No user status in 1st post
← Every post shows the poster's name, avatar, no of posts, and join date. Except for the topic starter; these info are missing in the original post of each topic.
Suggestion: make the avatar smaller, so that there is room for these info. Why does the OP's avatar need to be four times the size of all subsequent posts?
Pat,
Until fairly recently, the originator had their post count show. In most instances, I seldom bother, but when it's their first post, I, and several others, like to extend a "Welcome to the Forums."
Have just noticed that there are many recent posts, where the poster's "count" is no longer shown.
Not sure if we can infere that it's their first post, or perhaps the post count has just been dropped completely, though I do see it for many posters and in several threads?
As a for instance, in this thread: http://forums.adobe.com/thread/1030392?tstart=0
the OP had no post count showing. Now, with their Reply, it shows "2 Posts," so that WAS their first post.
Hunt
Similar Messages
-
User Status - Restrict FI Posting
Hi All,
The scnerio in my project is as follows,
After completion of the project system status set as "TECO". I am not going to set system status as "CLSD"
After TECO, system is allowing FI-Postings to WBS Elements. I nned to restrict this posting through User Status.
1. How to go ahead?
2. If I set user status to Project definition, Will it apply to all WBS elements?
Regards
SureshHi ,
For creating user status we have to use transaction OK02
Here create a user status profile with user status NFIP- FI posting not allowed.
Select object type as WBS element and once u double click on the NFIP - FI posting not allowed u can see the system status. For the system status TECO select the radio button set. So that when u do the TECO for WBS the NFIP status will be activated.Also similarly for FI posting options select forebidden option against the individual system status.
This user status profile u have to assign to the project profile.
2.If I set user status to Project definition, Will it apply to all WBS elements? As per me this is not possible. Only PREL ie partial realeas of Project defn can restrict release of project.
Rgds -
Hi everybody,
I have created a user status for PM orders. the problem is when Order status in CNF ( confirmed ) and I use IW45 to cancel confirmation, the user status doesn't change to Release and still remain CNF. I couldn't find any business transaction for that.
what do you do for such case?
thanks in advanceHi Daniel,
I doubt that some communication gap is going on.
System Status
- An Order with status TECO CNF ... converts to REL CNF ... when the TECO cancels.
- This status further changes to REL PCNF when you cancel any Operation Confirmation (IW45).
- Similarly TECO PCNF also possible.
If I remember correctly, you were asking about User Status trigger upon change of System Status,
If you agree with the very 1st line of this post, you may start a fresh by explaining the requirements again, if possible more clearly. The probability for fresh thinking and responding from forum would increase.
Best wishes
Jogeswara Rao K -
How to update user status in CRM Order depending the delivery status in R/3
Hi All,
In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
Let me describe you clearly:
Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
I need the user status should change in CRM only when the entire deliverytakes place in R/3.
Thanx
ChinmayaWhenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status. -
Need FM for reading user status at run time in CRMD_ORDER txn.
hello all,
i need to know the FM for finding the user status on the screen.
i know there are FM's for finding the values on subject and external reference fields. similarly i want it for user status .please help me in this regard....
Thanks,
Sreekanth.Hey Shiva,
The FM for finding user status is CRM_STATUS_READ_OW
Please Reward for usefull usefull post..
Regards,
Anand.. -
User status linking between wbs and network
Dear All,
I got one requirement in which i am using user status at wbs level to block all the transactions. Now the problem which i am getting is that even though i am maintaining the user status at wbs level, users are able to post the data on network activities. If i am maintaining the user status at activity level than i am able to stop the same.
Kindly suggest cant we maintain user status at wbs level and stop fi posting at activity level. Is there any way to achieve this.
Regards
Abhishek SinhaDear Abhishek,
Use same sataus profile on Neworks also after having included Network activity & Network header as affected object types in OK02
regards,
Sam L. -
How to restrict manual setting of User Status?
Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
RajPete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj -
Revenue Recognition based on User Status of assigned Sales Order line item
Dear Community members,
We have requirement to recognize / de-recognize revenue posted to WBS for calculation of RA, based on the 'User status' of the assigned Sales Order line item.
To elaborate requirement further -
1) WBS Element - XXX - 10 ( with operative indicator - Plan/Bill/Account Assign)
2) Sales Order(SO) Line Items assigned to the above WBS -
- SO No - 123 Line Item 10 - Actual Rev - $ 300 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
- SO No - 124 Line Item 20 - Actual Rev - $ 400 - User Status - COMPL(Meaning this work is Complete , all payment received thus actual revenue for RA at WBS is $400
- SO No - 125 Line Item 10 - Actual Rev - $ 800 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
As per WBS reports Actual Revenue posted to WBS XXX-10 is $ 1500 ( $300$400$800) , however since two SO line items ( SO 123 /line item 10 and SO 125 / line Item 10 ) are NOT having User status 'COMPLETE', the actual revenue posted by those line items $ 1100/- ($300 + 800) should not be included as Actual Revenue for RA at WBS level.
