to level 1. How can I get a refund?

Downloaded free game for my iPad 2; made several in-app purchases. The game no longer works, it's happen to all users (customers). Deleting and re-downloading refreshes the game to level 1. How can I get a refund?

You can contact iTunes and ASK for a refund. Then make make an exception to their all sale are final policy.
Refunds from the App Store or iTunes - Apple Club
In the future set the restrictions so that in-app purchases are prohibited and that a password is always required.
iOS: Understanding Restrictions

Query to find out the list of user who have delete access

Hi,
I need a query to find out the list of users who have delete access on perticular folder/universe/ reports in infoview.
Please advice.
Regards,
Neo.

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Users preferences in registry

where the user preferences reader. there is an option "Display PDF in browser " need to understand where it appears in the registry.

This is not one flag in the registry. Rather, turning this preference off and on does a whole series of complicated and undocumented COM calls and who knows what. You cannot just set this in the registry. But I believe you can set it during enterprise deployment.

No user preferences to delete

Similar Messages

Maybe you are looking for