No valid interval found

Hi
When I am trying to create Org Unit in PO10 I am getting an error saying "No valid interval found (internal number assignment)".
Pl let me know your suggestions.
Thanks in advance

Hi
Try this
1.sm30
2.Table name :T77IV
3.Change mode
4.Maintain the number IN as like EX  in $$$$ (if it not exsists create the entry and maintain)
hope it solves
with regards
partha
keep sharing and learning

Similar Messages

  • PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

    Hello,
    Iam facing this issue at the time of hiring (IT0000). The internal number range (01) is maintained in transaction code PA04 from
    00000001 to 90000000     and ext check box is NOT checked.  In NUMKR , the return value of the feature is also 01 .
    Now the weird thing is i get this so called error " No Valid Interval Found (Internal Number Assignment)" but if i ignore the error and hit enter / save , it lets me save IT0000 and moves on to the next infotype in infogroup.
    has anyone faced this before? what could be the possible solution here? Any help would be greatly appreciated
    thank you in advance
    Reema

    Hey Reema,
    http://www.sapfans.com/forums/viewtopic.php?f=11&t=327031
    NUMKR-Feature
    I think these are similar threads and have the same problem as you. Hope Partha Murli picks this up or you might just mail him.
    cheers
    Ajay

  • Error "No Valid Interval Found"

    I changed EX number range for the object position 01S to IN, we used this number range as an EX number range and  status to "1". 
    The number range is  99100000-99999999,this is how it looks in the system:
    No   From Number      To Number       Current Number    EX
    IN    32000000           39999999         -                           Checked  (This number range was Internal before)
    IS    99100000           99999999         1                          Not Checked. ( This number range was EX before)
    I checked the NUMKR Feature, the return value is 01.
    When I try to create a new position via P013, I am getting this error
    Error "No Valid Interval Found"
    Please help.
    Edited by: Ginasap on Oct 6, 2011 5:08 AM
    Edited by: Ginasap on Oct 6, 2011 5:22 AM

    Trying to create new entry going via SM30 to table T77IV click new entries $$P, I am getting error "Please specify a valid subgroup"
    Should it not be $$S for positions not $$P?  just thinking, anyways, I tried with $$S but getting the same error.
    Also, I am looking for number range 99000000-9999999, this was EX number range before but I would like to use it as IN number range.
    Edited by: Ginasap on Oct 6, 2011 5:39 AM

  • No valid interval found (No internal Assignment) in red message Message no.

    Dear Expert,
            When i am hiring with transaction code PA40 in ECC5.0 its says
    "No valid interval found (No internal Assignment) in red message
    Message no. 5A365
    Could you please tell me good method?
    Many thanks.
    Best Regards,
    Merry

    Hi Merry Zhang,
    Can u help me I have a same problem ?
    May be u can share me some information for your resolved issue
    Many thanks,
    -Oscar-

  • Error in SAP HCM OM No valid interval found (internal number assignment)

    Hi Experts,
    I am facing a typical problem. When ever I am trying to create any OM Object from any transaction say PO10,PO13,PO12 what ever the system is giving an error "No valid interval found (internal number assignment". I have check every thing i.e. Number Range, PLOGI PLOGI in T77S0 but the situation remains same. It seems any how the system is not at all picking up any number range at all. Please suggest.
    Samrat Sarkar

    Hi Samrat
    Reading the above posts I think you are trying to create the number range as "01S". The reason that you may not be allowed to create a number range is because your plan version might be different.
    Check the below node to see what is set as your active plan version:
    Personnel Management --> Global Settings in Personnel Management --> Plan Version Maintenance --> Set Active Plan Version
    Then while creating your number range subgroup you would have to create as PlanVersionObject type:
    Example: Number assignment for plan version 10 / object type S then Subgroup 10S
    Try this out.

  • Error executing a query (validity interval problem in variable)

    Hi all,
    I have an issue in a query.
    While executing the query  i am getting following error
    "THE VALIDITY INTERVAL HAS THE INITIAL VALUE AS LOWER LIMIT"
    There are two CALMONTH variables that are being used in the query and are also used as selection variables
    1) interval characteristic mandatory variable
    2) single value characteristic mandatory variable
    Please suggest me what might be the problem.
    Any suggestions are welcome.
    Thanks
    Mudit

    Hello,
    I tried debugging my query in RSRT and i have found a possible reason for that.
    My query was built on a multiprovider in which data was not loaded in one of the cube.Since no request was loaded in the infocube initial fields of all time characteristics were empty which was the reason for the error.
    Thanks once again for your valuable inputs.
    Mudit

