No users available in transaction BP to create business partner

Hi, when I am in Solution Manager 4.0 (SP10), I don't see any users form the satellite system when going to transaction BP. Even when I change the date to a year back, it still won't display any users from the systems to select as BP's - there is only 1 user and that is the SOLxxxxxxx user that was created when setting up the landscapes and RFC's in SMSY. Any idea why I can't see any of the users in the satellite systems?

If I remember correctly, it was the SM_xxxx_READ RFC that gets generated from transaction SMSY, so I added SAP_ALL to the user specified in that RFC. I am not sure as to what other roles/profiles other than the default one should be added, but I guess somewhere there is a note about it. I assume the auths would be related to User Management (SU01, PFCG etc), so ask an authorisation consultant for more detail.

Similar Messages

No users available in the change period (Create Business Partner)

Hello!
I would like to set up the business partners for Service Desk.
If I choose the solution and execute "Edit --> Create Business partner"
no useres are shown under the system.
If I change the data selection for an earlier time or blank, the situation does not change, meanwile I have enough users in the satelite systems.
How can this problem be solved?
Should the user have special autzorizations?
Thank you very much!
regards
Thom

Hello!
Thank you for your response.
Unfortunately it does not connection with adding some roles to all the users in the satelite systems.
I have done this, but without success.
<b>Has someone other information how to see the users from satelite systems in Solution Manager for assigning them to the business partners?</b>
(I have SAP R/3 Enterpeise 4.7)
What very strange is: for the local Solution Manger all the users are shown.
Thank you!
regards

Role to create business partner

Hi Experts,
I am facing a problem that I want to create a role for the user and this role is for create business partner and the spacification is tat if one user careate a business partner then only that user can edit that business partner no other user can edit this business partner ( other user can see it only in display Mode).
Regards,
Sid

Hi Sid,
I must say - this is a very interesting problem !
Can you try this approach - in the event AUTH1 (accessible from transaction BUS7), register your custom module. In this custom module, you would need to check if the BP you are trying to open has been created by you or not. Allow the activity to be 'Edit' only if you are the creator of the BP.
Technically, you need to check if BUT000-CRUSR = sy-uname.
If this condition is violated, you will need to change activity mode to 03 (display).
The event AUTH1 is triggered when you open a BP or try to switch to change mode, so it will be a good point for you to control the access.
I hope this helps.
Cheers,
Rishu.

Create business partner with role 'Internet User' via BP

Hi,
We want to create business partner with role 'BUP005 Internet User'
for purpose to link with created early user su01.
It's work via isauseradm application, Web UI.
Now I want to create new role 'BUP005 Interner user' via GUI. I started Tcode BP.
I filled USERNAME, password, roles. I tried to save BP.
I got this error:
Enter the Internet user
Message no. R11214
You have maintained attributes (logon data, roles and/or fixed values) for the Internet user, without having entered the Internet user itself.
But,
Field 'INTERNETUSER' is not changeble.
Denis.

Hi, DJ
Thank you for answer)
1. Have you saved the BP. If Yes, just see if the INTERNET USER maintained is available in SU01.
Yes, but I can not see INTERNET USER in the BP.
2. If you are not able to assign the INTERNET USER, please try to maintain the INTERNET USER in BP.
I can not do it, because I can not change field INTERNET USER
3. If the INTERNET USER field is not available, just check the authorization for the same.
I has all authorization: sap_all.
Denis

Error in creating business partner through transaction FPP1 in ECC6.0

HI,
We have upgraded our system from 4.7E to ECC6.0.Now when we are trying to create business partner through transaction FPP1 we are getting error as " Exception condition "NO_ACTIVE_TAB" raised."
Can any one help us in rectifying the error and tell us the possible causes of error.. .??
Regards,
Shruti Singh