Thus Actual Revenue for RA at WBS XXX-10 should be $ 400 /- ( the revenue posted by SO 124/line item 20 which has user status as 'COMPLETE')
How do above can be achieved?? Is there any standard solution for this?? Is any SAP Note available for this (I too am looking for one but not found any ) ?? do we need any enhancement , Customer exit etc
Thanks in advance
with regardsHi,
Thanks. You are right that the 'Completed Contract Method' would defer revenue recognition. However, the status checked would be of the RA object (WBS Element in this case, as RA key is on WBS and RA is being calculated on the WBS).
However, our requirement is to check the user status of the Sales Order Line items assigned to the WBS element and filter the revenues posted based on the active user status of individual Sales Order Line item.
Please give you inputs.
Thanks in advance
With regards -
Hi gurus,
A user status with existing transactions was inadvertently deleted. While it has now been created again, the transactions with this status that are created prior to the changes are now unviewable whenever the standard and customized reports are generated. Upon investigation, the former user status had a diff. code from the newly created one. We're thinking of adding a new entry on the DB table to add the status with the old code. Pls. advise. Thanks.Hi,
I am the ABAP developer tasked to investigate Ms. Ng's problem.
Completed transactions have the user status E0010.
When this user status was accidentatlly deleted, the entry E0010 (with the appropriate status profile) in the table TJ30 ceased to exist. A similar user status was then created upon discovery of the deletion. However, the new user status now had a different identifier E0011.
Custom reports have select statements with inner joins to CRM_JEST and TJ30. Since old completed transactions have E0010 in CRM_JEST but no E0010 exist in TJ30, these transactions will not be retrieved.
Is there a configuration screen which I could explicitly assign E0010 to my user status? Right now we are seriously considering direct table inserts to TJ30 and TJ30T.
Sorry for the lengthy post. Thanks in advance. -
Accounting status not "documents posted" trip can't be changed
Hi Experts,
Can you please help me on this issue ? please provide your valuable inputs ?
when user is trying to create an expense report from travel plan, getting error message , Accounting status not ' documents posted ' trip can't be changed.
Thanks in Advance.HI Lakshmi,
Once posting is done you can't edit expense as per standard. If they want to edit expense they should do enhancement.
Regards,
Nischitha -
Date and time stamp of user status does not appear
Hi, gurus.
For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP. It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
E.g.
Status Profile
Status No. --- Status Code --- Short Text
10 --- IP1L --- In Process 1st Level
20 --- IP2L --- In Process 2nd Level
Date Profile
Display Position --- Date Type
1 --- In Process 1st Level
2 --- In Process 2nd Level
We're going to create and assign a new status profile for the concerned transaction type. We'll make sure that this status profile is sychronized with the date profile. Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
Pls. help us.
Thanks in advance,
TheresaI'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No -
Can I create material reservations on setting of particular user status?
I know that Reservation creation can be kept on hold by choosing Never/Create on release etc at operation level. My requirement is , At release of work order - reservation should not be created and on setting of certain user status reservation should be created!
I think, its not possible in Standard.
You can try with some development.
You can create 2 user statuses i.e., one is for normal & another one is for reservation creation. Give the authorization to change from 1st status to 2nd status only to some authorized people through Authorization group concept.
Keep "Never" as default option in PR / Reservation creation for your desired plant & order type combination.
Once you change the user status, while saving the order, check the current user status & change it to "From Release" at order level for all operations & materials. -
USER STATUS TABLE FOR ORDER MASTER
Hi
Please reply the Data table name for the field "USER STATUS" under control data tab of Order master.
Regards
Prakash.Hi,
The statuses for orders are strored in JEST table.
Regards,
Eli
P.S. Please, avoid posting in CAPITAL letters -
The possibility to hide for displaying a user status in work order
Hello gurus,
I have following issue:
It is possible to hide only for displaying a user status in a work order when it's active?
br,
LaurentiuSee my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
PeteA -
User Status Replication-CRM to R/3
HI Gurus
Our requirement is to replicate the Item level user statuses in CRM Service order to R/3.We will use BADI- CRM_DATAEXCHG_BADI and methodCRM_DATAEXCH_AFTER_MBDOC_FILL.
Would appreciate if you can let me know how to fill the item status information into the MBDOC.By this,I mean which component to use pertaining to item level user status to fetch the info.
Thanks in advance
MadhavUse FM CRM_STATUS_READ
Hope it helps.
Lokesh
PS. Pls. reward helpful posts.
Maybe you are looking for
-
Next Slide Problem with Flash In PowerPoint
When I embed a Flash file into a PPT presentation and play Slide Show, my page down (Slide Show advance) key doesn't work once the animation is underway. If I mouse-click the outside borders, it advances properly. Any suggestions on preventing this?
-
Corrupted time machine backup on external hd connected to Airport extreme?
I have an Airport extreme 11n (not gigabit) and a Lacie external hard disk connected to the usb port. Time machine is set up to make backups wirelessly from my laptop to this external disk. It used to work fine, but no I have the following problem al
-
I cant connect to creative cloud and download my apps
Yesterday I bought the teachers edition CC, I logged in and connected to Behance. Then i wanted to download some apps and it let me download CCdesktop first. I run it and logged in and synced to Behance. But when i wanted to click the apps tab for do
-
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
-
Expand the Document Window's Page Name Area
In FW CS4, the area for the page name is too small. It truncates my page names so that I can't tell them apart like this: Is there any way to expand that are where the page name shows up on the right of the document window toolbar? Thanks!