  • No valid PMKID found in the MSCB

    Im having issues Roaming on the 2.4 802.11b/g/n network.....It works some of the time but then my mobile client get dissconnected..
    5508 Code 7.4.100.0
    30 APs  - AIR-CAP3602I-A-K9 
    any ideas?
    error log:
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Reassociation received from mobile on BSSID f8:4f:57:e3:00:a2
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Max Client Trap Threshold: 0  cur: 24
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Rf profile 200 Clients are allowed to AP wlan
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Re-applying interface policy for client
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 In processSsidIE:4256 setting Central switched to FALSE
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Applying site-specific Local Bridging override for station 00:90:4c:52:0e:a0 - vapId 3, site 'HQ-01', interface 'management'
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Applying Local Bridging Interface Policy for station 00:90:4c:52:0e:a0 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Applying site-specific override for station 00:90:4c:52:0e:a0 - vapId 3, site 'HQ-01', interface 'management'
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 Re-applying interface policy for client
    *apfMsConnTask_3: Jan 28 14:22:53.932: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 STA - rates (8): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 STA - rates (10): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Processing RSN IE type 48, length 38 for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Received RSN IE with 1 PMKIDs from mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: Received PMKID:  (16)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] fa 18 3d af eb a4 7a 7e 9d e9 5c 80 b4 fd f1 f1
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Searching for PMKID in MSCB PMKID cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 No valid PMKID found in the MSCB PMKID cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Trying to compute a PMKID from MSCB PMK cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: Find PMK in cache: BSSID =  (6)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] f8 4f 57 e3 00 a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: Find PMK in cache: realAA =  (6)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] f8 4f 57 e3 00 a1
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: Find PMK in cache: PMKID =  (16)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] fa 18 3d af eb a4 7a 7e 9d e9 5c 80 b4 fd f1 f1
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: AA (6)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] f8 4f 57 e3 00 a1
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: SPA (6)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] 00 90 4c 52 0e a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Unable to compute a valid PMKID from MSCB PMK cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Searching for PMK in global PMK cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: 00:90:4c:52:0e:a0 Found an entry in the global PMK cache for station 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.933: CCKM: AA (6)
    *apfMsConnTask_3: Jan 28 14:22:53.933:      [0000] f8 4f 57 e3 00 a1
    *apfMsConnTask_3: Jan 28 14:22:53.934: CCKM: SPA (6)
    *apfMsConnTask_3: Jan 28 14:22:53.934:      [0000] 00 90 4c 52 0e a0
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Unable to compute a valid PMKID from global PMK cache for mobile 00:90:4c:52:0e:a0
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Setting active key cache index 0 ---> 8
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 unsetting PmkIdValidatedByAp
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Deleted mobile LWAPP rule on AP [dc:a5:f4:64:63:90]
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Updated location for station old AP dc:a5:f4:64:63:90-0, new AP f8:4f:57:e3:00:a0-0
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 apfMsRunStateDec
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 apfMs1xStateDec
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 RUN (20) Change state to START (0) last state RUN (20)
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 START (0) Initializing policy
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 8021X_REQD (3) DHCP required on AP f8:4f:57:e3:00:a0 vapId 3 apVapId 2for this client
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 10.1.35.195 8021X_REQD (3) Plumbed mobile LWAPP rule on AP f8:4f:57:e3:00:a0 vapId 3 apVapId 2 flex-acl-name:
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 apfPemAddUser2 (apf_policy.c:276) Changing state for mobile 00:90:4c:52:0e:a0 on AP f8:4f:57:e3:00:a0 from Associated to Associated
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 apfPemAddUser2:session timeout forstation 00:90:4c:52:0e:a0 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_3: Jan 28 14:22:53.934: 00:90:4c:52:0e:a0 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_3: Jan 28 14:22:53.935: 00:90:4c:52:0e:a0 Sending Assoc Response to station on BSSID f8:4f:57:e3:00:a1 (status 0) ApVapId 2 Slot 0
    *apfMsConnTask_3: Jan 28 14:22:53.935: 00:90:4c:52:0e:a0 apfProcessAssocReq (apf_80211.c:7391) Changing state for mobile 00:90:4c:52:0e:a0 on AP f8:4f:57:e3:00:a0 from Associated to Associated
    *apfMsConnTask_3: Jan 28 14:22:53.937: 00:90:4c:52:0e:a0 Updating AID for REAP AP Client f8:4f:57:e3:00:a0 - AID ===> 103
    *dot1xMsgTask: Jan 28 14:22:53.940: 00:90:4c:52:0e:a0 Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Jan 28 14:22:53.940: 00:90:4c:52:0e:a0 dot1x - moving mobile 00:90:4c:52:0e:a0 into Connecting state
    *dot1xMsgTask: Jan 28 14:22:53.940: 00:90:4c:52:0e:a0 Sending EAP-Request/Identity to mobile 00:90:4c:52:0e:a0 (EAP Id 1)
    *apfMsConnTask_2: Jan 28 14:22:53.942: Stats update: Non Zero value
    *apfMsConnTask_2: Jan 28 14:22:53.942: Stats update: Non Zero value
    WLAN config
    WLAN Identifier.................................. 3
    Profile Name..................................... Employee
    Network Name (SSID).............................. Employee
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 166
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 86400 seconds
    User Idle Timeout................................ 28800 seconds
    --More-- or (q)uit
    User Idle Threshold.............................. 100 Bytes
    NAS-identifier................................... BLUE-5508-01
    CHD per WLAN..................................... Disabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Disabled
    mDNS Profile Name................................ unconfigured
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    PMIPv6 Mobility Type............................. none
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Per-Client Rate Limits........................... Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    --More-- or (q)uit
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Disabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ 10.0.12.72 1812
       Accounting.................................... 10.0.12.72 1813
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    --More-- or (q)uit
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Disabled
             AES Cipher.............................. Enabled
                                                                   Auth Key Management
             802.1x.................................. Enabled
             PSK..................................... Disabled
             CCKM.................................... Enabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Disabled
          GTK Randomization.......................... Disabled
    --More-- or (q)uit
          SKC Cache Support.......................... Disabled
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Enabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    --More-- or (q)uit
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled

    I am having the same problem.  5508 running 7.0.240.  System works fine for data users, but we are testing Jabber clients for the first time and see alot of lost calls while roaming between APs.  My debug client output looks just like Bryant's.  It shows a reassociation request with a PMKID provided by the client.  Then No valid PMKID found in the MSCB PMKID cache for mobile, Unable to compute a valid PMKID from MSCB PMK cache for mobile, Found an entry in the global PMK cache for station, then Unable to compute a valid PMKID from global PMK cache for mobile.  The client is then successfully reauthenticated, but the delay impacts voice calls.  What would cause this behavior?  Debug below:
    *apfMsConnTask_4: Feb 10 13:35:48.910: 88:53:95:42:e9:4f Received RSN IE with 1 PMKIDs from mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.910: Received PMKID:  (16)
    *apfMsConnTask_4: Feb 10 13:35:48.910:      [0000] 20 0f 15 45 60 e7 b3 04 57 61 19 55 ac 9c 81 36
    *apfMsConnTask_4: Feb 10 13:35:48.910: 88:53:95:42:e9:4f Searching for PMKID in MSCB PMKID cache for mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.910: 88:53:95:42:e9:4f No valid PMKID found in the MSCB PMKID cache for mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.910: 88:53:95:42:e9:4f Trying to compute a PMKID from MSCB PMK cache for mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.910: CCKM: Find PMK in cache: BSSID =  (6)
    *apfMsConnTask_4: Feb 10 13:35:48.910:      [0000] 6c 50 4d 2a b7 40
    *apfMsConnTask_4: Feb 10 13:35:48.911: CCKM: Find PMK in cache: realAA =  (6)
    *apfMsConnTask_4: Feb 10 13:35:48.911:      [0000] 6c 50 4d 2a b7 4e
    *apfMsConnTask_4: Feb 10 13:35:48.911: CCKM: Find PMK in cache: PMKID =  (16)
    *apfMsConnTask_4: Feb 10 13:35:48.911:      [0000] 20 0f 15 45 60 e7 b3 04 57 61 19 55 ac 9c 81 36
    *apfMsConnTask_4: Feb 10 13:35:48.911: 88:53:95:42:e9:4f Unable to compute a valid PMKID from MSCB PMK cache for mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.911: 88:53:95:42:e9:4f Searching for PMK in global PMK cache for mobile 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.911: 88:53:95:42:e9:4f Found an entry in the global PMK cache for station 88:53:95:42:e9:4f
    *apfMsConnTask_4: Feb 10 13:35:48.911: CCKM: AA (6)
    *apfMsConnTask_4: Feb 10 13:35:48.911:      [0000] 6c 50 4d 2a b7 4e
    *apfMsConnTask_4: Feb 10 13:35:48.911: CCKM: SPA (6)
    *apfMsConnTask_4: Feb 10 13:35:48.911:      [0000] 88 53 95 42 e9 4f
    *apfMsConnTask_4: Feb 10 13:35:48.911: 88:53:95:42:e9:4f Unable to compute a valid PMKID from global PMK cache for mobile 88:53:95:42:e9:4f

  • Problem with tcode FMCACOV "No valid configuration found"

    Hi experts
    i'm trying to prove this transaction:
    Tcode FMCACOV (program FMCA_COV) "Business Partner Overview"
    the system spits out this message:
    "No valid configuration found" Message no. FMCA_COV004
    can you help me?
    thanks!