Hello,
Notes 696189 & 618123 may be of some help to you....:)
Regards
Olivia

Messagw while trying to create Business partner (BP) object for Recruiter

Hi,
We have upgraded E-Recruitment from EHp2 to EHP4.
When I tried to access Recruiter dash board through recruiter ID, I got error "You are not authorized to see this". After checking it is found that business partner object is not created for Recruiter ID. So tried to create through program RCF_Create_user. But while running this report, I am getting message like "candidate number is already exist" and I am not able to proced further. I checked relationship A650, also table HRP5102 for candidate details for this Recruiter personeel number. But no where it is available.
Could anybody please tell how to proceed on this? Where to see candidate details for an employee? How to delete candidate details if exists so that I can create business partner object again via program RCF_create_user.
Anybody's help is appreciated.
Regards,
Purnima

Hello Purnima,
as you started from an authorization error message, have you tried to assign SAP_ALL to the user and check if the application was working? Did you regenerated SAP_ALL after the upgrade as otherwise the authorization for the new application might still be missing.
I first thought the BP relation was missing after your upgrade but in your 2nd post you said you deleted CP-BP relation among others. Was this a typo or was the relation existing but the business partner missing. This would be very suprising as it is not that easy to get rid of one.
It is very strange if RCF_CREATE_USER is still not working after deleting all relations. If you only deleted one relation from CP it might be necessary to delete the other direction for all objects being internal. BUT be aware! Changing HRP1001 data this way will lead to inconsistencies in the system.
The only additional thing which comes to my mind is the integrated installation. Here the user for the candidate is not read from HRP1001 but directly from the PA infotype 0105. So there might be another candidate joined to the user this way if you use an integrated landscape.
But before you start changing hrp1001 by hand please always get the CP id for the candidate, go to SE80, open class cl_hrrcf_candidate and test the get method. (you need the cp id as you have to enter the first id on the method test screen, the others won't work due to the usage of "is supplied" in the method combined with the methgod tester). In the result check if there is really no BP Id resolved.
If the relation or the bp object really got lost during the upgrade, I'd check if this is a single case or more candidates were effected. If so I'd in every case get in contact w/ sap suppport.
Kind Regards
Roman
Edited by: Roman Weise on Mar 14, 2010 6:43 PM

Create business partner for existing employee for SAP version 4.7

Hi all !
Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
I have look in OSS and SAP forum but I have not found.
Our company need to create business partner for all existing employee but for our SAP 4.7 version.
Thanks
Hugo Nguyen

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41                     Create Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Transaction Code - MM42                     Change Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Rewards if useful.........
Minal

ERROR IN CREATING BUSINESS PARTNER ON DOING IT 2ND TIME - SAURAV LAHIRY

Hi friends,
                     I a currently using a custoM tcode zib52 to create a business partner in CRM. My problem is that on creating the first time the Busness partner it is getting created. But on pressing it in the change mode and then clicking the create patient button it is giving a short dump. I am using FM BUP_PARTNER_MAINTAIN where i am giving '01' for create.
                                                                   Regards,
                                                                   SAURAV LAHIRY[error1.htm]

Hi All,
Thanks for your quick reply.
Recently SAP has upgraded support packs and becuse of this dump is occuring. Piece of extra code has got added in existng code. We can not chage / comment that cde as the probe is in Zt-cde. But even if it is custm transaction, any standard includes havebeen used. And in sme of those include, that piece of code has got added.
Steps - First time business partner is getting created successfully. but when we save it, go back and cick on create business partner than it is going into short dump.
i had debug the code and found that GUID number is not getting cleared i second time.
can you please tell me how to clear GUID number? is there any FM / methods? Aso can you tell me hw to refresh/ clear global memory for FM BUP_PARTNER_MAINTAIN?
Thanks in advance
Saurav

Error while Creating Business partner in FPP1

Hi,
I can't create Business partner in standard T.code FPP1 in Test System and getting the following error
"Application object BUPA: Table EBUPD does not exist".
Kindly help me in solving this issue.