    If this is a new domain, it could take days for all the needed name servers to get all the DNS records they need. However the registration in 2014 would indicate it is not that new http://www.dnsstuff.com/tools#whois|type=domain&&value=southcoaststeel.co.uk
    I am guessing your mail provider has an old name server record without an MX record. Although MX record support for the domain is fairly spotty see http://www.dnsstuff.com/tools#ispCacheLookup|type=domain&&value=southcoaststeel.co.uk&&recordType=MX
    They have an MX now, although the domain setup does appear to have other issues like no A record. see http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=southcoaststeel.co.uk

  • The validity interval has the initial value as lower limit

    Hi Friends,
    When i was executing a query on Multiprovider,
    got an error like
    "The validity interval has the initial value as lower limit"
                 Actually The multiprovder has been built on two infocubes 0CFM_C10 & 0CFM_C11, in those 0CFM_C10 contains the non-cumulative values.
                Even i've checked the query also in query designere it is saying like the query is correct, in that query we are using Key Date...
    please help me onthis, awaiting for your answers
    thanks in advance

    Hi you can try using inial at the update rules

  • No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER    Posted: Jan

    Hi,
    We have a PDP scenario where a channel R/3 has the RFCUSER maintained and the link is established with the ECC6.0.
    When we try to send the PR to SRM the message shows the the PR is transferred but gives an error in the SLG1 as
    "No valid requester found for user 0013
    Message no. BBP_BD002"
    The SMQ1 status is ANORETRY
    TYPE : A
    ID : BBP_EXTREQ
    NUMBER : 013
    MESSAGE : Ext. requirement cannot be created, see application log.
    If you have any solution please tell me,.
    i am waiting for reply,
    Thanks in advance.

    Santosh,
    In my recent experience this SLG1 error is usually due to the RFC user being either missing, locked or not having their password set.
    Get your Basis person to check the RFC link relevant to the transfer process in TCode SM59.
    Hope this helps
    Allen Brooks
    SRM BPO
    Sunderland City Council

  • PR no created in SRM : No valid request Found for user 0013

    Hi.  I try Send PR from ECC6.0 to SRM 7.0 
    I appobed the PR in BACK end but SC does not created in SRM side.
    in transaction SLG1 into SRM show the next message.
    No valid requester found for user 0013 .
    Previously made the next configurations
    1.- IN ECC6.0 has the RFC with USER RFC creates in SRM system i check the connection and working ok.
    2.- in PPOMA i created a new node of Unit Orgnizational to Entry channel .
    3.- I created a new RFC user and was assigned to previous Unit Organizational
    4- created a new local purcharse gruops and assigned the responsability for Entry channel and product categories are introduced.
    some idea what is missing to set?

    Hi,
    Check the below threads
    [No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER    Posted: Jan;
    [No valid requester found for user 0013 .   BBP_EXTREQ_TRANSFER;
    [BBP_EXTREQ_TRANSFER  - No valid requester found for user 0013;
    regards,
    MRao

  • Hyper-V cluster validation report "Found duplicate physical address" on nic team interfaces.