Hi Venkatesh
Please add the message class and message number - in this case R1 149 - next time you post a problem.
There's probably an issue with your setup with for the Business Partner Screen Layout (area menu BUPT).
The error is raised, because the EBUPD is not a table assiciated with the Business Parter (Application object BUPA). See transaction BUSG or table TBZ1H. It is in fact a dynpro structure.
Now there's a table that links the dynpro structure fields to the db table fields, which should translate the structure EBUPD into table EKUN fields: TBZ1C. Technically, this is done in function BUS_DYNFLD_TO_DBFLD_CONVERT and it returns the dynpro structure instead of the DB table if there's no corresponding entry in TBZ1C.
So please check if you can find following entry in TBZ1C (client dependent):
OBJAP DYNPTABNM DYNPFLDNM DBTABNM DBFLDNM
BUPA EBUPD + EKUN +
Or via transaction BUSP - Screen field --> Database Field
If the entry is missing I suggest you add it.
Yep
Jürgen

Dump Error while creating Business Partner in FPP1

Dear Experts,
I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
**Error in the ABAP Application Program**
**The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be terminated because it has come across a statement that unfortunately cannot be executed.**
**The following syntax error occurred in program "SAPLES02 " in include "LES02U14 " in line 30:**
**"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
Could anyone help me to resolve this issue.
Thanks in Advance,
Regards,
Aswin

Hi,
Please don't go adding fields. Aren't we talking about SAP-standard structures here?
Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
cheers
Paul Bakker

How to create Business Partner in CFM

Hello,
I want to Know which TCode should be use while creating Business Partner in CFM Module
Regards
Reshma

Dear Reshma,
Please, use the transaction "BP" in CFM module to create a business partner.
Regards,
Paulo

Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
Ram

Hi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman

Create business partner

Hello Experts,
In my ECC 6.0 system, transaction code CFM2 "Activate or Deactivate Integration Model";
The option of Create Business partner isn't there. How to activate Create Business partner in t.code CFM2?
Regards,
Aravind

Hi Chirag/ Senthil,
Thanks for the reply.
In CFM2 screen, of Activate or Deactivate Integration MOdel.
The following are the options:
Selection Criteria
Special CIF settings
Parallelized Transfer
PP/DS and SNP Planner order
Transfer Business Partner
In the current client there is no option of "Transfer Business Partners". How to get this option back?
I hope the query is clear now.
Regards,
Aravind

Create Business Partner-FPP1-issue with grouping

HI
I am trying to create business partner using FPP1 transaction with my own grouping but i am getting error.
error "You cant create a customer with grouping PS05'.
here PS05 is my own grouping with number range defined.
please check the attached screens for details.What is wrong with my grouping? am not sure.
Any help is greatly appreciated,
regards
giri

Hi Giri,
Seems like you have done the setting for BP grouping with internal number range which is fine. Please be advised that business partner groupings need to have different number ranges and different data has to be entered for each business partner type.
If you getting this error in-spite of defining the number range and assigning the number ranges in customizing then perhaps you missed out the assignment of Business Partner (BP) Type since Business Partner types can be used to group business partners.
When a BP is created, the "business partner type" appears on the initial screen and the control data screen. BP type offers grouping possibilities for business partners.
You can define and assign BP types in
Cross-Application Components->SAP Business Partner->Business Partner->Basic Settings->Define Business partner types.
BP types are defined by a unique partner type number and a description. After this you can proceed to configure field attributes in the "field grouping" as per the selected business partner type.
Let us know if you get the same error in-spite of maintaining the above mentioned settings.
Thanks,
Sagar

FM to create Business Partner GUID

Hi ,
Is there any FM / report to create Business Partner GUID in CRM ?
Thanks & Regards,
Rahul D

Hi PePe ,
Sorry for the silly question , How assign the value ( EV_GUID_16 ) to the Business partner .
Alos there is other FM that I couldnt remember , we just need to give the BP number . By executing the FM , it will create the available BP GUID by default .
Thanks & Regards,
Rahul D

No users available in transaction BP to create business partner

Similar Messages

Maybe you are looking for