    I recently built a Windows 2012 Hyper-V cluster with 5 nodes. The validation report shows “duplicate physical address” error (error text pasted below).
    The hardware: HP BladeSystem – servers are BL460c blades, in a c7000 enclosure, connected to HP Virtual Connect switches.
    Each server has 2 physcal nics, teamed in Windows. In the NIC Teaming console, I created the following Team Interfaces and assigned each a VLAN ID:
    “Team1” (the default team)
    “Team1 - VLAN 204 – Management”
    “Team1 - VLAN 212 - 2012HB”
    “Team1 - VLAN 211 -Exchange DAG Replication”
    I also created 2 HV Virtual Switches. Neither one allows management interface to share. They are assigned to “Team1” and “Team1 - VLAN 211 -Exchange DAG Replication” respectively.
    Therefore, in Network Connection, I see the 2 physical Ethernet nics, and 4 “virtual” nics. Only 2 of them have IP addresses assigned: Management and HB. These are the two that the validation wizard complains
    about.
    The MAC address is not configurable in the NIC Teaming console, so I don’t see a way to resolve this error, except to use separate physical nics. I don’t want to do that because a) I would lose the benefits of
    the bandwidth aggregation that Virtual Connect provides, and b) When creating an Interface on a Team in Windows, it looks like it ALWAYS gives it the same MAC address, so that should be a supported configuration.
    Everything works just fine, and there are no other errors or IP conflicts or anything else. But I really want to fix it because I don’t know what unknown problems this may be causing.
    From the Cluster Validation report:
    Found duplicate physical address 10-60-4B-A9-4A-30 on node Cluster201.OurDomain.local adapter
    Team1 - VLAN 212 - 2012HB and node Cluster201.OurDomain.local adapter
    Team1 - VLAN 204 - Management.
    Found duplicate physical address F0-92-1C-13-3C-2C on node Cluster202.OurDomain.local adapter
    Team1 - VLAN 212 - 2012HB and node Cluster202.OurDomain.local adapter
    Team1 - VLAN 204 - Management.
    Found duplicate physical address 68-B5-99-C1-7E-9C on node Cluster210.OurDomain.local adapter
    Team1 - VLAN 212 - 2012HB and node Cluster210.OurDomain.local adapter
    Team1 - VLAN 204 - Management.
    Found duplicate physical address 3C-4A-92-DE-1E-74 on node Cluster211.OurDomain.local adapter VC-Team - VLAN 212 - 2012HB and node Cluster211.OurDomain.local adapter
    VC-Team - VLAN 204 - Management.
    Found duplicate physical address 68-B5-99-C0-3D-50 on node Cluster212.OurDomain.local adapter
    Team1 - VLAN 212 - 2012HB and node Cluster212.OurDomain.local adapter
    Team1 - VLAN 204 - Management.
    Thanks!
    Dan

    Hi Dan,
    "It turns out that both hosts had the same default MAC address ranges for their virtual switches. Since the host vNICs were attached to the virtual switch on each host they received the first couple of MAC addresses from the switches.
    For details please refer to following link:
    http://www.jefflafr.com/blog/4/19/2013/conflicting-mac-addresses-when-building-a-hyper-v-cluster-with-converged-networking
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Corrupt block error + valid data found ???

    Hi,
    I am getting a peculiar block corruption error in my production database (9.2.0.8).
    It also says "valid data found". I am able to analyze the suspect table without any reported issues. Can any one please suggest?
    Details from Alertlog below:-
    Corrupt block relative dba: 0x01463cbf (file 5, block 408767)
    Bad header found during user buffer read
    Data in bad block -
    type: 50 format: 0 rdba: 0x3a383020
    last change scn: 0x0338.303a3630 seq: 0xc2 flg: 0x38
    consistency value in tail: 0x36302036
    check value in block header: 0x3c27, block checksum disabled
    spare1: 0x30, spare2: 0x36, spare3: 0x1502
    Reread of rdba: 0x01463cbf (file 5, block 408767) found valid data
    Hex dump of Absolute File 5, Block 408768 in trace file d:\oracle\admin\fm\udump\fm_ora_5236.trc
    ---------------------------------------------------------------------------------------------

    Hi,
    May be this will help
    Data block corruption…..
    Regards
    Jafar

  • "No valid iViews found" error when compiling a model

    Hello,
    When I compile my model I get an error: "No valid iViews found".
    According to the WIKI this could happen if my iView doesn't contain a table or a form but it does.
    What can be the problem than?

    To answer your question "I have specifically dragged an iView object to the storyboard so I assume I'm OK.
    Where do I verify this? "
    you need to be to the level higher to your iview, either the page or the package.
    There, you can right-click your iview and select "Configure Element"
    Then, in the right pane, you've got the "Window Type" field where you can select Primary, Nested or Popup Window. It should be Primary if you have only one iView, otherwise primary for at least one of your iviews.
    Rgds,
    Karim

  • Bridge- get photos from camera... no valid files found

    I am using Photoshop CS3 on a laptop with Windows Vista and a Canon 30D camera.
    When I go to Bridge > File > Get photos from camera > select Canon EOS 30D, I get the message 'No Valid Files Found'
    What are the possible causes? There are raw files on the CF that have not been downloaded yet. This is my first attempt at downloading the photos through Bridge. I normally use the Can EOS Utility.
    Thanks for the help.
    Dale

    edit: first answer deleted because this way of copying files was stated in your original post already, sorry.
    If you are able to copy one way or an other the RAW files to a folder on your PC then point Bridge to this folder and that should be working, Try also to purge cache for that folder and renew Bridge preferences.
    I use Mac and don't know the correct way to install ACR on a PC. Have you checked the plug in info in PSCS if your ACR version is shown in the list?

Maybe you are looking for